Satellite M30: random characters came on the screen even when installing
Hello
I have problems with my Satellite M30. It shows random characters or signs on the image. Other than this computer works well. I thought it could be virus, because I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
So I reinstalled it but random characters came on the screen even when installing. If anyone can advise what this could be?
My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.
>... I can see the Toshiba and the fine Centrino Logo, it starts happening during Windows loading.
> Then I reinstalled it but random characters came on the screen even when installing. Can someone advise what this could be? My thoughts are either bad graphics card or a Ribbon of a cable LCD screen mobo.
For me it also looks like a GPU malfunction... what you is to connect the external monitor to the laptop. If the same strange signs, characters will be visible on the second screen while the GPU is defective...
Well, it would be the worst case, because the whole motherboard must be replaced in case of malfunction of a GPU chip...
Tags: Toshiba
Similar Questions
-
I want to print the data on the screen, even when the print command is not available
When I active Meadia Player I'd like to be able to print a list of the songs in the library, Playlist, etc.
Hi Whitepolarbear70,
Thank you for visiting Microsoft Answers.
I have some steps that may help you.
Method 1
Try to take a screenshot of the library. To do this, follow these steps:
1 open Windows Media Player.
2. open the library and click on the following combination of keys
-Alt + PrtScreen/SysRq * (PrtScreen/SysRq is usually right next to the F12 key).4: open Paint or Microsoft Word, and then press the following key combination
-Ctrl + V which will stick to the screenshot that you took
3. adjust the size n PRINTMethod 2
You can try export playlist of media information by an application word by following the steps in the link below:
http://www.Microsoft.com/windows/windowsmedia/KnowledgeCenter/HOWTO/mediainfoexp.aspx
We inform you that you will install Media exporter info. This exporter is basically designed for Media Player 9 and would work for Media player 11.
The process is a little different:
Follow this workaround solution to install the exporter of media:
Step 1 - Download and install Media exporter Info
You can try to run the program in compatibility mode for Windows XP.
Make older programs in this version of Windows
http://windowshelp.Microsoft.com/Windows/en-us/help/bf416877-c83f-4476-a3da-8ec98dcf5f101033.mspx
Step 2 - use of the exporter to export of information media
Open Windows Media Player. A small Media exporter Info window must already be open. If not, you can open it manually: on the Tools menu, go to plugins and choose the exporter of News Media. If you do not see the Tools menu initially, just right click somewhere on the blue bar dark near the top of your window of WMP.
Click Properties to select where the file is saved and what application to load it in. Will the file be formatted differently depending on the application you choose, but Excel is the best option if you want to clean it to show only the artist/album names (see below).
Click Export. The file will be exported, but it will contain much more than just artist names and album information.
See the link given below where the user had a similar problem.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Using an IP191 monitor, have random horizontal stripes on the screen - have no problems with other browsers. also no problem with FF on the other PCs on the family.
These "streaks" seem to be the domain of the high frequency analysis; they can be eliminated by scrolling upwards or downwards.
Hello, maybe it's a problem with hardware acceleration - try updating your graphic driver, or in case this does not solve the problem, or there is no new version available at the time, disable hardware acceleration in the firefox menu
> options > advanced > General
. -
Question
I have another type of problem with Firefox
Description
When I use Firefox and Earthlink webmail, I get messages that look ok on the screen but when I print them, crazy characters are displayed on the printed page rather than the text that is on the screen. I tried to empty the memory cache, cookies, and temporary files and files in the temporary folder on my computer of compensation by using the "start > run > %temp% ' method. No fix has helped the problem.
Troubleshooting information
IE Tab 1.5.20090925, Java Quick Starter 1.0, Microsoft.NET Framework Assistant 1.1
Version of Firefox
3.5.2
Operating system
Windows XP
User Agent
Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.1.2) Gecko/20090729 Firefox/3.5.2 (.NET CLR 3.5.30729)
Plugins installed
- -IE Tab plugin for Mozilla/Firefox
- The QuickTime Plugin allows you to display a wide variety of multimedia content in Web pages. For more information, see the Web of QuickTime site.
- Deploy Script NPRuntime plugin Library for Java (TM)
- Adobe PDF plugin for Firefox and Netscape "9.3.2.
- Default plugin
- Shockwave Flash 10.0 r45
- 3.0.50106.0
- Next-generation Java plug-in 1.6.0_20 for Mozilla browsers
- Java (TM) Platform SE binary
- Npdsplay dll
- DRM Netscape Object network
- DRM Netscape Plugin store
There is a Bug in Firefox printing which can cause "blurred" impression with some fonts on some printers. Try to use the file > print preview and look at the policies; If it looks good, try to print from the preview window before printing.
-
Restart computer, windows xp screen came then the screen turned white
Restart computer, windows xp screen came then the screen turned white
Hello
1. have you made changes on the computer recently?
2. do you get an error at startup of the computer?Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.
a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222b. you need to perform a clean boot to find the program that is causing and then disable or remove.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353/en-us
Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.I hope this helps.
