Satellite M40X-149 does not have wireless network

Similar Questions

• Re: Satellite C660 - 29G does not detect wireless networks

  Hello.

  I own a SATELLITE C660 - 29 G PSC1LE, bought in Spain.

  Once shaped my development pc, I installed Windosws 7 64-bit.

  As I lost the DVD attached to the purchase of the laptop, I have downloaded all the drivers for my model based on the Toshiba site

  I installed all the drivers and the thing is that the wireless card is most recognized. I can´t see WiFi available.

  I connect to the laptop with a cable to get access to the internet and it works properly.

  Could you please help me?
  Thank you.

  You can first test what is the status of the WLAN card in Device Manager?
  Wireless network adapter installed and registered correctly?

  If yes do not forget the wireless network card is enabled.
  Please check and post comments.

• Satellite Pro P300-1AY does not see wireless networks

  I have a Satellite Pro P300-1AY and the unit does not see wireless networks.
  I replaced my card and it does not solve the issue.

  I set up another type of card and those who work well, it is only when I get an Intel 5100 (512AN_MMW) the unit does not see any network.

  I use win XP. Any idea?

  Hello

  You have the latest version of the BIOS?
  If this isn't the case, then you should first update the BIOS!

  The latest version of the BIOS is on the European driver Toshiba page and it can be modified running Windows OS.
  As far as I know, you must use 2.5 or later version BIOS.

  Check it!

• Satellite L500-13z - Windows 7 does not recognize wireless network adapter

  Hello

  The Windows 7 RC Device Manager does not recognize my wireless network adapter (for example: Atheros, Intel or Realtek). I tried to install all the Toshiba support drivers, but none of them work:

  After installation, they ask me to connect the unit to my computer (of course it is still on the motherboard!).

  =>, Is there a way to know what is my Wifi adapter?

  that one failed: http://aps2.toshiba-tro.de/kb0/HTD7201PO000SR01.htm (this is the only Word to say "network adapter" with a yellow exclamation point).

  -Online someone knows when will be released Windows 7 drivers on the website?

  Hello

  Before you begin to install all drivers WLAN you can find on the Toshiba site you must make sure that wireless network card, you have exactly. You can check in the Device Manager-online properties-online Details of the local network adapter device.
  Need you an information like PCI\VEN_XXXX & DEV_XXXX

  If you have based this information you are looking for with these terms on this site in order to determine the exact WLAN card:
  http://www.PCIDatabase.com/

  After that, you can download the driver appropriate for your laptop. Before installing, you must uninstall all other versions and restart the laptop.
  Also, make sure that the WIFI is enabled with the hardware switch and FN + F8.

  Welcome them

• Why Satellite L300-10 q does not recognize wireless network

  This new laptop works well on a wired LAN but does not recognize a wireless local area network. Received the message no network found. In the same room with another PC laptop Toshiba the wireless LAN is located and has good signal strength.
  The wireless LAN switch is on and the 'antenna' pictogram led burns red.

  Seems that it is not configured for detection. No idea how to solve this problem?

  Hello

  You´re sure you checked all THE settings? I mean, if the local wired network works and the wireless is enabled, you need to check all the parameters available that could be done. One idea would be to check the L300 on another access point to make sure that the problem persists on different brands of wireless routers.

  Please check this first and make sure that your settings are all on "automatic" so if you do not find the reason, come back and we will try to find another solution.

  Welcome them

• Satellite L500-207 will not find wireless networks

  My laptop cannot identify wireless networks at all and I don't know how to fix it. Everything works fine and I'm aware wireless is turned on and anti-virus scans were clean.

  First of all, the problem occurred after I have reset default DNS for the DNS to google so I wonder if this is what caused the problem.

  I would be very happy any assistance that could be given in the resolution of this problem.

  > My laptop cannot identify wireless networks at all and I don't know how to fix it.

  Does that mean exactly? You can see your WLan or you see another WLan in the neighborhood?
  If you can't see any WLan then this means that the card wireless network is not correctly enabled in this case use FN + F8 to activate the WLan.

  In addition, check the settings of TCP/IP to the wireless network.
  In Protocol TCP/IP properties, you can find the settings as all these parameters must be set to automatically assign the IP address.

• Satellite M40X-112 does not start correctly

  Hello

  I have a similar problem with my M40X-112. After pressing the power button, th sbutton turns blue, the fan starts
  rotation and after a few seconds, the fan stops and nothing happens (no starting, no noise, nothing).
  In one of the 30 tests I can see the start screen and also made to put bios in twice, but after
  a few seconds, the screen goes black and everything crashes. At any time the blue light of the switch
  lights and all three green lights in the front of the laptop are on.

  The CMOS battery is empty? Why should remove the battery and AC help in this situation? Due to workload
  24 hours with laptop turned on aid (see http://forums.computers.toshiba-europe.com/forums/message.jspa?messageID=145557#145557)?

  Thank you very much in advance for advice.

  Marc

  > Is the vacuum battery CMOS? Why should remove the battery and AC help in this situation? Made load for 24 hours with laptop turned on help
  I don t think that the battery is empty. Your description does not sound like a battery problem.
  If the CMOS battery is empty then the laptop could start but only the date and the hour would set the default

  So I think that the problem could be linked to more than a motherboard on the question of CMOS battery problem
  I think we can discuss the anomaly and we say what part might be bad, but finally it would be only a hypothesis and won't really help to know exactly what's wrong.

  So I would say you should ask for verification of the material an ASP.

• Satellite M40X-119 does not start - 4 beeps only

  Hello..

