Satellite M35 Pro - how to remove the screen bezel?
Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.
Can you please help me with this!
Thanks in advance!
Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
You could damage other parts that you know
You're stuck on the LCD mask?
As far as I know the LCD mask is covered by two screws that are hidden under the joints.
You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.
But note; Be careful, don't use any force!
I removed the two screws under the rubber covers on the lower left and lower right of the screen, but I'm still not able to easily remove the screen bezel my G575.
I try to be as gentle as possible to avoid snapping the plastic. Are there special techniques for this?
See you soon
Turns out that following the instructions for a G570 works very well.
There are detailed at the bottom of this page video:
Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?
My laptop was asked to enter the password when I put under tension.
Just check this article:
[How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]
As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.
So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)
I have problem with my laptop satellite. After the turn on I've got Announces s.m.a.r.t. disk is damaged.
I do not have it is why I do not know how to remove the old HDD and replace the new statement.
I will be grateful for the help.
Looking first for similar discussions in this forum? I guess that you didn t ;)
The advanced search option is very useful and you can search for single yarn that could help you.
I found this:
It seems that the hard drive on your A30 is in the optical drive, and you must remove all first the STRANGE before you get access to the HARD drive.
How to remove this screen
I tried disabling the debugger option in publication of flash CC settings. I always get this screen?
After unchecking the option of the debugger you republish your air application and then check the date of creation of the application you are testing?
Recently, I accidentally spilled juice my * Toshiba C850-178 * laptop keyboard and some keys are now sticky or difficult to press.
I would like to know how to clean sticky keys.
I've been looking for a way how to remove the keyboard, but I've not been successful.
Please help me.
You can ONLY remove the key caps.
The keyboard cannot be deleted.
Here are some interesting videos I found on youtube,
could someone please give me a hand on change/replace the optical drive on my Satellite Pro M30?
Alas, my drive is a DVD-ROM/CD-RW. I have another with the functionality of DVD burning (burner Super Multi of Matsu * a). I wonder how I could replace, because it is not possible to easily slide the bones?
To remove the optical drive, he can just remove the 2 screws that are placed at the bottom of the unit on the side of the road. Then you can simply drag the drive outward to disconnect the connector on the system board.
The player is placed in the plastic frame. You must therefore also this framework for a new disk.
Remove the plastic of the unit frame, only to remove 4 screws.
a girlfriend of mine got a Satellite P20 304 with Phoenix Bios.
She wanted that I remove the Bios password that must be entered directly after the Toshiba start screen.
So, I entered Bios with F2, went to security, entered the old password and press enter two times to a new blank password.
The Bios then showed that user password is not defined.
I saved the changes and started to laptop came out, and asked me again a password.
Now no entry (only press enter) or the old password works, still displays "wrong password".
What I did wrong?
I am a COMPUTER technician, but never had a problem like this.
This problem is related to the Bios Phoenix or Toshiba? And how to solve the problem?
Can anyone help? Would be fine, girlfriend needs urgent laptop.
Thanks for the comments!
I need to replace the hinges of the screen (well one of them anyway)
I have the manual maintenance and computer in bits.
The manual says "Disassemble the hinge (left) while drag and spin it.", but no matter how hard wiggle/slide/tour that I can't get out.
Same problem with one of the other side.
Someone has it already done this and have any advice or know of an educational video somewhere?
To my knowledge there is no textbooks that would show you how to disassemble the unit. Such dismantling manuals are made for the Toshiba service guys.
Then maybe you'll find some tips and tricks on YouTube or would need to contact a Toshiba technician to remove
I would like to remove the internal hard disk of 60 GB of my satellite P10 804 and replace it with a bigger drive, but cannot find a way to enter in the case of removing the HARD drive.
Does anyone have the details on how to do?
To my knowledge, the HARD drive must be placed under the optical dirve.
To remove the HARD drive, first remove the battery and the optical drive, and then follow the steps below:
1. remove the four black screws that anchor the shield of aluminum covering the HARD drive and pull it out.
2. gently pull on the HARD drive the front panel of the computer to disconnect the system board, then pull it out.
3. remove the four silver screws that attach the HARD drive to the HARD disk case.
