Satellite M45: Windows XP does not start when you click on the user name
I have a portable Satellite M45 in XP service pack 2.
After starting the PC, he gets that windows journal under the screen, I click on connect my name and nothing happens.
I have completely reinstalled the operating system, updated all drivers etc, and it was fine for one night.
The next day, I'm back to square 1 and cannot log in again.
It starts in safe mode, but I don't know how to start to solve the problem.
Can someone advise please?
It's very strange!
Have you removed any spyware or Trojans?
Question you is really, really strange, and I guess that the 'bad' software causes such problems...
It seems that something changes that replaces Userinit.exe.
A similar question has been described here in the MS knowledge base:
It seems that some registry have changed and that's why the connection does not work correctly!
I added several pages to my website with viewers.
In a few pages, the slide show was under the footer... and in others, when I click on the thumbnail, the slide show does not open...
Where could be the problem?
Thanks for your help!
Opens the slide show does not, is very odd.
What do you mean by "beneath" ? The content of the album will always focus in the middle horizontal and vertical of the browser (not on the exact spot where you have put it on the page of Muse). Who is?
Please publish your website online to test. Just press "Publish" and let the Muse to assign a temporary address for her. share this link with us.
Help am stuck with it.
Necessary to perform a recovery on the laptop and used the recovery CD 2 they seem to work OK. No error during installation, but after that they finished and it restarts didn't get the following message.
Windows could not start because the following file is missing or corrupt:
You can attempt to repair this file... etc but I don't have any original installation CD all have is the recovery for the Toshiba.
I have a setup of Windows XP for the PC disk, but when I try to run which, but it starts just the configuration. Setup is loading files and after the kernel debugger get error
"File ntkrnlmp.exe could not be loaded.
The error code is 4, sometimes it's 7.
I tried to delete and recreate and formatting partitions, so I can see and I can copy a file to the C: drive
So any suggestions as to what wrong here
Thank you very much
I put t know if this Microsoft Knowledge base article would be useful for you, but you should check it out.
[You receive a "Windows didn't start because the following file is missing or corrupt: Isapnp.sys" error message at startup | http://support.microsoft.com/kb/315311]
Microsoft has a solution, and I would like to know if you can solve this problem by following the steps of the solution described in the article.
Feedback would be much appreciated
I'm running OS X 10.11.2.
I have set up a training camp 10 Windows on my Macbook Pro sometime ago, but today I realized that I need more storage. I watched how do so online and came across this thread:How to resize my bootcamp partition without deleting chtol. I followed the instructions, but could not know how do I find my Windows partition.
So I think that I have the problem described here: repair Boot Camp after having created the new partition. I did what Christopher Murphy described on the first page and this error message appeared when I pressed "w
"Failed to open device ' / dev/disk0 ' for writing! Errno is 1! Writing of abandonment! »
I deleted from the extra without internal hard drive name in the hope that he'll fix it, but it didn't.
I would like to enlarge my Windows partition, but at this point, as long as I can access my Windows Bootcamp partition, that would be great!
EDIT: I unfortunately do not back to the time Machine.
Resizing Windows partitions is not officially supported by Apple - Boot Camp: resize the Windows partition .
Please after the release of
Cs diskutil list
sudo TPG - vv - r see the/dev/disk0
even when I go to the start menu and click the itunes icon it startsHello· Did you the latest changes on the computer before the show?You can follow the steps in troubleshooting the link and check if it helps.iTunes for Windows XP: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues
my windows xp does not start and it only shows the arrow and a black screen in the Middle, what can I do to solve this problem.
Try to restart your machine and pressing F8 before the spash screen Windows appears. Choose the option "last last known good configuration".
If this fails, you can try to repair your installation of starting for the original CD-ROM for Windows XP installation and choosing the option 'Fix' when prompted.
I have Windows Vista. This problem started a week ago. I tried at first to use my "ccleraner" already installed, but this program does not open when you click on it. I was asked to choose the program that the application to use to open it. This has also happened when clicking on itunes. My avast program when you click also asked which application is required to open it. When it finally scanned my system it does no propblems. In addition, I tried to turn on windows defendrer as he told me that it was off. Clicked on 'Turn on..' and nothing happened. Help!
See the following message to solve the problem of .exe if necessary once you are sure that the system is clean.
Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task manager
Process tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
Right-click on it and rename it to ZZMbam.COM (or something different than now), then
Double-click it and run it like this. You can rename it back later. Do the same with others
programs as needed. Use this method for other necessary - DO NOT ASSUMER one
program removes all or that there is no other malware.
Another method is to use them:
Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
AutoRuns - free
UnLocker - free (do not install the adaware Ebay)
There are MANY varieties of these with many names, but all can be eliminated with the same methods:
Win 7 Antispyware 2010 XP Internet Security 2010 and Vista Antivirus 2010 is rogue antivirus.
scams to get you to pay for them while they have no advantage at all.
How to remove all THE varieties of this malware - please read carefully the removal Instructions.
RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run the
in the regular when windows you can.
Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)
Microsoft Malicious - 32-bit removal tool
Microsoft Malicious removal tool - 64 bit
also install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
Choice of PCmag editor - Prevx-
Try the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
If necessary here are some free online scanners to help the
Other tests free online
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
cursor moves but does not respond when you clickHello1. what email program are you using? Is - this Windows Mail or Outlook?
2. is the problem with emails in Gmail or Hotmail or Yahoo on Internet Explorer?This can happen if the e-mail scanner is running on the system. The analysis of electronic mail is a built-in feature of many security software. We recommend that you disable the e-mail analysis and check the result.Please provide us with more details on the issue, so that we can better help you.Kind regards
Answers from Microsoft supports the engineer.
