Satellite M30X-165: Mat * a UJ - 831 S is not read and write any DVD

Similar Questions

• Satellite M30X - 165 Win XP Pro SP2 sound does not work

  Hello
  on my Satellite M30X 165 I simply get no sound output, if I look in Device Manager I see installed Realtek AC97 audio drivers but if I look at the Menu "Sounds and Audio devices" I see "No. Audio Device" in Control Panel, I use the Realtek drivers you can get from the Toshiba Homepage , the file is called sound-sm30-xp - 51005620.zip everyone has an idea? It's a freshly installed system not exceeding 4 Application installed at all (not even the bureau installed yet)

  If it's any help I have 2 unknown devices "PCI Flash Memory" and I don't know what it could be for I have no pcmcia cards connected and nothing more except Lan and mouse / keyboard.

  Post edited by: LaVey

  Noise appears on the recovery image installed Toshiba?

  If Yes, I assume that you have installed the operating system from the Microsoft CD and Toshiba drivers and utilities in the wrong order or some drivers are missing.

  But maybe the his doesn t appear due to the installation of SP2.
  I read in the Sp2 installation documentation (found on the Toshiba driver page) that maybe the Yamaha AC - XG driver sound 6.13.10.2152 must be installed.

  Anyway, please check this possibility.

• M30x-118 DVD not read and write all formats

  Having problem with m30x-118 (Mat * a uj-820 s). It is not reading the cd - r/rw and DVD + r/rw but read commercial perfectly all cd/dvd - like video dvd or toshiba installation cd.
  While trying to open the disc - "d:\ is not accessible incorrect function" appears.
  Nero recognizes empty disk inserted, but having power calibration error.

  Ramasst running, driver dvd reinstall does not help.

  Hello

  The "power calibration error" message is a problem that occurs with the more recent writers as older. These means of error message that the CD/DVD writer cannot write in the blank CD/DVD because it can t match the output power of the laser power to write CD/DVD.

  Please check this page useful:
  http://www.electricattic.NET/en/mediumspeederror.htm
  http://www.dvdplusvideo.com/dvdguide001.html

  You will find an advice and information why these problems occur.

• Cannot read and write CD/DVD on Satellite Pro L40 - 17F

  I have problems with my laptop (model: Satellite Pro L40 - 17F Cel - M 540 1.83/1GB/120GB 15.4).
  I have problems with the dvd player. When I got the laptop I managed to install a few things but now - on a two weeks later, I can't read or write CDs or DVDs.

  I checked many solutions to fix but does not work. I uninstalled the driver and restarted my computer and it reinstalled the same as that which does not once again.

  Please help me!

  Hi mate,

  may I ask what fire you´ve applications installed on your machine? I ask for the following reason:

  Several installed burning applications may interfere each other, so could not stop the drive works properly.
  Please, try the following:
  Find somewhere a linux cd or something that you can start from, and then try to start and when the disc turns and starts him CD then you know that your problem is not hardware partners, it s more a problem located somewhere in your Windows operating system.

  If the player wouldn even turn or start the inserted media then you know that the reader has some hardware malfunction and must be replaced.
  I guess you still have a warranty on your machine, if yes, then contact the nearest authorized service provider in your country and tell them your problem.
  They are able to help you and solve this problem.

  Welcome them

• Satellite 1410-801: Drive is not read and write many CDs

  Problem with Toshiba DVD - ROM SD-R2212 Drive on a Satellite S1410-801.
  Help, please!
  My drive doesn't read many CDs and I can't write any CD too?

  Hi Wade

  The fact is that readers cannot read all cd or dvd media.
  You should first check different media from different manufacturers.
  As far as I know, you should find a list with the media CD and DVD tested and supported in the user manual.
  I use the TDKs and I m very happy

• Satellite M30x-165: OpenGL in the graphics driver is old

  Hello

  I have a Satellite M30x-165.
  I downloaded and installed the latest drivers from the page Web of Toshiba.

  When I check the version of the OpenGl driver it says that the version is 1.5.4454. Recently, I heard that this version is very old and may cause some problems with certain programs.

  The computer does not install the downloaded driver directly from ATI Web page.

  How can I update the version of OpenGL?

  Thank you well in advance.

  Greetings,
  Argonis

  Hello

  The M30X isn't the new laptop series and therefore the graphic driver seems to be not updated to the latest state
  Graphics drivers that are released in the Toshiba page are designed especially for Toshiba laptops and there is a big difference between the Toshiba and the drivers of the ATI page. So it's not easy to install the ATI drivers on laptops OS.

  But there is one thing; first of all, you can unzip the package and then you could try to update the driver through Device Manager. Here, you point to the folder decompressed driver to update the graphics driver.

  This allows you to install non-Toshiba divers would help the Toshiba notebook.

