Satellite M40 resume Hibernate when the lid is opened

My M40 RESUME from hibernation/sleep as soon as I open the cover, currently in the standby power button action is set to Hibernate and cover is set to do nothing do I put into hibernation and close the lid when I open windows back it doesn't wait for me to press the power button. Is it possible to take that when I press the power button not when I open the lid. or is it a defect?

Hello

Well, as far as I know the power of setting energy saver button is official on Shut down
and the lid close to stand-by. You can check if it works.
In addition, you can go to the--> Power Options Control Panel.
There, please check if eating patterns are defined on Toshiba Power Saver and take a look on the Hibernate tab.
Check the settings.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite A100-237 screen remains off when the lid is opened

    OK I'll try my best to explain this. My power settings are adjusted so that the computer has no effect when the lid is closed - except for the display, which is turned off and back on when the lid is opened (normal behaviour).

    Now, in rare occasions, when I opened the back cover, the screen doesn't come back, unless I close the back cover and open again. It is not a big problem for me at the moment, but I'm afraid that the connections of the screen with the motherboard by the cover have been damaged.

    BIOS version 2.00, maybe an update could solve it?

    Thanks in advance.

    Hi Ataberk,

    I think that your problem can be caused by the micro-switch that will detect when the laptop lid is closed. If this switch is in the open position so your screen will remain off even with the lid open. The idea here is that you can get the display by closing and opening the lid again.

  • Satellite U - Vista starts when the lid is closed

    Hello

    The title says it all!

    My girlfriend showed me her cell phone yesterday. She manually stop it on the start menu, leave for a few minutes, close the lid, then watches in joy as the computer laptop Springs revive again.

    I checked and the judgment indeed makes a stop, not a hibernation or something like that. I also changed the lid closed to "nothing" action and "stop" and I tried various methods to stop this strange behavior. My only solution was to have vista recognize the lid close like a stop action and have this control by turning off the laptop. Unfortunately, my girlfriend is a woman of routine and like to manually turn off the laptop before closing the lid, so my solution is not a long-term one.

    One thing that I've seen is that she had managed to install Uniblue Registry Booster. I quickly removed it, but wonder if it could have changed his behaviour of the laptop? Surely the fact if boots up when it is turned off when the lid is closed could not be attributed to Vista or whatever it is that was done for her?

    Thank you

    Chris

    Hello

    Can you please tell us what laptop you have exactly?

    I assume this has something to do with the alarm clock on the keyboard/LAN feature in the BIOS

  • Laptop starts up when the lid is opened

    I spilled some water on the laptop. I used AC power with no battery attached. When this happens, I quickly pulled the plug. I knew that the warranty does not damage the water so I dissamble each component and put them in dry box for a week. Then I used alcohol to remove all stains left behind.

    After I got everything back up, the laptop starts fine when the lid is closed and hooked to an external monitor. Can I use any program withou any problem. But it wouldn't start when the cover is open. It was as if someone was holding down the power button to force the computer to turn off.

    My question is, how the laptop detects if the lid is open or closed? It is magnetic, or is it using a switch as a reed switch?

    my laptop is HP Pavilion SleekBook 14 14-B031TU with the motherboard: DA0U33MB6D0-698523-001.

    Kind regards

    Ahmad

    Most newer laptops have a sensor (switch) magnetic in the cover of the screen bezel or the touchpad.

    You can test that by sliding a small magnet around the telescope cover touchpad area and/or.

  • Laptop Dell Studio 1555 w / Vista does not wake from sleep when the lid is open.

    I have a laptop Dell Studio 1555 with Vista Premium 64-bit. Until last night, the laptop would run mode standby when I closed the lid and woke up when I opened the cover later. Yesterday I was downloading photos from a Canon camera via USB. I close the lid when I did. When I went to open the cover later the laptop screen remained in black and white. The power button is lit, but the only way I can get to meet is to hold the power button until it turns off completely, and then restart the laptop. A difference when the lid is closed, I think the power button will blink and turn off slowly while he was really in sleep. He remains on all the time now when the lid is closed. I tried to go into power management and put the laptop from sliding when the lid is closed, but has not made a difference.

    Run the system restore and choose a restore point created just before the problem occurred. Steve Winograd, MS - MVP (Windows desktop experience)

  • Satellite L650/078 - crashes when the lid is closed

    I bought this phone last Sunday and this is the only problem that I had with her. Whenever I close the lid, I'm greeted by a blue screen when I open it again.

