Satellite M30: How disable the BIOS boot password?


Before my vacation, I activated the startup password in the Bios. Now I want to turn this off, but it does not work. In the Bios, I can go to the Security tab, but I can't change the settings with the F5/F6 key or space. A beep is all I get. Entering on this point, I wonder to set a new password.

Anyone know how to disable the password for a Satellite M30? Please note that I have not forgotten my password, I can always start the machine.



PS On this forum, I don't see any topic title, only the name of the authors. Is always normal? It is very convenient that way, but maybe it is related to my pc.



I found a step by step explanation to clear a BIOS password:

"Turning on the computer from a State"off"with the ESC key. You are asked "password =". "

Enter the password, and then press ENTER. The unit will display: "the valid password is entered, the system starts up. Check the system. Press key (F1). »

Press the F1 key. This will start the device in the BIOS Setup mode.

Using the arrow keys or tab, move to the password field and select REGISTERED.

Press the SPACE bar, enter the password, and then press ENTER. For now, the password field is transformed into NON REGISTERED. »

Hope this will help you.
Good bye

Tags: Toshiba

Similar Questions

  • Satellite R830: How do the BIOS settings password protected?

    Hi all

    I installed a software protection against theft in my Satellite R830, but he suggested that I adjust the settings in the BIOS so that it will start only from the hard drive, and to make sure that no one else can modify it (if it is stolen), the BIOS settings are protected by Word.

    Can someone tell me how to access the BIOS at startup settings upward?


    You can set the BIOS settings by setting the BIOS password.
    If someone would like to change the BIOS settings, the password of the BIOS would be necessary.

  • Tecra S2: Question of characters with the BIOS boot password

    This is my laptop:
    Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
    Model PTS20E-18S032GR number
    purchase 30/01/2006

    My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

    When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

    When I did find the password. What can I do?


    The fact is that the BIOS password can be removed only by the service of Toshiba.
    There is no need of a special procedure that can be done only by the service man.
    There is no other way to make mobile accessible full

  • Satellite A40: How update the BIOS because I only have half of the Bios

    Hi guys

    I went to the local with my satellite A40 computer store because I only have half of the bios!
    I sent an email to support technique German toshiba and they said to try a bios update (which put bare in mind I still don't know how to do), then we have sent my laptop in a local computer store and told them the problem they do not put me to update the bios on a processor cempron.

    Why not? What are the risks in need to know.

    Please help me because I want to in the future might be upgraded to vista?

    Hello Daniel,.

    I'm a little confused about your message from Mr.
    What do you mean with half of the bios is enough?
    What s wrong with the BIOS?

    The support from Toshiba said-> try a BIOS update.
    On the Toshiba page, you can download the BIOS for Satellite A40.

    It seems you didn't check the download page detailed because on this page you will find this statement:
    IOS & FID = TRO0000000b07

    The update of the BIOS has been detailed described in this document and that you follow these guidelines for the update of the BIOS.

    Good bye

  • Security issue on Z480: how to disable the F12 boot in Z480?

    I am owner of Z480 here. In the BIOS, I put in HD as first boot. I also set the password for the BIOS. But I discovered that I can press F12 when the laptop starts to enter the boot menu and I can choose to boot from DVD or other medium.

    So how to disable F12 key start in Z480?

    Hi all

    I found a way to disable the "F12 Boot Menu": in the BIOS, check the "Password on Boot" option and the BIOS admin password. So, even when I pressed F12 at startup, the laptop computer invite you admin password to continue to the Boot Menu.

    This could give a little annoyance that I have to enter the password twice (password BIOS and OS). But it's the price of having better security.

    If anyone has a better idea or found a weakness in the way above, please let me know.

  • Satellite A200 - I forgot the BIOS password

    I have a TOSHIBA SATELLITE A200 model that I brought on Dec 2007.
    I forgot the password I gave to the BIOS, and so far, of mar16th, I am unable to go in,

    I tried to fix it through centres of local services to Chennai and Tirunelveli, but could not get the success.
    I have also filed a complaint with TOSHIBA Service Center and went to TASHIBA in Chennai service center, and they said:

    (1) remove the BIOS chip could help, but it didn't
    (2) motherboard must be changed.

    In fact, I set password BIOS and of POWERON the same thing, then...
    Is there a way to remove the BIOS/POWERON password?

    The details of my laptop are
    Model: PSAFCL-01M00P


    I wonder why the ASP in your country could not remove this password.
    Usually, the unknown password can be removed only by technician ASP.
    You will not be able to remove it!

    You need the help of the ASP!

  • How can I disable the requirement of password log on my new HP 15. I don't want

    How can I disable the requirement of password log on my new HP 15.  I don't want to.


    Try the method described in the following link.

    Kind regards

    DP - K

  • Reference Dell will not load xp. Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) tells me to disable the BIOS memory options

    Info Tech 0x000000c2 (0 x 00000043, 0xDFB25000, 0 x 00000000, 0 x 00000000) system search floppy witch, I did not. Cannot start in safe mode that is blue screen tells me to disable the BIOS memory options, but finding where to.


    1 how long have you been faced with this problem?
    2. don't you make changes on the computer before this problem?
    3. What is the full and exact error message on blue screen?

    In response to the questions above could help us help you better.

