Satellite M45-S265 - how to remove file system WiFi?

This Machine of M45-S265 has Intel Pro/Wireless BG network connection.
The driver installed is only intel Version 9.0.4.39 12\19\2007 dated

So I want to "completely" uninstall this driver from the system.
Go through Device Manager and simply ask to uninstall does not completely uninstall.

Because as soon as it updates it will reinstall the same file from a cache somewhere in the system.
So, how can I completely uninstall such a driver of the machine?

Can someone answer this for me? Thank you very much.

Hello

In Device Manager, you can check were the WLan driver file has been installed and the way in which it is called.

Choose the card WLan-> properties-> tab driver-> Driver Details

You will see the path and how the driver files are called.
Go to this folder, and then delete it.

Good bye

Tags: Toshiba

Similar Questions

  • Satellite M45-s265: how to read a DVD without having to start?

    I have a M45-s265 and it says it will play a dvd without boot. How can I enter this mode?

    [Edited by: admin on 5 February 06 17:15]

    Hello

    Press the button with the disk image.

  • Satellite M45-S265 does not recognize WLAN adapter

    I just restore my computer and it does not recognize the WiFi device,
    I tried with the support from Toshiba but I couldn't find an answer, the switch is on but I do not have the Green ligth and in the network of connections is not appear.

    Could you tell me how I can implement this feature? or check the hardware?

    Is a Toshiba Satellite M45-S265

    Thank you

    You see the device wireless in Device Manager?

    Its drivers are installed correctly?

    If the driver is installed, try to disable or reconfigure your firewall

  • Satellite M45-S265 - no boot & gel

    Hi all

    I have a Satellite M45-S265, it won't start.
    When I start it sometimes it will start to load Windows XP then it will freeze and a small ramindomly box appears on the screen, and sometimes it does not start it and other times where I put it to the top of the screen displayed only half size.

    Any ideas what it is?

    PS: I know that the hard drive is good

    Hello!

    > displayed only half size.
    This occurs on an external monitor too?
    If so it could be a problem with your graphics card or motherboard, and this would be the reason why Windows doesn't start over.

    Have you tried to recover the laptop using the Toshiba Recovery disk? Is the same problem occurs if you do this?

    Good bye

  • How to remove file conversion program?

    How to remove file convertion program that appears when you try to scan a document to your computer? It cannot set the default so all I see is writing that looks Arabic.

    Also how is this program have on my computer?

    Hi Swift89,

     

    1. What is the brand and model of the scanner?
    2. for how to connect had this problem?
    3. the scan function work properly at any time?

     

    You can check if you can identify the program causing problems in the clean boot state.
    To perform the clean boot follow step 1, mentioned in the below article and then check in the clean boot state.

    http://support.Microsoft.com/kb/929135

    If the problem is resolved check which service non-Microsoft is the source of the problem; referring to article and following the other steps.
    When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

    a. Click Start, type msconfig.exe in the start search box and press ENTER.
    If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

    b. on the general tab, click the Normal startup option and then click OK.

    c. When you are prompted to restart the computer, click on restart.

    I hope this helps.

  • How to remove the system idle from dashboard?

    Hi all!

    Anyone know how to remove the system idle from dashboard?

    It is possible at all?

    Thaks.

    No, you can't "remove them from the dashboard.

    You would turn them off (aka set them as inactive), and this would remove them from all reports.

    Best regards

    Jon Hemming

  • Satellite Pro 4260: How to remove the DVD drive?

    I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
    Does anyone know how? Is there a manual with available how?

    Thank you

    Hello

    This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
    Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
    Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
    Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

    Well, I think that it of not easy for a person without experience.
    So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

  • Satellite A200-130 - how to remove the BIOS password?

    Would you help me how to remove the password of the BIOS for the Satellite A200-130 PSAE0E-00Y00YAR model?

    My laptop was asked to enter the password when I put under tension.

    Hello

    Just check this article:
    [How do I remove a BIOS password if I forgot it? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=11]

    As you can see it s not possible to remove the BIOS password. It can only be done from an authorized service provider.

    So, you should contact the guy and ask for help. They are able to remove a password from BIOS :)

  • Satellite 1410-902: how to remove a HARD drive

    Hello. Anyone know how to remove a disk for a Toshiba Satellite 1410 902?
    Open the Panel here, it's the HARD drive, but there is no obvious way to get it out... I don't want to force it.
    Thanks for the help.

    Luca.

    Hello

    The HARD drive slot is placed at the bottom of the unit. You don't have to remove the screw holding the cover of the slot. Then, you can simply remove the HARD drive.
    But be careful.

  • WiFi is so screwed on Satellite M45-S265

    Before using a recovery disk, I would like to see if I can solve the problem of WiFi with this machine M45-S265.

    Now WiFi is so screwed with this machine I can't Wireless at all.
    Fortunately the Ethernet works fine so it's on the net.

    Then, how they "completely" uninstall drivers WiFi for this machine?
    If I use the uninstall in Device Manager, it will just refresh and then reinstall the same bad drivers.

    So first of all, I need to know "exactly" I should use to update this naughty drivers?
    So what should be the real procedure to uninstall all the bad things and then reinsert the new.

    I hope that all makes sense.
    Thank you much for the help. It drove me into a wall.

    > So how it "completely" uninstall WiFi drivers for this machine?
    If I use the uninstall in Device Manager, it will just refresh and then reinstall the same bad drivers.

