Satellite M40 - drivers PSM42E

Similar Questions

• Satellite M40 - I can't find the drivers

  I can't find any reference to the M40 model PSM43A - 11000H drivers on any website of Toshiba.

  The most appreciated assistance.

  Hi mate,

  It seems that you have a Satellite M40, you have a Satellite M43. Model number PSM43A - 11000H I can find on the Australian Toshiba page:
  http://www.MyToshiba.com.au > Support > downloads

  So search for Satellite M43 and then you can find all the drivers! :)

• Satellite M40-129 and drivers Win7

  Hello

  I just installed Win7 on my Toshiba Satellite M40-129. It was really hard... Windows refuses to complete the installation until I deleted pcmcia.sys in the windows system folder.

  Now I have the problem that my pcmcia cardbus is working nor my SD card reader. As soon as I ask for Win7 to update driver PCMCIA, the doesn´t of the computer unbootable until I have again to remove pcmcia.sys.

  Now my question: I can live with having one for not working the PCMCIA port, but there all the drivers available for windows 7 and the Cardbus SD?

  Thank you very much.

  Technohead

  This old Satellite is not supported for Win7 and you won't find any driver for it. It is not easy to configure the hardware on these old books but Win7 has good drivers base and, after several Microsoft updates most of the equipment must be installed correctly.

  What you can try is to try to install the driver designed for another model of laptop. Perhaps satellite A100 or Satellite A200. I put t know if this will help but you can test it in any case.

• Re: Where to find the drivers for satellite M40-110

  I need the right updated drivers (especially since the update of the Bios) to M40 - 110, but the official site there are only drivers for M70 M100 &... WHY?
  I need the drivers now.

  Hello

  There is a simple explanation, why you can't find the drivers for the Satellite M40 in the area of the laptop.
  The old series of mobile have been moved to an area of ARCHIVE of the page of European driver of Toshiba.

  So if you need the drivers, go to the ARCHIVES-> Satellite-> Satellite M Series-> Satellite M40

  ;)

  Good bye

• Drivers Microsoft for BT to Toshiba - Satellite M40-230

  Hello, I have a Satellite M40-230, drivers bluetooth is the TOSHIBA one, and I need to be a microsoft because of this:

  "LabVIEW works with Bluetooth devices that use the Microsoft Bluetooth driver included in Windows XP Service Pack 2 and later versions. Refer to the Microsoft Web site for Bluetooth devices are supported by the Microsoft Bluetooth driver. Most Bluetooth devices are issued with a Bluetooth owner driver. To use the device with LabVIEW, the Bluetooth adapter must use the Microsoft Bluetooth driver. »

  When I trie to change the driver in the "Device Manager" there are only the option of TOSHIBA, someone knew how to change it?

  I apologize for my English, thank you.

  Hello

  I understand your problem, but I Don t understand where the problem lies. After a search on google for "Microsoft Bluetooth Stack", I found thousands of results on this issue, please go to www.google.com and type "Microsoft Bluetooth Stack".

  Moreover, here some short [Document | www.ezurio.com/files/Microsoft_Bluetooth_Stack.pdf] which explains how to install Microsoft's Bluetooth stack...

  Welcome and good luck

• Can not find the drivers for my Satellite M40

  Why I can't find my laptop model [SATELLITE M40-P530 (PSM40L - 07700C)] 'http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU' I want to download my driver please tell me at [email protected]

  Have you also checked the ARCHIVES under "Type of product?

• Satellite M40: installation of Windows 7 Home Premium

  Hello

  I am trying to upgrade my Satellite M40 (PSM40A - 03 K 009) for Windows 7 Home Premium, but towards the end of the installation, my laptop reboots and freezes you try to start Windows 7.

  I restarted in safe mode, and it seems to get stuck loading \windows\system32\drivers\classpnp.sys.

  I have tried everything I can think: Startup Repair running on the installation disc, install the latest versions of the drivers, update BIOS, disk reformatting, etc, but nothing seems to work.

  Can anyone help?

  See you soon
  Rob

  Hello Rob

  Please don t get me wrong, but this old notebook was designed for Windows XP Home edition. I imagine that you have problems with the installation of Win7, but I'm afraid that there is not much you can do about it.

  This laptop old models are not supported for Win7 and Toshiba will not offer some updates as the BIOS update. If you want to use the newer operating system probably you must also update your hardware. Maybe it's time for the new laptop computer. ;)

• Satellite M40-265 LCD displays the image complete but crushed

  Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

  When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

  When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
  Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

  Starting in safe mode is possible to use a display fullscreen on external

  Hello

  The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
  I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
  In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
  I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

• Satellite M40 (PSM40): where to find a NVidia display driver?

  On the way to update my driver, I uninstalled old, but the driver I found on the nVidia site will not work. (The error message: "Setup nVidia didn't find all the drivers that are compatible with your current hardware.) The installation program will now stop. »)

  I then searched a driver on the Toshiba site, but are all there drivers ATI or Intel. So, when I check my system, it does not find my video card (I use the method of debugging) and there is nothing other than the basic thing of VGA.

