Satellite M30X graphics card does not work correctly
The best I can describe the problem is that the display looks like he has a trellis in front of her.
I connected a remote screen I know works fine and the problem is the same, so I'm sure that the problem is not the LCD display itself.
Looks a bit like a screen of matrix of the film of the same name. I also tried to replace the motherboard, but the problem remains.
The laptop itself works very well and always does everything its supposed to but the screen make it practically impossible to read.
Unfortunately, it's really not easy to say what could be bad exactly.
Maybe it's a problem of graphics card chip.
According to your description this fault could be possible.
Most of the time it s advisable to ask and laptop for an audit technician. He could run a diagnostic test and could locate the hardware failure more quickly.
Sorry, but that's all I can suggest.
I have a Satellite Pro 6100 (PS610E - 02c 60-GR) 1.7 Ghz, 256 MB, 40 GB, 15XT and a Geforce4 420 Go (32 MB) graphic card. Until yesterday it was working properly. Now, there are colors on the screen and there was a blue screen a few times, which says something about my graphics card (it disappeared from fast read).
I uninstalled the old driver and reinstalled twice. Nothing has changed. Also I tried with an external monitor, but there wasn't any change, too.
Now my questions:
1. is it possible to change the graphics card (in particular, can I do it alone without a technician)?
2. How can I do this, is there some tutorials, especially for my laptop?
3. an another Geforce4, but for example a Geforce4 440 Go with 64 MB of RAM would fit in my notebook?
I thank very you much in advance!
The led flashes as it provides a microcode error!
This is especially if the malfunction of hardware has been detected.
I presume that the replacement of the graphics card is the reason!
As in previous discussions suggested the replacement of the graphics card is NOT possible. You don't believe!
Looks like that the BIOS cannot handle this new graphics chip.
Does not my graphics ati mobility radeon hd 3470, only the blue colour works on it and the display of the laptop is not working too, I need to plug a monitor so that I can work with it? Can I replace it? If so where can I buy a graphics card for?
If you also have a problem with an external monitor, there seems to be a problem with the internal graphics card
Did you notice the same problem when you get into the BIOS?
As Akuma writes you can contact a service provider authorized in your country. Guys are able to replace graphic card/motherboard for you.
The list of aspic, you can find here:
http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.
I have a Satellite XC 250895 Q. Windows 8 keeps giving me a message that my graphics card does not work correctly.
I go to the Radeon website and click on the appropriate boxes and let Radeon check my system to see if the drivers are up to date. He tells me that I have to download something (?) New driver) but when I do it tells me there is a problem with the compatibility with my system.
I haven't noticed any problem with the graphics.
It may be a Radeon problem, but what I have on my system, which was installed at the factory.
Thanks for everything back
+ The message was edited: model nr. Add the object +.
Can you please tell us once more what model of laptop you have exactly?
Are you using the original Win8 preinstalled?
I got my 2 new p850-133 and they have reinstalled with a new copy of Windows 7, and then the extended graphics card does not work, he said: "code 10" failed to start, what to do, the hd4000 intel integrated works really well.
The laptop is equipped with a GPU NVIDIA® GeForce® GT630M.
The European driver Toshiba page provides 3 different display drivers.
2 drivers for nVidia GPU (v296.0 for the 3D and v296.01) and one for Intel (v 22.214.171.12412).
You must install the Intel driver and one of the nVidia drivers.
My 740 gforce graphics card does not work in my HP Pavilion HPE h8-1205, please help
Supaman4040, welcome to the forum.
I think that your problem is related to the BIOS. The 700 series video cards require UEFI in the motherboard instead of a standard BIOS. HP didn't start using UEFI in its motherboards up to mid-October 2012. Your computer was released January 25, 2012. You must contact the card manufacturer to see if they have a VBIOS update which will allow the card to work with your computer.
Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.
as say the title my nvidia graphics card does not work when I install microsoft visual studio 2013
How can I stop this from happening
We know what to do?
Yes and Yes, but it's good for now
I restore the Windows STILL and installation of visual studio without emulator windows 8.1 phone
and it worked
Thanks for the reply.
My new laptop Toshiba M200 (works on Vista) continues to display an error message that my Flash card does not work and that the system is looking for solutions.
Other threads in this forum, I understand it could be a driver problem, but there seems to be no suitable driver available for download for my M200 model.
Who can help me?
When you reference the Flash card, I assume you mean the utility toshiba Flash Cards. in this case, I would say that you reinstall (i.e., uninstall and then reinstall) relevant Toshiba Value added Package for your laptop model. to locate the relevant Toshiba VAP, visit your regional toshiba driver. This should solve your problem, such as cards Flash requires the installation of files for your Fn + F keys (for example by pressing Fn + F6/F7 fades and lights up the screen), so I think that Vista is looking for solutions as the Fn keys could be involved. After installation, you can disable the startup Flash cards when the computer starts up, but do not uninstall the toshiba VAP.
This should help your question
I bought a Radeon 7970 visintek 3 GB graphic card thinking that it works with my xps 8300. It fits everything is plugged in correctly, but when I turn on my computer does not recognize the graphics card? The graphics card is not broken I build it in another computer and it works perfectly. I am very disappointed at this because I thoughtI would save money, do not buy a new computer and just buy the food and the radeon. It turns out that the Radeon does not work. If someone could tell me what the problem is, that would be greatly appreciated.
