Satellite M40X-116 - drive does not recognize any CD or DVD

Hi all!

I have a big problem with my SATELLITE M40X-116; I was watching a movie when the image was just stopped and since my CD/DVD RAM drive does not recognize any CD or DVD. What can I do?
Please I need your help as soon as POSSIBLE.
If you know what could be the problem, please, just send an e-mail to [email protected]
Thank you all for the cooperation
Best regards
Marian - Romania

Hello

to me, this looks like a hardware problem. It must be checked by the service, and perhaps that the drive must be replaced.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite M60-155: drive does not recognize DVD

    The multidrive on my laptop does not recognize DVD-he just turns and clicks.

    It recognizes the CD tho. I've had this problem before, but did not pick up the CD player and it plays DVDs.
    I managed to solve this last time, but I do not remember how.

    Any ideas?

    Hello

    Don't you remember how you solved the problem? ?:|
    Hmm, very strange.
    However, I think that it s a problem of calibration of lens of the drive.
    The lens can not be calibrated properly and that's why the drive cannot read the media.

    Have you tried to remove the drive from the laptop? If this is not the case, try to remove it. Then start without the drive. Then shut off the unit. Reinstall the drive and start the laptop. The firmware should take over again and maybe the lens is calibrated in the right position.

    You can also try to clean the lens gently. But if the whole points will not help you may need to replace the drive

  • DVD Sony player appears installed but does not recognize any CD or DVD

    I just bought a Sony Optiarc AD7260 DVD RW drive and installed in my system. I am running Win XP Pro sp3. My Bios says the drive is recognized by the latter and in the Device Manager in Windows, the drive shows up and says that "this device works properly." However, any disk I put in the drive (self burned cd / self burned dvd / retail music cd / dvd retail game / virgins DVD) never presents itself as being accessible. When the drawer goes in, I get the icon of the cd spinning for about 15-30 seconds, but then it goes back to the usual pointer. If I try to access the drive in Windows Explorer or any other program, it does not appear. I tried to use ImgBurn to get media info I had placed in the drive (blanks & with data) but it still says "incompatible medium installed" in the drive. The Optiarc is my 4th Sata device, 3 others are hard drives. The system is a dc7100 HP Compaq with 3 GB of ram. Any suggestions?

    Hello.

    Do you have the old disk, or access to another drive, try in the computer?  If these work then you will have a faulty drive.  It is possible to have a defective out of the box.  Also try a different SATA cable.  These can sometimes be problematic.

  • Satellite M40: Sonic RecordNow does not recognize the carpet * CD/DVD player

    Hello
    I have a satellite M40. The software sonic recordnow (version 7.31) not found cd/dvd writer.
    I check toshiba support and find a new update for Mat * a dvdram UJ 841 S. So I downloaded. But when I run it, an error message is displayed: "the target drive is not connected. How can I solve this problem?
    The thng is my cd/dvd drive works well: I can play videos and music CDs. I can burn dvd with dvdx soft. BU I want sonic difficulty.
    Thank uou for your help.
    NAT

    Hello

    The firmware update will NOT fix the problem of sonic!
    The firmware has nothing to do with this problem the firmware contains details and more information about the supported and compatible CD/DVD.

    I presume that some sound files or registry keys are corrupt and so the drive may not be recognized correctly by Sonic software.
    I recommend reinstalling the software Sonic!

    But why you don t use Nero burning program? In my opinion it of the best software for burning. I also use it and I'm very happy!

    You should try it

  • Satellite A205: Vista & BIOS does not recognize the CD/DVD drive

    After a crash of the sudden family Vista system premium on a Toshiba Satellite A205 the system does not recognize the DVD CD - RW drive. Neither in Explorer, Device Manager, nor BIOS.

    Laptop is only a few months old.
    Have you tried the Toshiba check system - it ignores DVD disk check.
    Tried Windows Update - does not help.
    Tried registry fix - does not help.

    Cannot use the CD to reinstall all drivers - because it is not recognized.
    The DVD drive LED is on. If the disk looks ok physically.

    Does anyone have an idea what to do?

    Very strange what s
    Try this:

    Access the BIOS and set the default settings and save the changes.
    If it doesn't help then I put t see any other possibilities for contact ASP in your country for a CD/DVD drive control and possibly a replacement

    You said that the notebook is only several months old so I assume that the warranty is still valid and that's why everything has to be done for free

    Good luck my friend

  • Satellite L50 - B suddenly does not recognize USB devices

    Suddenly my laptop does not recognize any USB.