    In Device Manager, you can see what WLan card you have; Intel or Atheros.

    So after verifying that you can visit the page of the Toshiba driver us and choose your model of laptop.
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

    Choose the driver WLan and download and unzip.

    Then go to Device Manager, uninstall the old WLan drivers and then install the downloaded driver WLan again.
    I would recommend pointing to the place where the new Wlan driver was decompressed.

  • Satellite A30 921: how to remove and replace the memory?

    Hi, can someone help me how to remove and replace the memory of satellite A30 921. and also, please give a detailed instruction.

    Thank you in advance.

    Hello

    There is not much to explain. On the low side in the Middle it is placed to cover memory (fixed with two screws). Remove the cover and you will see 2 slots there. I put t know how much memory you here but like Stefan says you can use max 2 GB of RAM (2 x 1024Mo PC2700 - PA3313U-1M1G). How to remove the memory modules, which you can see on http://www.hardwaresecrets.com/article/189/5

    Good bye

  • Satellite A30 - 504 - how to remove the old HDD and new mount?

    Hello

    I have problem with my laptop satellite. After the turn on I've got Announces s.m.a.r.t. disk is damaged.

    I do not have it is why I do not know how to remove the old HDD and replace the new statement.
    I will be grateful for the help.

    Hello

    Looking first for similar discussions in this forum? I guess that you didn t ;)
    The advanced search option is very useful and you can search for single yarn that could help you.

    I found this:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12526&MessageID=45688

    and this

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=12547&MessageID=45752

    It seems that the hard drive on your A30 is in the optical drive, and you must remove all first the STRANGE before you get access to the HARD drive.

    Best regards

  • How to remove file attributes

    I have Vista Home Premium running on my laptop (and I wouldn't if I could get XP to reload) and she put on my WD external hard drive file attributes to read-only.  I found the following thread and followed the steps in it.

    http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/595795ba-3ffd-4052-8a0a-afd51292292d

    Unfortunately, what is to me a message that says:

    E:\ > attrib r * / S/D
    Invalid switch - / S/D

    [I tried to run with just the/s but what is gives me a very long list of reset do not file hidden - E:\[File name].

    Can someone Please, please, please tell me how to get rid of this attribute of reading only freaking that I neither want nor need.

    Hello

    The above command is spelled wrong. It should be
    attrib - r [drive:] *. * /s /d
    don't forget the space between /s and / d

    I just wanted to share in case anyone has a similar problem as my client where all files and directory have been hidden and the hidden attribute is grayed out.
    This means that the files and folders are classified as system folders, to fix this use:

    attrib s h [drive:] *. * /s /d
    This will change the attribute on all the directory and file in the drive letter specified, including the subdirectory.

    or use:
    attrib s h [drive:] [path] *. * /s /d
    to change only the files in a specified path or directory

    don't use this on your c: drive because it will expose completely all system folders which, in most cases, is not a good idea.
    Use for files and folders, or USB drives where the files are hidden or classified wrongly as file system.

    Best wishes
    Thomanji

  • How to remove files from original in first?

    How to delete the original files (not only related clips) in first?

    'Set the media offline' doesn't work (error message indicating I Don t have rights, which is a nonsense).

    Best Reinhard

    I Don t have rights

    Obvious, that you do not have. Need to check that this particular issue or were ever they are stored.

    Remove files can be done directly from the hard drive.

    The files will go offline and delete in the first.

  • Satellite M35 Pro - how to remove the screen bezel?

    Hey everybody,

    Please help me, I was able to disassemble the computer laptop everything and now I have the screen and the top cover out as well. I don't know how to remove the display frame to remove the hinges.

    Can you please help me with this!

    Thanks in advance!

    Hello

    Well my friend, in my opinion you should not try to disassemble the laptop if you n t have the necessary experience and don t know to do this!
    You could damage other parts that you know

    You're stuck on the LCD mask?
    As far as I know the LCD mask is covered by two screws that are hidden under the joints.
    You will need to remove both seals of mask LCD, and then you could remove the two screws hidden under the seals mentioned.
    Then, you could put your fingers between the mask and the LCD screen in order to release the LCD mask plastic locks.

    But note; Be careful, don't use any force!

Maybe you are looking for

  • iPhone 6 s factory reset with broken screen

    Hello world I recently broke and unfortunately broke the screen of my iPhone. Fortunately, I had insurance through my phone carrier and they sent me a new phone. Before you send it, they had me remove my iPhone the iCloud on find my iPhone. I try to

  • start the menus and options of start

    I have TouchSmart IQ505. Windows 7 and upgrade to Windows 8. Everything seems to work very well. My HP printer to work, all my programs installed and work very well. The only case I'm having is when I try to start the installer or diagnose the mode u

  • Nobody is displayed online when there is no internet connection

    As the said title, someone I know, has no internet access, even if its Skype also appears online (on a mobile device)Finally, she was online, was at the hotspot wi - fi at the airport before entering the plane.What might be the case for Skype in the

  • Migration between two Mac Pro

    I've upgraded to a MacPro 4.1 old in the new 'trash' MacPro.  But I only have one monitor.  Is the hot port "swapable"? display

  • How do I rid the computer of a triangle with a point that transfers quickly no matter what page I'm on?

    I'm scrolling a page when the triangle will pop up - most of the time it is a triangle with a dot underneath.  He takes control of the page and accelerates downwards?  I do not think that I asked for this command, but maybe I've hit something by mist