Satellite M45 - Missing/Bad OSB logo at startup

Similar Questions

• Satellite M45 - logo error bad/missing OSB

  Hello...

  I'm having a serious problem with my laptop

  When I turn on my computer, the toshiba logo appears with an error message in the upper right corner that says: missing/Bad OSB logo.
  And that is, the computer has frozen, I can not even access the bios...

  Could plese someone help me?

  Thanx

  Hi Kelly,

  The logos of the BIOS stand on the CMOS chip on your motherboard, your display will show an error message may indicate that you CMOS chip has developed a fault which needs to be re-flashed the BIOS. If you are unable to get the OS to load after the BIOS screen, you get the BIOS flashed by a Toshiba authorized Service partner.

  You may also like to try = pass the screnn LOGO by pressing the ESC key as soon as you pressed the power button. This should show that then it the BIOS load progress.

  Kind regards

• Satellite M45 hangs after startup

  Hi people,

  I got by Satellite M45 and it's almost 3 years, I use it. Now he started to gel after starting. So I formatted using the recovery DVDs, even now he kick survey and if I click on the start menu it freezes.

  Someone has this kind of situation? Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  Thanks in advance.

  Hello

  > Is this hard drive problem? What would be the best solution to do this, change the HD, RAM?.

  You must understand that no one will be able to say exactly what's wrong.
  Several tests are needed to find the fault.

  If you reinstalled the operating system on the HARD drive and then I n t think that the HARD drive would be malfunctions.
  I had a similar problem on my 6 year old laptop. Laptop computer frisotté after 2 min.
  After a long investigation, I discovered that one of the memory slots would be defective, because the two modules worked correctly in another location.

  Of course, in your case, it could be a failure of memory but it's only a suggestion or suspicion. You know

• Satellite M45: Windows XP does not start when you click on the user name

  I have a portable Satellite M45 in XP service pack 2.
  After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.

  I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.

  The next day, I'm back to square 1 and cannot log in again.
  It starts in safe mode, but I don't know how to start to solve the problem.

  Can someone advise please?
  Thank you

  It's very strange!
  Have you removed any spyware or Trojans?

  Question you is really, really strange, and I guess that the 'bad' software causes such problems...
  It seems that something changes that replaces Userinit.exe.

  A similar question has been described here in the MS knowledge base:
  http://support.Microsoft.com/kb/892893

  It seems that some registry have changed and that's why the connection does not work correctly!

• Satellite M45: Smart Media Card Reader SD does not

  Hello

  I have a Satellite M45, computer laptop, and for some reason any SD Smart Media system does not work. The Bay is attached to the laptop, it is not an external drive. I insert the chip SD, 1 GB or 512 mb not load disc, it, or show no signs of him being even in the computer.

  However, I see a blue light next to the Bay that happens when I plug a disk in it. But it reads nothing for some reason any. I tried already (repeatedly) to re - install the drivers, and then restart the computer, but nothing happens I get the same bad thing.

  You have and suggestions or ideas that might solve this problem of mine.

  Hello

  You you connected this external Bay USB ports?
  Did install the drivers for this external device?

  After the driver installation, please check the Device Manager if the external device appears.
  In addition, you can try to disable the option allow the computer to turn off this device to save power in the USB root hub properties.
  This you will also find in Device Manager

• Satellite M45-165 - card wireless network not visible

  Hello world

  I am pleased to join this forum. I have trouble with the map on Satellite M45-S165 wireless. My friend has a M45-S165, he lost the recovery disc, I haved high new Windows XP SP2 but when complete the Windows Setup, the wireless card is invisible, like this:
  [http://i1023.photobucket.com/albums/af358/lonesomeboy/Anh%20hoc/wirelesserror.png]

  I do not have ' known reason, can you help me solve this problem? Thanks in advanced for any help

  Hi lemon tree,.

  Have you checked the Device Manager If WLAN card is on the list? Maybe just the driver is missing, so it s not listed in network connections.
  More recent WLAN driver download on the official website of Toshiba.

  By the way: why you installed SP2 only? There is already a SP3 for XP it is important because it corrects a lot of security problems.

• Satellite M45: Can I do recovery without disk

  Hello

  My DVD player does not work because of the VCD virtual drive program. (I hate this prog)
  When I try to uninstall Virtual VCD, everything goes crazy and no executable can be run.

  So I have to install the original image using the image on the HARD drive.
  I did dozens of times on other laptops (CTRL + F11) but I could not know how I can do it on my Toshiba Satellite M45.

  I appreciate your help
  Thank you

  > Can I do recovery without the disc?

  What to say I created a clean image of the operating system file using Norton Ghost utility and saved this file on the second partition.
  In this case I can still use this image file to restore the C partition any and I do not need the recovery CD.

  I ve made a good experience with utility Ghost and in my opinion it s one of the best tools to create images and backups.

  Best regards

• Re: Satellite M45-S169 - need driver for Ethernet controller

  It has always been used with wireless, but not go now. Got the main due virus reformat and reinstall XP Professional. Everything's fine, everything works, but found a yellow flag in device manager for the ethernet controller. Have tried all the drivers available, nothing helps. Help me here, please.

  The wireless light is lit on the front, suggestions.

  Thank you

  You should try this wlan driver page:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  or

  [Satellite M45-S169 pilots | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1130627& rpn = PSM43U & modelFilter = M45-S169 & SelCategorie = 3 & selFamily = 1073768663]

• Satellite M45: After Norton "Go-Back" facility is more primer

  I loaded Norton 'Go Back' on my Satellite M45 with the result that it will not start.
  I tried running the recovery without success disck receive the following error message;
  "Load error - press any key to restart."

