Satellite M40X-129: fans works with a maximum return on Vista

Similar Questions

• Re: Satellite C660 - cooling fan work with a bang

  Hello

  Recently my computer laptop cooling fan started running continuously with a loud noise. When the screen is idle, it stops for a few seconds and start again. I changed the power balance in the Panel options, but it did not work. Even the BIOS is the most recent. Referring to discussion forums, I've changed to "selective startup" thru "msconfig" but nothing worked.

  He is 8 months old. The noise is very disturbing. Can someone please help me with this?

  Thank you very much
  Sammy

  Hey Buddy,

  > Referring to discussion forums, I've changed to "selective startup" thru "msconfig".
  I never heard of something like that

  Have you already tested it with cooling optimized battery method? Profile of balanced diet also uses maximum performance for cooling must change the power profile and choose the battery optimized for each profile on the battery and the AC adapter power / cooling CC. Information on all power plan options, you can find here:
  http://APS2.toshiba-tro.de/KB0/HTD84026Q0000R01.htm

  You wrote that your laptop is already 8 months old. You clean in the past?

• Fan works with performance of 100% from PSAY3 by Satellite P750-10 t

  Hi all

  I had a problem with my laptop.

  I bought this phone last week and I noticed a few unexpected stops due to overheating. Whenever I have turn on the fan works with approximately 100% of the performance, but when I finally in my OS (Win 7 64 bit as it was delivered) it stops to regulate.

  If I start to play games or greater than 1 Adobe product at the same time, it starts to become warmer.
  Whenever I check the temperature via Toshiba PC Health Monitor, it shows that the temperature is at a point of chritical but fan runs always with about 30-40% (80% shown)... is not even half as strong as it is after turning on the pc.

  I don't know what to do now? Will there be a Toshiba programs/tools to solve this problem?

  I tried Speedfan and other programs, but they don't even show my fans.

  Sorry for my bad English.

  Greetz

  Andy

  > I bought this phone last week and I noticed a few unexpected stops due to overheating. Whenever I have turn on the fan works with approximately 100% of the performance, but when I finally in my OS (Win 7 64 bit as it was delivered) it stops to regulate.

  I think that this happens because of the auto-off before.
  I think that the BIOS has noticed the condition of temperature before the laptop off and so the fan run faster just by turning on the device

  But he s strange that fans run faster while game or do a job with high performance applications.
  In my opinion you need the BIOS default and it should test with factory settings

  PS: you have the latest version of the BIOS? The most recent at the moment seems to be v2.40

• Power adapter for Toshiba Satellite M40X 129

  Hello guys,.
  hope this is the right forum to post my question in:

  I have a Toshiba Satellite M40X 129 (model No.: PSM4XE-01600CGR). My adapter is buggered so I need to get a new one. Bought the machine in Germany, now am in Tasmania / Australia. Being in a camp of the Valley remote until April, I won´t be able to go into a store with my laptop to try and understand, that the AC adapter / CC is suitable. We have internet here as our only communication, it is very important for me that sort.

  Can someone tell me, what type of adapter / power supply is planned or where to look?

  The one I ve been before is a LITEON, part No.: PA3432U-1AC3, model n °: PA-1750-09, input: 100-240V, 50-60 Hz, 1. 5 a, output: 19V, 3. 95 a.

  Thanks for your help and have a nice day
  Peter

  Adapters for your Satellite are:
  PA3432U-1ACA
  PA3432U-1AC3
  PA3432C-1AC3.

  Put this number in Google and you will find very precise specifications.

  By the way: If you already have the old adapter specifications I put t understand why you need some additional info. If there is no possibility to buy again until April, how do you get a new one?
  Sorry, but I m confused.

• Error and warning before and after the POST - Satellite M40X 129

  Hello

  I use a Satellite M40X-129, bought in 2005.
  After you have reinstalled Windows and all the necessary drivers (after more than 3 years, which was the longest time I used a windows ;-)) installation this afternoon, I meet the following situation when starting):

  (... check and all the stuff of ram...)
  Updated System Configuration data
  ERROR
  0271: check date and time
  WARNING
  0251: System CMOS checksum bad - default configuration used
  Press to resume, installation

  When I press F1 to resume, windows starts very well as I'm used to it.
  I can also access the configuration and need to update the time setting.

