Satellite M30X: DVD/CD rom drive does not work

Hello
I hope someone can help. The reader above will not now recognize any media inserted. He snores for awhile then stops. I cleaned the lens and cross also support and diagnostic tests and they cannot me more help.

I also reinstalled the driver but no joy.
This means a new DVD/cd drive is necessary?
It is removable of the laptop and easily replaceable?
Where I would get the part - M * a DVD ROM UJ-82OS?

How much would it cost?

Thank you all for your suggestions?

Jim

This looks like a simple material defect
So what is the solution? I do think that a replacement device

I think that different readers are compatible with this laptop. So I can t give you and advice how much it costs but the best answer you'll get the Toshiba service partner in your country

But the slim laptop drives are usually a little more expensive than shared drives for desktop computers

Tags: Toshiba

Similar Questions

  • Satellite M30X-165: new HARD drive does not work

    Hi, I want to replace the old hard drive, HITACHI 80 GB in my Satellite M30X 165. I bought SEAGATE Momentus 5400.3 120GB but it seems that it may not be recognized by the BIOS. Anyone know what to do or what types of discs can be used in this notebook? Thanks for help.

    Hello

    Sometimes a bios update has solved many issues about installing new hardware.

    BUT Please note: the Bios has a limitation of size of HARD drive support. Not all sizes are supported. I guess that the 120 GB are too big and therefore you can not use it!

    You must switch to a smaller size. Check with a 80 or 100 GB HARD drive

    See you soon

  • Satellite Pro A120: DVD/CD-RW drive does not work

    Hello: the dvd/CD-RW drive does not work. apparently it has been disabled somehow! Any ideas on how I can turn it back on?

    Have you tried the Device Manager and it says it works normally!

    Any ideas please?

    Thanks :)

    > apparently it has been disabled somehow
    I put t think that the disc has been disabled!

    How someone or something should turn off the drive? You have disabled the drive? I don't think so!

    You said that the drive appears in Device Manager. So I guess that the drive is enabled and is recognized by the OS.
    You are getting error messages or what's wrong?

    Perhaps the reader can read or burn CDs or DVDs.
    This happens if the lens of the drive cannot calibrate properly and can not handle the inserted media.

    Maybe the replacement drive is required!

  • External Combo CD-RW/DVD-ROM drive does not work with USB 1.1

    Hello world

    I have a problem with the PA3352E - 2 CD 2 CD-RW/DVD COMBO USB 2.0. A colleague is owner of this car and use it on a NB DellC610 with Windows XP on it. The problem is that the drive does not work with this type of nb (with a NB from Fujitsu-Siemens newest there no problems); There is always an error message about "surge." I think it has to do with the USB 1.1 because the player seems to be built for USB2.0. Is it possible to use this drive correctly with usb1.1 (ok, the flow is low, but more important is it works in general)? Unfortunately his nb will not work with USB 2.0...

    Thank you very much in advance.

    Kind regards
    Steffen Rieger

    Hello

    AFAIK this external must have a power adapter. You use it too? I'm not 100% sure, but there are difference how much power Gets the USB slot. Toshiba notebooks is around 500 my and some producers another laptops send between 300 and 500 my. The external device requires approximately 700 my.

  • CD-ROM/DVD-ROM drive does not work. Device Manager indicates problem and there is no volume listed on the Volumes, how to fix tab?

    Description of the drive is HL-DT-STDVD +-RW GSA - T11N ATA Device Properties. Verified drivers and they are up to date.  Under device status "this device cannot start. (Code 10) clicked on search the Solutions, but no solutions are shown.  Have trouble with the DVD because I had the computer and have had several conversations with Dell but I think that my extended warranty just expired.

    Hello

    Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
    http://support.Microsoft.com/kb/943104/

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

  • Satellite A300-1NO: super multi drive does not work

    Hello again.

    I have a big problem (as every day since I have this laptop).
    My DVD multi writer rarely does not work.

    When my system starts up, it works very well, and he can read everything, no problem.
    But after several hours, it is simply not open.

    The orange LED flashes for a second, but do not open it.
    When I restart my sytem, everything works well again... What do I do? It is so boring.

    It's on my desktop, I do not...

    Hello

    If the CD/DVD drive is not ejected automatically by pressing the button and then try to open it manually using a small thin object. Insert it into the tiny hole near CD. Diving DVD eject button.
    This should allow you to open the ODD.

    But if it will always happen, then I recommend you contact the ASP in your country in order to verify this CURIOUS.
    Maybe the drive needs to be replaced

  • Satellite L40 - 139 - CD-ROM drive does not

    My CD drive does not appear in my computer and when I use the Device Manager I see a yellow box with an exclamation point get this message when I go to its properties
    Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)

    -What this means and how can it be solved?

    I think this question has been asked 100 times in the last two months and you can find the answer in two minutes only by using advanced search option.

    But once again for you - http://aps2.toshiba-tro.de/kb0/FAQ8101LA0000R01.htm

    Good luck!

  • Re: Satellite A200-1Mes: XP audio driver does not work

    Hello
    I have a problem with my audio driver (I use windows XP). I installed all the drivers xp and still does not work.
    Can someone tell me where to find a driver?
    Thank you.

    I hope that you are using Windows XP SP2 home edition. Anyway check it please this thread. Try using the instruction given by Eldorado.