    The USB key or external hard drive works on other computers, but not on my laptop.
    Only cards SD-are recognized.

    I tried to remove the usb portals on the Control Panel, but after I restarted my computer all returned.
    One reappear with a caveat that it does not work, but when I search a new program to run it, it can not be found. After removing it, it comes back with the same caveat.

    I also tried to download the new discs (chip set utility) but who doesn't either.
    I don't know what else to do.

    Can someone help me if I can access my USB-products once again on my laptop?

    Hello

    What about the USB mouse? You can use the USB mouse connected to one of the USB ports?

    Have you changed the system or you have installed new OS on this laptop?
    I m asking because the L50 - B Satellite supports USB 2.0 as well USB 3.0 ports

    In the case where you have installed the new OS (Win 7?) on this laptop, the USB 3.0 ports would require additional USB 3.0 driver

    However, in case that you are always using the OS preinstalled Toshiba, I recommend you to reset the initial setup and test the USB ports once more.

  • Satellite C650 - 1 CT does not recognize the CD/DVD

    Hello

    I currently have a problem with my model Toshiba C650 - 1 CT (PSC08E-03M001EN) satellite. The laptop does not recognize the CD/DVD and a check in the "Device Manager", said a damaged device driver!

    Now, my problem is that I searched on the internet and also on the websites of Toshiba for the right driver, but no use. The device (DVD) opctical no not also appears in the list of devices 'removable '.

    System details:

    Satellite C650-1 CT PSC08E-03M001EN
    OS: Windows 7 64-bit
    Place/country: United Kingdom

    Assistance in finding the right driver or advice how to solve the problem will be highly appreciated.

    Thank you
    Lamin

    Post edited by: jammehkunda

    As first step try please remove the optical disc drive from Device Manager and restart your laptop.
    After doing this review please the Device Manager and let us know if the problem persists.

  • External CD drive does not recognize the CD burned on El Capitan.

    Using El Capitan 10.11.5 and an external hard drive, I have burned successfully mp3 files iTunes CD - I can play on the computer itself - but an external CD drive does not recognize, even if the Player recognizes the discs once engraved on Snow Leopard and previous models.  What's wrong? I burn "at the fastest possible speed," as I have always done.

    What CD format?  If you burn it to a CD mp3 this is not very common for a standard CD player to be able to read those.  You may have burnt the other CD audio CD format.

  • drive does not recognize CD - R

    I have a HP Pavilion m8067c. Vista ultimate 32-bit, Roxio creator 2010. My dvd Lightscribe supermulti drive does not recognize CD - R discs. It will be label a lightscribe disc but ask to install a recordable disk with a new disk in the drive. DVD - r works fine. It started by not to recognize some CD, but now it doesn't recognize none. I check the properties and it shows the disc are full. If I try to format the drive, it gives the message that the disk is write protected. I tried to uninstall the driver and restart but still the same.

    res04n70 wrote: I have a HP Pavilion m8067c. Vista ultimate 32-bit, Roxio creator 2010. My dvd Lightscribe supermulti drive does not recognize CD - R discs. It will be label a lightscribe disc but ask to install a recordable disk with a new disk in the drive. DVD - r works fine. It started by not to recognize some CD, but now it doesn't recognize none. I check the properties and it shows the disc are full. If I try to format the drive, it gives the message that the disk is write protected. I tried to uninstall the driver and restart but still the same.

    Hello res04n70, it is possible the CD laser has become defective or even dirty, since you mentioned, he began to act gradually upward. The DVD has a separate laser. This may explain why the DVD works as it should.

    Ypu can consider replacing the DVD drive, because they are pretty cheap now. Some brand DVD players can be purchased for less than $20.00 USD.

    Here a link to NewEgg is where some of these players can be found.

    Just some thoughts.

  • Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

    Lightroom does not recognize any of my file types [DNG / JPEG etc] and is unable to import? any ideas for a fix?

    It's impossible. LR is a non-destructive editor and photo management. For her to not see images of the files would make it one of the worst of these programs tyupes.

    So there is a parameter that you have screwed up in the import dialog window that prevents your DNG, TIFF, JPG, PSD, PNG, CMYK and film formats appear in the import window.

    So show us a screenshot of your import window.

    More than likely you have chosen a destination that has all the permissions read/write to your username.

