Satellite M30x-129 takes too long to start

Similar Questions

• Toshiba satellite with Windows8 takes too long to start (5 min)

  I have a

  Toshiba satellite i7 L845; 6 GB; 64 bit

  I turn off a lot of start up programs with MSCONFIG.exe (except Windows); When I reinicieted it works correctly (restart in seconds), but if you turn off and on again, the slow restart reappear.

  Your advice, I will apreciate.

  Hello

  Check with Toshiba Support, their drivers and documentation online and ask for their
  Forums about known problems.

  Toshiba - Forums
  http://laptopforums.Toshiba.com/

  Toshiba - Contacts
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/navShell.jsp?CF=su_contact

  Toshiba - drivers - access your model
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba - Support
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  You must also use a process of elimination methods to determine what startup programs
  affect your boot. And it could be more than one and even a combination. Remove items
  you need not start.

  ========================================

  These should help:

  Ways to improve the performance of your PC
  http://Windows.Microsoft.com/en-us/Windows-8/improve-PC-performance

  Maintenance & performance
  http://Windows.Microsoft.com/en-us/Windows/performance-maintenance-help#performance-maintenance-help=Windows-8&V2H=win7tab1&V3H=winvistatab1

  Crashes Windows or freezes
  http://support.Microsoft.com/kb/2681286

  How to speed up your PC
  http://support.Microsoft.com/kb/2746761/en-us

  =======================================================

  You use a 3rd party antivirus/antispyware/security program? If so many people
  can cause slow start from the bottom.

  Check with the support of the system Maker (manufacturer of motherboard for customized systems), their
  online resources and the drivers and ask questions in the forums about known problems.
  Updating the BIOS , drivers of low level chipset and embedded and separate major
  device drivers (anyone who can have an impact on the speed of startup and performance).

  Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
  According to needs). Win + D key calls the office and using Win Key active / disable the office and
  Splash screen.

  Check startup programs.

  Right-click in the left lower corner - Manager of tasks
  Or Windows key + X - Manager of tasks
  Or right click on the taskbar - task manager

  Check the Startup tab.

  More troubleshooting:

  How to perform a clean boot for a problem in Windows Vista, Windows 7,
  or Windows 8
  http://support.Microsoft.com/kb/929135

  Other programs to help:

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  =======================================================

  If necessary:

  Try to do a "Refresh your PC without affecting your files" (or modification of your personal data
  settings) or even a restore. Be prepared to re - install the programs, applications will remain.
  And having redundant backups of your files on the disk main hard is always a
  good idea.

  Windows 8 includes special discount methods (keep files and settings) or a reset
  (new installation remove all).

  How to restore, refresh or reset your PC
  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  How to create a system image to refresh your PC in Windows 8
  http://support.Microsoft.com/kb/2748351

  How to update Windows 8
  http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.html

  How to reset Windows 8
  http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.html

  If you need a repair disc:

  Create a system repair disc
  http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-disc

  How to create a "system repair disc" (CD/DVD) in Windows 8
  http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html

  How to create a recovery USB in Windows 8
  http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Hyperion EPM services take too long to start

  Hyperion 11.1.2.3

  Windows 2008 R2

  32 GB of memory on each server

  Java 1.6.35

  Server environment four (Foundation/FDMEE, planning, Essbase and SQL server).

  Some how it takes too long to start the services of Hyperion. Using the batch script to start all services. Can someone advise where to start looking. Here's the log of HyS9Planning_SERVER-sysout. If this can give an idea

  < 12 February 2014 12:40:34 hours EST > < Info > < security > < BEA-090905 > < disabling CryptoJ JCE provider auto-intégrité for better startup performance. To allow this control, enter - Dweblogic.security.allowCryptoJDefaultJCEVerification = true >

  < 12 February 2014 12:40:35 hours EST > < Info > < security > < BEA-090906 > < change the default Random Number Generator in RSA CryptoJ of ECDRBG to FIPS186PRNG. To disable this change, specify - Dweblogic.security.allowCryptoJDefaultPRNG = true >

  < 12 February 2014 12:40:35 hours EST > < opinion > < WebLogicServer > < BEA-000395 > < according to the contents of the extensions added at the end of the classpath directory:

