Satellite M50 - A - ELAN touchpad has stopped working

Similar Questions

• Buttons and satellite C50-B-189 touchpad has stopped working

  my daughter received the foregoing, f. Christmas. the touchpad and associated buttons have stopped working -no cursor. How do we get working again? Stem +.

  Hi, this is due to the pad (which is buggy), just kill the process by using CTRL + SHIFT + ESC AND THE TAB more DOWN to navigate through the process target. I do it every start.

  Of tomsguide (November 2014):

  These patches do not help, all that happens is, after a while, the touchpad fails again. While Toshiba works on this point, I found a quick and effective solution. That's my new Windows 8 Toshiba.
  Press CTRL ALT SHIFT to get your process to come. Find the Touchpad "enhancer" process. Complete the process. Your touchpad works until the next reboot, how simply repeat this step.
  If you're struggling complete the process without being able to use your touchpad, I discovered a curious thing. If you hold a mouse click, you can move the arrow of the mouse with the touchpad very well. Its a bit... awkward... but all you have to do that is to end this process and after that, you can use the trackpad normally.

• Satellite A200 - touchpad has stopped working

  I have a Toshiba Satellite A200. Touchpad has stopped working, I can no longer scroll. I tried all the settings, but it did not work.

  What should do?

  Why you n t trying to update or reinstall the driver of the touchpad?

  I think that this should be done first of all, you can download the compatible driver since the European driver Toshiba page and could reinstall it.

  Concerning

• Touchpad has stopped working on Satellite A30

  The touchpad has stopped working, I tried most of what is obvious
  any ideas?

  Hi Phil,

  I assume you tried Fn + F9? This combination activates / deactivates the touchpad on and outside.

  HTH

• Satellite C series - Touchpad has stopped working Windows 8 running

  Hello

  I put t know if anyone can help.

  My touchpad has stopped working.
  At first, it only works on the login page. Now it s not there at all.

  I've only had my Toshiba C for a few days and it s the first time I used Windows 8.
  I tried F5, and I tried to go on the BIOS with F2 when booting, but used to come.

  Help please

  Hello

  Please check this Toshiba document:

  + How to change the settings of the Synaptics touchpad in Windows 8? +
  http://APS2.toshiba-tro.de/KB0/HTD3101Z30000R01.htm

  Don't forget that the necessary parameters of the touchpad are enabled!

• Touchpad has stopped working in my Satallite L850

  Hello

  My Touch Pad has stopped working in my Satallite L850 - 150 / Windows 7 64 bit. Could someone help me?

  Kind regards
  DAV

  > Touchpad has stopped working in my Satallite L850
  How to understand this?
  You can toggle touchpad by using the FN + F9 key combination?
  The touchpad driver is installed correctly?
  Touchpad is listed in Device Manager?

• Satellite Z830-10U - Touch Pad has stopped working

  I have been using a USB mouse for a few weeks and touchpad is still operational. A few days ago the touchpad has stopped working. No issues are raised in the device manager that told me the power switch for the touchpad buttons. But by pressing the dedicated button and fn F9 has not changed anything.

  Really confused, but think I'm missing something really obvious that I can not think an event trigger, so assuming that some magic button will bring the key back to life.

  All help gratefully received...

  Hello

  What happens if you disconnect the USB mouse?
  You can use the touchpad again?

  From my point of view, the use or installation of an external USB mouse has affected the touchpad feature, I can't say with certainty why and what is happening right here, but I read in various forums on similar problems and sometimes caused USB mouse use touchpad problems.

  For example: in my case the touchpad does not work with connected USB mouse I was very confused, but found a solution in my case the option disable touchpad when USB mouse is connected has been verified and this disabled the touchpad.

  You can find it here:
  Control Panel-> mouse-> last (Advanced) tab-> the Advanced Settings button

  One of my friends couldn't use the touchpad because it has been disabled in the BIOS.
  It is worth to check also

• Tecra A8 - Touchpad has stopped working

  Hi all!

  I have a Tecra A8 (model: PTA83E) who has an ALPS touchpad. The touchpad has stopped working even if it is visible and fully operational in 'Device Manager' and also the 'Control Panel '. Apparently there is nothing wrong with it but the touchpad does not meet the clicks or touchs, it seems as if it has been disabled, but said, in Device Manager, the information is 'this device is functioning.

  I updated the OS to Windows 7 Enterprise and I would like to activate the touchpad if not I should always use a usb mouse. I searched the touchpad drivers but it seems they are Don t.

  This is the information that I can view in "Device Manager", about the pilot:
  -Controller version: 7.0.302.3
  -Date: 26/09/2006

  Thanks to you all.

  Hello

  You have activated the touchad by pressing FN + F9?

• Satellite A100 - 02L - Media Player has stopped working

  I have a Satellite A100 - 02L with Vista. I have there two weeks and media player has stopped working, it won't even open. It worked fine when I bought the laptop but not worked for the past few days.
  Does anyone know why it happened or how I might solve this problem?

  Maybe a magician can tell you for sure why WMP has stopped working. Who knows what you have done with it?

  Try to download and install the latest version. Maybe it will be working again.

• Satellite A60-652: ati2dvag driver has stopped working

  Hello

  Recently, I have a few problems with my graphics. My satellite freezes and goes to a low resolution with a few colors. A message indicates that the ati2dvag driver has stopped working. After that restart of the satellite shows a blue screen and restarts... same thing happens. Only stop and try again after a few minutes made me return to the normal Windows.

