Satellite M40 - Fn + F8 key does not

Similar Questions

• Satellite C660 - the SHIFT key does not work

  Hello

  I have a problem with a Satellite C660.
  The keyboard, I cannot use the SHIFT key. After you have installed windows everything worked properly, the problem recurs after a few days. Practically the SHIFT key does not work.
  On the one hand I'm the A and the other side works like ESC.

  Help me I'm crazy.
  Thank you.

  Hello

  To me that sounds more like a keyboard failure, I can't imagine that it could be linked to the question of the windows operating system do you have tested an external USB keyboard.

  Please test this. In this case, you can check if it s really a software problem.
  If the USB keyboard works correctly, it means that your internal keyboard is malfunctioning.

• Satellite C660-B080 - FN key does not work with Win 7

  Hello

  My laptop model is' satellite C660-B080 & only part no = 'PSC0SV-02G01JAR' with windows 7 Ultimate 64 bit SP1

  I downloaded the driver from the website, but the FN key does not

  Please help me with this.

  Thank you

  Must be installed:

  -Value Added Package for Windows 7 64 bit
  -Flash utility Cards with support for Windows 7 64 bit

  These two tools are located on the Toshiba driver pages.

• Satellite A500-1f5 - FN key does not work with Win 7 64 bit

  Hello

  The FN key does not work

  I have the installer: added value package + Flash Cards Support utility

  Laptop model: Satellite A500-1f5

  WIN 7 64 bit

  Thank you

  Hello

  Try restarting Flash cards.
  Start > all programs > Toshiba > utilities > restart Flash cards.
  After doing this press FN button several times.

  or remove the vap utility and support of flashcard and download:

  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  Then install the utiliy and flashcard Vap, support.

• By Satellite A350-200 FN key does not work

  FN key does not work. .. help me please

  What do you think of the radical solution to install the new OS by using recovery image?
  With the factory settings, it will certainly be working again.

  One last thing: * can you please confirm that he has worked in the past? *

• Satellite M40-237: CD Boot does not not + is possible startup USB key drive

  * Model: Satellite M40-237 (PSM40E) *.

  I decided to reinstall windows, my hard drive is now formatted. So as usual, boot from the Windows CD is necessary to start the instalation but it does not start. I never had problems like this, always worked boot. It's as if there is no bootable CD in the drive (but it is bootable and it works on another PC).

  -J' have the latest version of the BIOS
  -The BIOS detects the optical drive and everything is ok, HARD is the ODD main drive is secondary
  -J' tried selecting the boot priority, with F12 and/or the BIOS setting but it works anyway

  What could be the problem here? Drive does not properly (hopefully, that and not something worse)? I had some problems with the drive I have (...) before, but it reads the disc normally and as I said start was working fine before. I cleaned the lens a bit, disconnected it and it put. Is there something more, what can I do?

  I'll try to find someone who has the player that fits so I can try with that one, but who knows when is what will be.

  Now, here's the second question, which I've linked to this. Because my laptop is practically useless now (I can't install anything), is it possible to boot from a:
  (a) optical drive USB external
  (b) USB flash drive

  BIOS on this laptop has no USB boot option, it has HARD drive / CD / floppy / network. But I red somewhere this FDD = USB legacy emulation is enabled.

  If that is correct, I should just plug in the USB key and select FDD as boot option? If I can't find a USB optical drive, I thought make it bootable USB flash drive and copy the installation of windows xp on it. So once it starts in DOS I start just the installer from the key.

  TNX

  First I must say that the initialization of memory flash USB (USB key) is not possible and you shouldn't t waste time to try this.

  With regard to your reader of CD/DVD boot problem
  Well, it s really strange, it sounds a bit like a sort of master/slave/c-salt settings problem. But generally, you should get an error IDE (#0 or #1) if one of the devices (ODD or HARD disk) would not be recognized?  :|
  This whole thing seems mysteriously
  There may be a firmware issue

  Several months ago a friend of mine was not able to boot from the CD.
  He went into the BIOS and set the BIOS default settings.
  This has contributed to

  This is a suggestion, but I'm really putting t know if it helps.