  D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\audit-client.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\css.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ctg_custom.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\ldapbp.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\opencsv-1.8.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\registry-api.jar;D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\lib\wlpool.jar>

  < 12 February 2014 12:40:35 hours EST > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.5-50-153520-1.6.0_37-20121220-0844-windows-x86_64 of Oracle Corporation >

  < 12 February 2014 12:41:19 hours EST > < Info > < management > < BEA-141107 > < Version: WebLogic Server 10.3.6.0 Mar 15 08:52:36 PST Nov 2011 1441050 >

  < 12 February 2014 12:41:43 hours EST > < emergency > < management > < BEA-141151 > < Management Server could not be reached at http://hydevf01.uts.mcmaster.ca:7001. >

  < 12 February 2014 12:41:43 hours EST > < Info > < Configuration Management > < BEA-150018 > < this server will be started in mode of managed server independence in the absence of the admin server. >

  < 12 February 2014 12:41:43 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  < 12 February 2014 12:41:43 hours EST > < Info > < WorkManager > < BEA-002900 > < self-adjusting Initializing of thread pool >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log00014. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log. >

  < 12 February 2014 12:41:44 hours EST > < opinion > < Log Management > < BEA-170019 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\Planning0.log server log file is opened. All events in the log server-side will be written to this file. >

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 12573

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storage TP 0 as CN = Entrust .net Secure Server Certification Authority

  TP-1 treatment

  Storage TP 1 as CN = Entrust .net Secure Server Certification Authority 1

  Treatment of TP 2

  TP 2 storing as authority of Certification CN = Entrust .net (2048)

  Treatment TP 3

  Storage of TP 3 in CN = GTE CyberTrust Global Root

  TP 4 of treatment

  TP 4 storing as OU = Secure Server Certification Authority

  Treatment TP 5

  TP 5 storing as UO = class public primary Certification Authority 1

  Treatment TP 6

  TP 6 by storing like UO = class public primary Certification Authority 2

  TP treatment 7

  TP 7 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage of Secret4

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret5

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret6

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret7

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  OracleFileSSOWalletImpl.getWalletData: enter...

  OracleFileSSOWalletImpl.getWalletData: System.getProperty (user.name) = sp_hydevadm

  OracleFileSSOWalletImpl.getWalletData: dummy sso (shared) file locking...

  OracleFileSSOWalletImpl.getWalletData: locking (shared) file sso...

  Oracle Wallet: Pocket size 3941

  OracleWallet: getSecretStore

  OracleSecretStore: load flow wallet

  OracleSSOKeyStoreImpl: engineLoad

  OracleKeyStoreSpi: Load flow wallet

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: found cert bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: found secret store bag

  OracleKeyStoreSpi: Safe opening 0

  OracleKeyStoreSpi: Safe opening 0

  Treatment TP 0

  Storing TP 0 as UO = class public primary Certification Authority 1

  TP-1 treatment

  Storage of TP 1 in CN = GTE CyberTrust Global Root

  Treatment of TP 2

  TP 2 by storing like UO = class public primary Certification Authority 2

  Treatment TP 3

  TP 3 by storing like UO = class public primary Certification Authority 3

  OracleKeyStoreSpi: Storage Secret0

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret1

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret2

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Storage Secret3

  Get the sequence of bag

  Get the alias of sequence

  Get the secret of the sequence

  OracleKeyStoreSpi: Keystore loaded

  OracleWallet: getSecretStore

  < 12 February 2014 12:42:11 hours EST > < opinion > < security > < BEA-090082 > < security initialization using security realm myrealm. >

  < 12 February 2014 12:42:55 hours EST > < WARNING > < JTA > < BEA-110503 > < migration tool (the AdminServer for JTA manual migration policy, or the captain Singleton for automatic migration JTA strategy) is not available. Jump JTA TRS restoration because isStrictOwnershipCheck is [false]. This may cause corruption of potential TLOG if TRS of Planning0 has been migrated to the backup server and the backup server accesses the TLOG of Planning0. More security can be achieved by setting isStrictOwnershipCheck [true]. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320400 > < D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log log file will be rotated. Reopen the log file if stopped tailings. This can happen on some platforms such as Windows. >

