Satellite M30X: Screen doesn't work after sleep mode

Similar Questions

• Re: Satellite A50 - keyboard doesn't work after sleep

  I have a problem with my laptop.
  When you load windows xp keyboard does not work.
  Keyboard works again if you put it to sleep the laptop and then you reboot.

  What is the problem? Help me please and thanks in advance.

  I have never heard of this issue, but have you tried an external keyboard? Check it!

  What's your Windows up-to-date with all Service Packs and patches?
  I doubt that s a hardware issue and in the worst case, you must reinstall.

• Satellite Pro M70-275: screen doesn't work after waking up from hibernation.

  Hello

  I sometimes encounter this problem: when starting the hibernation (not sure of the English term, although that. "light sleep" mode in WinXP...) the screen turns on again. The operating system seems to be up and running again, but I really don't know because I do not...
  Sometimes it works fine, but I would like that it works all the time.

  Any ideas?

  / Johannes Ogren
  Gothenburg, Sweden

  Hello

  Will there be the same situation after waking from sleep mode?

  James is right. Usually, this kind of questions is fixed with the new version of the BIOS, but you can also try installing the latest version of Power saver utility.

  If anything maybe you must reinstall the OS using supplied recovery DVDs.

• Dictation doesn't work after sleep

  Hello

  I have a macbook pro retina early 2015 version running on El Capitan OS X (10.11.4).

  Recently, I started using the dictation feature & speech and found that it will not work after waking from sleep (most of the time that I do not close).

  When I press the shortcut key to activate the dictation, the microphone at the corner will 'three-treatment-points', is therefore the microphone icon in the status bar (I know that my microphone works well btw). When I click it, the drop-down list says that "dictation is loading. However, after some time, he will answer and I have to force the function to stop smoking. Just after the dictation in the activity monitor to quit or off in system preferences, my mac will freeze permanently for 1 ~ 2 seconds, forcing me to restart my mac.

  I have went to the console and found the newspaper stating:

  SpeechDataInstallerd [2286]: *-[NSKeyedUnarchiver initForReadingWithData:]: data are empty. If you forgot to send - finishEncoding to the NSKeyedArchiver?

  Wandering if there any kind souls out there who can solve my problem of coding or just save me to restart my mac every time?

  Thank you!

  I use increased dictation. When I finished with the dictation, I deliberately left it. My Mac closes every day at sunset. With OS X and OS X 10.11.4 10.11.5, I have no problems with the dictation, other than his words of misunderstanding sometimes. Dictation is not ready to receive your speech until the three points "pulsed" stop, a sensitive vocal mic icon is present. I have never error messages, or this Console log entry that offered you.

• Satellite A300 - screen doesn't work sometimes

  OK so first of all, I wish to begin by saying that I am a complete noob when it comes to computers and also my native language isn't English, but I'll try my best to make you understand my problem.

  Sometimes, when I try to turn on my laptop, the screen will not work. I hear the fan turns, the little lights on the keyboard light up, but the screen remains black... what happened for like 3 days until today, I came home and it worked magically. It is this same as there is a month... What is happening? : s

  On this virtual path, it is not easy to offer the exact diagnosis.
  What we do here is nothing else possible speculations about the reasons.

  A300 is not the most recent model, so there may be a problem with the connection between the motherboard and the display.
  Next time when this happens, try to move the screen or gently press the laptop under the screen just to see if this will help or not.

  In the end, I must say that single service can help you with this. With other words, they can disassemble the laptop and check the display cable.

• Sound stops working after sleep mode in Windows 7

  I just installed Windows 7, map its Xonar HDAV 1.3 Slim, ASUS M4a78 Pro motherboard with processor image ASUS.  Works fine until it goes into sleep mode.  When he wakes up, the sound does not work.  When I test different devices, the sound bar saves the output, but no sound appears.  Update BIOS and drivers and that didn't help.  All system sounds and sounds MCE or anything like that do not work until I restart.  I saw the patches for this problem in Vista, but it will not yet install in my computer because I have Windows 7.  Thanks for any help!

