Satellite M30: FN keys not working not not after installing IE7

I installed IE7 and noticed that the fn keys no longer work. (Satellite M30)
I don't know if it was the catalyst because I do not know how long the problem has been.

The only ones I use often are FN + f6 and f7 +.
I really need to be able to adjust the brightness of the screen. Any help would be appreciated.

Thank you.

Hello

First lights up the screen can be changed also in the Toshiba Power Saver utility.

But it s very strange that, after the IE7 update the FN keys stopped working. I installed the IE7 on my laptop, and the FN keys still work very well.

So maybe it of a simply wrung something in the registry. Who knows?  :|
I recommend reinstalling the common Modules.

Maybe it helps!

Tags: Toshiba

Similar Questions

  • Satellite L450D respond does not after installing the camera software

    Hello

    I bought this month a return of the United Kingdom L450D. Yesterday I tried to install the Olympus digital camera software, but once installed would not work. Olympus site application is compatible with Windows 7, but I decided to uninstall the software. I wonder if I uninstalled something I shouldn't, because does not now.

    I have a message - Windows Explorer has stopped working with 2 options: find a solution online and restart the program or restart the program

    Problem is cursor will respond not with the touchpad. A couple of times without reply, tried FN + F9. Mouse connected, cursor moves but will not meet the comand

    Any ideas?

    Hello

    This means that camera Olympus software is causing this problem?

    Hmm you have tried to uninstall the software in safe mode? Go to the advanced boot menu (F8), select Safe mode. Then try to uninstall the usual Olympus software.

    In addition, you can try uninstalling with special tools like CCleaner. I use it often as it cleans the registry and others.
    Check it!

  • some characters on the keyboard doesn't work don't not after macos sierra installation keys on one side does not not after installing sierra on my mac pro book

    keys on one side does not not after installing sierra on my mac pro book

    Hello dssheorey,

    Thank you for using communities Support from Apple. I have a problem with your keyboard after updating is not what you expect. The good news are the following steps will help to solve your problem and get your keyboard working properly again. First, start by resetting the management system (SCM) controller on your Mac:

    Reset the management system (SCM) controller on your Mac.

    If you still having the problem after resetting the SMC, use safe mode to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Sign in to your account in safe mode and test the issue again. Then restart normally and test again to see if this problem is solved.

    Try safe mode if your Mac does not end commissioning
    Graphics performance limited in recovery of OS X or in safe mode

    See you soon!

  • AutoComplete doesn't work does not after installing IE *.

    AutoComplete URL function works does not after installing IE8.  Looking at the Advanced tab properties IE I see an option to use AutoComplete (which is
    ticked off) but it is said to "..". turn of Internet Explorer".  Whatever that means, and how I seized not semi-automatic work again under IE8?  I can go back
    for IE7, if it's the only way.   I tried to hit "reset" on the Advanced tab I saw a thread on try this - but no go...  Thank you

    sjakulski,
    Thank you for visiting the Microsoft Answers community forum.

    In Internet Explorer 8, the Auto complete option is in a new tab.  Go to tools, Internet Options and then click the content tab.  You will see a section that says "Auto-Complete".  Click on the 'Settings' button and it gives you several choices of auto complete options.

    This should solve your problem.  Let us know if you need more information.
    Thank you, Gloria
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite M40 - FN key not working not not on XP

    Hello world.

    I have a Satellite M40 (which is M43 in Australia) model number: PSM43A - 1100H, running on an XP Home Edition.
    The FN key is works but doesn't work don't not with others (F6, F7, F8 for the brightness of the screen and wireless).

    I'd appreciate any help.
    Thanks in advance.

    See you soon
    JAX

    Hello

    I think you should visit the Web from Toshiba site and reinstall all the FN keys tools. Therefore, you must download and install Hotkey Utility and Toshiba common Modules, they should be accountable for the function FN key.
    You can download everything here: http://www.mytoshiba.com.au

    Check it!

  • Satellite P850 - FN keys not working not

    I recently bought a PC Toshiba laptop p850/049 and reformatted it for windows 7 64 x (from windows 8). After installing all the software Toshiba etc. everything worked fine but recently I noticed that the special function keys have stopped working. They certainly worked after I reformatted the computer because I remember the first time annoyed that whenever I went to refresh a webpage (f5) it would pass the trackpad as I was not familiar with the new configuration.

    I thought that the problem may be due to software "Logitech setpoint" I installed but I uninstalled since and the problem remains. Then I tried to uninstall and then reinstall the added value of packet and HW installation software and then check all card flash/keyboard settings.

    Then I tried to check the BIOS setting with no luck. No matter what setting I put it to the special keys do not work. When I "special function keys" value and press function buttons, the keypad lights up but nothing happens, in this mode if I press fn + function keys, they work in their normal mode IE spell check or refresh or full screen, etc. When I have it value "normal f1-12 function keys" the same applies to this f5 refreshes successfully, but fn + f5 does nothing. I tried to play with the settings in accessibility and HW set up and flash cards and in the BIOS without effect (it seems that change the HW set up and bios configuration change from the other and vice versa).

