Satellite M40-231: Windows needs the battery under XP Pro drivers

Similar Questions

• Can satellite M40-231 - I upgrade the GPU (graphics card)?

  Hi all

  My Satellite M40-231 has an ATI Mobility Radeon X 600 SE and I would like to upgrade to deal with the demands of today's games, but also a new HARD drive, but the latter, I think that I can go as far as the 120 GB HARD drive.

  SUGESTIONS are welcome.

  TKS

  Sorry, buddy, but this is not possible!
  There are several discussions about upgrading the GPU on mobile phones and all the threads said the same thing that's not possible.

  The point is that most graphic cards chips are outside the motherboard and cannot be deleted.
  You must understand that technology for portable computers is not the same thing as the technology of desktop PCs and more upgrades are not possible.

  Which could be upgraded are the memory modules and HARD drive.

  See you soon

• Satellite M40 does not detect the battery

  I formatted my laptop and installed xp and I have problem with battery
  The Device Manager shows that without pilot and don t see autonomy and no change when you plug in the power adapter.

  Is there a driver for the batteries? Or if windows detects

  > Is there a driver for the batteries? Or if windows detects
  Are you serious? You need a battery driver?

  Sorry, but buddy I first heard about this driver there is NO driver battery and you don t need these drivers.

  The battery should be detected automatically by the operating system.

  If you want to see the battery in the taskbar, then I recommend that you install the Toshiba Power Saver. The energy saver must switch to the battery during the passage of the AC adapter in and out.

• Satellite R 630 - BatteryBar Pro shows my wear and tear on the battery under the name more 14%

  Hello

  My R630 is only a few months old, but in BatteryBar Pro, it's showing my wear of the battery under the names of over 14%.

  What is classified as wear unacceptable battery to get a Toshiba replacement battery and how is the best way to exercise oversight?

  Thank you

  Matt

  Hello

  To be honest I n know this software, but in my experience such tools are not always correct. I have what to say is that no one knows whether the values supplied are true or not to my knowledge there is no actual parameter which could provide such battery information
  It would be really interesting to know the values provided from other similar tools and compare this

  However the battery is part of consumables for laptop. Sooner or later each battery die it s just a matter of time
  As far as I know each battery (regardless of which manufacturer it is) is covered by the warranty for a year. So if the battery would die in the first year, then you can get it replaced free of charge.

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• BlackBerry Smartphones BB Bold 9930 cannot find the battery under device options saving Mode

  I have a BB Bold 9930 with OS v7.1.0.163 and I can't find the battery under device options saving Mode. I was told that I needed to update my device to a newer version, after around .3xx software do not know that. But when I try to update my device through BlackBerry Web page software or Office Manager, they both tell me that my device software is up-to-date. How can I update my device software to a newer version on OS 7.1?

  OK, I thought that you must have some higher than 7.1.0.342 BONES to get the battery in watch mode on your output device. Apparently Viva has not published a more recent OS you already have.

  Operating system device provided are "released" by specific carriers once that they are certified and trained to their support technicians, but still, you are able to load any carrier the same model by following the instructions below.

  See the link below to download it and follow these simple instructions.

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.

  https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=C6BFF625BDB0393992C9D4DB0C6B...

  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  Note: Some users may be concerned they will void their warranty of device by loading an OS from another carrier. There is really nothing to fear. Please read more information about it here: http://www.port3101.org/power-users/296-blackberry-os-upgrade-including-betas-myths-dispelled.html

  BlackBerry Handheld Software v7.1.0.1189 (Multilingual)

  Package Version: 7.1.0.1189
  Composed of:

  • Applications: 7.1.0.355
  • Software platform: 5.1.0.288
  • File name: 9930AMEA_PBr7.1.0_rel1189_PL5.1.0.288_A7.1.0.355_C _Spire_Wireless.exe
  • File size: 207,62 MB

• When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  1. Question

  When I opened the window "save the Page under", the drop-down box file name indicates the files that have been saved a long time ago. It is not cleared by a function 'clear history' that I can find. How can I erase this?

  Hello.

  I think this is a related issue of Windows, because it is the Manager to save the windows file that we are talking about here (right?). You should contact Microsoft for help with this one, I think. You expect to be able to delete entries simply by touching delete on your keyboard when they are concentrated (that is how it goes for the removal of the form entries specific autocomplete in Firefox), but I have not tried.

