Satellite M30X-129: CPU fan runs constantly after new XP Pro re - install

I just installed a new Samsung 120 GB drive in my M30X-129, an upgrade of the 60 GB IBM drive with what it was originally provided.

Tried ghost XP Home installation of the old drive to the new - but it didn't work for some reason, installation, attached to a page with the "Windows XP" logo on it...

So, I installed XP Pro with SP2 from scratch on the new drive.

After having done that, I then installed the Toshiba and utils drivers listed for your laptop:

NES http://UK.Computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK&mode=allMachi & action = search & teddProduct = 555

The problem I have is that the fan runs at full speed all the time - this isn't the case with the old installation of XP (was rare for it to come on at all when slowed down in the office - running full bore 100% of the time)

Research by and try a few suggestions:

-J' installed the common Utils from Toshiba
-J' installed the Toshieba power management - and set the fan speed to ' Silent' has ', but that doesn't seem to have any effect.

Any suggestions? for example. where I get the latest versions of the applications?

The noise of the fan slowly leads me to the top of the wall...

Ben.

Hello Ben

If you have installed your own OS and Toshiba designed drivers, tools and utilities, I assume that this problem cannot be software. I'm really not 100% sure why the fan always runs at full speed but Satellite M30X is around 2 years and I guess it's time to clean up. The second thing can be your new HARD drive.
It is also possible that new HARD drive produce more heat and sensors to register it and don t stop the cooling fan.

I recommend you to professionally cleaned the unit and remove any dust inside the unit. I'm pretty sure that cooling fan does not work at all times.

Also try to put the laptop into a slightly higher position (if possible at the back) and on this brand more interspace between the bureau and the cooling grill fan in the lower corner of your laptop.

Tags: Toshiba

Similar Questions

  • Equium A100 - fan runs constantly after the release of sleep

    I was faced with a problem with an Equium A100, if the system is put into mode 'sleep', and when he took over this mode the cpu fan runs constantly never turn off, this only happens when I get out of sleep mode

    Apart from this, the fan works normanly turn on for a short time, when the temperature rises and then turn off again unless I wake up sleep mode windows.

    Hello

    You didn t show all details on the installed system. However, I think that its system related issue possibly some processes that run in the background constraints and to lock the CPU, causing a higher activity of the fan.

    It would be interesting to know if the same problem occurs with the help of a new OS installed.

  • Satellite R830-182 - cooling fan runs constantly

    Hello

    I just bought the R830-182. The fan runs at 100% of the time, from that moment I start. Is it true, that I expect the fan on a laptop to kick when the CPU reaches a certain temperature? It's annoying because it's quite noisy. Also try running the laptop at the lowest possible power - no software no open, WIFI turned off, the management of the standby power battery, the screen brightness turned down etc nothing works.

    Someone out there with the same model knows if it is a problem or simply how this laptop it is supposed to work?

    Try it please change settings option method of cooling. You can find it in power advanced options for the management of the power supply you use.
    Assign the Please optimized battery option. It should reduce the activity of fan cooling.

  • Satellite P750 - after update BIOS CPU fan runs faster

    Hi all

    On my Satellite P750 (PSAY3A - 02L 001)

    Since I've updated my BIOS to version 2.40, I noticed that the CPU fan runs much faster then normal.

    Even more, when I go in options inside BIOS configuration, saving it comes up with "an invalid entry.

    Has anyone experienced this problem? Know a way to solve this problem?

    In General, old BIOS is not available when one is offered on Toshiba new download page.
    If you have older version of BIOS try to contact the nearest Toshiba service provider and ask for help. They have access to the database of Toshiba and can get the ld for you version.

    By the way: have you tried to change the power settings for the cooling method and less upgraded?
    This should reduce the activity of fan cooling.

  • Satellite M30X-129: recovery CD can be run from an external drive?

    My wifi seems to have packed - recognizes nearby wireless networks but does not connect to them - so I will try to use the recovery disk product in the hope that it will bring back wifi.

    However, the DVD Multi drive does not work - light flashes to indicate some sort of activity, but no drive appears in my computer. I think that if I buy the external drive, I can run the product recovery disc for this.
    Is the drive Toshiba external DVD SuperMulti (PA3454U-1DV2) compatible with the Satellite M30X - 129 P - M 735? Product recovery can be run from an external drive (bootable?)?

