Satellite M305D-S4830: error recovery - Partition creation failed

Similar Questions

• Toshiba Recovery - Partition creation failed on Satelite P200

  I have a * Toshiba Satelite P200 *.

  Norton has expired recently, within hours of the expiry I seemed to have a Trojan horse. I think it is W32/IRCbot.worm (his supposition a little!) because it seems to be popping up again.
  It also caused my computer to restart, as in the description of viruses.

  I had tried recovery and recovery disks but received this error initializing the partition has been:
  * ERROR: 08-0E89-000 *.
  Failed to create the partition.

  I then tried a full erase with the TOSHIBA recovery disks, it took hours 18 or more, but ended up with the same error message as above.

  I do not have data importiant (transferred all externally) and I'd like to start over again. I'd love you long if all-in-one could suggest anything.

  To make clean OS install with media recovery is not a problem, and you can't do anything wrong. I recommend you do the little test and install the operating system without creating any partition. Start the recovery procedure, choose the language and simply continue without using the SETUP button.

  Please can report you if the recovery procedure completes successfully?

  To be honest, if you can't install the OS via recovery DVD disc there is not much to do and you need to clarify this with the service provider authorized in your country. Either they will test with other discs or experiment with new HARD drive. I don't see any other solution here.

• Satellite M305D-S4830 - the open fail - webcam & microphone Webcam driver does not work

  I have a Satellite M305d-s4830.
  My PC operating system is Vista 64 bit.

  Cam and mic worked very well until one day the software assistant camera began to show a messagebox saying that: "Webcam driver open fail. Please restart the computer or the camera. »

  Since then, I tried everything that comes to my mind, but I think that the cam or the microphone appear in Device Manager. I also have the for Toshiba recovery disc.

  What am I supposed to do?

  Thanks in advance

  Hello

  > Since then, I tried everything that comes to my mind, but I think that the cam or the microphone appear in Device Manager
  Hmm, do you mean that the cam is not listed in Device Manager
  Or an unknown device, or near a yellow exclamation?

  Sounds like delivers material but try to recover the laptop using the recovery disk.
  If this will not help, it means that there must be something wrong with the cam

  I read on the net that some people have a similar problem.
  The webcam worked when opened the lid of the laptop only to halfway.
  But webcam disappeared when the lid has been moved upwards.
  Maybe there is a loose contact between the cable and the cam
  In this case the ASP technician must check the laptop.

• Re: Satellite M305D-S4830 Volume dial strange behavior

  Hello, I have a strange problem with my volume on the Satellite M305D-S4830 control button. I don't know if this error began to occur, but now my volume control button produces the letters B and C when I ride it's right/left. Here, I'll roll c/cw-cw now:

  ccccccccccccbccccccccccccccccccccbbccccc

  It produces the BS less often than c as you can see. In addition, he performs the adjustment bar volume but erratic: when I roll it clockwise it decreases the volume and then greatly increases the volume immediately. Turning clockwise increases the volume strongly, and sometimes it decreases the volume a bit.

  I have the latest drivers for my Satellite and have not modified the operating system or the Services (such as HID Input service) somehow. I tried to use a previous version of the driver for the sound, but nothing changed. Thanks for your time.

  Hello

  Someone had a similar problem. I read about it here in one of the wires (if you want to use the search option).
  The point is that the technician cleaned wheel volume (contacts, etc...) and this has solved this problem.
  I put t know if it's the same reason in your case but it s worth a try

  Notes; Don t disassemble the laptop computer or similar! This can be done ONLY by ASP because of some validity of damage and guarantee of the equipment!

  PS: of course the update of the BIOS is also advised.

• Black screen when I restart the Satellite M305D-S4830

  Hello

  I bought my Toshiba Satellite M305D-S4830 laptop a few months ago and I had a little problem with it.
  Whenever I choose to "Restart" of the computer, it normally stops and begins to restart, but the screen stays black and the DVD player seems to loop start (like if it tries to start, but it may not).

  It does this, infinitely and finally, I have to hold the power button to turn off and then on again.
  There, it starts normally.

  In addition, the computer stops perfectly and boots perfectly when he was the previous order.

  In any case, I can fix the function 'reboot '?

  Hmm that's strange

  Have you tried to recover the operating system and to check if the problem still persists after using the recovery disk?
  Select this check box.

  In addition, you should check your BIOS. Maybe a newer version is available.
  If so, then update!

• Where to find Win XP 64 bit for the Satellite M305D-S4830 energy management/conservation

  I was able to completely load Windows XP 64-bit on my Satellite M305D-S4830 with all the drivers.
  Everything is great except my battery only lasts is not too long to work.

  I've searched but have not been able to find a working copy of Toshiba Power Saver that works on my laptop with XP 64.

  Any ideas or suggestions?

  Hello!

  I think that you will not find a 64-bit version of Toshiba Power Saver.
  Toshiba is not compatible XP 64 bits are therefore no available 64-bit software.