  I'm sorry I can't be more helpful.

• Satellite A100 - will not charge the battery

  Hello

  I have ned to help. My Satellite A100 will not charge the battery. He works the power adaptor for the led indicates charging status, battery shows 1% of loading tatus information, but none does change - no loading any time. When disconnected everything just stops off like normal desktop.

  I've already put battery in and out, made upgrades to the antivir software, makes Toshiba controls, tests, but what ever he did did not any change. If there is no way for restoration of battery how to check what the problem is I have no second battery or AC I can always buy new batttery but I don't know if the old one is broken and weather new would work properly?

  Best regards
  pawelg

  Hi pawelg,

  I agree with the user above. The battery can be charged only up to 500 times, and after that, it must be replaced. I think it's the case now, I mean that everything works correctly on the AC adapter so I think that the battery must be the reason for this.

  By the way: you can buy a new battery to an authorized service provider. ;)

• Satellite M70 do not charge the battery

  My satellite M71 do not charge the battery, not only when works now, but also when power is off. Do not charge batteries supplied with the adapter plugged.

  Hello

  I agree with the user above.
  This really looks like a malfunction of the battery. I put t know how old laptop is but generally cover the battery for about 1 year.

  You know that, after the words of 500 of loading and unloading procedures battery automatically loses performance and battery life battery decreases.
  It s nothing unusual.

  But if the battery is new, you must contact the ASP (partner) in your country.

• Re: Satellite A200-23N - I need the program that displays the status of the battery

  Can someone help me?

  I need the program that shows me the status of the battery of the laptop
  My laptop model is Satellite A200-23N.
  Please I need help!

  Hello

  What operating system do you use?
  Usually in the taskbar, it is symbol of power, and if the laptop is running on battery power power move the pointer of the mouse over this symbol and info on the battery power will be shown. You can see how can % of battery power has.

• Show the three electrical energy in the battery under Windows 7 instead of two

  I am using Windows 7 on my laptop, and I usually spend between High Performance (when the power cable is in) and energy savings (when the power cable is not in). When I switch between patterns of consumption, I click the battery icon, and that brings up a list of available power schemes. However, it shows that balanced and saving energy or high performance. It will show only balanced, High Performance or balanced and Power Saver. I have to click "more power options" to select those I want. Is there a way to make energy savings and high performance also well present, or otherwise increase the number of poster eating patterns?

  the above seems to have started to work after a reboot. Maybe I made a mistake of syntax on strike 1.

• Acer aspire 5740-6378 will no longer charge the battery under Windows 7

  The title sums it up.  I have a new computer that beginning yesterday will not charge the battery.  I didn't have problems with battery or power systems before that.

  * original title - (sector, do not load) with 21% of battery. It has been so for 24 hours after several reboots. It is a 2 month old acer aspire 5740-6378. Is there a way to reset the power control software? So far, he has played very well.*

  Managed to find a solution that worked for me.   I write this to help those who like me have sought a forum where this problem has been fixed.  I sent to acer tech support and they finally gave me this procedure:

  Could you please go through the following steps to perform a power drain: 1. unplug the adapter from the laptop. 2. remove the battery. 3. press in and hold the button for about 30 seconds, then release. (You won't see anything happen) 4. connect the power adapter to the laptop. Make sure that the power adapter is plugged in. 5. Start the computer as usual. 6. After Windows starts, insert the battery. I hope this helps someone! Mike

• Satellite M40 - how to restore the factory without ODD settings?

  Hello

  My HARD drive crashed a few days ago on my Toshiba Satellite M40.
  So I bought a new HDD IDE to use my Toshiba WinXP recovery DVDs. But my internal optical drive does not work.
  My BIOS does not let me start on an external optical drive...
  I tried to use another laptop recovery DVD but it says 'this recovery DVD is only for Toshiba laptops.

  All I want is to try to find a way to use my restore DVD...
  Can someone help me? or ideas?

  Concerning

  Hello!

  I think that every resident has reason. You can restore t to factory settings on the recovery disk Toshiba no CD/DVD drive work.
  If you want to use the Toshiba Recovery disk, you need to replace the CD/DVD drive!

  But as resident suggested, you can install Windows XP with a disc of Microsoft. Therefore, you don't need a CD/DVD drive work.

