Satellite M50A - ELAN touchpad stopped working - again!

Similar Questions

• Re: Satellite L300 series - Touchpad stops working

  I have aan L300 series Satellite. On booting, the touchpad works fine until I get the workstation, after which the tap function ceases to work. The touchpad works to distribute me to move the mouse around the screen and buttons work, but the touchpad to stop tapping function run once the machine started upward (it seems to work for about the first 30 seconds).

  This happened recently, but I can't put my finger exactly when.

  I tried to uninstall and reinstall the driver and we tried Fn F9. Is this a bug of Windows, a Toshiba or some other glitch glitch?

  Help, please!

  Brett

  Hello

  I doubt s a hardware malfunction...

  You should check the touchpad settings like Jurgo wrote. You can find it in Control Panel > mouse. Make sure that typing is enabled, otherwise look will not work correctly.

  Check this box!

• Satellite L500D PSLT6A - FN keys and touchpad stopped working

  I have a Satellite L500D, model PSLT6A-015003, windows 7 (32 bit) notebook and the keys FN and the touchpad stopped working.

  I downloaded from download of Toshiba, the touch pad and the FN key downloads page, but nothing works.

  Can someone tell me please how to get this working again, even if it's only the touchpad.

  Flash cards are controlled by the utility of Flash cards and this utility is part of the Toshiba value added package. If this package is installed on your machine it remove the system, restart your computer and install the latest version of the Toshiba download page.

  Please also follow option:
  Open the settings of flash cards and set the option to allow the mouse to make the maps and test if it works.

  Please check the touch pad properties. Check if the touchpad is properly listed and enabled in the device (mouse and other pointing devices) Manager.

  Second thing you must check is the control panel > mouse > device (last tab) settings. Make sure that the Synaptics touchpad is listed here and it is not disabled.
  As last step make sure touchpad is not disabled with the combination of FN keys (if possible).

• Satellite Pro A210 - keyboard and touchpad stop working after hibernation

  I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

  Anyone have any ideas?

  Hello

  You have installed all the drivers for your laptop? I mean especially the chipset driver.
  Check this box!

  If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

  Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

  Sorry, but that's all I can say at the moment

• Re: Touchpad stopped working on my Satellite L350-171

  Are my touchpad stopped working and the 2 buttons below. I have been using only a usb mouse, but I want to free up space, are there solutions please.

  Please check first if the touchpad is enabled or disabled.
  Use the FN + F9 key combination and don't forget the touchpad is enabled.

  Also check the Device Manager and the entry for the mouse and other pointing devices. Touchpad is listed here?

• My touchpad stop working suddenly... .Please help me

  I have laptop HP 530. All of a sudden my touchpad stop working when I press on double-click.

  but I'm stil can move the pointer of the mouse over it.

  I don't really know what is the cause of this problem, I need someone to help me please.

  Osama.

  My touchpad back to life finally , I am so happy happy

  After 8 months suddenly and luckily it worked again

  It's a problem with the hardware, by chance, I pressed the left button of the penalty and I have the answer to the pressure

  Thanks to God,

  Thank you anyone help me

  

• My cursor Touchpad stop working.

  I have Toshiba laptop, Satellite C-650-01W.  Cursor Touchpad stop working. How to get back to work?

  Hello

  Thanks for the reply.

  Glad to know that the problem has been resolved. If you have additional questions about Windows, please post your questions in this forum.

• Satellite C650 - sound suddenly stopped working

  Hello.

  I bought this laptop the month last November.
  in any case, around a week or two ago, the noise suddenly would not work.

  He started making strange noises when I put in the headphones and speakers just made no noise at all never.
  I did a lot of weird things - like system restore, reinstall audio drivers but nothing worked until I updated the bios, then everything went well and the sound worked again.

  However, today, the sound suddenly stopped working again. I tried to re - install the current bios but InsydeFlash says: "the version of the ROM file is the same BIOS version" and just closes.

  I searched the internet for an older version of the bios, but when I try to install it, InsydeFlash said: 'the version of the ROM file is not newer than the version of the BIOS' and of course, I know that but then it closes too!

  I'm not really good at computers or anything, any help at all would be appreciated.

  Thank you.

  Hello

  I recommend checking some options first;
  -check if mute is not activated
  -check if all the volume controls are set to a higher value
  -check if the sound using headphones

  If this is not successful, you must reinstall the audio driver.
  First go to Device Manager and uninstall the audio driver. Restart the device
  Download the audio driver from the Toshiba page, then reinstall it. Reboot once again and test the sound.