-
How to disable the screen saver when you watch videos in full screen in firefox?
This only happens with Firefox, other browsers videos play normally and without interruption. I want to keep my window screen saver by default but not when watching full-screen mode.
The Flash Player plugin must normally block the system to go to sleep, reduce the brightness of the display or go to the screen saver when you are using full-screen. It is strange that you have this problem with Flash.
There are workaround solutions such as the use of an add-on or an external program that simulates the movement of your mouse, but those who really shouldn't be necessary.
VLC, I don't know.
Furthermore, you closed and restarted Windows because this problem first occurred? Just in case where some component shared Windows crashed.
-
How to stop messages that appear on the screen locked when they arrive?
How to stop messages that appear on the screen locked when they arrive?
Settings > Notifications > Messages > turn off display on the lock screen. -AJ
-
the iPad beeps and the screen blinks when it is plugged
DIIAP keeps a sound signal and the screen flashes when I plug
Hello
Need more information plug in what sector / pc?
See you soon
Brian
-
My problem is? How can I stop my computer to go to the screen saver when I for example runs a scan of the computer, sometimes my scan takes a long time to finish? Example I have Microsoft Security Essentials set allow to run daily on 1200 AM and until he finishes my computer goes to screen saver Mode. and when I click on my mouse, I must sign completely new in my computer > how to stop this from happening, I want to keep my Security Scan open until there finishes?
All the solutions for this?
Original title: Windows Vista systems
Hello
This can help you:
"Enable or disable the screen saver.
http://Windows.Microsoft.com/en-us/Windows/turn-screen-saver-on-off#1TC=Windows-Vista
And this is how do to change the time to wait before the screensaver comes on (article 8) and how to disable the password to logon to him (art. 9):
http://www.Vistax64.com/tutorials/85539-screen-saver.html
"How to disable or enable Protection by password on Wake Up in Vista"
http://www.Vistax64.com/tutorials/102686-password-protection-wakeup.html
See you soon.
-
I use photoshop elements 12 on Macbook air and the screen freezes when I try to use the tools. Then I have to force quit if I lose my job. someone knows how to fix this?
What version of Mac OS X are you using? If the Yosemite, you will need to upgrade to 10.10.1 or higher version.
In any case, start by going in the editor preferences > general, click this button and the restart of the Editor:
-
Screen saver goes my screen even when I use it.
Hi, I have an iMac (late 2015) and the screen to go to the screensaver, even when I use it. My screensaver is located at 10 minutes before you go to the screen saver mode. It happens as if the meter time don't know what I'm doing. It happens more frequently when I change from one application to another. Any ideas why it does this? Thank you.
Is it possible that you have active corners enabled and you moved the cursor in the corner and trigger the screensaver?
-
How can I do each new tab go to the homepage even when I open it?
How can I do each new tab go to the homepage even when I open it? I want that every new tab automatically go to my iGoogle page.
-
I let the Setup program to remove the previous version when installing CC2015 AE and now also wish to have CC2014 installed.
Thanks in advance,
James Edmunds
When you open the Panel creative cloud, on the section "Find additional Apps", click on "All Apps" (right side) and select "Previous Versions".
-
I can't update the cloud even when the firewall is disabled
I can't update the cloud even when the firewall is disabled
Please read https://forums.adobe.com/thread/1499014
-try some steps such as changing browsers and disable your firewall
-also clear the cache of your browser if you start with a fresh browser
http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.
http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html
or
A chat session where an agent can remotely look inside your computer can help
Cloud creative support chat (all creative cloud customer service problems)
-
computer "bug" after "acceptor of the license agreement" when installing Elements 6, IMAC.
Are Harley94140 you face to difficulties to accept the license agreement? What version of Mac OS are you using on your iMac?
Maybe you are looking for
-
Hello, I get an urgent message to communicate a number of phone about my safari browser. Is it a scam? What is the official support of Safari Apple #? Thanks for your help?
-
Satellite C855 - 12K - BIOS password incorrect supervisor
Hello I own a Toshiba Satellite C855 - 12K and there is a problem with the BIOS supervisor password. Once I put the password, I was unable to access BIOS because it says that the password is incorrect.I am positively sure that the password im putting
-
How will I know if a processor cpu is compatible with my laptop?
I have a 2000-2a22NR laptop and I want to upgrade my cpu. Right now it has a processor 1.4 GHz AMD Dual-Core Processor E1-1200. I want to put one that has at least 2.6 GHz or more, but I can't seem to find out if I can still or witch ones will work.
-
Return additional ups cannot find my external hard drive.
Windows back Ups to run without problem. I put them to run every week and save them to an external hard drive. In recent times the first (full) backup works but additional back weekly, ups can't find my external hard drive even if the settings have n
-
original title: reinstall the Prefetch folder Apparently I uninstalled the "Prefetch file" on my Vista desktop (recommended when running of TuneUp Utilities 2011). How & where should I go to get & install this file? Thank you.