  It's scary because I know that you can not change the graphics card, and if I can't fix this, then I'm screwed. =/

  Video card: nVidia GEFORCE FX 6600 (which I can't find on the nVidia site)

  Hello

  Very strange can you please post you detailed name (number of your laptop)?
  I searched the Satellite M40 with graphics card nVidia but didn t find any model
  I also checked the Toshiba driver page and didn t find all the graphic drivers for the nVidia card.

  You will not be able to install the original graphics drivers on the graphics card manufacturing site because the graphics drivers from Toshiba are a bit changed.

  What drivers graphics omega? Have you tested it?

• Who installed Vista Ultimate SB to the Satellite M40

  Is there anyone who have Vista Ultimate installed Satellite M40? I have big problems to install Vista. After that I have disabled the PCMCIA is OK. I'm looking for a new update of the BIOS and the Vista drivers.

  Hello

  I m a M40 owner but I did not install Vista on this unit. I use the XP.
  I have not installed Vista on this unit because according the Toshiba document I found in this forum the Toshiba drivers are not available and I n t think that this driver will be available in the next time, or any time for this series of laptop.

  Is the laptop has Vista capable sticker? I don t think so :(

• Vista on Satellite M40 - 285-> is there any problem?

  Hello

  I have a Satellite M40-285, my wish is to install Vista on it, I know about pcmcia issues that lock boot Vista and solve their pcmcia.sys file renaming, but this does not solve the problem really, pcmcia slot and card reader didn't work.

  So I would like to know if Toshiba will launch a driver for Vista, or, everyone has solved this problem with any tip where Vista starts normally and pcmcia works fine?

  Thank you
  Kind regards.

  Toshiba M40 satellite will certainly not throw all Vista drivers or tools. This device is not Vista capable and there is no support for Vista. If you want to test with Vista create the second partition and try to install Vista on it. I did the same thing on my Vista not supported by Satellite M70.

• Satellite M40-185: fake keyboard settings

  I had to format my laptop (satellite m40-185) and then I install Win Xp sp2. I did not use the recovery CD because I have lost: (.) I download and install the proper drivers and the only problem I have is with the keyboard. Some buttons are not in the right order.

  For example I press shift + 2 must type, put in place there type @. Anyone knows it I can find the appropriate drivers for this problem?

  Your keyboard is set to the United States. If you go to the control panel (keyboard), you should be able to change that for the United Kingdom.

  Richard S.

• Satellite M40: Question about the installation of the driver

  Dear Toshiba

  I have Toshiba Satellite M40, when I installed with win Xp recovery CD, I found everything is ok except the following:

  When I go to 'connection area action' and press 'install' botton to install client for netware... I have the following message:
  "unable to find the drivers for this device...". If you have a disk that contains the driver update or windows search click ok"

  Help, please
  Thank you

  Hello Mohamed

  It seems that your laptop is trying to install the network driver, but the operating system can find t he or you the driver source is false.
  In this case you must download from Toshiba Web site network driver and install it.

  Good bye

• Satellite M40-192 - Linux and network

  English (but not perfect ;))):
  First I want to install Suse Linux 10.0 on my new laptop (Toshiba Satellite M40-192), but Installation did not work, and so I had to install linux in text mode. Now, there is another problem with Suse Linux... NETWORK.

  The Lan network is not working well, but the conifguration is right. Is there a will (drivers,...) or 'hope' lost, suse linux 10.0 running on my laptop? This statement, must then appear, I want to buy a laptop.

  I hope that here follow many answers, to solve my problem.

  Thank you!

  Hello Dorfi

  As you know that Linux is not supported by Toshiba and if you want to install it, you're on your own. Unfortunately, I have no much experience with Linux, but try it please visit the Toshiba Linux. You can find it under
  http://www.Linux-laptop.NET/Toshiba.html
  http://Linux.Toshiba-DME.co.jp/Linux/index.htm
  http://newsletter.toshiba-tro.de/main/index.html

  Maybe you'll be lucky if anyone has the same or similar problem.

  Good luck!

• Satellite M40: Modem fails the diagnostic test on WinXp Pro

  Satellite M40 comes with Windows XP Home Edition pre installed and when I ran the diagnostic tools to test the modem the modem passes the test. But when I installed Windows XP Professional SP2 media center, the modem fails the diagnostic test.

  What surprises me is that I have not received any error during installation and all devices, including the installed modem OK with no problems.

  Another observation when I tried to connect to the Internet using our dial back of company during installation of Windows XP Edition family's volition I remembered and the modem responds very well. But with Windows XP Professional SP2 media center installed the modem call how ever in "waiting for call-back ', when the server of our company try to call me, the modem does not respond and waits until I get the message Time out

  Please if anyone has an explanation for this decision No. let me know because it is driving my nuts.

  Thank you
  Oumy

  Hello

  Have you tried to install the latest driver of modem? Please check if you have the right driver for Win Xp. You can find the drivers on the Toshiba site.

  http://EU.computers.Toshiba-Europe.com

  They are a lot of drivers for countries individually.

  In addition, Windows XP SP2 includes the new Windows Firewall. It is possible that the firewall is preventing the modem connection. You can try to disable the Windows Firewall.

  Good bye