    Any advice would be greatly appreciated!

    Hello

    According to this page of Toshiba, the drive is compatible with your device:
    e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2326 & SelCategorie = 2319 & family = 2326 & selP roduct = 98795

    The fact is that only the boot device options available: USB-drive floppy/disk HARD/ODD/LAN
    I know you can only boot from external CD/DVD drive if the device supports this option and the unit.
    In my opinion be100% sure you should ask ASP for advice.

    But know one other question: do you have you boot from the restore CD to recover the operating system?
    If you want to recover the operating system, you have to start on this CD and do not run it under Windows. Check it out

  • Re: update of the Bios Satellite A500D 10th did my fan run constantly

    Hello!

    I'm in a bit of a pickle. Because I used to update my bios from 1.0 to 1.20 Tempro, my fan runs constantly at aprox. 70% this IS REALLY BORING and I can not use my new computer at school because of this! I tried to search the bios 1.0 original, so that I could downgrade, hoping he could solve the problem, but that is not to be found anywhere =)
    Will you please, please, please, and another 1000 times please, help me!

    Cordially Alekpowah

    Hello guys

    When the new BIOS is available for former download is no longer available.
    What you can do is to contact the nearest service Toshiba and ask for help. They have access to the database of Toshiba and can get the older version of BIOS for you.

  • Portege S100 - fan runs constantly

    Hello

    I have been using my portege s100 for a year now and I must say that I'm not really happy.

    The fan runs constantly, even after the update of the BIOS. Does not stop a second, everything I put in power management. It's very disappointing, because when I watch a DVD, or when I work nights, I would like to quiet little.

    I checked the forums on the web, and Toshiba without finding any solution. Is anyone aware of any way to stop the standing fan (other then remove the fan...)?

    Thanks in advance,
    Andres

    Hello Andres

    As you know, the cooling equipment is common problem on laptop computers and the market there is not many laptops that work absolutely silent. I put t even think such laptop no exist at all. Performance of your hardware is always better. Have excellent graphics and CPU performance, resulting in a lot of heat inside the laptop.

    When you are working in the zone of silence, it's quite annoying when the fun of constantly cooling fan but there is not much to do. If you simply work like writing or to check something on the net, I recommend to use the other profile in energy saving or you can manually set the speed of the CPU processing to lower the level. I also recommend you to stop all unnecessary processes.

  • iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

    Hello!

    My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

    Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

    What could be?

    Please help me!

    4ntoine

    Here is my model of iMac:

    iMac 27 "mid-2011 model 12.2

    Intel Core i7 3.4 GHz

    AMD Radeon HD 6970M 1024 MB

    OS X El Capitan 10.11.6
    SMC 1.72f2

    Boot ROM IM121.0047.B23

    reset the SMC

    Reset the management system (SCM) controller on your Mac - Apple Support

  • Kira 107 - fan runs constantly at 90%

    I have a new 107 Kira and the fan runs constantly at 90%, but I'm not under what anyone in particular (Chrome, Firefox, Spotify, Word, Excel). The noise is constant and unbearable.

    I see in the Performance Manager that the processor is clocked to 2.91 GHz even - if maximum speed is supposed to be 2.40 Ghz.

    Any idea the parameters to change to calm this fan?

    Thank you!
    G

    You could start the the Task Manager and in the process tab, you will find all background applications that would appeal to the CPU.
    Click the CPU column to display all the processes of loading the CPU.

    However, you can also try to change the option of cooling method that is available in Windows Advanced Power options.
    Go to control panel → power options.
    Click here on the power plan that is currently in use.
    Then click on advanced power options and access the cooling method.

    Here you can change it from active to passive.

    In addition, you can decrease the status of CPU max at 90-95%

  • Portege Z930 - fan runs constantly

    I installed W10 on my Z-930 protégé and it worked perfectly. During December Windows Update automatically installed a major update for the W10 and now the fan runs constantly, even when the laptop starts up and CPU is very cold.
    Can someone help me?
    Thank you

    Install and run Toshiba Service Station, all public services update.
    Also update the BIOS.

