Satellite M300 - compatibility with Windows 8

Similar Questions

• Satellite L500 - compatibility with Windows 7 with Nero

  I recently bought a Satellite L500.
  I wanted Nero on this if it was part of the appeal of the Toshiba.

  Now, I find that the version of Nero installed on the laptop
  is not compatible with Windows 7.
  I am sure that Toshiba should be disappointed with this parasite, and it was not their intention.

  I would be grateful if someone could suggest a solution to this problem outside of having bought an upgrade because it adds significantly to the final cost of the device.

  Hello

  What version of Nero are you trying to install?

  I guess that some versions are not compatible, so you should consult the homepage of Nero to the latest version. All current versions are compatible with your laptop.
  http://www.Nero.com

  By the way: for 3 months now I m using CD Burner XP. He the freeware tool and smaller than Nero. I love it, it s my favorite. :)

• Satellite L300 freezes with Windows Vista

  I use the Satellite L300 laptop with Windows Vista.
  Once the connection is freezing, so I used to do Toshiba HDD recovery and formatted and installed with its recovery tools.

  Now its connect with normal mode.
  The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Again, I have to forcely, I need to start with safe mode and normal mode then again once I get the same problem.

  Can someone tell me the solution?

  > The problem is that if I use multitask or open a window or whatever it is the laptop is hanging (freeze).
  Maybe some of your applications cause this problem

  I think you should check what software could cause what I mean it of not impossible that a 3rd party applications that runs in the background would be the cause of your troubles

  Of course, it could also be related to a hardware malfunction. It looks a bit like a RAM problem, but just a personal suggestion.

• Satellite L40 - F14 with Windows XP - seeing WiFi is disabled

  Hello!

  I have satellite L40 - F14 with Windows XP Home SP2 - and everything works fine.
  But there is a little problem with indicator LED WiFi - WiFi works normally.
  connection with router and... This LED turns OFF. It is not big problem,
  but I like, if everything works well :)

  Now I have the latest version of the driver installed (from 29.11.2007)---> http://support.toshiba-tro.de/tedd-files2/0/drvpack-en-20071119132412.zip.

  Can you give me link to correct functioning driver WiFi for Satellite L40 - F14 or answer where is the problem?

  Help me please :)

  st_man

  *_@st_man1_*
  Have you checked if the WLan switch on the side of the laptop is on? This switch activates and deactivates the WLan led. If this is not enough, I guess that there is a hardware problem. Perhaps some loose contacts, for example.
  This can be corrected with any software update, I think that the technician should take a look in the notebook and should check this

  _*@chris4o*_
  First of all it s very strange that your laptop has not delivered with any Windows operating system! Each new Toshiba notebook was shipped with the Windows operating system and the image of Toshiba should be already preinstalled.
  In addition, you should find the Toshiba Recovery CD in the package. This CD contains all the drivers Toshiba, tools, Windows OS and additional software!

  With regard to the pixel dead;
  Usually the internal laptop display can be replaced if a large amount of dead pixels would be displayed on the screen. There is an exactly information about replacing the screen.

  Please check this:
  http://support.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm

  In any case, I recommend you really clarify this two issues from your laptop dealer! The laptop must have the OS!

• "the software you are installing has been Windows logo testing to verify its compatibility with Windows XP."

  so I try to install the new itunes 10 on windows xp and I get this error, "the software you are installing has not passed Windows logo testing to verify its compatibility with Windows XP." "Continue your installation of the software may impair or destabilize the right operating system, either immediately or in the future." Microsoft strongly recommends that you stop this installation vender now and contact software for software that has passed Windows Logo test. "then why I get this error? and what should I do so that he can stop? I want to say I've never had this happens in their first versions... more it says its compatible with xp. so, once again, microsoft... why I get this error?

  Hey, Yes, I find the problem. do not install the update from the apple software. installation of apple.com it won't give you the error when downloading it on their actual location.

