Satellite M300 - display driver has stopped and recovered continues to appear

Similar Questions

• Satellite A500 - display driver has stopped and recovered

  Hello!
  I have a portable Satellite A500-1EE causing me trouble lately. Several times a day, the screen goes black and after a few seconds, it retrieves, with the message:
  "Display driver has stopped and recovered. Display NVIDIA Windows Kernel Mode Driver, Version 257.21 driver stopped responding and has successfully recovered."

  Please give me advice on how to solve the problem.

  Thank you
  Roxana

  From time to time it happens on my P500 too but especially if I look at a Web page with flash player but after driver recover everything is OK again.
  To be honest, I don't see it as a major problem.

  Is there a particular situation when it occurs on your A500?

• Display driver has stopped and recovered

  Hi, since a few days I get freezes and blackout and display driver has stopped running and was recovered. It happens when I am on youtube and continues to make, so I just turn off my computer. I had this happen before on my old computer, but that computer is brand new. I've had this for a few months and I have windows 7 64-bit XP.  MSI G41M-P28

  I searched for solutions to the problem and it is said it can be many things: RAM is overheating (but my computer doesn't seem to be hot.) Overclocked? I don't know, or need to update and download new updates for pilots. I had my computer checked and it showed 67% of drivers are ok, and 33 percent are not. But I want a free service and that you must have a subscription and there are fees.
  I'm so confused.  :(  I can't assign to computer and it is very difficult for me to understand. I have files that I don't understand what they're doing, and I need to have surprised location for the files to another drive / location I don't know.
  Please can someone help me and explain the problem and what I can do about it. And please if it can be a very simple and easy way that I can understand step by step :)
  Thanks :)

  Hello

  1. who is the manufacturer of the system?
  2. you did it before the issue of any material changes or software?
  3. What is the exact error message?
  4. When you receive this error message?

  Method 1: Please, try the steps listed in the article mentioned below.
  Windows stops responding and you receive an error "display driver has stopped working normally":
  http://support.Microsoft.com/kb/328071

  Method 2: Boot your system in clean boot mode, and check if you get the same error again.

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353

  Important: After you use the clean boot in order to solve your problem follow the steps in the "How to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 3: If none of these mentioned the working methods, I suggest to uninstall and reinstall the video driver.

  Step 1: To do this, follow these steps.
  a. Click Start, select run, type devmgmt.msc in the run box and press ENTER.
  b. expand the graphics card.
  c. right click on your video card, select uninstall.
  d. restart the computer. Windows should now reinstall the video drivers.

  Step 2: Update the computer with the latest graphic drivers. Log in the Web site of the manufacturer to do so.
  Visit the below mentioned link please.

  How to manage devices in Windows XP:

  http://support.Microsoft.com/kb/283658

• display driver has stopped working and recovered

  In my laptop, I get a message from the display driver has stopped working and my screen goes black and crash suddenly

  Details of my laptop are
  Compaq 620
  Windows 7 ultimate 32 bit
  Intel (r) Core (TM) 2 Duo CPU T6570 2.10 GHz
  Display map Mobile Intel(r) 45 Express Chipset Family (Microsoft Corporation - WDDM 1.1)
  Hitachi HTS545032B9A300 ATA Device driver
  Display Mobile PC screen 1366 * 768

  Help, please

  I would start by removing the current driver and installing the latest driver available.  (yours is 5 years old)
  

  
  

  "It is not a true crash, in the sense that the blue screen was launched only because the combination of material and video driver video was to be insensitive and not because of any exception processing synchronous".

  Since Vista, the components of "Timeout detection and recovery" (TDR) of the subsystem video OS have been able to do some really impressive things to try to find issues that would have led to the earlier OS like XP to crash.

  As a last resort, the TDR subsystem sends a video driver command "Please restart you now!" and wait a few seconds.
  If there is no answer, the BONE concludes that the combo of driver/hardware video has really collapsed in a heap, and it fires at this stop 0 x 116 BSOD.

  If playing with video driver versions did not help, make sure that the box is not overheated.
  Try to remove a side panel and a fan of big sector directly to the motherboard and GPU.
  Run it like that for a few hours or days - long enough to check whether the cooler temperatures make a difference.

  If so, it could be as simple as dust accumulation and inadequate cooling afterwards.

  I download cpu - z and gpu - z (both free) and keep an eye on the video time

  For more information please read this blog http://captaindbg.com/bug-check-0x116-video_tdr_error-troubleshooting-tips/  

  http://msdn.Microsoft.com/en-us/library/Windows/hardware/ff557263%28V=vs.85%29.aspx

• Satellite M50D-A-10W - display driver has stopped working while gaming

  Hey guys I just bought a toshiba Satellite M50D-A-10W and I have a very annoying problem...
  When I play in dota 2 sometimes I get a massage like: "display driver has stopped working" or answer

  I remember exactly, and the freezing of the game and then screen I need leave the game and reconect. If you can help me guys, I'll be very grateful

  Rare Hi

  This message is certainly created by the installed graphic card driver.
  I can't say for sure why this happens, but I recommend you to reinstall the graphics driver.
  In most cases, this should fix problems with gambling.