• Satellite M40-307: accessibility utility does not work with the limited user account

  Hello everyone,

  I have a Satellite M40-307 (PSM44E), and I had a problem with the utility "accessibility", which displays an icon in the notification bar of Windows XP, to inform the user if the "Fn" key is active or not.

  This utility would not work for the administrator would not worry so much, because the administrator is supposed to know what he does. But the limited user doesn't have access, that bother anymore.

  In Administrator, this utility works quite well. But during a session of limited user, if I try to launch it in [runas / user: admin "C:\Program Files\TOSHIBA\Windows Utilities\TACSPROP.exe"],
  I am replied that the file TCMSVR. DLL is not found. If I launch normally, a message tells me that this utility requires that I am logged on as administrator.

  So, what can I do to use this utility normally, i.e. in a limited user Sessiona? *

  Hello

  Well, you should try to activate the rights for the TACSPROP.exe.
  To do this, you must enter the operating system as an administrator.
  Choose the application, right click. There is a Security tab. Here, you need to activate the permissions for all users.

• Satellite Pro L20 - Fuction key does not

  Hello

  I have a satellite Pro L20 running xp pro. We use at the school, connected to a projector to display on the screen for children to see.

  the problem is that we use the Fn + F5 key on the laptop to scroll the screen option (two screens or not) but nothing happens, it seems that it does not meet our request. and the projector read no source found. Some days she turns on automatically, but when it doesn't. We are stuck, I tried to look into the display properties, but nothing here to try n force both screens light up. Help

  Azab

  Hello

  Also try switching to the external device settings Intel. You can find it under Advanced display settings. I also recommend you to reinstall the TOSHIBA utilities. I'm not 100% sure but it may be responsible for the function FN + F5.

  Also check Toshiba HWSetup under the view tab. Activate LCD + analog RGB option.

• Satellite A200-1ZF - FN keys does not work in WIn7

  Hi all.

  Does anyone had the same problem on the keys FN on A200-1ZF?
  I reinstalled the operating system, Windows 7, and after installing all the drivers, I can't change the light from the screen by pressing FN + F6 or F7.
  Also, does not any option with FN key combination.

  Does anyone know how to solve that?
  Thank you.

  Hello

  I m A200 not owner but I A210.
  I could get the Fn keys work in Win 7.

  First in landed the VAP for Win 7 and then I installed the Toshiba Flash Cards for Win 7 support utility.

  I downloaded both the European driver Toshiba page tools. I chose the tools available for Satellite L500.
  You should try this too.

• Satellite L505-13D - Fn key does not work

  Hello
  I have some problems in my laptop

  Key Fn - 1 does not work with any service of Toshiba, only with windows keys, this happened after some windows critical updates (win 7 64 bit)
  2. I have not found my cell phone ' number series or in the site Web of Toshiba part number.

  Please can someone help me
  Thank you

  Hello

  The FN keys are controlled by the Support of Flash memory card utility.
  You will need to reinstall this tool.
  But also the VAP (value added package) must be reinstalled.

  I recommend first of all remove the system from the Flash and the PPV card.
  Then restart the device and clean the registry with CCleaner.
  After that, you need to install the two tools VAP and Flash memory card Support utility

  Good bye

• Satellite Pro A200 - Fn keys does not work with Windows Vista

  Hello

  I own a Satellite Pro A200-PSAE7E and a license to retail for Windows Vista Ultimate 32-bit Edition (with SP1) is installed.

  Before installing Vista, I have updated the BIOS to the latest version available on the Toshiba site ([http://it.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/vista_drivers.jsp?service=IT]).
  BIOS version is now 2.20 - WIN32 contained in this file: [http://support.toshiba-tro.de/tedd-files2/0/bios-20080404121735.zip]

  After the installation of the operating system, I installed "Value package" ([http://support1.toshiba-tro.de/tedd-files2/0/vap-20080109135106.zip]) that contains the "utility Flash Cards". In my understanding, the installation of the "value added package" should allow the use of Fn keys.
  This doesn't seem to be true or not true.

