Satellite M30: Cannot use the recovery CD - this isn't for my unit?

Similar Questions

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Satellite M30. cannot use the internal modem

  If the modem to open I get the message: the port (com3) that the modem is connected cannot be opened etc.
  In the Device Manager I can not find a com3 port at all.
  The Device Manager shows the device (modem) to work properly but when I query the modem I get again the first message.
  The log file says: open the modem device failed with error 000005aa.
  Already, just re-installed and updated.
  Any suggestions

  You install Nokia pc suite? When I installed it, I had the same problems you describe. It blocks the port 3.

• Cannot use the recovery on Satellite P100-227 disc

  I recently bought a laptop and decided to reset via the provided restore disc, to my surprise after having inserted the recovery disk and restart the notebook goes directly into Windows. Even if I went into the BIOS and set the CD/DVD drive as a starting point to the top, or even after pressing the F12 key.
  When the laptop is turned on the drive says that there is no data on the DVD, a double click on the DVD, it says 'insert the media into the DVD drive.

  My previous phone was a Toshiba Satellite 1900 303 and just to test and see if it was a problem with my recovery media, I've used the support of recovery on the P100 and it took me to the correct recovery screen. Then I swapped the media and used the recovery on the old 1900-303 Toshiba P100 and he returned to the correct recovery screen. This got me thinking so I tried a little more data CD / DVD and to my amazement it will read the DVD-R.

  No idea...

  Hello

  Have you tried to force startup from the DVD keeping C key after turning on the device?

• Re: Cannot use the recovery on Satellite L505D partition

  Hello.

  I am trying to help a friend with their Satellite L505D who had a serious virus problem. I wasn't able to run/install programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I always had problems with viruses. I also lost most of the programs on the computer. All folders were empty (except for some games), so I could not access all of the tools in this way. I could not the machine to load any Toshiba restore utility by pressing zero everything with power. I saw some recovery using F8 during the startup options and had a link to restore the original setting of Toshiba, but clicking that choice has done nothing else a break for a few seconds. I waited several minutes, clicked on it again, rebooted and tried. Nothing. As a side note, once all the while, the recovery partition was visible from explorer.exe. Not before or since.

  So I reformatted the computer with a 64-bit Win7 Home Premium Upgrade disk (the partition of restoration by leaving intact) and then enter the key for the system. Supprise, supprise, it asks me to activate within 3 days.

  My basic question is, can I access this partition recovery in a different way to use it? IE copy its contents, or start on some comand prompt to log e:?

  Thanks in advance for your suggestions.

  Hello

  To be clear: there is only one way to use the saved on the HARD drive recovery image and install it.
  Exact description step by step how you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If this does not work, only way to do it anyway is to use the recovery DVDs. It is: has your friend created these disks?

• Satellite L500 - 19 X - cannot use the recovery disk

  Well I had this phone two days ago and he used once after installing fire fox and my mobile to wide band of the driver and going to start and find it of going to happen.

  I tried SafeMode (three) and repair and all I got was a screen black with the cursor upward where it should have been a language screen (I used the recovery disc supplied with the notebook) so anyway, after finding out that I wasn't going to be able to fix it, I tried to install , but of course, this does not work, or so I put my XP 64 bit OS on and has perfectly worked, then I updated (using my own upgrade windows 7) and that works fine no problem, so I tried again with the original windows 7 comes pre-installed on the hard drive on the laptop and everything went find until she starts the installation of the driver or updates (I not 100% sure on this but it or after the installation of face recognition.

  Then it stops it of self down and boots back up to automatically restart and asking me if I want to repair due to a bad start, so I did the repair boots back to the top and still says I need to fix and can't find anything wrong and carries on in this circle.

  Now, I was told it could be the registry or there is a problem of graphics, I get pretty tired of having to install/reinstall/format this laptop.

  So if there is anyone who knows of what is wrong or what to do or whether it should be returned to fix, which will be very useful.

  I thank everyone in advance.

  Happy new year :)

  Hello

  Well, I think that it of really difficult to say what is the reason. Maybe the recovery disk is noisy or the files corrupted it.

  At the moment, I can t imagine what it s a hardware problem because other windows drive work properly.

  In your case, I would try to install Windows 7 from a Microsoft disc and then see what happens. If it works properly and that you can install all drivers & tools you need to order a new drive Toshiba Recovery directly.

  Good bye

• Cannot use the recovery for Satellite M45-S265 disc

  I tried using the recovery disk for M45-S265 of my granddaughter.

  According to the instructions that I'm supposed to put the DVD drive, and then turn off completely the machine. After that, restart and immediately hold down the F12 key, which should produce some sort of menu and then go through the recovery from there.

  However when I take the key F12 is pressed after the closing, nothing happens.

  So I'm looking for some real help here my friends. Thank you very much.

  Hello

  Can access you the BIOS as suggested by Feliks?
  Select this check box and set the CD/DVD player in the first position.

  Save the changes, and then attempts to boot from the disc of recovery again.

• Qosmio F25: Cannot use the recovery CD - bad CD message appears

  I have a Qosmio F25-AV205. When I tried to use the recovery cd set with my laptop computer, an error message appears saying that I use the wrong cd and this cd is for model F25. Only despite I have the same model that the message...

  What is the problem?

  Someone replace the motherboard of your laptop?
  Sometime, a Toshiba system has had the system board replaced, it may become impossible to image the system using the recovery CD.

  The DMI string contains the model number of the system. When you use a recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

  If the DMI string and the label on the image n t game, a bad machine or bad CD message will appear.
  In this case, you should ask the ASP in your country for assistance

• How to reformat Satellite L645-S9412D using the recovery media creator?