  • Battery Tecra M11-130 with not power and the fan runs constantly

    We are having a problem with the battery on one of our laptops. When left for an hour or two the laptop turns off because the battery is dead. We have mounted a battery new but still only get about 1.5 hours.
    In addition, the fan runs continuously. I looked at the PC Healthcheck software which shows as follows:
    * Power *.
    Other costs 14%
    40% of energy consumption system
    Good battery
    * Temperature and fan *.
    CPU temperature 67%
    System internal temperature 56%
    88% fan speed

    I would like suggestions.

    > We have mounted a battery new but still only get about 1.5 hours.

    1.5 hours is a common value, you should consider that dough working time depends on its portable use.

    Battery needed to dump a lot faster if the CPU would be stressed out a lot in your case, that something could run in the background, lose power CPU performance and the dough.

    In addition, you said that the fan runs constantly this could discharge the battery too.
    Therefore, it would be interesting to know what process emphasizes the central unit.

    Start the Task Manager and check the processes tab. In the CPU column, you can find the process that emphasizes the central unit.

    In addition, to change the settings for the CPU performance and cooling of the activities in the options of Win 7 powers that would help to increase the performance of the battery.

  • Equium A60 - fan runs constantly

    Equium A60. 5 years old. For years, the fan is running constantly. Even in winter, and when little ongoing transformation.

    Help. Beginner language please.

    Hello

    After 5 years of use, I think that your laptop is full of dust. Dust blocks the flow of air and the laptop cannot be cooled correctly. Because of this cooling fan runs constantly and try to cool down the hardware components.

    In my opinion the first step you need to do is clean up your laptop. If you want to do this properly the laptop must be dismantled. I don't know if you can do it alone without manual maintenance, but if it must be done on the service business contact way and let them do it for you.

  • Cooling fan runs constantly on my Portege S

    I just bought a laptop Portege S and fun kept to never stop and it bothers me. I tried to reduce the power through the Manager of power, but to no avail.

    All solutions? Thank you!

    [Edited by: admin]

    Hello

    The fan runs constantly if you get into the BIOS?
    If Yes, then maybe it can be defective.
    In such cases, you should ask the guy to service for assistance.

  • Satellite M30X-129: Microphone does not work

    My Satellite M30X-129 was working well until I reinstalled the operating system.
    Since then, the Microphone does NOT work. I installed the audio drivers from the CD utilities & tools, but it does not work.

    Can anyone help?

    Hello Grondin

    Sorry, but I must ask you something. You speak internal microphone or external?

  • Satellite M30X-129: card SD2 BT does not work

    I can't get my SD2 BT working on my satellite M30X-129, I get Bluetooth is not ready when trying to make a connection, I'm not sure if it's to do with the SD card drivers or... any ideas please

    Hello

    As far as I know there should be a CD that was shipped with this card.
    There you should find the drivers for this card. If the drivers on the CD don t work then try to update with the latest version.
    For this, you can check this site:
    http://APS.toshiba-tro.de/Bluetooth/

Maybe you are looking for

  • How to send a message to a list of address book as "BCC", not "at"?

    I have different lists for different people on my personal address book of TB. If I press "Write" (for a given group), TB by default creates a message with all recipients in ' to the ' mode - i.e. all recipients will see the e-mail addresses of each

  • versions of Firefox 26,27 and 28 is don't work on win7 32 bit

    I changed my computer win xp sp3 for win 7 (I have 32 bit os). I have found that versions... 26, 27... and 28 are incomtable with this os. 25 version is ok. What updates and how to maintain them.

  • WJA - has no alerts - inaccuracies of data collection

    I've been running Web Jetadmin v10.2.7491B on a Server 2003 during approximately 3 years. There are 120 managed printers consisting of 9 different models. Question #1 Initially, I got alerts configured on all printers that would send an email when a

  • OpenFlow + LEAGUE

    Hi guys. I want to configure openflow and the SDN technology. For the first time I want to test it on cisco7613. But I don't ' know not of what start. Can you give some advice. I did find some examples on the Internet. Thank you.

  • SigTool does not recognize my new key

    I'm running the BlackBerry password Code base signing for my own service of signatory. I created the key and sent the ITUC leader to me and went through the process of registration with my server However, when I try to sign my code using the Signatur