  It of your choice what you do! Either you replace the CD/DVD drive, or you use a disk of Microsoft.

  Good bye

• Satellite M40 - how to use the recovery cd

  I have a laptop Toshiba Satellite M40 using XP Home
  My anti virus has caught a virus and delt with him.

  He told me to reboot, which I did. When he started toward the high winlogin.exe TI displayed cannot start because it is missing shell32.dll
  I clicked OK and it showed lsass.exe failed to load because it is missing shell32.dll
  I clicked on OK and a message showed the user interface login user interface dll failed. Msglna.dll failed to load. replace or restore the original dll.

  I restart and it brings back me to winlogin.exe message.
  Normally I upload these files and install them, but I can't the computer on at all.
  I can't get the safe mode or safe mode with prompt orders and last known configuration failed.

  I have a Toshiba restore disk but I don't want to do a full reformat and the other option on the drive says not to use it if you know what you
  made with files - and I do not have.

  I watch the options he had, but it just made no sence and would not make my situation worse.

  I hope someone can help.

  Thanks much sally

  Hello!

  Looks like you have a strange virus on your laptop

  But I put t know why you don t want to do a complete reformat of the laptop. The point is that the Toshiba Recovery disk contains a picture of the factory settings. This means that you can restore t that only some files and you need to do a complete reinstallation of the operating system. To be honest, I think that it is in any case the best solution, because I think that the virus can only be deleted if you format the HARD drive using the Toshiba recovery disc.
  To use the only recovery disk, you must boot from it and follow the instructions on the screen. It of easy to use and only takes a few minutes.

  If you want to save some files before you begin reinstalling Windows, you can put the HARD drive into an external HARD drive enclosure. Then you can back up your data from another computer. I did it and I have had success with this and maybe you too. It s worth a try.

  And let me give you a little advice. After you have reinstalled Windows to use a good antivirus program and keep up-to-date. I have a good experience AntiVir (Freeware) and Kaspersky. In addition to activate the Windows Firewall or you use another firewall. Don t forget to install the latest Service Pack for your operating system and activate the Windows automatic update function. If you can get all of the updates in a timely.

  I hope I could help you, and now you understand the best deal.

  Good bye

• C50-A-19 t satellite does not start with the battery mounted

  OK, first post here.

  I see similar questions coming, but as they are never QUITE the same, I am that posing in a new thread.

  I left my Satellite from one day to the next (do not remember if I had put off, or he simply had 'gone to sleep', but it has been connected to the grid).

  When I got to reboot, I got a power light on, but screen blank (black). After reading a few similar complaints on the internet (via another laptop!), I tried to remove the battery and power from the grid.
  This worked well (I write him in this state right now).

  But whenever I put the battery and try again, it will fail in the same way.
  I tried this company "press and hold power for 30 seconds" without success (but I'm not 100% sure of the EXACT procedure actions sequence).

  I have a few questions:

  (1) I take the laptop away from my office - is there a problem with everything just works like this (i.e. of the grid, with no battery inserted) indefinitely?

  (2) in any case, I want to solve the problem.
  If the battery has run COMPLETELY flat, and that the laptop can not it lights but also operate normally?

  Alternatively, is probably that the battery has not experienced a catastrophic failure and simply needs to replace?
  If so, I'll just buy a. BUT...

  What I don't want to do, is to pay for a costly spare battery, to find that it was actually another factor at the origin of the problem, and I'm back to square one and out of Pocket!

  Any advice would be welcome.

  Thank you

  Mike

  Hello

  According to your assignment, in most cases, you use the laptop connected to the power adapter but no battery. Is this correct?

  First we need to know that if the AC adapter is plugged in, the laptop should work correctly with - and without inserting the battery.
  If you unplug the AC adapter, the laptop should automatically switch to battery power. In this case, it is important that the battery is pretty cool power to provide the power for the laptop.
  In case the battery is empty, the laptop will not light.

  I recommend to insert the battery plug the power adapter and charge the battery for a longer period of time.

  You should also check if the battery is recognized by the Windows system and the battery charge indicator (battery in the taskbar icon) shows the State of battery charge.

  In case the battery is fully charged and the laptop does not work using the battery power only, you should test the new battery.
  If new battery does not solve the problem, s for laptop hardware needs an audit.