  Install the latest Windows 7 compatible sound and display drivers.

  New user, see:
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  All the best!

• 15 - ab004nc: HP Pavilion 15 (15-ab004nc) - 3160 Intel doesn't work after sleep

  Hello.

  I have laptop HP Pavilion 15 (15-ab004nc) with the card wireless Intel 3160 and running 10 x 64 windows.

  Whenever I put my laptop to sleep, then wake it up, the wireless is dead. There is the Red Cross at the bottom right on the network card and a Wi - Fi connection can not be turned on.

  I tried solutions:

  (1) properties - wireless adapter - device manager - power control - uncheck the box 'allow the computer disable this device... ". »

  (2) remove the current driver (auto downloaded by Windows 10) and install the driver of HP (http://ftp.hp.com/pub/softpaq/sp72001-72500/sp72159.exe) drivers site

  (3) remove this driver and replace it with the driver from the installation site with drivers for Intel 3160.

  (4) maximum - wireless - performance even on battery power options

  (5) remove all the network related drivers in safe mode, reboot and installation driver HP for this laptop (identical from the point 2)

  The laptop is useless in this State.

  When I wake up from sleep/hibernate, wifi can not be activated. I tried to disable and re-enable it in Device Manager, but it does not help either, the wireless adapter is dead until I restart the system. After starting, the wifi works like a charm until the next sleep/hybernation, then it died again.

  Any kind of help would be great.

  After one stop wireless I have let it run as a windows network tool diagnoses and he told me that the switching between wifi and no.-wifi button was "no wifi".

  The funny part is that this model of HP laptop is not a switch wireless button, only to airplane mode, and is not the same thing.

  If I have the system is quite confused and this is probably the problem with keyboard, turns out I was right.

  I installed the driver of HP wireless button (even if there is NO button on the device wireless switch) and now everything works as it should.

  TL; Dr: install the driver of HP Wireless button and everything works fine.

• Satellite U500 - refresh doesn't work after copying a file

  Hello

  I have a little problem with my Satellite U500.
  If I copy a file somewhere, he sometimes goes there, but sometimes when I copy the file lets say office, then the file is not visible there. I have to update every now and then to be able to see it there.

  Jaso444

  Hi Jaso444,

  What OS do you have exactly?
  It happens when you copy a file with Windows Explorer or another program?

  Sometimes I also noticed this problem but I think it s normal behavior. In this case, I press F5 (refresh) and everything is ok.

• Display MX30 satellite will not work after sleep or resume - SOLUTION implementation

  Below I give an answer to this question asked by Eddy_Stock in 2006. I would like to thank and can't get in touch with.
  HIS answer is below and I hope it helps someone who has the same problem... wow... cured!

  Re: Satellite M30X: screen doesn't work after sleep mode

  I had the same problem with a satellite A100. I did the following:

  1. go in Control Panel
  2. in the system select Classic view
  3. go to the Hardware tab
  4. Select Device Manager
  5. open the 'USB bus controllers' (via)
  6 double-click on USB root hub
  7. Select the tab: "Power management."
  8 deselection allow the computer to turn off this device to save power
  9. my computer has several USB root hub. I repeated at 07:54 for all
  10. I rebooted the computer, but do not know if this is necessary.

  After that, the problem was gone. Enjoy

  Thanks for sharing this info with us

  I think that you thread and the solution could help other users with similar problems

  Thanks again

• Satellite Pro A300 - after sleep mode the mouse no longer works

  Hi all

  Hope you can help me with this problem because I believe that I have tried everything I know and my next step is really formatting all the computer again and again without knowing if it will work this time, because that's what I just did, during the upgrade to win 7.

  I have 2 problems:

  When the computer goes into sleep mode and I start it backup - the mouse stops working, unless I have move to another usb port. I get a message on usb can run faster...

  Another problem is a program of freezing at this point as well, this program is Oracle JDeveloper, don't know if that has to do any?

  I tried to update ALL the drivers of toshibas webpage - these problems still...