  < 12 February 2014 12:42:56 hours EST > < opinion > < LoggingService > < BEA-320401 > < log file was shot in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log00030. Log messages will continue to be logged in D:\u01\Oracle\Middleware\user_projects\domains\EPMSystemHYDEV\servers\Planning0\logs\access.log. >

  < 12 February 2014 12:43:01 hours EST > < WARNING > < oracle.dms.jrockit.jfr > < DMS-58041 > < The JRockit FlightRecorder class declares that it is not active and so the DMS cannot use it. >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server changed to STANDBY status >

  < 12 February 2014 12:44:01 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed initially >

  Using the OraclePKI provider

  taken javax.net.ssl.TrustManagerFactory supported

  taken javax.net.ssl.KeyManagerFactory supported

  Using the OracleJSSE103 provider

  < 12 February 2014 12:47:37 hours EST > < WARNING > < security > < BEA-090668 > < ignored the role 'Admin' resource deployment ' type = < url >, application is DMS Application #11.1.1.1.0, contextPath = / dms, uri = / ">".

  < 12 February 2014 12:51:03 hours EST > < WARNING > < oracle.adfinternal.view.faces.partition.FeatureUtils > < ADF_FACES-30130 > < without taking into account the dependence of the feature on the function "AdfDvtCommon".  There is no such feature. >

  ATTENTION: From post-deployment of ADF library jar on WebLogic Server. "Provider-lazy-inited" init-param missing LibraryFilter? Ignore this warning if the ADFJspResourceProvider is not used.

  On the road: ADF library non-ADFJspResourceProvider after deployment

  Finishing: ADF library non-ADFJspResourceProvider after deployment (millis): 16

  null

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000197 > < listening for cluster communications using unicast cluster messaging >

  < 12 February 2014 12:51:17 hours EST > < opinion > < Cluster > < BEA-000133 > < waiting to synchronize with other members in the planning stages. >

  < 12 February 2014 12:51:22 hours EST > < WARNING > < Log Management > < BEA-170011 > < The LogBroadcaster on this server has no messages to the server admin log. The server administrator can not run. Emissions of message to the administrator of the server will be disabled. >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < server status changed to ADMIN >

  < 12 February 2014 12:51:48 hours EST > < opinion > < WebLogicServer > < BEA-000365 > < Server State has changed for RESUMING >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Cluster > < BEA-000162 > < "async" replication service to start with remote cluster address "null" >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default" is now listening on 172.26.55.119:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [2]" is now listening on fe80:0:0:0:0:100:7f:fffe:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < channel 'by default [5]' now listen on 0:0:0:0:0:0:0:1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [4]" now listen on 127.0.0.1:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "[1] by default ' is now listening on fe80:0:0:0:385e:468:a776:2aac:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < opinion > < Server > < BEA-002613 > < Channel "Default [3]" is now listening on fe80:0:0:0:0:5efe:ac1a:3777:8300 for protocols iiop, t3, CLUSTER-STREAM, ldap, snmp, http. >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < Server > < BEA-002611 > < Hostname "HYDEVP01.uts.mcmaster.ca", corresponds to multiple IP addresses: 172.26.55.119, fe80:0:0:0:385e:468:a776:2aac % 14 >

  < 12 February 2014 12:52:24 hours EST > < opinion > < WebLogicServer > < BEA-000358 > < started WebLogic independent server managed by "Planning0" for the domain "EPMSystemHYDEV" running in Production Mode >

  < 12 February 2014 12:52:24 hours EST > < WARNING > < JMX > < BEA-149510 > < could not establish connectivity JMX with the Administration Server AdminServer to < JMXServiceURL:null >. >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,430 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,427 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:39 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,429 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:40 hours P.M. > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,428 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,441 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,442 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,443 for the configured timeout of 5 seconds >

  < 12 February 2014 12:52:49 hours EST > < WARNING > < Socket > < BEA-000449 > < socket closure as no data read on 172.26.55.119:52,439 for the configured timeout of 5 seconds >

  Do you still have this problem after restarting the server?