  This is my first laptop and I do not know. I already burn disc of recovery media creator, but I don't know how to use it. Could someone teach me how to? Thank you. And yet something, do I have to re - install the operating system when I used the recovery disk?

  Thank you for your help... :)

  With recovery disk, you can install recovery image and game for laptop to factory settings. Please note: when you do this backup data will be deleted so before that, you back up all your important data.

  When you want to use the recovery disk to do on this way:
  Start your laptop and press F12 to get into the boot menu
  When the start menu is shown on the screen, place the recovery in the optical disc drive disk
  Choose the CD/DVD in the menu and press the ENTER key
  Just follow the menu on the screen.

  Do it, test it. Check alone, how it works.

• Means of hard drive failure cannot use the recovery partition. Alas! recovery discs will not read!

  Hard drive decided to throw a wobbly and abandon me. I can't access the drive at all so decided to but a new and use the recovery at least discs bring the machine to its status as an out-of-box.

  That's the problem... It will not read the recovery disc. I know there is some stuff about it because I read in another machine. Until you tell me to change the DVD hardware... it reads very well all the other disks. I loaded Arcronis, as well as other system repair stuff, using the DVD Player/Recorder.

  I have a pukka Product Code for the software, Vista Home Basic. Can I get a Vista Home Basic disc and then use my key to sting?  I'm happy to pay a price, but do not want to buy at the price high. After all, I already paid for it once!

  Any help/suggestions will be much appreciated.

  Mr. Blue Screen.

  Hello

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Re: Portégé R700 - 15 p - cannot use the recovery on SSD 64 GB cd

  Hello

  I replaced my HARD drive to a low size of 64 GB SSD.

  Unfortunately I can not run the recovery cd, he stuck with the error "not enough space".

  I found that I got stuck when he tries to create the DATA partition (for storing the HDDRecovery)

  Any help is appreciated.

  Thank you

  Please don t create all partitions if you want to use the recovery image. Before installation of recovery partitions will be created automatically and recovery image will be copied on SSD automatically too. So please don t do something.

  Launch the installation of recovery, follow the on-screen menu and choose State factory installation.

• Satellite M30: Cannot use COM with the Modem port

  Hello

  I have a satellite m30. I have problems with the com port to use with the modem. I get an error code saying 12 resources etc. There is no i/o or IRQ conflict IRQ 04 and e/s beach is 03F8 - 03FF. I tried to uninstall various things to free resources, but still the same error.

  Any help would be greatly appreciated.

  This problem when you use the Toshiba Recovery CD?
  Try to disconnect all the external devices and install Windows from the Toshiba restore CD.

  Additional please check several comments here in the forum area Modem. I found several threads with similar issues

• Satellite L450D - cannot use the product recovery disc

  Hello

  I'm new to this forum and have spent 3 days reading this and other forums to try to solve my problem, I found a lot of answers, but none does not work for me so I'd see if I could get the thought some very great need help here.

  Now, I have the problem that when I start the laptop the windows logo appears, then Microsoft corporation through the bottom and then the screen black with the cursor of Pentecost, I tried all possible starting in the bios settings and just goes back to this screen, I can t get no prompt or anything like that , I used knoppix and managed to transfer all the files I need from my external HARD drive, so thought I would not reset to factory settings with the recovery disk of the product supplied with the notebook, the disc never has been used or taken from the package until now is so in perfect condition of the art, so I put in the drive , start computer press f12 and make the primary boot CD, but all that happens is it says windows is loading files and get back to the dreaded black screen and a cursor.

  Can someone please help?

  If you have the original Toshiba Recovery disk I assume you have older model laptop with Windows XP Home edition old. To be honest, it would be interesting to know is you.

  In any case, out of curiosity but can only begin preinstalled OS in safe mode?
  Enter the BIOS settings and set its default value initially. After ding this change BIOS boot order and place the CD/DVD as first boot device. Put recovery media in the optical disc drive, and boot up your laptop. While the laptop tries to start C press several times.

  Usually, this should force your laptop to use ODD as the first boot device.
  Long ago, I had similar problem and such combination helped to force the ODD to read the recovery disk and Windows XP Home edition recovery facility. Of course, I hope that everything is OK with your HARD drive.

  Please test and send feedback.

• Cannot use the recovery with my Satellite A100 disc

  I have the Satellite Pro A100 Series, when I boot it up it tells me "Windows could not starte because the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  I tried to restart with the recovery disk in and you press F12 for the boot menu, select CD/DVD and nothing happens.

  Any help or ideas would be great.

  Nothing happens?
  If I understand you well you are not able to boot from the disk? Have you tried another disc? I mean it might be that the recovery disk is noisy or something else.

  Check this box and give us feedback.

• New Satellite U400 cannot use the Wlan in Vista

  This is my first post! I just bought a whole new race of Toshiba Satellite U400 Vista Home Premium and I cannot get the wifi to work with my router (which works very well with a Toshiba Quosmio, philips, Nokia N85 phone and iPod laptop).

  He sometimes worked but is virtually unusable.

  I get access: Local only and whateverf as I do, I can't work properly.
  I use encryption WEP 128 bit on a router/modem US Robotics 9106.

  Any help gratefully otherwise received I will take this back to the shop because it is not a usable product.

  Thank you

  I have

  Hello

  I recommend you do the BIOS update. Here you can compare the current version on your laptop, latest on the Toshiba download page.
  Compare also the WLAN driver version.

  After BIOS update the WLAN test new functionality. In a first time without any form of encryption.
  Please post the results.