    It seems no matter what I set it on the keyboard seems to be impossible to access the option special function keys. I recently got sp1 under win 7 x 64, this could be a part of the problem? I'm not entirely sure when keys doesn't work but I don't know they worked after reformatting to windows 7.

    any help would be appreciated

    Hello

    Did you restart the utility of Flash Cards, which can be found under:
    All programs-> Toshiba-> restart Flash Cards

    In addition, you must also install the utility Support Flash Cards next to the VAP (value added package)

    This utility can be found here:
    [Flash Card Support Utility for Win 7 64 bit v1.63.0.14 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 152 & selProduct = 7507 selSh ortMod = null & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 2 & ID = 82164 & OSI D = 30 & driverLanguage = 42]

  • Satellite M30-113 does not work well when I use FreeBSD 6.2

    Hello

    My M30-113 does not work well when I use FreeBSD 6, 2-RELEASE http://www.FreeBSD.Org/

    I was told that Toshiba has release a new bios to correct the problem of cooling, because it does not allow me to fan passive cooling in FreeBSD.

    So could we have a new bios to solve this issue?

    Arabian salvation

    I am sure that mobile industry is focused on Windows operating system and hardware architecture together and preinstalled software are adapted and also configured to run well and stable.

    This operating system is supported and if something should be better portable manufacturers offer different updates to the BIOS. Of course, you can preinstall what you want but you can not expect support for everything you can find on the market and because of this I n t believe that you won't find any update especially for FreeBSD 6.2 - RELEASE BIOS.

  • Satellite A130: Fn key not working only not with Vista - only FlashCards

    Hello

    I've been looking around in the forums, but I couldn't find solutions to my problem.

    I have a satellite A130 and I am running a windows VISTA family Basic. I have a problem with my fn functions.
    I can only use flash on the top of my screen cards, just by dragging my mouse upwards on the top of my screen.

    The key works only when I start my computer, at startup, but when the computer is running, there is no other "fn", I could use but my mouse to show my flash cards and use them.

    Is there something else I could do?
    Thank you

    I have same situation, remove the starting windows for the form Flash cards and you have no pictures at the top of the desctop, but keys will work.

  • Satellite M30-604 does not start after upgrading RAM

    I have exactly the same problem with a Satellite M30 604! I have 2x1GB sticks and screen stays black. It works if I use one of the 1 GB sticks and one the old 256 KB stick but not the 2x1GB sticks as it should be (according to the specifications of my model manual).

    Boths glue work perfectly, I tried to the sepparately.

    In addition, computer does not work with the single 1x1Gb stick, mandatory I have to combine a new (1 GB) with an old (256Kb), or just stay on the two old sticks...

    What can I do? PLEASE, I BEG YOU!

    Hello

    Satellite M30 can be upgraded up to 2 GB of RAM, but you must use compatible RAM modules.
    As far as I know, you can use the modules of PC2700 and PC - 2100 DDR SODIMM 200 pin.

    I think that you problem is certainly linked to a not entirely compatible RAM modules

  • Satellite M30-107 does not start successfully after using recovery disk

    Hello

    I recently got my hands on a toshiba Satellite M30-107 laptop second hand and decided to freshen it.
    I used the toshiba recovery disk, but after that the laptop is no longer support windows.

    When turned on it shows booting Toshiba disc for about a second then goes to a screen blank and freezes.
    When turned on, once again, a screen will appear an error by stopping and offer the opportunity to start in SafeMode etc but choose one of the options causes the machine to freeze.

    Any help or advice would be much appreciated.

    Thank you
    JT

    Hello

    Sounds a little like the laptop does not start because of the problem of Windows software
    You did not recover the M30 with the original Toshiba that was provided with this device M30 recovery CD?

    I may be wrong, but to me it looks like a recovery CD incorrect has been used and an image with drivers not compatible m has been installed

    You can try to install the OS of Microsoft Win XP original CD and could check if it would be possible to get the notebook ruin using own BONE.

    In this case we (you and me ;)) might know if this problem could be related to hardware or software.

    Good bye

  • Satellite M30-106 - does not connect via radio

    Hello
    hope someone can help im having headache with my Satellite M30-106 problems

    I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

    I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

    Regards wayne

    Hello

    If you try to connect to your router, you will ask for a password or what exactly is going on?

    Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
    http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

    Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

    What operating system do you use? Have you installed all service packs and patches?

  • Satellite M30-344 would not start

    Hello!

    I have a Toshiba Satellite M30-344.
    I have use Notepad for several weeks. Now, whenever I start the laptop computer, an error message appears: "0203: failure IDE #2 - you want to start the installation.
    Since the last use, I has not changed anything on the configuration.
    The only problem there is that I forgot to turn it off, and he continued to run under my table for more than 2 weeks.

    Is there a way to fix this?

    Thank you for your help.

    Greetings from the Germany!

