Satellite M45-S169 - overheating and the upgrade card RAM/graphics

Similar Questions

• Satellite L500-1ZP - key to enter the BIOS version 2.10 and the upgrade of RAM

  Hello

  I have two questions:

  1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  However, it seems that I can't enter the BIOS more.

  I tried several buttons, but it just won't let me get bios of the laptop more.
  Which button to use to access the BIOS?

  2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  Are there recommended RAM sets should I use because of compatibility issues?

  Thanks in advance for any help.

  Kind regards.

  > 1. I recently updated my bios version of laptops to 2.10 and replaced the hard drive with an SSD.
  > However, it seems that I can't enter the BIOS more.

  To access the BIOS press F2 at the beginning of the order started immediately after you have switched on the device, press F2 (press several times on the line)

  > 2. I want to upgrade the standard amount of memory from 4 GB to 8 GB.
  > Are there any sets recommended RAM should I use because of compatibility issues?

  Toshiba Satellite L500-1ZP laptop takes the type of RAM SODIMM SDRAM PC3-8500 DDR3-1066 MHz 204pin. I would recommend the manufacturer Kingston modules.
  Value report great price

• Satellite Pro M10 overheating and the fan runs loud

  I have a Satellite Pro M10 and when it is the fan on the power grid comes shortly after the start and makes a horrible noise - this has only started happening recently. I tried spraying compressed air (dust) to the air outlet and still have the same problem.

  Other postings say to clean the fan, but I don't know how to access it. I'm worried about overheating problems I work in Africa much of the time and the laptop is subject to hot temperatures.

  Hi Hannah,

  The easy way to clear the dust and debris from the cooling system is to use a vacuum cleaner hose placed on the admission air grids that are usually in the bottom of the laptop (covered by a grid). For maximum effect, I usually place a rag around the pipe to maximize the flow of air through the fans.

  This causes air suction through the radiator CPU the wrong way and ensures that all debris are not pulled into the heatsink, but are removed by fans. You can see a ball of down under the grates that you need to try to clear little by little.

  This technique will not void your warranty since no disassembly of the unit is necessary.

  Kind regards

• Weird Audio problem since installing new SSD and reinstall the OS and the upgrade of Ram

  I have a really strange problem in first (well the same thing happens with native files outside the first he too!)

  Some of my corrupted .wav and .wma audio files. At first I thought it was a buggy project file.

  Then I checked some other files of the projects waiting to be done and they were the same time of a heart attack.

  So I copied the apparent bad file to my laptop and it plays very well!

  Then when I check some audio files of the projects finished on my PC they sound corrupt too! And of course, they were very nice when I actually finished projects.

  I have tried in the first CC2014 and CS5, but it is not the program that I know now.

  I googled "Audio codecs Windows7" but all the options appear to be malware, someone has any ideas? Y at - it a codec pack that I could try?

  I am running Win 7 Pro

  I7 960 @ 3.2

  24 GB ram

  NVIDIA GTX 480

  Thank you

  Ronan

  Had this sort.

• Inspiron 1525: The upgrade of RAM & graphics card

  I plan to buy an Inspiron 1525 with the least amount of RAM I can get, so that I can add RAM myself to save money. So how many slots memory will be a 1525 comes with? How many of them will be resumed if I order it with 2 GB of RAM? With 3 GB of RAM?

  
  

• Satellite A200-1AX - overheating of the graphics card in Windows 7 64 bit

  Hello.

  Model of my laptop Satellite A200-1AX possessing a Mobiliti Radeon 2600 video card.

  After installing Windows 7 64 bit can't find the correct work display driver.
  Fan does not work quickly, by the suite and heavy applications is overheating and the laptop is turned off.
  Not able to find a driver for Windows7 64 bit or Vista 64-bit for my card on the Toshiba site.

  The site of AMD.com a driver for Radeon 2XXX series:
  Windows 7-64 bit ATI Catalyst a? ¢ Display Driver Version: 9.9, Edition Release
  Date: 09/09/2009. -Drivers do not help.

  I tried to increase the fan speed you programs 'ATI Tray Tools', has not helped.

  Please help me with my problem. Sorry for my English

  Hello

  The drivers of Toshiba laptops are a bit different and not the same thing as the drivers from the manufacturer of the graphics card.
  The original ATI drivers are made for office use and not for mobile use. Drivers Toshiba takes supported thermal protection that allows to control the performance of gpu and the dissipation of the heat.
  If you want to use a page ATI driver then your GPU could create more heat as usual which leads to the unexpected shutdown.

  I installed Win 7 on my A210. I didn't install the driver of ATI graphics card because the Win 7 automatically recognizes the graphics chip.
  After installation, I went to the Device Manager. Then, I chose the graphics chip and looked for the driver automatically. Windows has found the right driver and installed this
  Since the unit works perfectly with Win 7

• Re: Satellite M45-S169 - need driver for Ethernet controller

  It has always been used with wireless, but not go now. Got the main due virus reformat and reinstall XP Professional. Everything's fine, everything works, but found a yellow flag in device manager for the ethernet controller. Have tried all the drivers available, nothing helps. Help me here, please.

