Satellite M35: How to open my DVD player free region one?

Dear Sir
I have toshiba satellite m35 series & while I use my dvd to watch movies it ask me several times to change the region & I don't have it a limmet. now it is blocked. If it please tell me how I can open it & keep it region free?
Thank you for your help

Hello

Unfortunately, it was possible to change the free parameters of the region 5 times. After this change, the settings are locked. It is not possible to make the region free drive new ;(

Tags: Toshiba

Similar Questions

  • Satellite C855 - 19 k how to open the DVD player?

    How can I open the DVD player?
    Cannot find a symbol of the keyboard representing the eject option.

    Thank you.

    Hello

    Do you mean the CD / DVD drive?
    The optical disk drive is placed on the left side and there should be an eject button.
    Have you checked it properly?

  • Satellite 5200 how to replace different dvd player

    Hello
    Many users seem to have problems with the Matsu * a readers in this model. I wanted to replace my dysfunctional Matsu * dvd uj 810 and the nearest player, I found in stores is a uj 830 with coverage set up perfectly. However, it is not recognized by the system and I have susptect I need to change some settings such as master slave settings that I can not, because there seems to be no fully accesably installed BIOS.
    What is never replaced anyone this drive with one more current?
    Thank you
    Andrew

    Hello

    As much as I know all CD or DVD in Toshiba laptops are pre-set to be a slave. HARD drive is preset to be master.

    Please keep in mind that all CD or DVD devices may not work correctly with all Toshiba laptops and before that you want to change any hardware component to pick up some information service partner.

    Good bye

  • How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

    Separated from this thread.

    Hello

    Thanks for the reply, I clicked on the link and it shows windows...

    Here I can not open the widows of anywhere.

    How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

    MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

    He always goes to startup repair

    then he said not being able to correct automatically

    Under system recovery option what can I do?

    I don't want to go back to the point of origin of the memory (factory settings)

    Thank you

    Patrick

    Hello

    Have you tried using SafeMode w/command invites to perform a system restore?

    1. Press the power button to turn on the computer.
    2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
    3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
    4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
    5. Follow the on-screen instructions to perform a system restore.

    You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

    Using Microsoft System Restore (Windows Vista)

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

    You also have the option to create a backup of your files when you perform a recovery

    http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

  • How to open windows media player?

    How to open windows media player?  I don't know where to look or how to find it.

    How to open windows media player?  I don't know where to look or how to find it.

    2 ways:

    1. start > in the search box, type windows media player > press the Enter key.

    2. start > coulm left, click on all programs > scroll to find Windows Media Player.

  • How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

    How to export a video with two audio tracks such as: English and a steam engine, then open in vlc player, then select one of the two tracks?

    Everything you always wanted to know about the acoustics in first Pro CC - YouTube

  • Satellite P300 - how to open a stuck DVD player?

    The DVD on my Satellite P300 drive just decided that she does not want to open. I tried to use a paper clip in the small hole next to the button, but that does not work either. The LED on the drive just flashes.

    Someone at - it other ideas.

    Thank you

    Ron

    Hey Buddy,

    Normally on every CD/DVD player there is a small button of relief that you can open the player with a small paper clip even the CD/DVD isn't working or the normal eject button. If you use the emergency eject button the drive opens and you can remove the CD or DVD.

    Also, check the user manual. I found this inside information. ;)

  • Satellite L - cannot access a Toshiba DVD player

    My laptop Satellite Pro L-series came with windows and upgrade to Win 7, which I am now running. I tried to read a disc that I burned on a comptuer spent, but tells me it's the wrong region (huh?) - my region is set to 4. So I gave up on it for the Nuncio and switched to the Toshiba DVD player.
    When I try to open it, I get a message that module (s) is / are missing. If the restart does not work, re - install the application.

    How can I do this?
    TIA

    Hi billym,.

    Normally, you can download a newer version from the official website of Toshiba DVD player if search you for downloads available for your laptop model:
    http://EU.computers.Toshiba-Europe.com

    But if you have a DVD with a different region code, you need to change the region code of your CD/DVD drive (Device Manager > properties of the CD/DVD drive).

    But don t forget that region code can be changed 4 times

  • Toshiba Satellite 5200 - how to open the case?

    Hello

    I have a Toshiba portable computer Satellite 5200 903.
    Here's my problem:

    My laptop is getting very hot, even it is idling. This is because the cooler got very dirty over time. And if the case/CPU-fan runs all the time, but no air comes out there.
    Now, I would open the case and clean the cooler. But for some reason, it is not possible. I removed all the screws in the back, in the Bay of battery and the hard drive Bay, but it's not working. So I think there must be some other screws, maybe next to the powerbutton on the top under a blanket. But I don't know how to remove this cover, without breaking.
    Or maybe I'm totally wrong and missed something else.
    I hope someone can help me.

    And sorry for my bad English.

    Thanks in advance.

    schlady

    Hello

    in my expierence the screws on each NB arranged differently and I would disadvice you open the NB to yours!

    In my opinion, it will be the best way to the NB to a Toshiba Service partner. They have the kowledge how to open each specific model and change the FAN!

    This will cost money, but you can be sure that it works after the check-up!

    You can find the following Service partner
    https://EU.computers.Toshiba-Europe.com - Support & download and find an authorized Service partner!

    Goodbye, Sam

  • DSX HP 16 - cannot open the DVD player

    Hi all

    I have a brand new HP DSX 16 and I am now setting up Vista and everything.

    I also bought a norton Internet Security 2009, so I was about to install it.

