Satellite M300: speech recognition only works with external usb hub

Similar Questions

• Satellite A210 - 10 c only works with the 800 Mhz instead of 1.6 Ghz

  Hello

  I have a very big problem. One day, I look in Vista on my resource monitor and see that the max freuquence is only 50%.

  So first of all I think that is no problem because the assets 'energy savings' energy recorded.
  I have a Satellite A210 - 10 c portable.

  So I switch to maximum power and perform a test of prime95. But hell, the max freuquence has not changed. I also installed everest and cpu z, but all programs show the same to me:

  My laptop only works with the 800 Mhz instead of 1.6 Ghz!

  I'm looking for drivers for the AMD processor, but you need not for Vista. Update all the drivers of Toshiba and Programms and BIOS (in fact, it is the 1.9).

  Nothing helps.

  As a last test, I reinstalled Vista, but also did not help.

  And now I'm at a loss what to do.

  I hope someone can help me.

  Good bye...

  Have you installed the Vista using the recovery CD or the original CD of Microsoft Vista?

  I ask because the restore CD contains all drivers for Toshiba and yellow exclamation marks should not be apparently in Device Manager.

  If you used the original CD of Vista I think that you have not installed the Package of Intel Robson.

  I found the package of Robson on the Toshiba driver-> Satellite P200 area page.

  Maybe you should check this.

  Your comments would be appreciated

• How can I get speech recognition to work with text to train my voice, the way which the tutorial done?

  The tutorial of speech recognition to train my voice is not large enough for the engine get good recognition of my voice. I want to put in place a couple random pages of text (like a novel, etc.), and that I dictate the words in the program he would coordinate the words I read with the text I was reading from and type what I read to show how he got trained.

  Here is the translation of the above using the voice recognition program.

  If this tutorial from speech recognition to train my voice is not a large enough for the motor get a good and recognition of my voice.  I want to put in place a couple random pages of text (like a novel) which does not run and I dictate the words in the program that he would coordinate the words I read the text I was reading types of what I read, that the show has done which forms

  The foregoing would take a lot of editing, which I already did a large part of. Also if you change the type of microphone that you are using, you could start any training.

  I'd be cool if (with headphones), you might get feedback that the program thought you said so that you wouldn't be constantly replay to see if it came out correctly.

  Hello

  What version of the windows operating system is installed in the computer?

  Method 1:

  I suggest you to see the link (it is necessary for windows 7)

  Troubleshoot speech recognition

  http://Windows.Microsoft.com/en-NZ/Windows-Vista/troubleshoot-speech-recognition-problems

  Method 2:

  If you are using windows 7, I also suggest you to see the links and check.

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows7/what-can-I-do-with-speech-recognition

  Common commands in speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/common-commands-in-speech-recognition

  Add or edit words in the speech dictionary

  http://Windows.Microsoft.com/en-us/Windows7/add-or-edit-words-in-the-speech-dictionary

  Dictate text using speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/dictate-text-using-speech-recognition

  See also:

  Setting speech options

  http://Windows.Microsoft.com/en-us/Windows7/setting-speech-options

  Set up speech recognition

  http://Windows.Microsoft.com/en-us/Windows7/set-up-speech-recognition

• Satellite M30-801: CPU only works with a 600 MhZ

  Hi people, I have a strange problem since my PC back to toshiba support (lcd problem, on assistance report i red that the pcb has been replaced): my CPU goes up to 600 MhZ. I tried to update the version of the bios from 1.20 to 1.70 successfully and I have restored the default value believing it could be a related problem of bios , but nothing changes.

  The problem is present in a new installation of Windows XP (from recovery CD), so I think I could exclude a software problem.

  Any ideas?

  Thanks in advance
  Roberto

  Hello

  The update of BIOS does ' t solve this problem.
  It seems that the Toshiba service partner forgot to start several compatibility tests. This is necessary after some repair procedures. Without this additional test, the CPU does not work with maximum efficiency. Well, there is nothing to see. You must contact the service again and it should solve this problem.

• Satellite L30-149, only works with external monitor and VGA mode

  Satellite L30-149, Windows XP Home Edition

  Yesterday I did face the following problem:

  I swithched on my laptop but I have nothing on the screen. I tried to reboot several times, but it did not help. If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  I plugged on the external monitor. With that he gives a little more. The Intel logo with the instruction how to reach configuration etc. Then Windows logo but when it should ask the user, the external monitor going to sleep mode and nothing happens after that.