  See you soon

  John

  http://John-Goodwin.blogspot.com/

• Hearing of 2015 CC takes too long to start

  Hearing of 2015 CC takes too long to start. As more than a minute.

  Using administrator rights does not make a difference.

  Fresh install... even though I updated from Windows 8.1 to 10 Windows (Windows updater) and I had hearing in Win8.1 so... is there any cleaner Adobe application that I could use to solve this problem?

  I found the solution!

  Simply find the file dynamiclinkmanager.exe on any folder of Adobe products, that is having this same problem, and remove the extension (.exe) format to it.

  Confirm the action and open the hearing as quickly as it should.

• HP ENVY 15-j110, takes too long to start

  Hey guys I have HP ENVY 15-j110 I bought recently, but now, after a month it takes too long to open and sometimes only a black screen.

  He

  Product number is this #ACJ F6C58PA

  answer as soon as possible.

  This could be due to the application running in the back ground and starting applications. Try

  Selective startup:

  http://Windows.Microsoft.com/en-us/Windows/Run-Selective-startup-system-configuration#1TC=Windows-7

• Satellite A300-23d needs too long to start

  Hi all

  I have a Satellite A300-23d.
  The problem is that it takes too much time on the login screen 'Please wait '.

  I did try the recovery since the DVD and start the system, but still have the same problem, and diagnose the startup has not detected any problem.

  Can someone please?

  Hello

  I think I could help you
  I had the same problem with my laptop. The start-up procedure is too long (about 3 min).
  I have updated the Tempro software and disabled some background processes in the MSCONFIG Startup tab.

  This has helped to decrease the boot time of one min.
  I think it's very good improvement.

  Welcome them

• Satellite P100-203 takes very long to start upward

  I bought my computer Satellite P100-203 in October 2006, since day 1, it takes a lot of time that the computer is ready with commissioning. WXP MCE is installed. I think that a computer with Intell T2500 dual core 2.0 GHZ/1024 MB should be ready in a minute...

  Someone at - it an idea may be what the problem?

  Hello fred,.

  Believe me, the laptop with dual core 2.0 GHz CPU doesn't faster start as a laptop with a Pentium 4 2.0 GHz.
  The question is. What and how many applications will load at start up?

  Many applications making it slow and long start-up procedure. I think that you use Anti virus software. If you disable the startup of these applications at the beginning, the phone should start a lot faster

• OfficeJet 7500 a take too long to start to print.

  Hello

  I recently purchased the Officejet 7500 has, for its ability to large format. Very often, after clicking 'Print' in my app Apple Pages, a very long time (several minutes) will pass like the computer "looks" for the printer. Also, as often, once she found the printer it will take a lot of time to 'connect' to the printer. Last night at 23:00, I clicked on print. This morning at 07:00 it was always "sends data to the printer." The document is a simple pagle.

  When I try to use the HP utility he also takes a lot of time to 'communicate' with the printer and just hanging there.

  This problem is not always the case. Sometimes I can print several pages without interruption, but all too often, there is a long long long time. This NEVER occurred with my previous Epson printer.

  The printer is directly connected to my Mac via the USB cable.

  Someone has an idea what could be the problem and how can I fix?

  Thank you

  Brian

  Thanks, I found this article, and it seemed to do the trick.

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Computer laptop dv7 takes too long to start

  About two weeks ago, I buy a laptop pavilion dv7-4165dx because I really like the features of the laptop. When I turn on the computer, it took about 10 minutes to start after the initial installation. I got at best buy because I thought it was a faulty hard drive, because any given work very well, at best buy told me that the laptop was fine and had no problems. But I still have the same problem because take laptop about 3 to 4 minutes at the start he crashes in the welcome message, after I typed my password. I have already updated all drivers and BIOS, can someone help me.

  Hello

  I would get Best Buy to replace the notebook that you really shouldn't have these kinds of issues with a whole new machine.  It could be that the Windows image is bad, or some other hardware related issue.  I would definetely get that he replaced however.

  All the best,

  DP - K

• Satellite A300-1QD needs too long to start

  Hi all!

  I'm sorry first of all, my English is very bad - but I hope you can help me.

  I have owned my laptop with Win XP-Home Edition and I have performance problems.
  As a first step that the hard drive has been changed because they said, it is the problem.