  Two scenarios:
  (a) the startup, shutdown, reboot: error message happen
  (b) setting the time, out of the bios with save the configuration, boot, very well until the stop/restart is required

  I tried to download the update of the bios to v1.60, but the configuration tool told me that this version is already in use and it will not progress.

  What I wondered: why is it happening? I don't think that the battery power is low, which was suggested to others in other threads, because it happened just after I installed the chipset/utils and other drivers from the toshiba download page.

  What can I do?

  -Bios update? -> Where can I find a new version? A tool (which I downloaded from a site linked to Phoenix Technologies) told me, there is an update for my Bios, but he wants me to join a subscription $29.99 / year

  -Swap CMOS battery? -> how remove m40x-129, tutorials? Don't want no f * ck it upwards...

  any other advice?

  Thanks for your help.
  Best regards

  Hello

  I think that the CMOS battery may be empty and therefore both a given in the BIOS is always changing the default value.

  Usually, you should be able to recharge this battery CMOS very easily.
  The user manual describes how to load this. Take a look at your manual

  As I m not wrong not the laptop must be ON and running and must be connected to the mains for more than 20hours.
  Then, the notebooks BIOS battery needs to be recharged again.

  Check it out!

  Good bye

• The product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista business product key

  Product key bad for the wrong version?

  Hello

  Recently the computer in business inherited from a friend, very fast and very good. Regardless of the operating system no - geniue, is with Vista Business, while the thumbnail of authentication is Vista Ultimate. I took a screenshot of what it says when I put Vista Ultimate product key: (it does not appear if you are unable to use it: P)

  http://S13.PostImage.org/57nfn5pqv/vistareg.jpg

  He said: "the product key you entered will not work with this edition of Windows Vista. You must run the Windows Vista Setup program or enter a Windows Vista Business product key."

  How would the installation of Windows Vista? My files would still be there when you need him? My drivers would still exist? No matter what to get deleted or become unusable? He would return to SP1? Any response is welcome.

  You can order form of the manufacturer's recovery media.

  The reason why the system as non-authentique shows currently is using a license in Volume KMS - these licenses must be re-activated at least every 6 months by connecting to the KMS user license activation server.

  It will require a reformat and reinstall whatever you do, unless you can connect to the KMS - Volume media server cannot be upgraded under normal conditions.

• "The product key you entered will not work with this edition of windows vista. You must run the windows vista Setup program or enter a windows vista product key. »

  I bought a laptop HP three years ago in Dubai, now I am in India, my family problem does not activate windows vista and also use it now, I try to use but asked the system to activate product key not found the product key at the bottom of my laptop I enter the product key but the system says "the product key you entered will not work with this edition of windows vista.»  You must run the windows vista Setup program or enter a windows vista product key. "In my company sticker a HP laptop, it says" Windows Vista Home Premium, also found in computer ownership 'Windows Vista Ultimate' and as low property said: you must activate today and return their product ID: 89580-014-0000025-71152, but in my laptop near the product key, wrote a different number which is "89580-014-0000025." what is the problem and how to solve that advice me please. ""

  Hello

  You can use this Recovery Partition to reinstall Vista to his new condition with the right edition of Vista.

  This recovery partition was photographed on your hard drive by HP during the manufacturing of the factory.

  You press F11 on startup to start the process of recovering back to factory settings.

  Here is the information about HP.

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  If the recovery partition is damaged, you can buy HP's Vista recovery discs for a small fee.

  If HP's Vista recovery disks, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon

• Satellite Pro M40X does not work with battery

  Hello

  I have toshiba satellite pro m40x laptop. It haves apromaly 11 months.
  In recent weeks, the laptop does not work with the battery.
  With the battery and the power running, if I turn on the laptop, it turns off after 10 seconds. If I only turn the computer batteries, laptop not respons.
  The laptop works without battery.

  I have rma is not the portable and the technical suport fixed the battery because it only 6 months guarantee.