  And an external monitor, I managed to connect to Windows in safe mode and also in VGA mode. In VGA mode, I tried to change the resolution, after that I got black screen again and I had to start.

  Now I wonder if I could do something (update of drivers, etc.) or should I go to the store where I bought the laptop and ask them to fix it. This look like a problem covered by the warranty?

  --
  Upgrade to this message (what happened after that I wrote the above text).

  I turned on the laptop again. I thing the lightning from the room is now better because I noticed that the laptop seems to work (almost) correctly. Windows starts normally, I can faintly see the desktop. This seems to be a problem in the background ligthning. FnF7 does not change the situation.

  Post edited by: mpetas

  > If I look very carefully, I see the logo of Intel (black text on white on the screen) but nothing else. The logo shows very low.

  This sentence is very interesting.
  Sounds like a question of FL-ups!

  It is a small part behind the screen and control the backlight of the screens.
  Usually, this part is not very expensive and the replacement is not complicated to a technician for laptop.

  If your warranty is valid, then everything should be done for free.
  Try to contact the ASP in your country and ask for later handling.

  Greetings and good luck

• I use 10 MSOffice and try to get speech recognition to work with MSWORD 10. How this connection or enable the job to type documents with speeches? Thank you. Ken D.

  The speech bar appears and indicates that the program is tuned, however, I can't seem to activate in MS WORD for my documents.

  The speech bar appears and indicates that the program is tuned, however, I can't seem to activate in MS WORD for my documents.

  First do the following:

  1. Click with the right button on the microphone in the WSR speech bar
  2. Click on Options
  3. Make sure there is a check mark beside "Enable dictation everywhere."

• Microphone only works with external headphones... not by laptop

  I'm used to be able to talk directly to the laptop of communication via Skype.  Now, I have to use a headset with microphone so that your caller to hear me... a real pain... What can I do to fix this?  Thank you!

  Hi JennaM,
   
  Check sound settings in Skype to use the built-in microphone.
   
  a. open SKYPE--> Tools--> Options--> sound settings.
   
  More information on:
   
  HP laptop built in microphone problems
   
  For further assistance, you can contact Support Skype settings you need to change in the Skype program.

• speech recognition only works in the tutorial, how can I activate this thing?

  The the command links that I click nothing doing, there is no icons in the taskbar. menu start has no effect. None of the menus Troubleshooting provides solutions

  I want to start using. all indications are that the hardware is fully functional. Tutorial works very well.
  Hello
   
  Create a new user account and check if it helps.
  Create a user account:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account
   
  If the problem is resolved in the new user account, this means that the old user profile is damaged.
  Here is the link to repair a damaged user account:http://windows.microsoft.com/en-US/Windows-vista/Fix-a-corrupted-user-profile

• Updated and now the phone won't work online only works with 4G

  Download ios 10 and now my phone does not work online only work with 4G

  Hello thomas.friar,

  Thanks for asking for help with your iPhone to connect to the internet via wi - fi since the upgrade to iOS 10. We don't like to hear about the problems that occur after an upgrade. Here's what I recommend.

  The first thing we want to make sure that all of your data on the Mac and the iPhone is safe. For iPhone, you can perform a backup in iCloud or iTunes using this article: backing up your iPhone, iPad, and iPod touch.

  Then, follow the steps in this link: If your iPhone, iPad or iPod touch connects to a Wi-Fi network

  Thanks again and have a great rest of your day.

• We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  We have site and only works with Firefox 3.0 Setup. so, can we have this version Offline Installer?

  Why is your site, not be able to be consulted in current Firefox?

  Firefox 3.0 is now rather old and vulnerable.

  If you must use a version of Firefox 3.0.x for that one site then try the portable version of Firefox 3.0.12. English is near the bottom of the list.
  http://sourceforge.NET/projects/PortableApps/files/Mozilla Firefox 2% C Portable ed. / Mozilla Firefox Portable edition 3.0.12 %2C.

  ^ copy + paste the url above.

  Installs it portable Firefox is autonomous, that it does not touch your version of Firefox or normal profiles for her.

• My camera Olympus only works with Apple's Quick Time 7. Is it possible to make it work with my operating system from Windows XP?

  My camera Olympus only works with Apple's Quick Time 7.  Is it possible to make it work with my operating system from Windows XP?