The Task Manager does not appear when right-clicking on the taskbar
It appears when you press ctrl + shift + ESC? It seemed before? You are an administrator on this computer or is it a corporate system?
If he has suddenly ceased to be available, it's a good sign that you have picked up a virus or some kind of malware. Formal analysis in safe mode is your first line of defense.
Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
I hope someone can help me.
My DVD player does not open when I click on the button.
I tried clicking on eject on the DVD drive icon in my computer and it comes up with an error message.
I think I deleted the cookies the other day. Who would have something to do with the problem?
Any help would be greatly appreciated that I really don't want to send my phone to a technician.
Try to manually open the CD/DVD drive.
Near the eject button, you will find a small hole.
You can use a small object like staple and could push gently into this hole.
Usually, this should help to open the drive manually.
I actually had this problem for a long time, but I'm just now to a point where I'm ready to take a lead in fixing it.
I can't identify when it started, but Windows Vista does not start upward, with success of a full stop. He gets to the screen where, in general, the green bars will travel across the screen, but the green bars will not come. The screen looks dim and sits there, with the text of the copyright of Microsoft Corporation. So, after not having on the mound, I have to manually shut down the computer by holding down the power button. When I try to start again, told me to go through the Startup Repair tool. If I jump the repair, I just have to meet the same problem - a computer that will not go beyond the screen "green bar".
So, I do the Startup Repair, and told me what I do for the restoration of the system. Windows starts normally after the restoration.
Don't forget, this happens from a full stop. To remedy this, I just never completely shut down my computer. I left running and back just at the beginning of the day. The computer may start restart, it just may not start with a full stop.
Given the start of repair takes, literally, around 4 or 5 hours of full stops complete, accidental or power outages are a nightmare, I am obliged to wait 5 hours to get access to the computer. Fortunately, I have my laptop.
If someone has encountered this? I saw people talking about the loop of startup repair, but that's not the point, I have. I have yet to see any discussion of my specific problem.
Thanks in advance!
4-5 hours to do a startup repair is too long.
Often you get better results if you a using a DVD of Microsoft Vista startup repair.
Jose how to do a startup repair, etc. using a DVD of Vista from Microsoft
Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.
Here is the guide to repair Options using a Vista DVD from Microsoft.
If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.
Table of contents
- Overview of Windows Vista repair options
- How to perform an automatic repair of Windows Vista using Startup Repair
- Advanced Tools Overview
If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.
Unfortunately, you have to buy it.
Here is a link to it:
See you soon.
I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.
Even once when I closed and leave it for a while and still the problem is not resolved.
I solved the problem
Today, I decided to disable unnecessary programs as many as I could (to speed up my pc), so I went to Msconfig (I have vista home premium 32-bit) and a lot of things off. Including the "toshiba button support. The next time I restarted my additional buttons on the top of the keyboard all worked, next to one. Who normally turn on windows media player. This time, he did nothing at all. Game/resume, stop, forward, back and button internet all worked without problem.
However, I really liked the WMP button, so I tried to find out what the problem was. I discovered that it was the support of the key, so I decided to reactivate it.
However, this didn't not help: (.) I turned it in msconfig, but it does not start with windows more: (.) I know this is the program that I need, because when I run the program manually (this is the program: programfiles/toshiba/TBS/HSON.exe) the button works.
I put a V in front of the msconfig program, but it does not work. Anyone has an idea why not?
Edit: I found a solution, even if not the best. If anyone still has the same problem:
I made a shortcut for the program to run (can be found in C:programfiles/toshiba/SCT and is called HSON.exe). Then I clicked start and said 'all programs', here I chose the "opstarten" folder, it comes to the Dutch version, but my guess is it's called something like 'start-up' in English. In this regard, I glued (copy / cut-> paste) the shortcut to the program, and now he begins again :)
I agree with Akuma. You should try to reinstall the Toshiba value added Package. This determines media keys FN and all special functions on the laptop buttons.
Search on the Toshiba site for an update:
http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers
Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.
In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.
What should I do to get a normal departure procedure?
When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.
When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
The same thing happen on my Satellite A300.
Firefox functioned perfectly earlier today. Tonight, when I tried to start Firefox as I usually do by clicking its icon in the quick start of Windows 7 bar there is no frequency. The same thing happens when I click on the application icon in Windows Firefox program folder. Is some way this can be fixed easily?
I ran a full scan with Norton 360, Malawarebytes and Iobit Malware Fighter, whose no is no problem. Also, I checked the settings of Norton 360 and found no problem with the settings of Firefox. I downloaded the Firefox installation files and ran a custom implemented, by clicking on upgrade. Firefox now works well with all the Add-ons, bookmarks, history, cookies and saved passwords intact.
Maybe you are looking for
Hello I have a MacBook Pro (13-inch, mid 2012) with 2.9 GHz Intel Core i7. My usual is the power plugged; Sometimes, it is running on battery. In the night, I close the applications one by one, then stop the MacBook. I'm doing this because I thought
Hey there, Im trying to create a league tables, the only issue is, I'm pulling of the competitors of the three divisions different (each on their own sheet) and put them in the order of ranking on a separate sheet. My first sheet is as follows Rank C
I got another laptop that I gave my daughter and in less then 2 weeks she had forgotten on top of his car and left. Long story short, the laptop was destroyed, but I have recovered all I can get out of it and hoped that I could put this i5 chip in m
Hello I need a function UART reading which should read the data stream and return when received at least two specific characters. ComRdTerm has the character of one stop. Is there maybe a workaround or a method that will do the things? Example: TermC
Until October 26, 2012, there were three icons on the toolbar from my computer next to the Start button: 1 Internet Explorer 2. 3. Outlook Express desktop. A time gave that day - Thursday when Winows 8 came out - the Outlook Express icon has been rep