  Can anyone help?

  HI Mike,.

  Check out this article on the Symantec support site. It seems to be similar to your situation.

  http://Service1.Symantec.com/support/GoBack.nsf/docid/2001101713193807?OpenDocument&src=hot&SEG=HHO

  Kind regards

• Satellite M45-S265 does not recognize WLAN adapter

  I just restore my computer and it does not recognize the WiFi device,
  I tried with the support from Toshiba but I couldn't find an answer, the switch is on but I do not have the Green ligth and in the network of connections is not appear.

  Could you tell me how I can implement this feature? or check the hardware?

  Is a Toshiba Satellite M45-S265

  Thank you

  You see the device wireless in Device Manager?

  Its drivers are installed correctly?

  If the driver is installed, try to disable or reconfigure your firewall

• No sound when playing video from iTunes on a Satellite M45

  Hello
  After trying to play a video from iTunes on a Toshiba Satellite M45, the entire sound system is out. I think there is something wrong with the audio drivers or not can not be detected. I am new to the PC World and will appreciate any help in easy to understand terms. Are there destinations where I can download a new driver.

  I need push madness seeping in. Thank you.

  Caden

  Hello

  I think that you should first check device manager if there is no yellow exclamation next to the sound card.
  If yes could help reinstalling the sound driver.

  It seems that the laptop was designed for the American market. (because of the 5 at the end of the number)
  So I think you should take a look at the Toshiba site us updates of pilot.

• Satellite M45-S355 and DVD burning

  I have a Satellite M45-S355 laptop and never tried to burn DVDs so far. I know it's a rug * a pilot/burner UJ - 831 s.
  I am not able to find any DVD x 16 for their speed. How can I burn on these types of DVDs?

  When I try to format a disk, etc., the computer says that the CD/DVD-R are not supported by this version of DLA.

  Any help would be great!

  Hello

  If you want to burn data to DVD then I would recommend using a 3rd party software like Nero burning ROM
  I use Nero and I got m.

  Also I recommend you to check the registry and to remove the Upperfilters and Lowerfilters values completely from the following registry key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Finally and most importantly you can use DVDs that can be engraved with a higher speed, but I recommend the DVD with the lower speed burning I do with 1 x speed.

  See you soon

• Satellite M45 won't start at all

  Greetings! My Satellite M45 seems to be really sick! It started a while the battery dies slowly, and finally, the laptop would refuse to go into the BIOS to the battery power.

  I ordered a new battery (which I'm still waiting) and continued to use the computer laptop external power, but every now and then, he would refuse to boot from an external power supply.

  When you press the power button, the screen 'TOSHIBA Touch with tomorrow' arrives - but with a problem - then crashes (with the fan). The problem (other than the hanging), is that the screen is 'moved' to the left. Rather than fill the entire screen, the start screen "ignores" the rightmost 2 inches and a half inch low and appears in the rest of the screen. Its a little hard to explain...

  This morning, refusing to boot at all!

  Any ideas? I tried to reinstall the ram, turn on/off without battery, only on the battery, I have removed all the 'extras' and am quite a loss now!

  I can't go to the menu of the bios either - so its very frustrating!

  Any help would be great!
  Michele

  Hello

  This s a shame! Description does not sound you well ;(
  For most hardware is malfunctioning if the laptop is unable to successfully pass the TOSHIBA Touch screen with tomorrow!
  Seems the POST (power on self-test) failed!

  I think that there's not a lot to do! The laptop must be professionally checked by an authorized technician. Guys might start and run tests from diagnostics and could locate the source of the fault.

  Call the ASP in your country and describes the history and details. I guess you will have to send the laptop to the service provider authorized ;(

  Good luck

• Power calibration error - Mat * a UJ - 830 s drive Satellite M45

  Hello!

  I have a problem writing files on my carpet * a writer uj-830 s. My laptop is Satellite M45. When I try to burn a CD or DVD in nore or dla, it gives the power calibration error.

  I'm sick and tired of this!
  Can someone help me please?

  Hello

  Power calibration error is known to me and revealer of truth he s just doesn't sound right.
  For the most part, this message appears if the lens of the player is unable to calibrate in the right position.

  The goal must always be calibrated before you start read or write the middle.
  If this procedure fails, the drive is not able to manage the CD or DVD and get the power calibration error.

  Frankly, in most cases, the drive needs to be replaced, because AFAIK this dysfunction is not repairable.

• Satellite M45-S355 boot cannot from the CD

  Hi, I have a Satellite M45-S355 laptop.

  When I try to boot from the cd... He spent the cd splash screen and starts windows normally... DVD player does not turn... Reading CD, DVD...

  And also, I try to boot from external DVD - drive... But I did not boot from this drive too... And also I have no boot from usb because this computer does not support boot usb :/

  What can I do? Do not change your computer =)

  I'm waiting for your media... Please help me...

  (But I also have to say that I was starting the cd/dvd drive... But a year ago my CD/DVD drive not read CD only DVD playback... And I gave my computer to Toshiba and they changed the DVD player... After they changed the drive, the drive can read CDs and DVDs but now it can't boot from cd).

  Hello

  Maybe just this particular recovery disk can not be read by the CD/DVD drive.
  Copy/burn the recovery to another disk drive that can be manipulated buy the CD/DVD drive.
  I had good experience with R TDK discs.

  Use another computer to copy this disk and then try to start using this new disc

  Good luck