  • Satellite M30X-129: card SD2 BT does not work

    I can't get my SD2 BT working on my satellite M30X-129, I get Bluetooth is not ready when trying to make a connection, I'm not sure if it's to do with the SD card drivers or... any ideas please

    Hello

    As far as I know there should be a CD that was shipped with this card.
    There you should find the drivers for this card. If the drivers on the CD don t work then try to update with the latest version.
    For this, you can check this site:
    http://APS.toshiba-tro.de/Bluetooth/

  • My dvd/cd rom drive does not open

    I looked for mechanical problems, I've updated the driver, I tried manually open (press the Open button), I tried to use the computer to open, but all without success. This has happened as my computer starts does not sometimes after it has been switched off.

    Hello

    Try using a tip of a paper clip to open the tray.

    "How to create a trombone in car opener.

    http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm

    "CD-ROM, DVD or other drawer not open."

    http://www.computerhope.com/issues/ch000214.htm

    See you soon.

  • Adding a new dvd/CD-RW drive does not work on my PC 4600

    Hi, my laptop comes with a standard cd-rom drive and I bought a dvd/CD-RW drive to replace. When I enter it it appears power because I can open the drawer and the light comes on when I turn on the computer. However it is not coming in my computer.
    I tried several disks so that the player I use is not defective.

    can someone please help me with what I need the dvd function on my laptop for my work.

    Thank you very much

    Tommy

    Hello

    New device is recognized by the OS? Can you use it at all? Is there an error message or is defrost just marked in Device Manager?

  • Satellite L50-B-281 - WiFi Driver does not work

    Hello world

    I have a problem that I can not find a solution

    I bought a L50-B-81, without BONES, because I have a free license of W7.

    I used the Driver download for Toshiba to look for the drivers.

    For my model (PSKTCE), I got two drivers for Broadcom and Aatheros one.

    The Broadcom Installer did nothing so I guess, I don't have hardware Broadcom.
    The only installed Atheros Bluetooth driver.

    Is there an easy way to determine what hardware is inside?

    Device Manager, where the works is not the devices are marked by this triangle warning sign, said he does not know the manufacturer.

    Thank you very much
    haegarhorrib

    I bought a L50-B-81, without BONES, because I have a free license of W7.

    The L50-B-81 Satellite is not known to me... I guess you get the model number... Could you double check your model number and share the good name with us?

  • Satellite A210-ST0 - wireless LAN driver does not work

    I recently reformatted my laptop with windows XP, and I have all the drivers working except the wireless Lan driver.
    I got the driver from the toshiba page and this is the XP driver. I install it, but the computer still does not recognize that the map has a pilot (appears as a question mark in the Device Manager) does anyone else have this problem? is there another place to get the driver?

    PS: I'm pretty good with computers, I just need the driver file and can installed with on an EXE file

    Hmm

    What page of the driver Toshiba did you use for the download of the driver?

    As I m not wrong not the * Satellite A210 - ST0 PSAFGC * is a Canadian series and therefore, it would be desirable to use the Canadian page for the download of the driver!

    Check this box:
    http://support.Toshiba.ca/support/download/ln_byModel.asp

    The WLan card chip could come from Realtek or Atheros.

    Last but not least, you should check your BIOS version. If the latest version is available on the Canadian page and then try to update!

    Good luck

  • Satellite M30X S214: CD button control does not work

    I have a Satellite M30x S214 and I do not have the drivers for the CD-DVD button control.
    Please I need the drivers CD control button.

    someone help me?

    Have a look here:
    http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

    and reinstall the utility called Easy Button.

    concerning

  • CD rom drive does not work and does not appear.

    My cd rom drive not only disappeared from "my computer", it's also not read what I put in. When I find under device manager and open it it shows nothing in the drive. I ran a Microsoft Web site diagnostic test and he said: she could not solve the problem and has only offered no other information. My drive is NEC DVD + RW ND - 6650A

    Hello

    Please refer to the link below regarding CD/DVD players missing. :-)

    http://support.Microsoft.com/kb/982116

Maybe you are looking for

  • Where buy keyboard for Satellite series laptop

    Hello After a bit of searching on Google I found a few places where to buy a replacement keyboard for my computer laptop satellite but would like to know if anyone know of a good place to buy a. Thank you very muchRaoul

  • 5 s screen white iPhone?

    Hi all (32 gb, iPhone 5 s after the warranty, protected with Mophie juice more, intact screen, OS update status unknown) Was checking my emails as always when I clicked through an Amazon site it seem'd to fight a small display of an image from the br

  • Problem adding SAS HD TS430

    I have a new TS430 I'm trying to set up with 2 cool 67Y2617 SAS 450 HD I finally want one for primary school and use a backup to SLES 11. I had a hard drive of 500 GB WD 'test' that acknowledged the BIOS and I configured for SLES 11. Now, I bought ne

  • File sharing between two computers at home

    How can I set up my laptop on Vista with my PC running Vista so I can see the computers document files?

  • Virtual XP mode under WIN7

    I have virtual XP in WIN7 that worked very well in the last 5 years. Recently installed iolo system shiled on it, and as I see not the START menu. XP arrives in the small window with no option to resize. I have WindowsXPMode_en-we and Windows6. 1 - K