    Hello

    .. Oh dear, you're not kidding? You forgot to turn it off and kept under a table? Man, that s REALLY weird. :)

    And now, to help you with your problem:
    IDE #2 means the DVD player, if you have a few options to bring your machine to life, because your DVD player might be defective.
    First of all, try to enter the BIOS and do everything by default. If you didn t get results, then remove the disc by unscrewing the screw under the drive and gently pulling the drive out
    THA machine. Alternatively, after you unscrewed, gently open the reader and then pulling it by the internal transport of the reader.

    In case of doubt, how or afraid to damage something, then bring your machine to a local ASP and they will help you with your problem.
    So, I think, your drive is probably faulty.

    Welcome them

    P.S.: And try to remember next time when what you keep under your table such as notebooks, animals, humans, gremlins... ;)

    Beautiful weekened

  • Satellite L450D Webcam does not not after installing new free recovery

    Hello

    as published in the title of the thread, I have a problem with the built-in webcam in a laptop client. Two days ago, the operating system of this laptop has been damaged by a virus and had to be put back. I tried to install it with the recovery partition, which did not work. After her, I tried to re - built it with the dvd I burned the partition recovery with the same result.

    The only thing that worked was a clean install with a detail of 64-bit windows 7 dvd and key printed on the sticker of the laptop. I managed to get everything but a part - the webcam works again.

    No driver installation, the update of the bios and the re-installation has worked to get that part to work.

    Someone of you know this problem and have a solution for me?

    Thanks in advance.

    Greetings Saphire

    PS: One thing must be as important. When I look in the Manager of devices installed the driver for the webcam is listed as usb webcam and manufacturer of Microsoft.

    Hello

    Have you tried a last webcam driver released for series such as Satellite L770D for example?

    The driver of the Webcam in the Satellite L770D section has the version 2.0.0.10. It s newer version for L450D
    Maybe you should check this.

    Here is the link
    http://Support1.toshiba-tro.de/Tedd-files2/0/webcam-20110404132417.zip

  • Network adapter (device Bluetooth (Personal Area Network) and Btooth works does not after installing W 7 Ultimate__ (Situation Reported to microsoft Hel and Support under SRX1120597135ID Without solution untill today))

    BTooth works do not after Windows Vista upgrade (Btooth works without problems) for W7
    At the moment I have problems connection BlackBerry device and other devices via Btooth
    messages 1: 'softwarfe device driver was not successfully installed ".
    message 2: "WIDDCOMM Bluetooth Software 6.1.04403 Dell Incompatible" (WIDCOMM = Broadband - manufacturer)
    In short, the list obtained messages:
    1 device driver software was not compatible
    2. incompatible software Bluetooth
    3. the drivers are not installed: lists of codes (31) (28) (10)

    Report of the final situation for Microsoft Help and Support under SRX1120597135ID (withoutany positive response so far, I have been asked to report through this forum, I hope a solution will be here)
    I tried all the options you will find in google without success.

    I contacted Dell and Bradband and I have upgraded to WIDCOMM Bluetooth Software 6.2.0.6600 available in Dell Support without positive results.

    Repost: Windows Update has nothing to do with the upgrade of Windows. Posting here instead: http://social.answers.microsoft.com/Forums/en-US/w7hardware/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Treo 700W blue tooth w/daimler Chrysler uconnect works does not after installing the update.

    Anyone having problems with his tooth of 700W overalls after installing the update? My Jeep Grand Cherokee blue tooth uconnect system worked perfectly until I installed the update. Now, it will not work. I have went through all the procedures on several occasions. The phone will discover the uconnect, but when you put the 4-digit access code that you assigned to the vehicle, it does not connect thought the secure connection. I called Verizon and Daimler Chrysler and the two do not know why this won't work. I have reset the system, uconnect on the vehicle by their instructions. Any help would be greatly appreciated.

    Message is about: Treo 700w (Verizon)

    A hard reset of the Treo has solved the problem, but you will lose all your data and applications.

    Message is about: Treo 700wx (Verizon)

Maybe you are looking for

  • Firefox never ends download

    I go through all appropriate steps to download Firefox, but the bar continues to go and download never actually. Will add a screenshot.

  • Toshiba 55 L 7453 DTV channel released in Polish version does not work

    Hello I have a big problem in Toshiba 55 L 7453 (Polish). I can't sort the channels, I can, t change the channel number, I can't change the list of channels in Polish.When I changed my TV to the German setting I can do it very easy (red, green, blue

  • HP Officejet 6100 Wireless: print hp 6100 but not Gmail or IE Windows

    My Officejet 6100 is on wireless network, and the blue light says that it is connected to the radio.  I can print documents from Microsoft and others generated by electronic mail, but cannot print e-mail (Gmail) or all screens.  Until yesterday, all

  • HP deskjet 3050 photo printing

    Which paper is best to use for photos dry quickly. I tried all the paper remains wet and tasks of the photos never checked dry.even weeks after and still stains

  • interaction of the modal dialog box with master apex 5

    HelloApex 4.2 that my links has been built with sql only for the specified lines, links point to event opening the modal dialog box.Can you tell me how should I format link to open the modal dialog box for interactive report?