    I checked all the drivers using the windows 7 update driver option, and he said that all my drivers are up to date.

    It looks like a graphics driver, a troublemaker... What if you go to power options in the control panel and choose, do nothing, in which cover done, option

  • Windows 7 starts by itself after hibernation when the lid is opened

    When I Hibernate my Satellite U500 and close the lid before the hybernation is finished, the laptop turns on automatically when I open again the cover. It's very embarrassing because the lid opens some in my purse and then, after a few hours, I discover that battery is zero and the laptop does not start.

    To avoid this behavior, wait until the laptop is completely put into hibernation and only then close the cover.

    I use Satellite U500 18 with Windows 7.

    Keyboard/WOL are disabled in the BIOS.

    Hey Buddy,

    > I have to wait until the laptop is completely put into hibernation and only then close the cover.
    In my opinion it s absolutely normal behavior and I don t see a real problem.
    I mean that it takes only a few seconds until the laptop is in sleep mode.

    What you can do is to check the Windows power management settings. Here you can define, the laptop into hibernation if you close the lid.

    Check this box!

  • x 230-do is not recovery mode standby when the lid remains open.

    If I close the lid it falls asleep, and when I opened the lid it is repeated.

    If I do not close the lid and it goes to sleep I can't wake up, tried to push the power button / stop flashing keys, trackpad, which does not.

    Any ideas anyone?

    Welcome to the community.

    have you tried pressing the Fn key?

    Kind regards.

  • 7520 Photosmart printer - ink cartridges carriage out when the cover is opened

    The transport does not automatically moves himself posted to the right of the machine when the lid is open.  I'm unable to change empty ink cartridges.  The machine was purchased new April 2013 and is out of warranty.  I turned off and turned it back over 15 min later, no change.

    Any suggestions?

    Hi @Clayball,

    I see that you have problems with the transport not to move to the middle in order to change the cartridges.

    I would like to help.

    I would like to do a hard reset to see if that will solve the problem.
    Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
    Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
    This ensures that the printer is full on and can help this situation.

    If the transport does not move freely when grasp the front, it's OK to gently push the carriage to the left or right to move along the rail.
    Fragments of paper can get lodge between the cart and the gas station.  It is important to look at the far right of the printer with a flashlight to make sure there is no debris.

    I handed a document with some measures to try to resolve the transport stall.

    A Message appears 'Transport Jam' on the control panel.

    If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
    Contact HP.

    Good day!
    Thank you.

  • Black screen on Satellite A300D when the lid is closed

    When I close my Satellite A300D the monitor turns off, of course. But when I open it again the screen remains black. I can hear everything is working normally (Windows Vista 32 bit).

    Can someone help me?

    Johannes

    Hello

    As far as I know the laptop to stand mode when the lid is closed!
    Please check your settings in Vista power options and turn off the lid closing option.

    In addition, I would recommend updating the BIOS and the driver of graphics if a newer version is available on the European driver Toshiba page.

    Best regards

  • Speakers satellite Z830 - 10 M is turned off when the lid is closed

    Hello

    I'm running a Z830 - 10 M with an external monitor. I want to close the lid of the portable computer, but use the internal speakers, but when I close the lid, the speakers will cease to resound!

    How can I fix it?

    Thank you.

    I guess that your laptop goes into mode standby when the lid is closed.
    Right?

    In this case, you must set the option to choose what closing the lid does nothing to

    This can be found in the control panel-> Power Options-> in the left column

  • How can I prevent the Satellite to sleep when the lid is closed?

    Hello

    I connected my Toshiba with an external HDMI monitor.
    The problem is that when I close the lid (I chose the monitors in dual options) instead of sending output to the screen external, portable sleeps.

    How can I stop the laptop to sleep when the lid is closed?

    Thank you for your time.

    Hello

    Go to control panel-> power options control
    Now on the left you will see the option called choose the closing cover

    Here you choose do nothing

    Concerning

  • Laptop will not go to sleep when the lid is closed

    Separated from this thread.

    Same problem here. My settings say that my Toshiba will sleep when the lid is closed, but half the time is not asleep and I can feel it's hot and turns on the fan. I am so frustrated with this new laptop and Windows 8.1. Looks like too many bugs in the software or something. More I am working on the new laptop the more problems that I find, like screen discoloration as well. The forums are useless. I do what they say, and the problem is the same. Forget the call from Toshiba. Needless. Nobody will help unless you pay them money to subscribe. What customer service?