  Greetings

• Need help, get message display driver has stopped working, but has recovered

  Had no problems until recently, my freezer of mouse and screen, then get message display driver has stopped working, but recovered it gets really bad, please help

  Hello

  1. what operating system do you use?
  2. What is the brand and model of your system?
  3. Once you get this error message?
  4. you did it before the issue of any material changes or software?

  Try the steps outlined in the methods mentioned below and let us know if it helps.
  Note: The following Microsoft Articles are applicable for Windows 7 and Vista.

  Method 1: Boot your system in clean boot mode and temporarily disable your antivirus software. Check if get the same error message or not.

  Step 1: Try now to the KB article to perform the clean boot:
  How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7:
  http://support.Microsoft.com/kb/929135
  Important: After you used the clean boot in order to solve your problem follow step 7 to reset the computer to start as usual.

  Clean boot in XP:

  Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Step 2: Turn off the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks

  Method 3: update the driver for
  

  Updated a hardware driver that is not working properly:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 4: Please visit the manufacturer's website and download the latest driver for your graphics card.

  Method 5: Windows 7 power save settings reduces the voltage to the video card too well when it is inactive for some video cards.

  To resolve this problem, disable the display (Plugged In) turn it off and turn off the display (on battery) power settings by using one of the following methods:

  Use the Group Policy settings:
  To resolve this issue by using Group Policy settings, follow these steps:

  (a) click Start, type gpedit.msc in the search box and press ENTER.

  (b) in the local Group Policy Editor, expand models of administration under Computer Configuration, expand System, expand power management, and then click display and video settings.

  (c) in the dialog box that opens, double click on turn off the display (Plugged In), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  (d) in the dialog box that opens, double click on turn off the display (on drums), click active, type 0 in the box to turn the display Off (seconds), and then click OK.

  Use the powercfg command:
  To resolve this issue by using the powercfg command, follow these steps:

  (a) click Start, type command prompt in the search box, and then click command prompt in the list of results.

  (b) at the command prompt, type the following commands:
  powercfg - X-monitor-timeout-ac 0
  powercfg - X-monitor-timeout-dc 0

  Get back to us if the problem persists.

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Display driver has stopped working during the game the Sims 3

  Original title: video card? With the Sims 3 ~.

  I bought the Sims 3 and downloaded yesterday. I have played since then, but then the game would freeze and tell me that this ialmrnt5 of display driver has stopped working. So I tried to fix it, and it did not work. Now, he tells me there is something wrong with my graphics card and Sims does not work yet. I keep going from one link to another tells me to download this and that and I don't know what I have to do. I want to be able to play my game, because it's expensive and I bought it only yesterday. Help, please. PLEASE, I BEG YOU.

  -Poprocks26

  I thought about it, are not even worry about this.

  I just needed an update from Intel. It works perfectly now. :]

• error msg, "ialmrnt5 display driver has stopped working normally."

  Hello!!!

  I use an old PC configuration, windows xp Intel 845 G, for several days that I get an error msg whenever I try to run mp4, .mvi and many other video files saying: "ialmrnt5 display driver has stopped working normally. Save your work and restart the system. the size of my screen becomes huge and icons on my desktop... expand please suggest a way out for remedy.
  My email ID.
  E-mail address is removed from the privacy *.

  Hi Moiz,

  Thanks for posting your question in the Microsoft Community.

  This problem can be caused if the display drivers for your computer is damaged.

  1. What is the brand and model of the computer?

  2. have you made any recent hardware or exchange of software on your computer before the show?

  Follow the steps in the link.

  Windows stops responding and you receive an error "display driver has stopped working normally":

  http://support.Microsoft.com/kb/328071#appliesTo

  I also suggest you to update the display drivers for your computer from the links.

  https://Downloadcenter.Intel.com/default.aspx?lang=eng

  http://www.Intel.com/design/chipsets/datashts/290746.htm

  If you need further assistance on this topic, let know us and we will be happy to help you.

• "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150

  "the igxprd32 display driver has stopped working normally please restart your computer" on intel gma 3150, especially when I run 3d games or install Skype 5 and start on this video than the above message appears please advise solution and oblidge. Thank you

  First of all, you're not telling the forum what version of Windows, edition and service pack level your system is running.  Please do.

  Secondly, there is no describe your system.  Tell us who makes your system and its model, if a packaged system.  If not packed, please tell us who manufactured your motherboard and model.  If your video card is another box and not originally shipped with the system, please tell us the manufacturer and model of the adapter.

  Finally and most importantly, please read 555375 Microsoft Knowledge base article, how to ask a question.

  Now, in general, unless your system has a card mother Intel®, you do not want to download an updated directly from Intel® driver.  If there is a system, you will want to download an update of the driver support from the manufacturer of your system model site.  If not packed, see web site for support of the manufacturer of the motherboard for your updated driver model.  If this isn't the case, a card mother Intel®, the reason for the not to load the Intel® GMA 3150 drivers from the web site Intel® is that there may be unhandled in the Inte® base drivers implementation changes.  Nor should download the drivers through Windows Update, except as a last resort.  If Windows Update contains an updated driver, check you motherboard of the system/website of the manufacturer for updates.  Be aware that some manufacturers/motherboard of the system (e.g. Dell) don't feel any economic incentive to keep the drivers/firmware to update if a motherboard system was abandoned.