    Here is my story:

    1. I opened the box of Norton Internet Security 2009 to get the CD

    2 - I press the eject button on my laptop DVD player = nothing happens

    3 - I press the eject button which is above my keyboard. The mouse seems to be in the mode of "Hourglass" for 1 second and nothing happens

    4. I reboot and install all updates

    5. I searched google and this forum and found nothing

    6. I tried to push with a PIN to manually open the drive and nothing works. It seems that I can't push something to open.

    What should I do?

    EDIT: OK, problem seems to be fixed. I pushed harder with the PIN to manually open the drive. I was afraid to break something first! Now the work of eject button...

    Message edited by Etdashou on 02/09/2009 12:07

    Using a paper clip are you able to open the drive manually? The drive activity light flashes when accessing the drive?

  • Satellite Pro P100 - 465 Vista: of DVD player may be corrupted or missing (Code 39)

    I just bought a P100-465 pre-loaded with Vista Business, it was working fine and I managed to load the DVD player software.

    However, the second day of use, the DVD player has dropped off and in the device manager tells me that Windows cannot load the device driver, it may be corrupted or missing. (Code 39)

    When I check the details of the pilot, I have the last version loaded and Vista cannot find another update.

    This before with Vista on a Toshiba Qosmio. What is my dosage?

    Hello

    A question: why you n t use the option to search the forum to find discussions that could provide useful information?

    I used this option and found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

    You will find a link to the Microsoft page that explains the problem and a solution

  • Satellite P200 - can enhance the HD DVD player on a Blueray player?

    My laptop a P200. It has an internal HD DVD player. As this is a defunct standard can it be replaced with a blueray player? If so what model fit.

    TIA
    John

    Hello

    I doubt that this was not possible because I don t know all internal BlueRay players that are compatible with this laptop.

    However, if you'll be able to find a Blue Ray internal ODD and updated it so please come back and post the results.

    Welcome them

  • A satellite - not enough video memory for DVD player

    When executing my windvd Invtervideo player, I get an error message that says "Not enough MΘmoire for dvd player" which is the benchmark for this? also the sound experience of parts multimedia player dvd but no video Please help!

    Hi, mate

    you only post us a lot of information on your laptop. I can hardly believe that there is not enough memory to run it. What happens if you try to the CyberLink PowerDVD program. You can also try update video codecs. Download K-Lite Mega Codec Pack

  • Re: Satellite M30-107 - new compatible CD/DVD player

    Hello
    I need to find the DVD player that is suitable for my M30-107 sSatellite, can someone help me please?
    What is Teac dv-w22e?
    The original was Mat * a dvd - ram uj820s, but do not know where it would be possible to get it from...

    Thank you very much for your help!

    Hello

    (Page 4 to page 7) user manual contains information on the supported players!
    Looks like you didn't she check properly.
    This readers seems to be compatible:
    * UJDA750 *.
    * SD-R6012 *.
    * UJ-811 *.
    * DV-W22E *.

    You can find this number in google to get a...
    Otherwise, you may contact the ASP in your country for this player compatible

  • How to get a DVD player to play jpg files (pictures) engraved on DVD

    I have 2800 weird pictures (JPGs) coming to a little more than 4 GB. I have them numbered Filename (10001) and following, such as recommended on another thread on this site. Using of Windows on a new DVD burner laptop computer that is running Windows 7 and ensure that I selected the format of the ISO image before burning, I burned the files on DVD discs.

    I tried DVD + R and DVD-R, but my DVD player does not recognize them as DATA disks. When I go to the photo Navigation, it loads sometimes 3 pictures sometimes more, and then freezes.

    My DVD player is a Sony DVP-NS39 bought in May 2009 and fortunately displays photos (jpg) files burned toCD s, but also to play happily on the movies.

    Is a nice person out there able to tell me where I'm wrong?

    Thank you very much

    Barkwaypark

    +

    I downloaded the software (which looks just like the other burning programs, I tried - but I thank you for this kind) but always with the same result. Either way, it cannot be the number of files ' cos I tried with just a couple of hundreds and got the same result!

    I'll assume my Player DVD has a gremlin and try the disc on the drive of a friend in the next few days. Will let you know the results...

    Barkwaypark

    ====================================
    Well... I thought it was worth the try. You would certainly
    Think that a JPEG compatible DVD player would recognize JPEG
    photos.

    Perhaps the DVD player only works for individual photos
    When it is burned on a CD. Check your manual for the it
    may provide.

    Maybe a DVD must be a movie file. Maybe you could
    create a video slide show with DVD Maker. (I could be
    wrong, but I think someone told me that it was limited to 999
    photos)

    The DVD works in your computer's DVD drive?

    Let us know if find you a solution.

    Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

Maybe you are looking for

  • Portege Z930 - function key does not

    Hi, new to this forum. I have a laptop of z930 - 14 d Portege with 64 bit system with Intel Core i5-3437U processor and Windows 7 Professional. I used an external display until recently. When I stopped using it, I noticed that the function of the dis

  • can I upgrade directly from 10.10.2 to 10.10.5 in downloading and installing manually?

    update directly from 10.10.2 10.10.5

  • site Web de W450 do not sync

    Anyone having problems syncing their devices with the Web site. I went to run yesterday, appears on the said device is synchronized and is still not available on the Web site. It's very frustrating. I have tried wireless and cable sync and both say t

  • Network cards - "this device cannot start." (Code 10)

    I recently bought a new video card and in order to make it work, I got my BIOS and motherboard software updated (v9 to v20, a huge leap that I've apparently updated in 2012). After the update my new graphics card worked perfectly, but I ran into a pr

  • cannot copy and paste in windows 7

    I can't copy and paste to and from three different applications since the upgrade of Windows Vista 64 - Bit of Windows 7 (64-bit).  These features have worked in applications before the upgrade.  These applications are all WYSIWYG web design programs