  Apple QuickTime 7 works is because. MOV is the Apple
  QuickTime format.

  QuickTime. MOV files can cause problems with Windows Media Player.
  And... If you plan to try editing with Movie Maker... the files should
  be converted to the. WMV format.

  No guarantee, but the following decoder might allow Windows Media
  Reader to read your. MOV files. Only problem is... it is not freeware to retail.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  3ivx MPEG-4 5.0.4 decoder
  http://store.3ivx.com/3ivxStore/product_details.php?ID=11

  Convert the. MOV files to the. WMV format may be worth a try:

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup295.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup295.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck

• Error message - it only works with Windows Media Player for Windows XP when trying to convert playlists to Excel.

  Original title: windows media player 11 trouble conversion playlists to Excel after obtaining bonus pack.

  I downloaded the bonus pack, everything works well except the library management wizard. Comes with the message that it only works with Windows Media Player for XP only. I am currently running windows xp edition family and windows media player 11.  Help, please.

  Hello

  You can follow this link & check if the problem persists:

  How to export a playlist in Windows Media Player?

  Hope the helps of information.
  Please post back and we do know.

• SimplePass only works with IE and not other browsers

  SimplePass v5.20.205a should work with other browsers like Chrome or Firefox?

  On my dv7-4295us w / Win7 - 64 bit, SimplePass only works with IE8/9. Use IE, suddenly me in connects to the listed sites. With Chrome or Firefox, suddenly won't open the password manager. After scrolling to and by selecting the entry with the correct connection info, an instance of IE opens and connects me.

  If Firefox is set as the default browser, one touch opens the password manager. You select the Web site, a warning message (Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program.)

  If Chrome is the browser default, one touch opens the password manager. The selection of the correct entry, results in a new instance of Chrome to open to my home page.

  BTW - the link for help does not (never) bar of tasks or SimplePass inside.

  Cognizer,

  Welcome to the Forum!

  Firefox will work with your version of SimplePass, called Digital Persona.

  The limitation is that you must use a PREVIOUS Firefox version: ~ 3.6 28

  Download of Firefox 3.6.x

  If you're ready to do this (use the old version), then you can use all the sites to your connections and also use the HP connection to access your account on your computer when it starts.  This old version of Firefox also works very well with IE8/9.

  You can update Firefox to the bosom of the version 3.6.x, when they ask... just don't get excited and upgrade to the latest Firefox or Simplepass balk.  Tip: You can keep a copy of your download 3.6.x autour just in case you lose the installation or something else happens and you need to reinstall Firefox later.

  IE8 is quite Rocky.  If you have no choice, be it, immediately update IE9.

  I don't know about Chrome.  Couldn't get anything to work with it.

  ----------------------------------------------------------------------------------------------------------------------------------------------------

  I hope this helps!

  We work hard to help!

  Whenever you see a useful Post - click on the Star Bravo on the left as a thank you!

  Doesn't have this Post solved your problem?  Mark "accept as Solution!

  Note: You can find the box "Accept as Solution" on threads started by you.

  2012 the year of the Dragon!

  Dragon tips:

  SimplePass flavoers Digital Persona and HP SimplePass 2011 / 2012 are MATERIAL dependent.  This means that your computer hardware dictates what kind of software SimplePass, you should run on your computer.  If you run Digital Persona SimplePass style, you must continue to run such - at least for now.  The software code is different, and are the two types are not interchangeable.

• BlackBerry Z10 headphone only works with the left ear

  My headphones (beats studios) only works with the left ear when connected. The helmet has never had a problem on my old iPhone 4 and currently with my rMBP so I know that's not the headphones. Any suggestions?

  There seems to be a problem with the jacket of the head. They are defective for a few pieces and the jacket cannot recognize the HP in the same case, what makes the phone to give no sounds on the notification.

  Try to use different headphones. If the problem persists try replacing the model.

• I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  I have recently upgraded my MacBook Pro and Adobe creative suite 6.0 on the former. It of maybe a stupid question, but how do I get the software on my new MacBook Pro? My understanding is that my serial number only works with one computer at a time?

  Hello

  You can install a copy of the software on the second machine it's just you are authorized to use on one machine at a time.

  You can check: how many computers can you install or run Adobe software on? ProDesignTools

  End user FAQ license contracts

  Please visit the given link to download CS6: applications download Creative Suite 6

  Concerning

  Bianka Attre