  The wireless light is lit on the front, suggestions.

  Thank you

  You should try this wlan driver page:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  or

  [Satellite M45-S169 pilots | http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/modelContent.jsp?ct=DL&os=&category=&moid=1130627& rpn = PSM43U & modelFilter = M45-S169 & SelCategorie = 3 & selFamily = 1073768663]

• Satellite M45-S169 - Sonic v.7.31 cannot burn DVDs more

  I am using a v.7.31 Sonic Record now prepackaged on my Satellite M45-S169 for three years now.
  I was able to copy DVDs using this software.
  Until recently, it burns more.

  What's most frustrating is that space of memory on a blank dvd just exhausted once I try to burn dvd on cd files.

  Help! Help! Help!

  Hello

  Have you tried to delete upper and lower filters in the registry of the Windows operating system?
  Isn't it? Try this:
  Completely remove the Upperfilters and Lowerfilters from the following registry key values:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  Also I would not recommend trying the other and different discs (CD and DVD) from different manufacturers.
  But of course it could also be a hardware problem. I mean the discs of the laser lens has stopped working properly due to mechanical stress.

• I can't install Toshiba Power Saver on my Satellite M45-S169 - Code: Ox7E

  I can't install/reinstall/remove/run Toshiba sleep on my Satellite M45-S169. After I reinstalled the system (now it is Windows XP Professional SP2). When I tried to open Power saver via Control Panel I saw denied it, and every time that I reboot the system, I get the error message:

  Toshiba power save
  A fatal error has occurred. The program will end.
  Code: Ox7E

  I can't delete or reinstall energy saver. Can I try to run saving for Windows XP SP2 applies for other laptop models? I couldn't find one for my model. That one will fit? Any other solutions / advice to the problem?

  Help, please

  Thank you very much, Oksana

  Hello

  First of all, you knew that this laptop was designed for the U.S. market and all the drivers, tools or any other Toshiba utility should be used on the Toshiba site we.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  Please make sure that you have already installed Toshiba ACPI common Modules before as you continue to any other Toshiba Software installation.

  An important tip; the Toshiba power saver profile must be selected in the Windows power options! Don t forget!

• Satellite M45-s169: need driver for ethernet controller

  Need driver for Satellite m45-s169 ethernet controller.

  Check this box:

  [Satellite M45 - S169 RealTek LAN Driver for Windows XP: http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_dtlViewDL.jsp?soid=1043326&moid=1130627&rpn= PSM43U&BV_SessionID=@@@1226357237.1208519686@@@& BV_EngineID = cccdadedlgfhkeicgfkceghdgngdgmn.0 & ct = D L & all_docs = false]

  This will take you to the US site with the network driver you need.

  I hope this helps.

  Chuck

• The upgrade of RAM will improve the speed side Windows and Mac?

  I use VMware fusion for music production and this program requires plenty of work. I have a MacBook Pro 4 GB of ram and when I turn on VMware it goes to 2 GB of ram in Mac and 2 GB ram under windows. My Mac's speed is normal when VMware fusion is off but when I turn on my Mac is very slow. The upgrade of ram will improve the speed on mac and also windows (windows is also very slow)

  BTW, my English is not very good

  Well, take a peek in the Windows Task Manager to see how much memory is required/used. If an operating system requires more memory available, it will start to swap out the disk, which will introduce a huge performance impact. If the answer to your question is probably yes.

  André

  PS: After adding memory to the host, you must also change the client memory for the virtual machine.

• Adding more than one host ESX and the upgrade at the same time.  What is the order of preference of the operations here?

  We are budgeting for more licenses and hardware for 2014 and want to do immediately in January.  I am trying to decide what is the best order of operations for adding two vmware hosts additional to our current installation of vsphere and also upgrade our vsphere / esx 4.1 u3 for the latest and best.

  We have 3 Dell PowerEdge R710 running ESX 4.1 U3.  In this vmware cluster, there is a vcenter server 4.1 U3 virtual machine handle this.  The three servers are about 90% memory used so we add 2 additional servers.  Probably the Dell PowerEdge r.620 since we get up 2 in the space of a 710.  Storage is on a san EMC NX4 NFS which will become too but not yet, let's just deal with the vmware part.

  When adding additional r.620 2, should I install ESX 4.1 on them and join them to the existing cluster and THEN pass vcenter and each one esx?  I ask precisely because 90% of use on 3 current servers, I need 2 other servers to support the update operations take place.  They would be able to repel vmotioned vm while each host receives an upgrade at the same time.