  Now, I need the NB for work or school.
  It's so slow that he needs about 5 minutes to start.
  I checked the hard drive and the RAM with a special test program an everything is OK.

  My friend told me, I should look on a chipset-trials-of program on the toshiba site. I can't find someone.

  Maybe someone in this forum knows about this problem.

  Thank you much for the help!

  en layer

  Hello

  You are currently using Windows XP or other OS?

  I think it's just a software problem and should apply to performance tweaks to make Windows faster.
  First, you must remove all unnecessary software, such as trial versions or more. Check-online Add/Remove programs from the control panel.
  After that, clean the registry of Windows using CCleaner.
  In addition, turn off all programs that you start n t need in msconfig (start-run-msconfig online online).
  Last but not least to defragment your HARD drive.

  Here in the forum, there are some very interesting discussions on how to make Windows faster. If you use the forum search to find the discussions he s really useful!

  Good bye

• After changing the MagSafe adapter, macbook pro takes too long to start the video

  After changing the map of 85 W MagSafe, time to start the computer has become excessive (2 minutes). The screen lights up immediately, but the video appears after 2 Min.

  Once started, the performance of the computer are OK.

  This anomaly occurs after the change of the adapter, it's never happened before.

  Try a SMC reset:

  https://support.Apple.com/en-us/HT201295

  Ciao.

• After the upgrade of RAM it take too long to begin and start windows.

  Original title: laptop

  Hello

  I have (HP compaq presario V6615EN)
  Core 2 duo 1.83 GHz
  2 GB OF RAM
  Windows vista Home premium 32-bit
  It took 20 seconds to start and windows boot
  (Yes, only 20 seconds)
  When I upgraded my ram to 4 GB it takes too long to start and windows boot
  nearly 160 seconds

  Hello

  1 - is the operating frequency of the matches with the 'old' RAM newly installed?
  2. how many RAM sticks are there?
  
  Let's try the following steps:

  Also launch memory diagnostic tool. How will I know if my computer has a memory problem?

  http://Windows.Microsoft.com/en-in/Windows-Vista/how-do-i-know-if-my-computer-has-a-memory-problem

  If there are 2 RAM sticks, remove one RAM Strip and check the speed. You can also try to swap the RAM sticks and check.

  For more help, I suggest that you post your question in the HP support forum.

  http://h30434.www3.HP.com/PSG/

• My daughter Air2 IPad takes too long to save. It is connected to wifi, connected and the screen is locked.mAny advice?

  My daughter Air2 IPad takes too long to save. It is plugged in, connected to wifi and the screen is locked. Any tips?

  How long is too long? If it lasts for more than a few hours - and even that is too long in my humble OPINION - then something is wrong. Completely backup, because it will not terminate in any case if its been so long, forced to reboot the device and try again.

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

  This may not work either. The backup may be damaged and you will need to remove and start over. However, its easy starting point and it will not hurt anything. If the backup will not end, he has nothing to lose.

• Satellite M30X-129: recovery CD can be run from an external drive?

  My wifi seems to have packed - recognizes nearby wireless networks but does not connect to them - so I will try to use the recovery disk product in the hope that it will bring back wifi.

  However, the DVD Multi drive does not work - light flashes to indicate some sort of activity, but no drive appears in my computer. I think that if I buy the external drive, I can run the product recovery disc for this.
  Is the drive Toshiba external DVD SuperMulti (PA3454U-1DV2) compatible with the Satellite M30X - 129 P - M 735? Product recovery can be run from an external drive (bootable?)?

  Any advice would be greatly appreciated!

  Hello

  According to this page of Toshiba, the drive is compatible with your device:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2326 & SelCategorie = 2319 & family = 2326 & selP roduct = 98795

  The fact is that only the boot device options available: USB-drive floppy/disk HARD/ODD/LAN
  I know you can only boot from external CD/DVD drive if the device supports this option and the unit.
  In my opinion be100% sure you should ask ASP for advice.

  But know one other question: do you have you boot from the restore CD to recover the operating system?
  If you want to recover the operating system, you have to start on this CD and do not run it under Windows. Check it out