Satellite M30 guard crashing after reinstalling and SP2

Hello
Can someone help me please. I have problems with my M30 Sat. It is 2 years old and I've never had problems with it before. However, I recently had an accident and decided to reinstall from the recovery CD. after reinstallation, I tried to download the service pack 2 and my computer crashes. I have not installed any other software and still keep having this problem. It's very strange because sp2 worked perfectly on my laptop until the recent accidents. Any help would be greatly appreciated, I reinstalled now for the third time and I am extremely frustrated.

the error on the crash, I received was: * stop: 0X000000f4 (0 x 00000003, 0 X 86152950, 0X86152Ac4, 0X805f9f88)

Thank you very much

Hello

That s too bad that happens. Have you checked the information of Microsoft Windows XP SP2 update on the page of the Toshiba driver? The pilot Sat M30 area, you will find the document describing which application must be updated to use the SP2.
I recommend you first check this sheet before starting any installation of SP2.

Tags: Toshiba

Similar Questions

  • After the update, CC of Photoshop crashes after launch and can not be used. How can I fix it?

    After the update, CC of Photoshop crashes after launch and can not be used. How can I fix it?

    Please try the steps listed in the following Help article.

    http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately- launch.html

    If is not working then try to reset the preferences of the Photoshop CC application.

    Please check http://helpx.adobe.com/photoshop/kb/preference-file-functions-names-locations.html to reset the Photoshop preferences.

  • Satellite M30 - error message after replacing the DVD drive

    Virgin, excused my English ;)
    I have a satellite m30 and I replaced the DVD-cd-rw drive in series with a SLIM NEC ND-6650 DOUBLE LAYER, DVD time bios gives me error
    0203: failure IDE #2
    Is it possible to remove this message?

    Hello

    As far as I know that this message can not be eliminated and it happens every time if you want to use the drive is not compatible. Always is it that all readers may not work with all models of laptops.

    In this case, fundamental problem is the pin assignment. It is not the same in all players.

    Good bye

  • Satellite M30: Are compatible SD-R6472 and R6572-SD readers?

    Hello

    the SD-R6472 and READERS of DVD - RW R6572-SD are compatible with the Toshiba Satellite M30?

    THX

    Hello

    I put t found additional information on the compatibility of the discs with the Satellite M30.
    But if you want, you can visit the Toshiba site:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=ONLINE_SHOP

    There you will find options and accessories for several units of Toshiba.
    Check it out.

    PS: You can also try to request the service of Toshiba in your country for details.

  • No sound after sp1 and sp2 update... How to fix?

    After the upgrade to sp1 and sp2 and ie9, I have no sound on my acer aspire 5610Z... has almost everything to solve the problem without success. No start the thread more don't sound, no sound on youtube, or through any browser either. Yahoo Messenger does not even recognize my microphone and speakers...

    Although, I installed the latest version of the realtek driver, I hear my sounds of yahoo pool and the speaker works... However, tests sounds in windows, does not!
    How to get her back!     .. Help!...
    Please return answer: * e-mail address is removed from the privacy *.

    Hi ClaraKlambauer,

    You get the error message?

    Method 1: Users have solved similar issue by following the steps mentioned in the link below http://answers.microsoft.com/en-us/windows/forum/windows_vista-sound/i-have-no-sound-after-installing-a-service-pack/f16247af-313a-418d-915e-6403012c25eb

    Method 2: You can follow the steps mentioned in the link below

    No noise in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  • Since the upgrade to El Capitan, Lightroom crashes after sleep and requires Force Quit. Is there any solution for this?

    It happens constantly and is extremely frustrating. Everyone knows this or does anyone know a fix?  I use an Imac, retina 5K to 27 in late 2015.

    Thanks in advance.

    Disconnect all your external drives, then check if blocking is occurring always. El capitan has made some changes that actually a bit lazy with reassembly of external hard drives after reactivation, and it's a good idea to check if the cause of your problem is the external drives. If this does not prevent blocking problems, you can reset your Lightroom preferences files. See here: http://www.lightroomqueen.com/articles-page/how-do-i-reset-lightrooms-preferences/

  • Satellite L555 - 11K - guard crashing after a few minutes

    My laptop crashes, sometimes after 20 minutes, sometimes after only a few seconds. The network is working properly and temperature says 50% although the mouse mat and a part of the keyboard becomes very unpleasantly hot.