• Apple Mobile Device USB Driver has not passed Logo testing for compatibility with Windows XP, I ran the suggestion to "fix" 925196 that it still does not work. What can I do else?

  Bought the iPhone 3 g (not 4) trying to run the material but get the following error: Apple Mobile Device USB Driver no has not passed Windows Logo testing to verify compatibility with Windows XP continues the installation of this software may impair or destabilize the functioning of your system.

  Windows XP Service Pack 3 is running.

  I ran the 'Fix - It' 925196 solution, but the problem could not be solved. What is a malware problem?

  Hi deanie3,

  We will check if the following is useful.

  Method 1: Run the next Fixit and check the issue.

  Hardware devices do not work or are not detected in Windows

  Method 2: Follow the steps in the below article mentioned to see if it helps.

  You cannot install some programs or updates

• I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit). Unable to get a backup to a flash drive. Error: 0 x 81000029

  Original title: I have a laptop Toshiba Satellite L305-S5894 with Windows Vista Home Premium installed (32 bit).  Unable to get a backup to a flash drive.

  After back back, very many updates of windows, my computer is full of problems and it is not representative of the restore points far enough back to correct.  I want really to save my data and programs for flash drive (s) and then go for a full recovery of the system (return to factory).  When you try to do the backup on a 4 GB USB key I get an error including 0 x 81000029.  I have seen posted answers to this.  Everything is included to aid Vista disk from the window which was not included when I bought my computer. Any help would be appreciated.

  Hello

  The following article should be useful. To use system recovery options, you have Vista installation disc. OEM (Original Equipment Manufacturer) repeatedly will install on the computer Windows recovery environment. To cross check if it is installed, try the following steps.

  1 start the computer and press the F8 key continuously to get advanced boot menu options.
  2. on the menu advanced startup options, check if the Startup Repair tool is in the list.
  3. If so, select it and press ENTER.
  4. If not, then you should organize a Vista installation disc.

  You may receive error messages when you try to perform a backup operation on a Windows Vista-based computer
  http://support.Microsoft.com/kb/950167

• HP pavilion dv6-3280 ca: compatibility with Windows 10

  Hello

  Just upgraded to Windows 10.

  Someone was able to install the drivers for "AMD Mobility HD 5000 Series"

  and "ATI Mobility HD 4200 Series"

  I get "Windows has stopped this device because it has reported problems. (Code 43) "for the AMD

  and "no driver installed" for the ATI card

  Thank you

  RJLX

  Hey @rjlx ,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion Notebook dv6-3280 ca and problems with compatibility with Windows 10.

  If your computer is experiencing problems find and install updates of the operating system, try to use the Windows Update Troubleshooter to fix the problem.

  If this is not enough, you need to restore the laptop to a previous version of Windows.

  Thank you.

• WD5000H1U car has become a legacy product and we have no plans to create a firmware for compatibility with Windows 7. __

  I got this response from Western Digital on my old hard drive My Book Essential Extermal.

  Thank you for your response.

  Really, I apologize for the inconvenience that you are experiencing currently. Unfortunately, this disc became a product and we have no plans to create a firmware for compatibility with Windows 7.

  I hope that we have met your expectations today and that you are satisfied with our service. If you have any other questions, just reply to this email and we will be happy to help you further.

  Sincerely,
  Nestor V.
  Western Digital Service and support

  If you encounter any problems with your external hard drive, this could be the problem.

  Well, don't know how it happened, but it works.

  Last night I went on the Web site of WD and downloaded

  1 EssentialEliteFirmwareUpdaterv1.032_1.0.7.4
  2 WDSmartWare_Software_Updater_For_Windows_1_0_12

  After I did it, I unplugged all of my other drives and I tried everything again with the missing disk, but it still does not.

  This morning, I reconnected all of my readers, and he started to read the missing disk.

  The version of the driver file is now
  6.1.7600.16385(win7_rtm090713-1255)

  I'm not sure what did the trick, but maybe this will help someone out there.