  I'm sure that battery modules were not upset because I used the battery not very often.
  I disassemble and I wached the control circuit. I'm sure that something of them, it was broken, but I can't fix it without the schema.

  Another question is if I can change the graphics card to laptop. Is actually a x600se but I need power more graphic

  I hope you can help me

  gretings

  Hello

  It is not easy to say what the problem is here. Have you noticed something strange with LED power control? It is also possible that the electronic power supply do troubled. Try to talk with authorized Toshiba and explain the situation. If you open only one Notepad, uneducated, it may be simply worse.

  Graphics card cannot be updated as on desktop computers. I put t know how it is on this model laptop but the graphics card is fixed on the motherboard and cannot be traded.

• My Satellite A100 GPU fan works 100% all the time

  First: I have the Satellite A100-440 with GeForce Go 7300 and XP Professional (and Ubuntu).

  There is something wrong with thermal control. The first PC Wizard has always shown that the temperature of my GPU is "a very large number" and the fan is runnign 100% all the time (the main problem). Then I installed ATItool hoping he would show the temperature correctly. Well, it worked in part. Now when I check the temperature with PC Wizard, it indicates the temperature of the GPU normally (like 30-40 degrees celsius), but it also shows the GPU Diode temperature it's "a very large number" (as 4.294967E + 09 C) and the fan will operate at 100%.

  I tried to control fans with RivaTuner, but nothing happens.

  So if anyone has an idea how I could continue to solve the problem, I would be very grateful. I don't know if the problem is with the hardware (I could take this service) or with the software...

  Thank you!

  Post edited by: Avilja

  Hello

  Why are you talking about 'problem' and 'solve this problem?
  I see no problem!
  First of all I'm not all 3rd party applications that monitor temperatures. I'm not 100% sure if these applications provide a good values.

  However, as far as I know the laptop was shipped with Vista and not XP and Linux. You do not use a factory settings. It seems that you have set up the laptop with new applications and you should know that all the software installed and running insists on the CPU and other parts.

  BIOS fan table supports different temperature and cooling of the speed measurements. This means that if the temperature rises to a higher level, the cooling module starts and tries to decreases the internal temperature.

  Usually the temperature depends on the use of the laptop. If several processes of the OS are running in the background, that the CPU performance are high, the temperature rises and the fans start to run. There is nothing unusual about it.

  Furthermore, the dust and debris inside the laptop might have a bad influence on the laptop cooling. From time to time, it is advisable to clean the cooling modules.

  Last but not least the laptop must be placed free on table to ensure the circulation of air correctly. Don't forget that there is enough free space around the laptop.

  Finally, I must say that one of my friends has an A100 and the fans run correctly.
  This means that the cooling modules works with maximum performance while playing games or using graphics software.
  However fans do not work with maximum performance using only common programs like IE software or office.

  Good bye

• Equium M40x does not work with connected AC

  Hi all

  I have a laptop Toshiba Satellite M40x-189, there little about 2 years and recently I have problems with it.

  The laptop when it is connected to the Board, the green light appears, but after 5 seconds it laptop turn off. the looks of dead battery, because it does not load normally, I keep connect and disconnect the AC, so that the orange light appear sometimes, sometimes for 5 seconds only. It's frustrating. When the drums come to start getting free he takes forever to be full. just at the moment where there is a load on the battery, that I can work on the laptop, even with the connected AC, but instead to use the AC laptop running on the battery, which usually lasts less than an hour, and then it's the bit of history.

  All I need is just to work with connected AC, because I normally just use the AC.
  Well I don't know what the problem is, can someone help me please

  Hello

  For me, it looks like a problem with the electronic power supply on the motherboard.
  I don t think that there is an adapter of wit AC problem itself or with the bad connection between the power supply and the Commission.
  If the AC adapter would malfunction the battery would not charge. But charges of battery, it collects a very slowly but it charges

  Finally I n t think you can do something you go to the service of your country. In such cases you re on the right side