  No member of this forum is omniscient!  Provide complete information leads directly to all the answers!

• Display driver has stopped working

  My computers display driver has stopped working, what I have to. I already tried intstalling more and liked and same fixed, but still nothing. what I have to to?

  Hello

  • What is the brand and model of your graphics card?

  Try to uninstall then reinstall the graphics card from Device Manager:

  Steps to uninstall the device:

  i. click on start, type devmgmt.msc and then on enter.

  II. Locate the display adapter device

  III. right click on the device and select Uninstall

  IV. restart the computer and changes occur.

  I would also ask you to contact the manufacturer for updated drivers.

• I constantly get a message error display driver has stopped working and has recovered.

  I have my getting an error message display driver atikmdag stopped responding and has successfully recovered.  Just typing this screen deleted three times!  What should I do?  I have an AMD processor and Windows Vista Home.

  Hello

  See this article which has a Fix - it:

  "Display driver stopped responding and has recovered" error in Windows 7 or Windows Vista
  http://support.Microsoft.com/kb/2665946

  Also check with Support ATI, their drivers and documentation online and ask in their forums
  on known problems. You should perhaps update the video driver or re - install the same as
  If it is more recent. It is sometimes necessary to return to an older stable version.

  Drivers and Support ATI
  http://support.AMD.com/us/pages/AMDSupportHub.aspx

  ATI Catalyst drivers - use the Catalyst drivers
  http://game.AMD.com/us-en/drivers_catalyst.aspx

  AMD/ATI Forums
  http://forums.AMD.com/game/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Several BSOD and display driver has stopped/recovered

  This is a new generation of about two months ago. First record:

  -Biostar Mobo TZ77B
  -In the course of running a Geforce 560 with 301,42 drivers
  -16 GB Corsair XMS3 1600 DDR RAM (two sets of 2x4g, second series was RMA had and has recently received, problems started after the installation of the new together)
  -550w Rosewill PSU hive

  Initially got a set of bad RAM, RAM had. During the removal of the bad RAM my 560 died suddenly and was RMA would be as well. Replacement 9800GTX + has been installed as I waited for the 560 to be returned, which unfortunately did not solve the problem. As soon as receives a new set of RAM from Corsair and installation I started getting errors display driver stopped and recovered while gaming, artifacts and an occasional BSOD with various codes (I saw 0000003B pop up the most.) while playing City of Heroes of MMO, surfing the Web and watching videos and all playing various other games. The BSOD seems to also occur in pairs, usually one plant to me during a game, and then another a few minutes after the restart.

  I run stress tests using Prime 95 my last system, as well as of Furmark and makes both temperature resistance tests, while controlling also my GPU under load. So far the CPU and GPU temperatures exceed not anywhere in what seems to be a dangerous area. I also ran a memtest86 overnight on the RAM bars for 9 hours, 18 assists, without error. Unfortunately, only, I could get memtest 3.5 version to work, the 4.0 would immediately restart (not sure what the cause of this what)

  Yes small lots is the way the safest are the Windows updates. I start with sp1
  first to avoid installing updates can be in sp1.

  It is the misfortune of having to RMA a card more than once. My Gigabyte GTX560ti was spotless and quiet on the first day (a little over a year now).
  At least, you run stable now and know that the other stuff is good.

• G7 2017 Pavilion: display driver has stopped working and has recovered

  I received this message at least twice this month. In addition, the laptop freezes several times a day. Not sure if the two problems are related. Thanks for any help you provide. Ana

  Hello @Anne47,

  Welcome to the Forums of HP Support!

  I read your post on the issue of the display and wanted to help you!

  Looks like there is a problem with the graphics driver.  First of all, try to review the following document and let me know how it goes:

  HP PC - error: display driver stopped responding and has recovered (Windows 10, 8, 7)

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Display driver has stopped working and has recovered

  This is my first post, so please bear with me. Also although I use pc a lot, I'm not technical interest. I have a laptop Compaq presario CQ61 64-bit Windows 7.  2 days ago the screen went suddenly "speckly" flickered then briefly became black. On forward "normal service resumed" but a message "display driver stopped working and got ' came then disappeared. I was watching BBCiplayer in time if this is useful. Since then, the problem has re occurred several times and I had to reboot a couple of times. I don't do any game at all, just browse some sites regularly then use Skype for an hour a day.  I thought everything was good today as the portable performed normally for a long time, then did it again! Can anyone help (in terms of simple fool) Please? Thank you very much

  An update conflict is possble.

  It is likely, too, that just reinstall the driver - if necessary update or just reinstall the current version - can solve this problem, if the software is at the origin of the problem.  Sometimes the drivers are dynamited by the updates and can be cured by be reinstalled after the fact.

  Good luck!  Post back with your results, if you like, and let us know how you fare.