  Good luck!

• Reference Dell photo printer 720 compatibility with Windows 8

  Is Dell photo printer 720 compatibility with Windows 8. ?

  You would be better to replace this printer.  It was a free add to dell computers sold in 2004 that cost $25 buy then. It's time to buy a new one.

  It is not compatible with windows 8 - see THIS

• CS6 Compatibility with Windows 10

  I bought the whole adobe CS6 suite and I really need to update my computer, but I fear that my adobe software will stop working. I saw where cloud applications are compatible, but I didn't know where this question is still answered. Can someone please answer this question as Adobe support is unable to connect with.

  TIA

  Cloud & Win10 https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  -In addition, only CURRENT products will be tested and updated for compatibility with Windows 10

  -so if you have an older, program update you to Windows 10 at YOUR risk of problems

  An idea that MAY work to install or run some programs in Windows 10 old... works for some, not for others

  -http://www.tenforums.com/tutorials/15523-compatibility-mode-settings-apps-change-windows-1 0 - a.html

  - or to run it as Administrator http://forums.adobe.com/thread/969395 to assign permissions FULL said... yet, but it is sometimes necessary for Adobe programs

• Adobe Acrobat 5.0 compatibility with Windows 7

  Adobe 5.0 compatibility with Windows 7

  It is not compatible and will not work.

  Mylenium

• Is Satellite A105 - compatible with Windows 7?

  Hi all

  I want to install Windows 7 on my Satellite A105-S4344. I run Windows 7 compatibility test and it said the laptop is compatible, but on the Toshiba site it says my laptop does not support Windows 7.

  Who to believe?

  Hi ACE1146,

  What Toshiba Web site you are looking for?

  I checked the US page where is your A105-S4344 and it seems to be compatible with Windows 7 because you can download Toshiba Software Installer for Windows 7. After performing a new installation, the Toshiba Software Installer will download and install all the software Toshiba provided.

  In addition, you can find a lot of interesting forms of support they are interesting for you:
  http://www.CSD.Toshiba.com

• Satellite U500 - problem with Windows 7 and HSDPA USB modem

  Hello
  My wife recently purchased a Toshiba Satellite U500, that came pre-installed with Windows 7 64-bit.

  A few days later, I bought a modem high-speed HSDPA USB by Alcatel. The problem started immediately that we plugged the modem, that drivers would not install.
  Then I went to the Web of Alcatel site and found the drivers for windows 7 for her. But then we hit another road block since now the drivers are installed and it does not detect the modem, but whenever we try to connect to the internet, screen flickers at the connection for a moment and then disconnects again.

  I found cela a lil strange so I tried to connect using my own pc which has a 32-bit Windows 7 and it works fine there.
  It is the same for a machine that still had Windows XP. Makes me think its something to do with 64-bit Windows 7 itself. Could someone help please?

  Thank you and best regards.

  I don't think that someone here can help you with this problem. You will be very happy if someone on this forum has exactly the same model of laptop including same USB modem.

  In my opinion, you have two options: either you can clarify this point with the support of Alcatel (they have enough experience with own products) or with people from the nearest Toshiba service provider service.

  Have you tried to test the features with the Win7 32-bit version?

• Is it possible to use the Satellite P200D - 11L with Windows XP

  I want to buy this model from Toshiba (P200D - 11L). Is it possible to run it with Windows XP? Because I'm not interested in Windows Vista now... thx

  Of course, it is possible to use the XP on this laptop.
  But the question is; All the XP drivers are available for this series of satellites P?

  I checked the page European driver of Toshiba and, unfortunately, I didn't find the XP drivers for the series Sat P200D currently

  Well, as far as I remember the XOP drivers were unavailable for the A200 series too. But after a few days/weeks Toshiba comes to present all the XP drivers.
  I guess that this series is brand new on the market and it may need to wait a bit until all the XP drivers will be available.

  Please do not get out of patience ;)

  Best regards