Thank you, Jon
A 500W (or more) power with a 150W power connector 8 pin PCI Express and a connector power 75W 6-pin PCI Express is recommended for the graphics card AMD Radeon 7970. Your XPS 8300 has a diet of 460W. This maybe one of the reasons for the question from the video card works on another computer.
Please see the link below for the requirements for the graphics card of Radeo 7970:
The following video cards are compatible with the Dell XPS 8300.
Discreet (PCI Express x 16 card) - NVIDIA GTX460, NVIDIA GT420 (M207)
ATI Mobility Radeon HD 5670/HD 5770 / HD 5870/HD 5450
When you click the compatibility Option in the link below, you will see that the XPS 8300 is not listed under supported for the video card Visiontek AMD Radeon 7970 systems.
Hope that the information provided above is useful. Answer please if you have other queries.
Thank you and best regards,
For easy access to the drivers, manuals and updates, please visit our Support Site .
My Satellite M30X-129 was working well until I reinstalled the operating system.
Since then, the Microphone does NOT work. I installed the audio drivers from the CD utilities & tools, but it does not work.
Can anyone help?
Sorry, but I must ask you something. You speak internal microphone or external?
I have the Hp DV6-3085tx computer laptop with windows 7 64 bit. Once while working the display on the screen disappeared suddenly and restarted, then leave ATI Mobility Graphics Card(512mb) does not work. To troubleshoot it show Windows has stopped the operation of the graphics card (Code 43). I repeated it, still problem remains unresolved. What should I do?
Code 43 - one of the motors controlling the unit notified the operating system that the device has failed somehow.
Use your warranty and get in touch with HP to inform them of this problem. How all the information here (just choose your country).
PSAY3A - 02q 001. Laptop is around the age of 20 months. Turned on this afternoon and the Wireless does not work. Atheros AR9002WB-1NG. Can't b on / off switch material. The switch will beep when pushed. Network troubleshooting indicates the card is not activated. Card is always detected in windows.
I feel that this indicates that the card has failed. Any thoughts?
was soon Simon
> Card is always detected in windows.
Does that mean exactly?
WLan is listed in Device Manager?
And if SO, have you tried reinstalling the WLan driver again?
If you tried that, do it!
Uninstall the Wlan driver (in Device Manager), download the latest driver WLan driver Toshiba page, install the driver, reboot the laptop and try to set up the connection.
Hey guys, my pc won't start when I install 980 GeForce gtx sc it is a blue HP screen then frozen and I hear glances inside the pc, I tried to rest the bios it does not work, I pressed f12, this isn't working, I changed the power not to provide to 500 wats still no response I tried everything
CPU i7 intel 3.40
16 G RAM
HD 2 t
A version of HP 8 BIOS is not available for your PC. You will need to get a graphics inherited as a NVIDIA GTX 4xx, 5xx or 6xx. The NVIDIA GTX 660 TI is your best choice. I suggest you also improve the power supply to a 600-650 watt as the Corsair CX600 or CS650m model.
My CD ROM is not working properly because the drivers corrupt. I tried uninstalling etc. How to load new drivers or even reformat from the recovery disk when the CD-ROM drive does not work?
Looks like catch 22. Someone at - it help him?
I agree with Maurice. If the drive can read a recovery media or any other bootable media there must be a hardware problem and I assume that the optical disk drive is defective.
About a month ago, I spilled pepsi on my laptop and had sent for repair. I came home today and he had a new keyboard installed, among other things. But the new keyboard does not work properly.
A bunch of key type is close to letters instead. For example, type 'a' gives 'aq1', 'b' gives 'bgt '. It seems to type the letters vertically above. Some work very well.
Is the new defective keyboard, or is it need calibrated or something? My laptop model is L500-19 X.
My advice: don't waste your time on the forum waiting for help. How do give you the right answer to your questions?
I have only one answer to your question: no, keyboard doesn t need to be calibrated.
Contact the service provider as soon as possible and ask for help.
Maybe you are looking for
Hey everybody! I have the following problem: I bought Tecra M9 PTM91E. After a year of successful use of the laptop, something happened with my video card or the motherboard.He has been replaced in the service guarantee, but after that the cooler beg
I applied a mast of form to a video and when I add keyframes to make it move in the clip, do it with gentleness keyframes (movement starts slow, speeds up, slow ends). However, I need the linear keyframes (I am tracking an object moving at a constant
How do to stop the demo for Sony KLV - 32R412B.can u please help me
at home, I always leave my tx2 plugged into the charger a/c, and it is almost always in standby mode. When I take it on the road for work, I of course unplug and take with me (always in standby mode). When I get a job, I'm going to turn it back on (o
Hello I have a Windows 7 64 bit Pro its own. installation on my t410s 2904 FYG (no driver no additional software-> windows only). The pilot 126.96.36.19955 / 188.8.131.52 (NVIDIA Display Driver for Windows 7 (64 bit) - ThinkPad T410s (switchable graphic mod