  You must use the Windows settings or change you to Vista 64-bit. Vista has more options for saving energy and it s the same as energy saving.

  Good bye

• Satellite M305d-s4830 - mic makes strong crunches

  I'm trying to video chat with my girlfriend on the computer. She has a Satellite M305D-s4830 with a built-in camera and microphone. His microphone seems to not work properly. There is loud cracking which makes it extremely difficult to hear. Skype maintains also, display a popup telling him that there is a lot of background noise.

  It makes noises regardless of whether it is expressed or not, or ether there is a noise in the room. To do this, however, seem to be worse when the laptop is resting on his knees.

  We are looking for to rid this terrible noise from the mic. Any suggestions? Is there some sort of software that allows it to calibrate the microphone at all? Or it's just bad?

  Say here, do a right-click on the speaker icon in the task bar, select recording devices then go to properties of the mic as default set, adjust volume, max the volume settings settings then add 10% boost, that's what I did when I had a problem similar with Skype. In Skype say here to go into the settings options and then audio and make sure that the right device is selected under microphone then save, everything should work ok now.

  Bball 1561 also, I have a problem and I was wondering if you could help us, recently, I reinstalled vista for the same laptop computer which you gf but I couldn't locate the drivers mic, so I was wondering if it would be possible if you could ask you or your gf to send me a copy of the drivers that they are not big so they won't serve time to send

• Very annoying high pitch noises satellite M305D-S4830

  My laptop Satellite M305D-S4830 produced very annoying high pitch noises came from the region of processor. How can I solve this problem?

  I think you should contact the ASP as soon as possible for a verification of the laptop.
  The warranty is valid. Everything should be done for free and should be covered by the warranty.

• P850 satellite - failure with the recovery partition - boot selection failed

  Hello Hello,

  My problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :
  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem:

  1. Insert your windows installation disc and restart your computer.
  2. choose your language setting and then click "next".
  3. click on "Repair your computer."

  If you do not have the disk, contact the manufacturer administratos or your system's computer.

  Status: 0xc000000e

  Info: the boot selection failed because a required device is not accessible.

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not me, work, when I go to see the Recovery Console:
  * Startup Repair
  * System restore
  * Restore
  * Tool of Diagnoctic memory of Windows
  * Command line

  Hello Hello, my problem is this: a few days ago, I update Windows and slow start is not blocked after several days decided to put the factory, always try to blur this back to the factory and is more, let me not to recognize the recovery partition, I created with Media Creator of recovery disks, but aren't working doesn't let me use me I get the following error :

  Cannot start Windows, a recent hardware or software change might be the cause. To solve the problem: *.

  1. Insert your windows installation disc and restart your computer

  2. choose your language setting and then click "next". *

  3. click on "Repair your computer." *

  If you do not have this disk, contact the manufacturer of your system administratos or computer for assistance.*

  Status: 0xc000000e *.
  Info: the boot selection failed because a required device is inaccessible.*

  I tried a thousand ways to access the partition recovery but not detected the remains because some program I can see active that turn it off, which is hidden, but still missing and I can't boot from the partition, I gave me a CD of Windows 7, I formatted the hard drive partition, that you and I have reinstalled again but driver Toshiba the problem is that the recovery partition is still but I can not access the recovery discs are not my work.

  Recovery Console has these options:
  option 1: Startup Repair.
  Option 2: System Restore.
  Option 3: image retrieval system.
  Option 4: Windows Memory Diagnostic.
  Option 5: command prompt

• Satellite L450D-11V - update recovery partition

  On my Satellite L450D-11V with Windows 7 Premium 64-bit, Tempro today said there is an important update that replaces the recovery partition with a new, to overcome the problem of error message on portable computers with more than 4 GB of RAM. Although I have only 3GB, it says that the update is for everyone because it can go to more than 4 GB in the future.

  It is all very well, so I downloaded and tried to run the .exe unpacked, but at half way through the installation, he stops and tells me that the update is only for 64 bit versions of Windows 7... which is mine. I got it for five days, it came with Windows 7 Prem 64 bit and I certainly did not use 32-bit downgrade DVD and it says clearly "64 - bit operating system" in my computer.

  Hello

  Update do you mean exactly? Can you post information please as filename, etc.. ?

  Normally there is no recovery partition. There is only one file called HDDrecovery on the second partition where you can reinstall Windows from this folder. On Vista and Windows 7, there is a hidden partition but it s the Windows recovery environment and has nothing to do with Toshiba.

  Moreover, I don t use TEMPRO because install updates manually if it of necessary.

• Error recovery partition

  I'm doing the HP recovery partition recovery for my ProBook s 4720 and 7 Home premium. It does not work well, I get two error dialog boxes:

  "The data is invalid.: recovery partition index == bootPartition" and "the installed program cannot start. Click OK to turn off the computer. »

  I got the laptop with 4 partitions on this point - score of 300 MB windows sytem, C: with system partitions and 2 HP opetating. As maximum authorized partitions were already defined, it was impossible to make my data partition D: so me I deleted the 300 MB partition and C: as active/boot. Then did my data partition.