  I tried to look for new drivers, but I can't indicate my model (SA60-652)... is this too old model for the updates?

  Toshiba SA60-652
  ATI MOBILITY RADION 7000 IGP
  pilot ati2dvag (6.14.10.6430)
  Windows XP (SP2)
  AVG virus scan
  Hitman Pro anti-spyware
  ATI hydravision installed but never used :-/
  Laptop has recently increased temperature... I'll deal with that after my final thesis (May 8)

  Please can you help me?
  If you can, please be made clear in the instructions, "I don't know much about computers caus... (PEBCAC)

  Thank you!

  Hi Jeroen,

  I think that your problem is related to overheating rather than a defective display driver. The idea here is that it takes several attempts to reboot, giving the unit time to cool.
  I suggest that you try to remove all dust and debris from your radiator and see if it improves the stability of your units.

  You can download a copy of your display driver of: -.

  http://UK.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=UK

  Kind regards

• Satellite Pro M70 - Windows XP has stopped working - registry problems

  My M70 lost (I will follow soon!). Windows XP has stopped working, registry problems. I finished by using the Toshiba Recovery disk and reformat the hard disk. Said again there is some registry problems and crashing.

  One had similar problems?

  Phil

  Hi Phil,

  If your laptop is always report registry errors after having re-installed the operating system from the recovery disc, then it is likely that your hard drive has errors. The Windows XP registry is composed of several files (or urticaria), and the installation process will always be located in the same area of the hard drive.

  Kind regards

• Satellite M70-340: display driver has stopped working

  HI, I BOUGHT ALL NEW LAPTOP FROM DUBAI THE MONTH LAST. HIS GIVING DISPLAY PROBLEM BEGAN THE IALMRNT5 DISPLAY DRIVER HAS STOPPED WORKING NORMALLY. MUST RESTART TO COMPLETE SYSTEM RESTORE"

  I DID ALSO DRIVE FORMATTED, REINSTALLED PREDRIVERS. BUT IN VAIN.

  ADAPTER IS INTEL! ATI DOES NOT INSTALL!
  DON'T KNOW HOW TO TO THIS TOPIC AND NOW IT JUST BEDS ONLY BLUE POWER LIGHT AND CRASHES ON STARTUP WITH SCREEN WHITE!

  PLEASE SUGGEST...
  CONTACT on [email protected]

  Hello

  If the reinstallation of the system with the recovery CD does not help, then it is not a software problem.
  This means that some hardware component is defective.
  In this case, you need to take your laptop to the service.

  Good bye

• Satellite Pro L20: Adapter WLan has stopped working and will not allow

  Hello

  I have a L20 Pro Satalite, which works very well. However, just before Christmas 2006, the adapter wireless (Atheros AR5005G) has stopped working.

  Windows XP Pro SP2 can see the adapter and network connections shows as being activated, but he sees not all networks.

  The Atheros Client Utility says that the adapter pases troubleshooting TI test diagnosis up to the Radio, when he says that the Radio is disabled and must be enabled in the Client utility.

  'Excellent!', I thought: opening the utility forward. Looked in the Action menu to find "turn on the Radio" is greyed out!

  Help!

  Any help is very welcome.

  See you soon,.

  Barry Smith.

  Is there a hardware option to enable and disable your wireless network card? (switch)
  You upgrade your Wlan driver recently? (If Yes, maybe with the wrong driver?)

  I had a similar problem once and resolved through driver updates... want to give it a try?

  You can download the driver generic Atheros (Version 5.0.0.107) available here:

  http://www.DD-WRT.com/DD-wrtv2/down.php?path=downloads/drivers/&download=Atheros5_0_0_107.zip

  Concerning

  chain

• My touchpad has stopped working

  Hello. I'm Zaitul and I Aspire E 15. the touchpad suddenly stopped working and if the cursor isn't even when I touch the touch pad. my laptop still can be exploited can I use an external mouse. but the touchpad is one of the important components for certain situations.  What should I do?

  I had the same problem happen to me only yesterday. I ran windows update and it showed the optional updates to install. One of them was the "Serial IO I2C ES controller driver Intel", which I clicked on update. It installed and required a reboot. To restart, I noticed that the mouse cursor disappeared during the connection and after that the touchpad was totally insensitive. I tried to disable/enable the touchpad with FN + F7, but that did not work. Fortunately, I had a classic USB mouse I plugged, which worked. Open the Control Panel, Device Manager, it showed the devices system/I2C controller with a yellow triangle next to it (showing that the driver could not run). I chose to restore the driver to the previous version, and the touchpad started working immediately. I suspect that you have the same problem.

  To fix:

  1. open Control Panel.

  2. Select and open the Device Manager.

  3. Locate the I2C controller in system devices.

  4. double-click on I2C controller.

  5. Select the driver tab and click on the button return to the previous version.

  6. your touchpad should start working again.

  7. close the Device Manager.

  8. close the control panel.

  I see the Acer response to this problem and their suggestion because I suspect that in the following days, there will be a large enough percentage of users of Acer laptops running into the same question.

• Satellite 1900-303 Touchpad: has stopped working

  The touchpad on my Satellite 1900-303 has suddenly stopped working for no apparent reason. The touchpad icon has disappeared from the office toolbar & I do not see the touchpad listed in Device Manager. However, the ALPS touchpad driver is listed in the installed programs.

  The laptop runs on XP Pro SP2. Can anyone help with this please?

  Can you imagine that the TouchPad is defective and this may be the reason why it doesn't work?