    Hello

    Thanks for posting your concern here at the Microsoft Community forum. Let me help you with your concern.

    This problem may occur because of any change in power on your laptop options. If the default is set to hibernation and standby modes, your laptop goes to sleep when you close the lid, but then the Hibernate timer comes in and wake up your computer first and trying to Hibernate. He cannot go to Hibernate directly from mode 'sleep'. Go into the power settings and either disable hibernation or set the timer on a higher value.

    To apply the same setting to all plans:

    1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
    2. On the Select a power plan page, click choose the cover.
    3. On the page define power buttons and turn on password protection , next to when I close the lid, choose what you want your laptop to do, both when it is running on battery and when it's plugged in.
    4. Click on save changes.

    Tip: To save battery power and quickly resume working, select sleep. Sleep is a power saving state that allows a computer quickly resume the operation of full power (usually in seconds) when you want to start working again.

    To apply a setting to a specific regime:

    1. Open Power Options by pressing the Windows key + X, clicking Control Panel, click system and security, and then clicking Power Options.
    2. On the Select a power plan page, click change plan settings for the plan you want to change.
    3. On the change settings for the plan page, click change advanced power settings.
    4. Advanced settings tab, expand it cover and the Power button, action lid, choose what you want your mobile PC to do when you close the lid, for when it runs on battery and when it is plugged in, and then click OK.

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • Satellite M40-265 LCD displays the image complete but crushed

    Satellite M40-265 LCD displays the image complete but crushed on two-thirds of the screen

    When my Satellite M40 - 265 ATIMobility Radeon X 700 and omega 3.8442, Windows Xp drivers, Sp3 boots by setting the LCD + analog RGB, initially only displays on the external screen after startup can be switched with Fn + F5 on LCD. Then appears on the LCD, the complete picture but only two thirds of the screen, third, the right is black. It works so well when the external monitor is not connected during the boot.

    When defini set to auto, select the display to the computer starts only when an external monitor is connected, then after that, I spent in the LCD screen.
    Damage to the inverter is excluded as already checked. Inspect visually the cable of the LCD displays nothing. Beside the left speaker, a ground wire (black) to screwed, but it is s t connected anywhere.

    Starting in safe mode is possible to use a display fullscreen on external

    Hello

    The M40 is a not sure oldie about the available settings in the BIOS and in the graphics options, but I think you should check the settings of the graphics card ATI Catalyst.
    I remember that ATI catalyst supports certain options such as resizing the Image. Here you can select the image scale Panel option full size
    In addition, you must set the resolution on the internal screen at native resolution of 1280 x 800
    I think that the external monitor supports the resolution, which is not the same thing as the screen internal.

  • computer Vista laptop does not stop when the lid is closed

    I have all the correct power settings. mode when the lid is closed, I tried setting Hibernate and sleep. It just keeps running and running, I'm afraid it will overheat. but it should stop when the lid is closed, correct? Thank you sissy

    Hello banditpunpun2,

    Thanks for the return of the response.  I also go to your manufactures website and confirm you are updated with the lates drivers, updates the firmware and BIOS.  I even watch the forums on the manufacturer's Web site to see if others have experinced the same question.

    Please let us know status.

Maybe you are looking for

  • Satellite M30x-129 takes too long to start

    After pressing power botton (blue), that it takes up to 15-30 min before the computer laptop start start, something crashes @ select the boot device...I changed the RAM, I'm on my way to the processor, Please I need help with this...Thank you

  • Satellite Pro A200: Recovery using a ghost network boot disk

    Hi all Need to ghost several satellite pro a200 machines using a ghost network boot disk. When I use disk ghost provided by the ghost boot Wizard and no boot on PC back I get the message 'No Fast Ethernet PCI Adapter Found!' Serious internal error! (

  • Satellite L350 number pad work sometimes only

    Does anyone have an idea why the keypad doesn't work sometimes? Not in EXCEL or in the composition of YAHOO to name a few. He now works for a reason any 123456789 Thank you

  • Parallel loops in a Subvi RT in real-time and not

    Hi all I seem to remember learning (obviously not well enough) on a cRIO (vxworks) that if there were a Subvi with two parallel loops and loop fell asleep due to a wait function the other loop also be forced to sleep as they are executed in the same

  • Error code 80070570

    I know error Code 80070570 was discussed here a few times, but I have not been able to find the answer I'm looking for. Let me explain a few things: I am on Windows 7 My computer is 64-bit, a laptop HP g62-231nr My antivirus software is SecureIT Mana