    As far as I can tell, I have installed all drivers "updated" but why should I do it manually beats me? All my other computers do it automatically (I own and administer a crèche for children so I have several PC it). I'm starting to suspect that this laptop is a little Italian, fab in the research of design, but the mechanics are very skittish, "health monitor" showes no problem

    I'm a deep dunce with computers, but very good with kids
    Help, please
    Chi

    Post edited by: Chi
    OK just looked through the history of the forum. Try blasting some salvation air pressure inside!
    Today Toshiba said also that my serial number is not valid? yesterday, they accepted it? makes no sense

    Hey Buddy,

    Theoretically it could be caused due to a higher internal temperature because you wrote that the keyboard and the touchpad is very hot. I would recommend using jet of compressed air to blow the dust from the cooling fans. You should check out this article from Toshiba:
    [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

    Regarding automatic updates: for the driver and the tool updates you must install Toshiba TEMPRO and check that the Windows updates are enabled. ;)

  • Satellite P300 guard crashing and giving me blue screens

    Hello

    I got a Satellite P300, running on Windows Vista home premium and its provided with a card ATI Mobility Radeon HD 3650.
    My laptop crashes and send me windows and blue screens said that it is the cause of ls my graphics driver and the eror message is Atikmdag.
    I've tried everything (I think), I re - installed windows but what I had to do a restore with the current settings, because in some cd a little way my F8 function does not work so I couldn't restore my windows from my hard drive.
    I also had the latest Ati drivers, it does not help either, I also re-installed and tried to run my laptop on windows drivers, it doesn't help either.

    I don't really know what to do, can anyone help me please?

    Are you sure you're running video drivers downloaded from a site of Toshiba? Unfortunately the drivers may not be the root of the problem, so it is important to eliminate as the cause. How to remove AMD recommended driver is [http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx] and if you follow that with an installation of drivers Toshiba, then your laptop must be in a State also provided

    I would recommend that you look at this [how to troubleshoot display driver stopped responding and has recovered, errors of type ATIKMDAG.sys | http://support.amd.com/us/kbarticles/Pages/737-27116RadeonSeries-ATIKMDAGhasstoppedrespondingerrormessages.aspx]

  • Satellite 1400-104 crashes after the MBR softwarepackage

    Hello

    It is of a Toshiba Satellite 1400-103 (512 MB of memory). On startup, the Satellite works very well, no problems with surfin or broadcast, but when I run a main softwarepackage (such as Macromedia Dreamweaver or MS Word Excel), the PC freezes after a minute or two.
    I feel that the fan suddenly starts turning and the computer crashes. The only thing I can do is turn off taking the startbutton about 10 seconds, then turn it back on.
    I have already reinstalled Windows XP, but the same problem occurs after two weeks. My Antivirusprogramm works very well and I check every week on spyware and software malware.
    Does anyone have an idea about this problem?

    Thank you

    Hi emoreau

    Can you please tell me if there is the same problem without using this software package?

    The cooling fan usually begins to work if the processor speed increases and run under full power. Is this software that you use a complex and superior application?

  • Satellite A300 - 1 GM - after Windows and BIOS updated LEDs don' t work

    Hello!

    After Vista SP2 update and update BIOS (Media Player and LED power) LED buttons do not work.
    Why?

    How can I fix these buttons?

    Hello

    Satellite A300 - 1 GM belongs to the series of PSAG4E so you chose the update of the BIOS for this series of model?
    Also in the BIOS, you can enable and disable the lighting. Check this box!

    Lighting will also be controlled due to the added value package. You need to reinstall it and the Toshiba site, you can find a newer version:
    http://EU.computers.Toshiba-Europe.com

    Good bye

  • Satellite P30 - blue screen after reinstalling OS

    I reinstall OS (Windows XP) on my old laptop Toshiba Satellite P30, but after the first (required to continue XP Setup) restart the BLUEBACK screen appear (System has recovered from a serious error).

    The laptop can not load Windows XP at all. Do you have an idea of what's going on?

    Thanks :)

    Hello

    It looks like a hardware problem. You should check the RAM and HARD drive.

    http://www.HitachiGST.com/HDD/support/download.htm#DFT
    With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
    On the same site is a user's guide if you want to know more.

    http://Memtest86.com/
    Memtest86 is a diagnostic tool to check the RAM. Here, you can also download a CD image.
    It s easy to use. Run the test of 3-4 hours and then you will see if the RAM has some errors.

    Good luck!

    Good bye

  • Satellite L850: Flash crashes after updating video driver 8.982.7 AMD

    Hello

    I have this problem where I can't play a flash streaming after that I did a clean install of drivers in the subject. (8.982.7 - 120808 a (display - 20130925091525.zip))

    Flash crashes everytime.
    Flash banners are displayed, but while streaming - youtube etc does not work.