  Help, please!

  Would rather not format again...!

  Christian

  Hello

  Can you please tell us which version of Windows 7, you have installed? I mean if you have 32-bit or 64-bit.

  Is it just that you use an external mouse?
  The touchpad works after sleep mode? If so I think that it s something wrong with the external mouse maybe.

  By the way: make sure that you use the latest version of the BIOS. You can find it on the page of Toshiba.

  And as for the question of the Oracle, I think you should communicate directly with Oracle support. ;)

• Mailto doesn't work after updating FF 42.0

  Mailto doesn't work after my last update. The entrance of mailto is not under Tools > Applications and there is no drop-down list to add an entry. My default e-mail program is Windows Live mail.

  Hmm, mailto certainly should not be missed.

  Sometimes, the file that stores these actions of the Manager/download application is damaged. As it is difficult to change, when there is a problem, we offer usually when you rename the file and allows Firefox to rebuild the Windows registry. Who cannot help if mailto is missing from the registry, but I think it's worth a try:

  Open the settings folder (AKA Firefox profile) current Firefox help

  • button "3-bar" menu > "?" button > troubleshooting information
  • (menu bar) Help > troubleshooting information
  • type or paste everything: in the address bar and press Enter

  In the first table of the page, click on the view file"" button. This should launch a new window that lists the various files and folders in Windows Explorer.

  Leave this window open, switch back to Firefox and output, either:

  • "3-bar" menu button > button "power".
  • (menu bar) File > Exit

  Break while Firefox finishing his cleaning, then rename the mimeTypes.rdf to mimeTypes.old (or another name of your choice, in the case where you decide to roll back this experience).

  Launch Firefox back up again and return to the Options page to specify your preference. Mailto appears once more?

• ASUS laptop computer: touch screen does not work after update of windows 10

  My touch screen does not work after update of windows 10 in Chrome. How can I fix it?

  Hello

  Welcome to the HP support forum. Asus and Chrome are not HP, touch screen works on my machine HP with IE, Firefox and the new browser Windows 10 called Edge. I think that you need to update to Chrome.

  Kind regards.

• Satellite A100 - screen has stopped working

  Hello

  yesterday in vista, he said that he detected an external monitor, even if I never used any external monitor to my laptop. In display properties, he said I had several monitors and in Device Manager it says that I had a pnp and a monitor not Plug-and-Play...

  The screen has stopped working after a reboot. I see nothing on the screen during the loading process indicating normally the toshiba and the vista loading screen. But once vista has started (the sound still works), the screen works again.

  This has me worried and I reinstalled vista from the cd, but now the screen never... never.
  But I know that vista has been correctly installed that after what he asked, can I still use alt + f4 and enter to stop.

  Well, I can't even make troubleshooting procedures on my own that never, the screen now works. -.-
  Does anyone have experience with this?

  Hello

  I've never heard of such question it s so very interesting to hear about this issue. Given that you never connected an external monitor, it must be something else...
  Did you ever done some update the BIOS on this machine?

  Maybe, if you have some, this could be the problem. Otherwise, I have a work around (it could be useful):

  Remove the AC adapter and the battery from the machine and leave the machine for some time (1-2 hours). Then, start the machine and check if it works.

  If this isn't the case, then you must send your machine to the service since it could be a serious hardware problem (I mean if you really reinstalled vista and problems persist after the reinstallation, then it IS definitely a hardware problem).

  You can also try some update BIOS if it is not already done...

  Welcome them

• DVD player doesn't work after installing SP3 for Windows XP.

  DVD player doesn't work after installing SP3 for Windows XP. That it disappeared from "MY COMPUTER". Device Manager sees it, but there's a yellow exclamation mark over it. See the BIOS of the motherboard and it still works in the BACK. I know SP3 is a collection of updates, but I'm not sure that is my problem. I suspect it's one of the more recent cause I have Windows automatic updates is turned on. Thank you.

  Hello Superhornet142,

  Thank you for your message.  Click HERE and run the FixIt!  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.