  So which is the best way to go about adding of the hosts and the upgrade?  Would I add as 4.1, then they would be available as targets vmotion and so I have room to start the hosts one upgrade at a time?

  If I update vcenter to the latest version, it is comparable backwards and can manage the 4.1 hosts, but also hosts 5.x?  I guess version 5.5 is the last one I would get from VMWare?  It is right of ESXi, then, how is this ESX ESXi 5.5 4.1 upgrade?  How much storage space do I need for ESXi 5.5, as I'm dechatoiement out of these r.620 Dell and need to know what hard drive to put in.

  The steps that you must follow

  -Updated vCenter Server

  -Upgrade of the ESX hosts (because we do a updating of the material we will install 5.5 on our new guests and add them to the cluster and then dismantle our existing)

  -Upgrade VMWare tools

  -Update data warehouses

  ESXi 5.5 has these storage requirements:

  • Installing ESXi 5.5 requires a boot device is at least 1 GB in size. When booting from a local disk or SAN/LUN iSCSI, a 5.2 GB drive is necessary to allow for the creation of the VMFS volume and a scratch 4 GB partition on the boot device. If a smaller drive or logical unit number is used, the installation program attempts to allocate a region scratching on a separate local disk. If a local drive is not found, the scratch partition (/ scratch) is located on the disk virtual ESXi host, linked to the/tmp/scratch. You can reconfigure /scratch to use another drive or logical unit number. For best performance and memory optimization, VMware recommends that you leave no /scratch on the ESXi host ramdisk.
  • To reconfigure / scratch, see Configure the Scratch Partition of vSphere Client vSphere Installation and Installation Guide.
  • Because of the sensitivity of the I/O devices, USB and SD, the installation program does not create a partition scratch on these devices. Therefore, there is no tangible benefits to the use of the great features of USB/SD that ESXi uses only the first 1 GB. When installing on USB or SD, tent Setup devices to allocate a region scratching on a local disk or the data store. If no disk is local or data store, /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • In Auto deploy facilities, Setup attempts to allocate a region scratching on a local disk or the data store. If no local disk or data store is found /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • For environments that start from a San or use Auto Deploy, it is not necessary to assign a separate logical unit number for each ESXi host. You can co-locate areas scrape for several hosts ESXi on a single LUN. The number of hosts assigned to a single LUN must balance the size of the LUN and behavior I/O virtual machines.

• Satellite 5100/201: problem with the video card or overheating?

  HY,

  I have problems with video on a 5100/201 Satellite. It seems that when I press the left side above the graphics card or press a key on the keyboard on this side, the screen begins to be scrambled and vertical lines appear. To end Windows XP resets giving a critical error on the device and the video goes to 640 x 480. Same thing happens when you run Linux Suse 9.0.

  My question is what is the cause: map graphic damaged or overheating due to the fan not as effective as originally (my laptop is nearly two years old. Do you have someone be able to find the cause and solved the problem, also with the assistance of Toshiba?
  Any help welcome.

  Hello

  I think the problem on your laptop depends on the fan.

  A colleague on mine has a 5100-603 and had similar problems.

  The Station changed the fan.

  Good bye

• Satellite P100-188 starts after the upgrade of the wireless network card

  I recenty installed a new Intel 5100 Series 512AN_MWW Mini PCI NIC in my Satellite P100 - 188 PSPA3E database.
  However, when it is installed, he refused to view and start.

  I'm sure (read the technical info) that these cards use the same interface.
  So why it won't work?
  Is an update of the BIOS to enable a feature. If so, could someone kludge one together please?

  I have the latest version of the BIOS installed 4.70 and am running Windows Vista.
  I am desperate for this that I already have a project N AP 2.0 and want to use it to its full capabilities.

  Cheers, Rob

  Hello

  If I understand your message you have improved the Interior card WLan Intel (Golan) Intel 3945ABG 802. 11a / g to Intel 5100 with project support.

  Boyfriend although it seems that you can't use the WLan draft N card in this laptop model.
  Seems such card is not compatible and cause interference.

  As I know the Draft N need of 3-wire antenna the antenna Satellite P100-188 supports 2 wires only and can be used with the 802.11 A, B or G standard.

• HP pavilion slimline 400: a problem about the upgrade card chart, power, and a new case

  I have a hp pavilion slimline 400 and I want to upgrade the graphics card of it. However, the food is not enough for my new graphics card. The image is too large for this case. SO I decide to buy a new case and PS! Move all the thing inside the hp pavilion slimline 400 to a new case. But I heard someone say that this kind of PC can match the case that we can buy in the store and the cable of the PIN from those of food on the market do not correspond with the motherboard. CAN I really do that?

  You will still need a case that supports the Μatx layout.  I/O back plate must be modded or replaced to adapt.  Most cases have both Μatx and ATX layout (dead end of pines).  For some time that this question of stitching was done.  These help?