  But note; These drivers are not certified for the use of the laptop and so you can ONLY use and YOUR OWN RISK.

• Satellite M30X-165: new HARD drive does not work

  Hi, I want to replace the old hard drive, HITACHI 80 GB in my Satellite M30X 165. I bought SEAGATE Momentus 5400.3 120GB but it seems that it may not be recognized by the BIOS. Anyone know what to do or what types of discs can be used in this notebook? Thanks for help.

  Hello

  Sometimes a bios update has solved many issues about installing new hardware.

  BUT Please note: the Bios has a limitation of size of HARD drive support. Not all sizes are supported. I guess that the 120 GB are too big and therefore you can not use it!

  You must switch to a smaller size. Check with a 80 or 100 GB HARD drive

  See you soon

• Satellite M100 - can only read and write CDs.

  Hello
  I use a Satellite M100 Version PSMA0L-18203E on windows xp sp3. My DVD writer model is HL-DT-ST DVDRAM GMA-4082N.

  The problem is an am able to read and write Cd but when I insert a blank dvd, it displays "Please insert a disk in the drive" so that I am able to use Recovery DVD ROM from Toshiba with no problems. Please help me.

  Hello

  As wrote Al - Ex what program you use to burn discs? I have good experience with Nero and CD Burner XP. Can you test with one of them, please?

  In addition, you must also use high quality media. I have good experience with the types of DVD-R Verbatim and TDK.
  What DVD's that you have?

• Satellite M30X-165 - need a driver for the PCI Flash memory

  Hey,.

  I need a driver for the PCI Flash memory, I have already searched the web and posted in other Forums, but I can't find anything. I heard he is hidden somewhere in another file... ? !
  I have a toshiba sm30X-165

  I would be very happy if someone can help me!

  Kind regards

  Freddy

  Drivers for Satellite M30X are placed in the archive on the European driver Toshiba page.
  Product type choose Archive.
  Then the Satellite-> Satellite M-> Satellite M30X

  There, you must download and install the Cardbus and Chip Set Utility driver

• Satellite M30x-165 - screen is black

  Dear all,

  Unfortunately, my screen is black.

  Whenever I start my laptop / notebook my screen (display / monitor) is black.

  I can't use my laptop because I don't see anything. The system works.

  Why does this happen?
  What can I do against it?

  I'd appreciate any help.

  Best regards
  JJ

  Hi JJ,

  A friend of me had the same problem on his Satellite M30x too. He didn t see an image on the monitor internal but external monitor works properly.
  Also, do you have plugged an external monitor to the laptop? You see an image on the external monitor?

  However, after testing an external monitor that works, he replaced the internal screen FL inverter and the laptop working again properly. :)

  If t, you can see an image on the external monitor too, it seems to be a hardware problem, maybe the card mother or something else.
  You can access the BIOS?

• Satellite M40 - required Mat * a UJ - 831 part number S and how to remove it

  Hi all!

  I have a problem with my Toshiba Satellite M40 especially on the DVD player.

  I suspect that this could be the drive is a failure (after 3 years of service?). I intend to replace the drive, but I don't know how to disassemble.

  With that, I want to know the REFERENCE NUMBER of my DVD player so that I can replace it. Here's my current system information.

  product: Satellite M40
  Seller: TOSHIBA
  version: PSM40E-08E03EAR

  I would appreciate any help on this matter.

  Thank you.

  Eduardo

  Why you need a reference number?
  According to your post, the laptop was equipped the carpet * a drive UJ - 831S

  In addition, you should find some details about compatible ODD in your user manual.

  Last but not least the CD/DVD drive can be removed very easily from the M40.
  You must remove the screw at the bottom of the unit. This screw secures the ODD.
  As I m not wrong not the keyboard must be removed because under the keyboard, you will find a latch that needs to be pushed too much.
  Then the STRANGE should come out.

  But note; Don t use any force and ask the computer technician mobile support if you don t have enough experience.

  Welcome them

• Satellite M30X-165 - broken HDD, need to be replaced

  Hello

  2 years and a few months after I bought the M30X 165, the hard drive has some corruptions (it's a Hitachi drive) and the tool manufacturer for consistency checking shows some errors. Hitachi offers a three-year guarantee for these hard drives (Travelstar).

  1 but I guess that it is not possible to get the replaced disk (because I bought it with the Toshiba system). Fix?
  2. what would be a good replacement for the reader? [Http://westerndigital.com/en/products/Products.asp?DriveID=346] is a?

  > 1. But I guess that it is not possible to get the replaced disk (because I bought it with the Toshiba system). Fix?
  To my knowledge the laptop is covered by the warranty for a year. If you register on the page of Toshiba notebook you could get an extra year warranty (2 years total).
  If pieces of hardware will die after the warranty expires, you pay for the replacement.