  I have Satellite M40X-119
  When I press the power button, the blue light comes on and the fan starts and then only 4 beeps
  (Beep - beep - beep - beep) intreval approximately 1 seconds. and then nothing happens!

  I replaced the RAM with a new one... but still the same

  any advise?

  Hello!

  As far as I know the Satellite M40X has a Phoenix BIOS.

  Phoenix BIOS, there is no code 1-1-1-1 (beep-beep-beep-beep).
  I think it is 1-1-2-1 or something else.
  Here is a list of the different beep codes:
  http://bioscentral.com/beepcodes/phoenixbeep.htm

  If you replaced the RAM, I think that there is something wrong with the CPU or the motherboard.

  Good bye

• On Satellite M40X touchpad does not work perfect

  Hallo

  I can still move my cursor with the touchpad, but when I key touchpad with my finger to open or select an item that no longer works. The two buttons below the touchpad working ok. I tried to reinstall the driver but it does not solve the problem.

  Thank you

  Hello

  First, you need to check the settings for the Touchpad in the mouse properties
  You'll find Advanced tab use the advanced feature
  Now you should see a lot of settings that are responsible for the use of the touchpad.
  Do a preview. If all the settings are ok, well in my opinion, the touchpad is broken and you need a new.

  In this case, you should contact Toshiba service in your country.

• Error Msg: this computer does not have a network installed or set up wirelles adapter

  • OK Please tell me too much to turn the switch on the front of my computer (or blue) lil... hahaha im not a fool... no matter what remains orange... my mini hp netbook picks up my router Verizon signal wireless perfectly well... I just installed Windows Vista Service pack 1 (which could be the problem), but I doubt that windows would be throw out there a patch that would do this... I looked to see if the network adapter has been disabled, but it is not
  • I went in comand prompt and typed sfc/scannow and it cam with no breach of integrity
  • I have a hp Pavilion dv6000 and am running windows vista Home premium... Please help

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon. Try using a wired connection or download
  pilots on another machine and transfer on removable media.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Unable to connect to the Internet, error: this computer does not have a network adapter installed and configured

  Original title: basic computer.

  I have a Dell with windows vista. He has been in place and slow so I reinstalled the program. Now I can't access the internet. I get an error message that says that this computer has a network card installed and configured. I have a linskeys wireless router and we have two laptops that work very well. Don't know what else to do.

  Hello

  Go to the Dell website and download the drivers for your model computer.

  http://www.Dell.com/support/drivers/us/en/19/DriversHome/NeedProductSelection?FKEY=Drivers_PS

  Use one of your other machines > download and save the drivers, network adapter, etc > copy of Flash Drive > transfer and install them.

  See you soon.

• Satellite M40x-112 does not start

  Hello
  I have a problem with my old laptop M40.

  Last night it just turned out. First I thought it was overheated, as sometimes before, but until this morning, it won't start again. If I push the Start button it starts booting (I hear the HD) but only for 3 seconds, then there's no noise and nothing on the screen but still shines the light around the Start button. Weird.

  I tried to start without battery, only by cable, but that no longer works. Where ANY smell like something burned or so, I know not what happened. But I need my data.

  Would be cool if anyone knows help!

  Try to remove the battery and unplug the AC of the notebook adapter. Wait at least an hour and connect the AC adapter and the battery. Try restarting the laptop and maybe it works.

  Moreover, so save your data, you must start the laptop. If you have an external USB enclosure you can put your HARD drive in it, and then you can save the data on another computer or laptop.

• Satellite P200: Vista does not have a bakup

  Hello

  From time to time my Satellite P200 will not make a backup. It gives an error message after almoust 10 seconds.
  But when I'm not really using my laptop, it seems that it takes an automatic backup.

  To be sure, I'd like to reuse Thrue image with a Sata HD

  Anyone with experience with this?

  Thank you

  Luke

  Hello

  I don t use the True image software and so I can't provide any solution 100% for you problem
  But I ve goggled a bit and it looks like a new patch and update is available for Vista support eventually it s a software bug and so the image creation doesn't always work.

  PS; I use the ghost and this software is really a good solution if you want to create clean images.

• Satellite A660-18 does not have upgraded the BIOS to v1.90

  The BIOS upgrade notice came in the Toshiba Service Station program and I downloaded the new update of the BIOS and pressed the button "install". The program extracts and ran but then stop saying:

  Installation of UEFI WinFlash 0.02 in the title bar

  + "The program will be closed! +
  + There is an error occurred, please check below Articles. +
  + Version of the BIOS above 190. +
  + Plus 10% of battery capacity. +
  '+ AC is attached. +

  Obviously, the battery is fully charged and I'm running on AC. If I start up the computer and go to BIOS F2 screen, it reports as v1.80.

  He reports the BIOS version as something akin to garbage in Toshiba HWSetup program:

  V234567890. 00/00/00000000000

  He also pointed out what is called the CBS Version as "1.80".

  Anyone else have problems to install the new BIOS (published on 25/01/2011) v1.90?

  And you are using the original operating system preinstalled you got with your laptop?

• Satellite L30-149 - does not start with the new RAM modules

  I bought RAM Kingston 2 x 1 GB modules. When I put a single module in my notebook - everything works fine. When I put the two modules - BIOS freezes and cannot start.

  I tried to combine my old module of 512 MB with 1 GB of Kingston, but in this case laptop detects only more great module (Kingston). So, I'm stuck with only 1 GB of RAM. In my notebook BIOS version is 3.10, and it's the last. I tested RAM modules in a laptop and each of them works fine.

  What should I do now? Help, please!

  Download and run www.memtest.org Memtest to test these Modules one by one.