  Here's what's happening.

  -Prior to installation of the 'value-added' package, all Fn keys did not work.
  -After installation of the "value added package", if the process of TCrdMain.exe is running, all Fn keys do not work.
  -If I remove the startup TCrdMain.exe and I restart the PC, only a few keys Fn function (Fn + ESC, Fn + F1).

  There is no way (or I have not found a way) for all keys Fn works.

  Someone knows how to fix this?

  Thanks in advance,

  mme000

  I am not sure, but it may be because of the SP1. I installed Vista Ultimate on A200 and stuff all listed (drivers, tools and utilities) from Toshiba support page.

  Contains your Vista DVD facilities SP1 or you install on your own? If you install Vista Ultimate Edition (without SP1) and all the stuff on the Toshiba support site order Instructions of facilities.

• Satellite L735-103: one key does not work after BIOS update

  Hello

  I got a Sat L735-103, part no: PSK0CE - 00N0OUEP and I download the bios for this pc, toshiba Web site.
  I have updated bios with no problem, but now a realization thatm a key (the key located in the good of "* f ' and 'z') of the keyboard does not work.
  I have a plate with windows and linux, and the result is the same.

  Maybey I need to go back to the old bios, but in the toshiba Web site only have a bios download: (.)

  Hello

  Somehow, I can't believe that this button malfunction has something to do with the new BIOS.
  Have you noticed the anomaly key immediately after the update of the BIOS?
  You have default BIOS? If not, access the BIOS by pressing F2 when starting the laptop.
  Here, you can set default BIOS and then save the changes.

  If this is not enough, I would recommend contacting the Toshiba ASP because the technician must check whether the button is defective. In this case, replace the keyboard. The technician would be able to downgrade the BIOS as well and could check if it of really a BIOS issue.

  To find an authorized Toshiba (ASP) Service Provider anywhere in the world, please visit:
  http://EU.computers.Toshiba-Europe.com--> "Support and downloads"--> "to find an authorized service provider" (down in the menu maintenance & repair).

• Satellite Pro L100 - FN keys does not work

  When I press Fn + F5 to switch between my LCD and an external monitor, nothing happens. Do not see all the windows appear on my screen to display the current mode of the screen (LCD or external) while I'm activating/deactivating keys.

  By pressing Fn + F1 (function of the white screen) also does nothing.
  However, the brightness & related Fn + sound combinations work.

  It seems as if a utility somewhere does not work.

  Please notify.
  Thank you.

  Hello!

  You use Windows XP or Vista?
  For Vista, install the package on the Toshiba value added in.
  For XP, install the shortcut key utilities and utilities Toshiba.

  The two you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Satellite A110 - 225 FN key does not work

  Hey,.

  For some reason, I cannot adjust the brightness on my screen with the button FN and F6 or F7. It worked a few months ago, but no longer works. The FN key works, I get a green light when I press it. In addition, the combination of F1 - F5 are working only F6 F8 does not work. I can't adjust the brightness, or wireless capabilities...

  using windows xp from the original installation...

  any ideas?

  Thank you

  Hello

  Visit the page of European driver of Toshiba and download the utility of keyboard shortcut for the A110 - 225 (PSAB0E)
  Try to reinstall again!

  Check it!

• Satellite A200-1AX function key does not work do not

  Hey all

  I have installed XP a few weeks back and updated the bios to the xp version
  I didn't like it and I went back to vista but now my function does not work.

  I press and press the screen brightness but controls no longer appear and I have to use manually with my mouse or via the mobility Center
  is it because of the bios? I downloaded the new bios for vista and now it says that the rom space is full and closed unexpectedly

  What should I do? Help much appreciated

  Hello

  The problem is that you must update the BIOS to the XP version if you want to use all the features of the laptop on this laptop.
  After installing XP, you must update the BISO XP, and then you install all the drivers Toshiba XP available and public services.

  This should help.