• Satellite L850 - webcam suddenly stopped working

  The web cam on my Satellite L850 has suddenly stopped working.

  It does not appear in Device Manager;
  I downloaded the latest driver on the Toshiba site;
  I checked the BIOS and the web cam is turned on;
  Always when I open the web cam application I get the following message:

  "webcam initialization failed Please restart request and camera control.

  I scoured the advice forum and short of a return to the top and reboot disk HARD, I find no reasonable answer. I can't back up as I am away from home is out of the question. I need web conference call cam / call my family to the United Kingdom back.

  Tired of going round in circles and getting nowhere.

  Any suggestions?

  Post edited by: mrclean

  Even if you have not changed the settings in the BIOS, you must Access the BIOS to make sure that the webcam is turned on it!

  I also recommend the suite of this workaround:
  Uninstall the webcam software
  Uninstall the VAP
  Uninstall all software needed the webcam (Skype, etc...)
  Now, restart and install CCLeaner (cleaning of freeware software)
  Reboot once more.
  Run CCleaner and clean the system and the registry.
  Reset
  Now follow with installation of VAP
  Reset
  Install the webcam software
  Reset
  Test webcam.

  Good luck

• CD/DVD-Rom on a Satellite 1110 laptop has stopped working

  Hello

  The CD/DVD-Rom on my satellite 1110 has suddenly stopped working. When I insert a cd or a dvd there is no activity in the drive and when I look in my computer there is no recognized files.

  I used the Device Manager and it says that the device is working normally. It's like the PC just can't 'see' the camera more.

  I used the program of troubleshooting without success and I was wondering if someone technically a little more spirit that had me ideas

  See you soon

  Rob

  Hey, sorry cannot be of any help to you, but I'm having exactly the same problem. I can't find a place to download the new drivers.

  did you progress?

• Compatible Snaptics Ps/2 Port touchpad stop working, gives error Code 24

  Last Thursday my Snaptics Ps/2 Port Compatible TouchPad stop working. Code 24 arrives. What is the 24 code and how can I solve this problem?

  Hi linda3398,

  Please see the following about the Code 24:

  Code 24

  This device is not present, is not working properly or is not all its drivers installed. (Code 24)

  Cause

  The unit is installed incorrectly. The problem may be a hardware failure or a new driver might be needed.

  Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.

  You may need to update your drivers for the touchpad.

  I hope this helps!

• A few keys on my laptop stop working again. It's already happened and I do not remember how I fixed it

  A few keys on my laptop stop working again. It's already happened and I do not remember how I fixed it

  Hi cagoehring,

  1. did you of recent changes on the computer?

  2. What is the number of brand and model of the laptop?

  I suggest to use the external keyboard and check if all the keys are working properly.

  Also use the keyboard on the screen and check if it works.

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows-Vista/type-without-using-the-keyboard-on-screen-keyboard

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My touchpad stop working, how re - activate it?

  I had it hooked up to a TV to live stream on the TV screen, in the process of my touchpad stop working and I had to use the mouse to another system.

  Hi Jvergith,
   
  1. have you tried to update your touchpad drivers to see if that fixes the problem?
  2. What is the brand and model of your laptop?

  Remove the touchpad drivers in Device Manager and reinstall.

  To reinstall the drivers for the touchpad by uninstalling current drivers
   
  Sometimes, there may be driver errors that prevent the touchpad from working.
   
  a. Click Start; on the start menu, search type devmgmt.msc and press ENTER.
  b. If you receive a quick click, consent to continue.
  c. expand mice and other pointing devices.
  d. right-click on the component of touchpad and click on uninstall.
  e. once the uninstall is complete, restart the computer.
  f. download the latest drivers for the touchpad of your computer manufacturer website and install it.
   
  Try to follow the link provided to update a hardware driver that is not working properly and check the question below.
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Satellite C850 - Touchpad stopped working

  Hello

  When using the touchpad has decided to stop working completely - the key and the keys. Any ideas how to solve this problem?

  BR
  Juha

  Touchpad works again when you restart your laptop?
  Is there a reaction when you use the FN + F9 key combination?

• Satellite P300 - 18 M Touchpad stopped working

  My P300 works wonderfully, but suddenly the touchpad has completely stopped working - including the buttons left and right. I can't find the touchpad in Device Manager, and it is at the limit of my (in) skills!

  Where should I look? Any help would be much appreciated! Thank you.

  Michael

  Very strange problem! Please open Control Panel > mouse properties > Hardware tab is listed Synaptics PS/2 Port TouchPad?

  Have you tried to roll back the BONES to the bygone era? Please try it out.