  • Satellite A100 does not recognize the new CD/DVD drive

    I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

    Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

    Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
    It seems to work, and the light blinks I think that it is not broken.

    I just plugged it because that's the way I was told to do.
    I need to download the drivers to operate?
    It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

    I'd appreciate any help. THX

    The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
    I think there bad master/slave/c-salt settings

    As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

    You can solve it only purchase a new compatible disc.

    Usually the ASP in your country could help you buy this disc of these guys here
    However, you can consult the user manual if there are a few details on the compatible sides.
    My user manual provides this information.

  • Satellite C50-B-131 does not recognize external hard drive

    I used an external hard drive to back up my data. Suddenly my laptop (C50-B-131) says it does not recognize the device. Any help is welcome. I tried to uninstall and reinstall the driver for the drive.
    Thank you

    Have you tried another USB port?
    The backup drive works on another PC?

  • Satellite A205-S4777 - XP does not recognize the HARD drive

    Hello!

    Recently I buyed a new satellite Toshiba A205-S4777 with Windows Vista home premium installed
    and I noticed too many errors in Windows Vista and the pc is very slow so I decided to downgrade to XP

    I want to directly install Windows XP but the installer does not recognize the hard drive or more exactly controllers!

    I nLite Sata drivers in Windows Xp Sp2, I bought on the microsoft.com site!

    Everything worked well.
    The Installer recognized fine hard and Setup finallased!

    But here's the problem when loading windows and try to pass on gorge yourself sort of blue screen one unreadable!

    And restarts and let, it does all day the same thing!

    I'm afraid that I have not nLite the right drivers.

    Is there anyone Heve downgraded this model?
    Thanx

    Hello

    Maybe you did not use good SATA driver?  :| Who knows
    The point is that there are two different versions of Intel Matrix Storage Manager supports different chipsets.
    I put t know what chipset is in charge of your laptop but you should check this and must also check the description of the Intel Storage Manager and check what chipsets are supported.

    In addition, you should have a look here in this doc from Toshiba:
    [How to integrate a SATA AHCI driver into a Windows XP installation CD | http://aps2.toshiba-tro.de/kb0/TSB85017Z0000R01.htm]

    Good bye

  • Satellite A30 PSA30E - BIOS does not recognize the HARD drive

    Hi all
    I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
    Does anyone no what I can do?
    Is it possible to restore the BIOS?

    Thank you

    Hello

    You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

    Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
    If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

    Please provide more info. You see error messages?

  • Vista does not recognize any disk in the disk drive

    Vista crashed when I was loading photos on a cd.  Since then every disc I put in - music, software, data are not recognized, it turns but no program starts automatically.  If I go in via Explore and click the drive the disc turns, then I get the message "Please put in a disc.  Any help gratefully received

    Hello

    Please make all below even if you have done some before as it is often the set of operations which solves
    the question.

    Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
    Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
    This will refresh the default driver stack. Even if the reader does not appear to continue below.

    Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
    slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    Hope these helps.
    Rob - bicycle - Mark Twain said it is good.

Maybe you are looking for

  • Satellite P300D - 15 c - software of 3D scanning is very slow

    Hi I am using scanning software 3d (www.david-laserscanner.com) on my Satellite P300D - 15 c with Vista. When I use the selection tool in the 3d window, it becomes very slow. It takes like 20 seconds to select a shape.When I run the program in window

  • T440s: Cannot set disk password in Bios

    I got a new T440s with a 256 gb SSD by Samsung. I would like to put a HDD password in the bios. But the menu item "Password hard drive x" does not appear on the page of the security-> password bios. All the other 'Material-password manager' menu item

  • Cannot get UB FunKeys to work on my computer says not compatible

    OK, so it is said that the ub funkeys is not compatible on my computer.  So I went to mattel. com and I downloaded the necessary software to make it work, but it keeps telling me that my hub is not connected when it is.  I downloaded something from m

  • Verclsid.exe taking 30 seconds to complete

    Various programs on my computer regularly cross periods do not respond for up to 30 years.  I have a correlation between these periods to the verclsid.exe process running.  When the process is complete (it disappears from the task list), the original

  • The user profile Service service is not the logon__User that profile can not be loaded.

    This happened yesterday after an update has been done on my computer by windows and I have no way to fix it.  I tried to call but the music on hold for just about drove me crazy with the garbled sound.  I need this computer.  I don't understand why w