• Satellite L50 - B fan works even if the CPU load is very low

  I recently bought a Satellite L50 - B and I made a Windows 10 updated. The problem is that the fan works even if the CPU load is very low and the noise bothers me a lot.
  I ordered the video card driver and the system tells methat driver is updated to the latest version.
  I don't know what I can do to change this sad situation.
  Please, please, could you help me solve the problem?
  Thank you very much for your support and understanding.
  I await your quick response.
  Thank you.
  Giovanni Spina

  What CPU temp? Probably overheating?
  Try to replace the thermal interface on the CPU. ;-)

• Satellite A660-10W - fan works too

  I had my A660-10W 10 months. Recently the fan suddenly turn a lot, whereas previously it was quiet. I don't do games, I just write and browse the Internet or watch a movie. The fan works now, 69% always, very often 90% and temperature show 54 or 64.

  I would like to point out the fan does not like this before, so I'm worried that it will cause damage.

  Thank you.

  Hi Bedouins,

  Are you currently using another power plan or have you changed something on the cooling method? From my own experience, I can say that if I use the Eco mode there are much less active fan. If the laptop is quieter and it safes a little battery.
  If you use the power balanced Windows profile, it uses the method of cooling a maximum performance. If the fan runs more often.
  In most cases I use the Eco mode to surf on the internet because it s enough.

  In addition it s advisable to clean the cooling system from time to time using a jet of compressed air.
  Do you have already?

• Satellite M40x-129: how re-activating touchpad before you connect

  Hello.
  It seems that the function (Fn + F9) to activate the touchpad does not work before opening a session on windows.

  I use the original utility on my m40x 129.

  Hi locus

  As far as I know all the tools and services are active after full OS start and FN + F9 will not work before the registration of the user.

• Satellite U400D does not work with dockstations!

  Hello

  I'm now looking for laptops for the home, and I want a template with docking station, because it will be my only PC. And I want to have comfortable workplace (screen + keyboard + mouse) + some periphery.
  I don't want to mess with wiring whenever I take for laptop in another room or outdoors, but still I need portability, and I don't want all my data with me and do not compromise in computing power. I'm looking for models 13 inches, because they have dimensions of the standard paper and adapt easily to any bag.

  This is a PROBLEM! Toshiba has big 13-inch models U400d, which perfectly suited to my needs, but without no docking station.

  I discovered very few cell phones may work with dock stations and are for the most part, these laptops 15 "and above corporate models (parts of USB, as Dynadock don't count - he has weak graphics and can not run edge all together, although we'll see what happens with USB 3.0).

  Dear Toshiba, give full support dock stations (for example taking the PCI bus) your lines of book HOUSE, as the series of satellites?

  PS why I want to continue with THAT and only for laptop:
  -I don't want to lose time sync my data back. Hard drives are so huge and have so much data on them, it's a real problem. Therefore, the PC more you - is the biggest problem.

  PPS maybe dynadock with USB 3.0 could be a solution - if it would offer a choice of options of graphics chip. My Dynadock, which I bought with U400, couldn't read clips from Youtube and provide errors accepting the ADSL router Ethernet stream. I had to return the two products to the seller.

  PPS another problem is that no one book has IPS display (with 10-bit color). While SLR cameras have 14-bit color ;-(

  Thank you very much.

  I'm guessing that adding a docking connector would add too much fees for Satellite models, more than 99% of users will probably not use a Docker anyway.

  But there are some models that have a docking connector, Satellite Pro S300 (at least on the models I looked in google).

• Satellite A300-1LI - HDMi works with the video but no sound on LCD TV

  Hello

  I am the owner of a Toshiba Satellite A300-1LI, operating system Windows 7 Ultimate edition. I connect to the laptop with my Bravia KDL-40W4500 and the video is ok but the audio didn't come from the laptop not the TV.

  When I had Windows Vista everything worked well. I downloaded the drivers to control HDM for W7 (2.0.0.1) but still does not work.

  Any ideas?

  Concerning

  Hello

  Have you changed any settings in the sound properties of playback devices?
  I have a BRAVIA 32 LCD TV and I tested with A300-1LI and Satellite A500-157.

  With two laptops, it works well but not with the default settings. What I did is to enter the playback devices and I disabled all listed devices it except HDMI digital output device.
  To do this and start an audio or video file, and check again.

  Please let me know if it works for you.