    If the system restarts after blue screen then use disable automatic restart on system failure option to stop automatic reboot.

    Here's how:

    1. turn on your computer and keep pressing the F8 key before Windows starts.
    2. now in the Advanced Boot Options, select disable automatic system failure reboot

  • HP stream 11-d001dx / 11-d010n: Bios boot password

    Please help I need a BIOS boot password
    Recovery for my computer code
    Stream HP model number
    11 - d001dx or d010nr-11, I get this message
    System disabled


    Enter 41730520

    Kind regards

    DP - K

  • HP Pavilion G6-1011sx: HP Pavilion G6 I forgot the bios administrator password

    I forgot the bios administrator password.
    It's that I received the error code: 84935186

    Please help, thanks


    Enter 31693108

    Kind regards

    DP - K

  • My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc. What should I do with it?

    My computer will display the BIOS boot screen then do nothing yet, I insert the Windows installation disc and I press F11, 12 > no response, F10 > BIOS Setup. What should I do with it?

    Brand: HP
    Type: laptop
    Model No.: Pavilion zt3000
    512 MB DDR1 RAM
    Thank you very much!

    Hi Dominic,

    Are you able to get into BIOS to make changes?

    If so, you can try to reset the default settings of the BIOS and check.

    NOTE: Change (CMOS) BIOS/complementary metal oxide semiconductor settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

    You can also try to remove all external usb devices that can be connected to the system and start-up and see if the system boots.

  • one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes

    original title: supervisor password

    one of my pc has placed on the bios supervisor password. now I need to use the bios settings to make some changes, and I don't remember the password. What can I do to fix this?

    any practical advice will be much appreciated.


    Check with support from the manufacturer of your system (manufacturer of motherboard for customized systems)
    or a real computer store (that makes its own domestic service).

    The Microsoft Community cannot help with password lost or forgotten by Microsoft Policy.

    Keep secure passwords - Microsoft strategy on move the passwords

    I hope this helps.
    Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

  • How can I disable the BIOS on the Satellite M70-169 password

    I bought a satellite laptop series satellite-169 number.

    I registered the password using the Toshiba help utility that has been placed on the desktop, using the secure user function. After stop of the laptop and turned on, it prompted me to enter the password before it can start. When I entered the password which I thought I had entered windows using the Toshiba help utility under secure user, it gives me a message of invalid password whenever I try to enter the password. So I can't use my laptop.

    I have need of your advice and assistance.

    Bwalya keny Benny
    P.O Box R/W 50278

    [Edited by: admin]

    Hi BKB

    I don't know which characters you used to create the BIOS password, but I hope that you do not use certain exotic signs. You can delete the existing password only if you use the right one.

    Another way to contact Toshiba partner in your country, and they will do it for you. Contact your local dealer and ask them for recommendation or check this page

    Good bye

  • Re: How to disable the BIOS on Satellite Pro A300 - 1 2 pass?

    I have a Toshiba Satellite Pro A300 - 1 2, some how the BIOS got locked and a startup password has been enabled, I tried to get in the BIOS to disable the startup password but without any job.

    What I need to send or take it back to Toshiba to take them off for me?

    Thank you for your time.

    If the BIOS password does not work for you, you need professional help. Contact the nearest Toshiba service and they can remove it for you.

  • How to disable the BIOS password

    Hi Please help me, my hp Pavilion dv6-2112sa always ask me password of Directors whenever I have on my computer.i password but do not know how to disable the it.pls help


    You can remove the need for a power on password as follows.

    Shut down the laptop.  Now on TAP the ESC key as soon as you press the power button to access the start menu, then select f10 to open the Bios menu.  Use the arrows to select the Security tab and press ENTER.  Use the arrow keys again to highlight the power on password and press ENTER.  Enter the current password and then for the new password, just leave this blank and press on enter – do the same for the confirmation field.  Press f10, select this option to save the new settings and press to enter.

    Kind regards

    DP - K

Maybe you are looking for

  • / System/Library of the El Capitan initialization process

    Hello When I list all processes that are running on my mac os session, it shows me tons and tons of process/System/Library, associated with "Image Capture", "AOSKit", etc. Is this normal? I did not remember to initialize? I only Chrome, BetterTouch,

  • Blockages of Safari - not loaded Web content

    Hello My Safari loads web pages.  It opens briefly and crashes.  Yahoo, Google and others do not work. Here is the error message. MacBook Pro 15 inch, early 2011, Running OS X 10.11.4, Safari version 9.1 Help, please! Process:

  • How to get photos and videos from mobile phone Satellite L450D-128

    Hello I have a series of Satellite/Satellite L450D/Satellite L450D-128 and I'm a bit thick, I also have a samsung 5600 that I want to get the photos/videos-I tried to connect my phonebut he could not connect the driver and seemed to have a lot of pro

  • ThinPro with VMware View USB Redirection

    Hi all: I'm trying to configure my workstation (t620 ThinPro 5.1 running) to start required services necessary for USB with VMware View forwarding at startup.  I tried to add the command to /etc/rc.local and created my own init.d script, but none of

  • Recovery on HP mini 110/3530NR

    Hi, my laptop must be reset to its factory condition. The partition recovery seems to have disappeared as well as the Recovery Manager and pressing F11 will start not the Panel of system recovery, or anything like that. I don't have the recovery disk