  > 2. What would be a good replacement for the reader?
  The laptop supports the IDE if you buy and IDE HDD.
  In addition, you must make sure that the size of the HARD drive is supported by the BIOS.
  In my opinion the 250 GB not are just too. Try a 120 GB. I think that it should be compatible.

  Best regards

• Satellite A100: drive is not read most of the dvds

  I have a Satellite A100 with the following specifications: [information on PC]
  Model name Satellite A100
  Part number PSAA9E-xxxxxxx
  Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
  BIOS Version 1.30
  Processor Genuine Intel(r) CPU T2300 at 1.66 GHz
  RAM 1024MB of physical memory
  Disk capacity hard 80,286,958,080 [bytes] 74.773 [GB]
  Capacity of the hard drive space free 27,243,552,768 [bytes] 25.373 [GB]
  Video ATI Mobility Radeon X 1600 version = 8.204.0.0

  IDE Device 1 TOSHIBA MK8032GSX
  Interface IDE 2 no
  Version FW IDE Device 3 HL - DT - ST DVDRAM GMA-4082N = HV02
  Interface IDE 4 no
  Interface IDE 5 no
  Interface IDE 6 no

  [Information QFE]
  Windows Update "KB888111WXPSP2".
  Windows Update 'Q147222 '.

  The problem is that I can't open most of the DVD. Some of them were ok before, but lately when I am tring to open just blocks. The light just flashes and nothing happened...

  Can someone help me, please?

  Hello

  It is a never-ending story.
  Many media doesn t work with my drive. I have tested many media from different manufacturers and now I use a some of the TDK media.

  Generally, you will find in the manual the user who must be preinstalled on your laptop a list with compatible and supported CD and DVD.
  These media should work properly and the reader must read and burn without any problem.

  But of course, sometimes a failed drive can be a reason for no reading or no combustion.

• Satellite P300 - 1 9 - is not read or write CDs

  I have a new laptop Satellite P300 - 1 9, which has the Pioneer DVRTD08A combo player. (+ Windows Vista, updated firmware and drivers).

  The problem is that he does not read write or see even any CD! When a CD is inserted and as I click on the CD/DVD drive icon in Windows Vista, it makes noise repositioning for a few minutes and then he said: 'no disc '. Tried CD, CD - R and CD - RW Verbatim quality - still...
  At the same time, the disc works with any DVD.
  So I'm not shure, but I guess that should not be a hardware problem (like the lens dirty), I suppose also that is not a problem of filters in the registry, otherwise he would not see all the disks...

  Someone has an idea how solve it?

  > When a CD is inserted and as I click on the CD/DVD drive icon in Windows Vista, it makes noise repositioning for a few minutes and then he said: 'no disc '.

  This problem appears after the update of the firmware or it seemed before?
  What firmware version did you use?
  Have you checked if the CD/DVD drive has been recognized in the BIOS?

  I checked the page European driver of Toshiba and there are a few different firmware updates.
  But not all are designed for DVRTD08A.

  The update of the firmware v1.54 was designed for DVRTD08A and these FW Update resolves the error, the STRANGE does not stand on the SATA AHCI mode

  However if the CD/DVD drive is recognized by the BIOS and Windows operating system then this problem could be related to the hardware failure and in this case the material should be checked and replaced if necessary.

  See you soon

• Satellite A300-146 - CD/DVD read and write the question

  I have Toshiba Satellite A300-146, model No.: PSAJ0E, 1 GB of RAM, Intel Dual core 1.87 processor, chipset Mobile Intel (r) 965 family
  I use the windows7 RC version.

  My DVD burner does not work correctly.

  (* 1) not read 700 mb CD and don't read do not more DVDs.*
  A few months ago he read sony DVD, read all CD and dint read some local DVD. Now, it is not read sony DVD and and all the CD that I used. But reads the local DVD...

  (* 2) a few times it can write DVD but most of the time this is not not writing DVD Nero 7 display of 100%, but the DVD is not written anything.*

  I use Vista drivers for my Window 7 operating system...

  3. should I install windows 7 drivers... ?

  4. are there specific drivers for DVD player. ?

  Experts or those who have recovered from the same problem. Please help me.

  Thanks in advance.

  Hello

  Maybe your CD/DVD drive becomes faulty... What do you think?

  But before you think to a new disk, you must remove the server - and lowerfilters in the registry. You can follow the workaround from Microsoft:
  http://support.Microsoft.com/kb/314060

  Also, make sure that the CD/DVD drive lens is clean. You can use a microfibre cloth to clean. This rag doesn't scratch the lens.
  Check this box!

  Finally and above all, there is no special driver for CD/DVD drive. It s a part of t Windows and can be updated.