    OS: 8-64 Bit Windows
    Here is the description of the driver:
    display - 20130925091525.zip 25/09/13 v8.982.7 AMD display driver - 120808 a

    + This driver improves the functionality of display device and allows you to make various settings, such as color management, monitor properties or control of overlay. You can also get help if you have related troubleshooting display issues. +

    _Models: _ + C850 satellite, Satellite C855, L870 Satellite, Satellite L850, Satellite Pro C850, Satellite Pro C870, L875 Satellite, Satellite C875, Satellite Pro L850, Satellite C870, Satellite Pro L870 +.
    + System: 8-64 Bit Windows +.

    Driver Toshiba page provides another ADM display drivers for Win 8 64 bit.

    -8.982.7 - a 120808-1450
    -8.982.7.

    I recommend to uninstall the current driver (this in Device Manager), reboot the laptop and test one version drivers mentioned.

  • Satellite L40 - no sound after reinstalling Windows XP Home edition

    I really need help from anyone out there. I installed Windows XP Home edition on my Toshiba Satellite L40 after that I realized, there is no sound. I tried to install all kinds of updates, drivers and all, but still nothing.

    All make me is that I have no audio device.
    Grateful for the help as soon as possible.
    Holla.

    Do you have the yellow marks in Device Manager?
    Are you sure that you have installed all the drivers?

    Have you installed SP2 or SP3 for Windows XP? You must at least use SP2 for XP.

    And as said Akuma, check the Microsoft KB to the hoftixes. Before you apply this update, you must remove the driver. Otherwise it will not work.

    You can also search in the forum, there are already discussions on this topic.

  • Satellite M30: Error 0x47F after installing energy-saving

    After you have installed the Toshiba Power Saver message: 'error 0x47F' appears. And the energy saver does not work. The error after each reboot Message apears, too. I tried to reinstall the energy saver, but I'm not helping. Uninstall is impossible, since WIN XP (SP2) the same error message appears or says: cannot uninstall because it lacks file... / Uninst.exe.
    What should I do?

    Hello

    I assume that you have not used you delivered Toshiba recovery CD but only the original CD of Microsoft. However, you should check the forum for similar issues. There are several announcement about. You can use the "advanced search".
    It seems that there is no explicit solution for this stop error message. In most cases, the unit with the supplied Toshiba Recovery CD recovery have solved this problem.
    In this case, you should check for this possibility.

  • computer does not connect to the internet after reinstalling XP SP2 wit

    After that the computer we reinstalled windows XP with SP2.  The operating system loaded fine, but don't can't get the computer to connect to the internet.  Went through all the steps suggested even check the Service Manager to ensure that the appropriate services are started.  Any help would be appreciated.

    Hi DamonBrigham,
     
    -What exactly happens when you connect to the Internet? You get an error message or error code? If Yes, indicate the same.
     
    -Do you have a cable or a wireless connection?
     
    If this is a wired connection, try starting mode safe mode with network and check if you can connect to the Internet successfully.
     

    Networking Mode safe mode starts Windows in mode safe mode and includes the network drivers and services needed to access the Internet or other computers on your network.

    See this link for instructions on the boot safe mode with networking:

    A description of the options to start in Windows XP Mode

Maybe you are looking for

  • My Hotspot is not visible in the settings

    I update my iPhone to iOS 9.3 6s my hotspot is not visible in the parameter I update my iPhone of many other iOS version 9.3.1 to 9.3.3 and 9.3.4 9.3.2,and need help.

  • With the help of a laptop without battery

    Use the laptop without the battery course... because some people say its not recommended to do so if they affect other components of the laptop. So is to use a laptop without the battery safely.

  • dc7900 sff: Quadro nvs 290 in dc7900

    Hello in my dc7900 SFF and I don't have a chance. I followed these instructions without result. "When a PCIeX16 graphics card is installed in the PCI onboard VGA connector black"and display ports will be disabled automatically." What was happening is

  • CtxTwnPA Shell has stopped working

    am attempt at analysis of images in M3 recognize the system and after having chosen the scanner to get the message CtxTwnPA is has stopped working and I need to close the application? Help

  • Mass storage device USB are most recognized

    Hello! I use Cavalry 1 TB drive external HARD for a year now. It was working fine until what a week ago it stopped working all of a sudden. I can see the lights are on on the device, I can hear the disc rotation, but my computer will not recognize it