  Is this a problem, why recovery is not working? If it is impossible to fix, I erase all partitions of HP and expand rather my data partition, maintains broken useless recovery partition.

  Thank you if you can give me some information with it.

  

  Hello

  Good idea to save the swsetup folder

  You can use the product key on the base of the laptop to activate your copy of windows, but with 2 provisions retail.

  1. the version of Windows that you are installing must match the version originally supplied with the laptop (IE if it came with Windows 7 Professional 32 bit, that's what needs to be installed.

  2. you will find that after installation, when you try to activate Windows over the internet, it will fail.  It is quite usual, all you need to do is use the 'phone method' described in the link below and it should be activated without any problems.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  Kind regards

  DP - K

• I need motherboard for Satellite M305D-S4830

  Hi Sir/Madam,

  I have a question about my Toshiba laptop.
  Last summer, I bought Toshiba M305D-S4830 of BestBuy in the United States. (Now I'm in Turkey)

  Unfortunately, when I tried to boot my laptop, there is nothing. Then, after that, I think what happened to.
  Now, my motherboard does not properly.

  That's why I need model of motherboards "M305D-S4830. Can you help me with this, please?

  Thank you.
  Cuneyt Ay.

  As far as I know books have 1 year international warranty.
  But so I would take local contact with your ASP. Did this?
  Perhaps the ASP in your country can order this part for you

  In the worst cases you need to sent the laptop to an ASP in the United States.

• Satellite M305D-S4830 cooling problem

  Hello
  I got the laptop next: Satelite M305D-S4830.

  All my features:
  * Fusion finish Horizon jacquard
  * Windows Vista Home Premium pre-installed w/COA
  * Processor Dual-Core ZM-80 Ultra, AMD Turion X 2
  * 2.1 GHz processor
  * 4 GB DDR2 SDRAM
  * 250 GB hard drive
  * Player DL Labelflash drive
  * No floppy drive
  * ATi Radeon 3100 graphics
  * Integrated audio with harman/kardon speakers
  * modem 56 k
  * Integrated 10/100 Ethernet
  * Atheros Wireless LAN (802. 11 b / g)
  * Built-in 5-in-1 Media adapter bridge
  * Webcam and integrated microphone LCD bezel
  * Keyboard with TouchPad
  * Multimedia keys
  * screen 14.1 inch WXGA LCD with TruBrite technology
  * 1280 x 800 resolution, supports 720 p content

  Good then the warmth of my processor is now 85 degrees Celsius and im only running 1 program. (a java program) My power option is now high performance.
  When I start my computer it's just a normal 45 c but when I just run some applications its going pretty fast!

  Someone knows what to do abuot? Cuze I think im not far from the fire: P

  And my laptop is standing on a table, so there is good air circulation.
  And I think my fan is at its maximum RPM. (cuze of noise)

  I hope you can help!
  Greetz Rob

  Try to use with reduced performance.
  Is it the same situation?

  It is not easy to say what the problem is here, but if you think that something is not there please contact the closest service provider and let check your laptop.
  They can test it in an idle state and working under pressure.

  Here on the forum, we can just chat and ask why this happens but it won't help you at all.
  Contact service and show them how it works. I'm sure they will have a final answer for you.

• Re: Satellite A500 - Windows error recovery

  I have a problem with my laptop

  When I restart my laptop, it tends to be stuck on this windows error recovery screen. It gives me two options
  (1) Lauch Startup Repair
  (2) start Windows normally

  Tried both, it turns off, reboots that it ends on the same screen over and over again. Tried to access it via safe mode, nothing helps. tried to fix it through windows disk 7, did not work. tried last good configuration, not good either.

  It's the screen that I always end up and it does not go further.
  http://I585.Photobucket.com/albums/ss297/fobssquad/P1010014.jpg

  Please can someone show me a few guidelines as to how can I do to fix this problem. I'm a freshman in College, I have no money to take it to a professional. That's why I try to fix it myself as I have urgent need.

  Thank you in advance.

  Hello

  Hmm, not easy, but in my opinion it s something wrong with properly installed Windows OS and HDD recovery doesn't work

  You have the Toshiba Recovery disk?
  If Yes, you can use it to restore the original settings windows. Just boot from that disk and follow the instructions on the screen, everything that s! :)

• Error recovery partition Windows 7 home Premiun.

  I have a Compaq Presario CQ57 339WM I did a recovery partition on. After, I restarted the laptop and "BOOTMGR" is missing. Could someone instruct me on how to install the BOOTMGR in the boot sector, please? Thank you.

  After turning on the laptop-everything computer as the first black screen begins to tap the F8 key to start in advanced boot to choose repair start pass system. Not that it can take up to 3 times before it is repaired.

  http://www.SevenForums.com/tutorials/104341-Bootmgr-missing-fix.html