But be careful. If you have no experience ask someone with more experience in these replacements.
My satellite u400-22z came with a big "hdd recovery" folder on the drive hard - yes I know what it does.
but the unbearably awful version of windows vista that came with the machine made me decide that, in the event of failure of the system, I'm still will not install this failure of the attempt of an operating system.
So I do not have these data recovery.
So those ~ 11 GB of junk sitting on my drive is bugging me, I can't delete the folder HDDRecovery, it is somehow protected against deletion.
How can I work around that?
Also, is it safe or can I make it safe, to use the small apparently hidden partition (that's recovery also?) I found, which is IIRC ~ 2 GB or larger, for own purposes, without destroying my current installation of windows?
Thanks in advance,
If you have a recovery disk and you do not want to store the folder in hard drive hard disk recovery, you can remove it.
> I can't remove the folder HDDRecovery, it is somehow protected against deletion.
Remove you it as you always do to remove all files on your system.
How can I locate, reset or remove the bios password of Toshiba Satellite C850-B79?
Unfortunately, the unknown BIOS password cannot be removed or deleted without additional assistance from authorized maker Toshiba.
The BIOS password is somehow the level of security that must be passed by an authorized person.
If you n t know this password, you will need to contact the service guy in your country to get removed.
I have a password for the Toshiba Satellite A110-260, but I can't reset the password of the battery
Please help me!
How to reset the bios password
You cannot remove the BIOS password. Something like that is not possible on Toshiba laptops.
A special procedure is required and this can be done ONLY by a (certified partner) ASP.
So my advice is to contact the ASP in your country and ask for help!
I try to set aside my laptop (satellite 5205-s505) today. But I found that the release latch was damaged somehow. What can I do?
My seriously damaged lcd. I have method to close the LCD to save energy (just use external moniter)?
This battery is a very good question. I think you're the first person who asked it.
If you cannot remove the only way is, I think, to disassemble the entire laptop and somehow free battery.
When you use the external monitor, you have to use the FN + F5 key combination and switch to an external monitor only. Portable computer's LCD will be OFF.
You can also check the Advanced display settings. Usually, you can also find settings to define where should be the office.
Check it out!
I have an Equium A210 I bought recently. I had what I thought was the correct card from my digital camera and placed it in the slot of the player card on the front of the laptop. The map is too small for the slot and now has to stay out of my reach inside my laptop. Any ideas on how I can pull this off my laptop without having to pay the cost of repairs.
Can I open up the laptop and he retire or is the reader of card memory one molded unit that I can't access.
Any help would be greatly appreciated!
Thank you very much
First of all I'm really putting t understand those who insert all compatible cards is NOT in the slot and don't check the properties of the slot.
You may damage the slot using a card is not compatible!
Why didn t consult the manual of the user who is always pre-installed on your laptop?
There are details on compatible cards.
However, I really put t know if you will be able to remove the inserted card, but perhaps you could use a tiny pair of tweezers
Notes; do not open Notepad. This would negate the warranty. The best solution is to ask the technician to mobile to help...
Maybe you are looking for
Today, I installed a card PCI-e intel 4965agn in port 1 of my laptop (dm4-1150ed), in replacement of the broadcom card which was in port 2. The computer does not recognize the card, it is not listed in Device Manager. Can someone help me get this car
Preinstalled HP compac presario cq 57, webcam windows 10 (from 7) missing, now have webcam 7 installed, not the same smaller image size and not the effects menu. How can I reinstall? NO TRACE SHOWN ON THE SEARCH, IS POSSIBLE FOR HP TO TAKE CONTROL OF
Please bear with me; I am an older woman trying to wrap my brain around some of the latest technologies. I'm quick to learn, but need a little coaching. I believe someone here can probably help me navigate my last challenge... and for this, I would h
Is it possible to get a print server for a LaserJet 1320 (essentially turning it into a 1320n)? Or is my only option to use an external print server?
Hello Sony. Sorry to be the bearer of bad news. I just tried to use the Sony RX100 MKii in the studio and found a problem. Simulation of exposure in Manual Mode. He needs a toggle so it can be turned off to be able to use the manual focus and see wha