Satellite M50D - Has: devices of USB 3.0 not working in USB 3.0 ports

Similar Questions

• How to use a USB microphone with voice dictation on MacBook Air?  Machine recognizes the USB device, but the microphone does not work.

  How to turn on a microphone USB bluetooth with voice dictation (Dragon for MAC) on the MacBook Air?  Machine recognizes the USB device, but the microphone does not work.   I don't see no response.   I use OS X 10.10.

  Version OS X?

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Windows xp has been partially updated and may not work perfectly

  To install the 3 XP SVC pack... Neede Svc Pak 2 do following error Yes, obtained by attempting to do so.

  Windows XP has been partially updated and may not work perfectly

  Hello

  -You installed correctly updated recently?
  -You are aware of any changes made on the computer before this problem?
  Method 1: I suggest to maintain the computer in clean boot mode and check if the problem still persists.

  Step 1: Clean Boot Mode
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, refer to clean the start link to configure the computer to normal startup mode.

   

  Step 2: Manually disable the Antivirus

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Step 3: Install Service Pack 2 (SP2)

  http://support.Microsoft.com/GP/xpsp2getinstall/ja

  http://support.Microsoft.com/kb/875364

   

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

   

  Include to determine which SP1 is installed

  http://support.Microsoft.com/kb/310104
   
  Method 2: Follow the steps mentioned below and check if the problem persists.
   
  Step 1: Microsoft Windows Update Agent tool
  How to get the latest version of the Windows Update Agent?
  http://support.Microsoft.com/kb/949104
   
  Step 2: Try to install the updates and check if the problem persists.
   
  Method 3: Try to download and install the Windows XP SP2 and SP3 manually and check if the problem persists.
  For Windows XP SP2:
  Windows XP Service Pack 2 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=28
  For Windows XP SP3:
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  http://www.Microsoft.com/en-US/Download/details.aspx?displaylang=en&ID=24
   
  Hope this information helps.

• I have the one year subscription and I ran more money on my debit card. If adobe stopped the cloud creative until I put a new card debit that has money, but it still does not work? any ideas.

  I have the one year subscription and I ran more money on my debit card. If adobe stopped the cloud creative until I put a new card debit that has money, but it still does not work? any ideas.

  The CC has expired, please make a new purchase.

  Technically, you will need to disconnect & reconnect the CC desktop application.

  Concerning

  Stéphane

• Satellite M50D - Has - 10 K dosen't boot device USB WEIRD

  Hello

  I'm new here in the Forum and I have a problem with my Toshiba laptop.

  I want to do a complete backup of the drive HARD internal of my Satellite M50D - A - 10 K.

  I want to boot the laptop with my SE-208DB Samsun DVD USB drive with Acronis true Image 2011, but dosen't boot laptop, the USB device.

  I also install the bios acutualy (1.30), but it does not boot from the DVD drive.

  Pleas could someone help my.

  Thank you very much.
  KFSA

  It's strange. This is: If your USB device is not recognized by the BIOS or there is a problem with a CD/DVD media you are trying to use?

  I installed Win7 on my U940 satellite using pairs and IMPAIRES USB original Microsoft installation disc.
  Have you tested with different disks bootable?

• Satellite M50D-A-10Z - need USB Windows 7 drivers

  I know that my product no is not supported for win 7 but I really hate win 8: P
  I found all the drivers except the USB 2.0 and 3.0 ones. My usb do not work.

  Can any1 help me with some drivers that work for win7?

  Thank you very much.

  *@desidimsto*
  M50D-A-10Z satellite was equipped with a 8106E LAN Realtek chip.
  I guess you can get the network driver directly from the page of the Realtek driver.

  *@Ady20*
  > I found all the drivers except the USB 2.0 and as 3.0
  USB 2.0 drivers are still part of the Windows system and to get the USB ports working, the chipset driver must be installed.
  Given that the laptop was equipped with the AMD/ATI graphics chip, chipset driver was part of the package of graphics card driver. Probably the ATI graphics card driver installation should solve the problem of the USB too.
  The Toshiba page pilot EU provides special AMD USB drivers to win 8 and 8.1 Win. Have you tried to install the Win 8 driver on Win 7 system? It would be interesting to know that this driver would be compatible.

• Satellite P100: No external charger USB/Fire-Wire port

  When I plug my ipod into my fire-wire 4 pin port or a USB port on my laptop (satellite P100), it fails to load, even when it is plugged into the mains / power of a/c. I think I've found where I have to go into 'control panel', but need assistance on how to allow my son fire and USB ports give energy and charge my ipod when its connected.

  Any help on this will be greatly appreciated.

  See you soon

  Hello

  The USB ports automatically provide the power. Each USB port provides usually 500mA.
  But please note; the laptop must be running and the device external USB (iPod) must be recognized by the Windows operating system.

  I put t know if the iPod is recognized by drunks, but I read many users have problems with the iPod on the Windows operating system installation. As far as I know that iTunes must be installed if you want to use the iPod.

  Greetings

• Satellite C850D-115 - problem with USB 3.0 port

  Maybe you are my last chance to solve this problem.

  I bought a C850D-115 PSC9UE-00N00MGR without BONES. I've installed two times Windows 7 top on two different partitions.
  I downloaded and installed all the drivers needed from the Toshiba site and updated on day of Windows 7.

  My problem is, the driver for USB 3 AMD do not work,
  My 3 USB ports do not work and I cannot use it. It will work if I disable the USB 3 and use it as USB 2.

  Device Manager says driver is not installed, while AMD Catalyst Control Center says driver is installed and running.

  Someone knows how to fix this?

  Hello

  Toshiba technical page shows the laptop supports 2 x USB 2.0 ports and 1 x USB 3.0 port

  I m wondering how did you test the USB 3.0 and selected the correct port?

  You said that you have installed all necessary drivers have you installed all the drivers available from the Toshiba page?

  I found this [USB 3.0 driver v2.0.7.176 | http://www.toshiba.eu/innovation/download_driver_details.jsp?service=EU&selCategory = 2 & selFamily = 2 & selSeries = 312 & selProduct = 7516 selSh ortMod = 3620 & language = 13 & selOS = 30 & selType = all & yearu pload = & monthupload = & dayupload = & useDate = null & mode = a llMachines & search = & action = search & macId = & country = al l & selectedLanguage = 13 & type = all & page = 3 & ID = 87792 & OSI D = 30 & driverLanguage = 42]

  Have you installed it?

• Satellite C850-B635 and Win7 - card reader does not work

  My laptop came with windows 8 and the card reader was not working
  but I installed windows 7 64-bit, downloaded all the drivers on my laptop, but the card reader does not work now.

  I downloaded a driver called card reader controller, but it did not work as well
  I don't know if there is a problem or there is a driver should I install and I don't know.
  Please help me solve this problem.

  In my windows Device Manager, these devices is not recognized:
  * PCI simple communication controller
  * SM Bus controller
  * Unknown Device

  I tried searching in my page to download drivers on the Toshiba Web site but could not find these
  Please help me make my card reader works again.
  Concerning

  Post edited by: domaking

  For me, the matter is simple, and the reason why the SD card reader is not working, it's just a driver compatible isn't installed.
  My theory seems to be correct, given that the SM bus controller and PCI simple communication controller appear in Device Manager and I suppose that one of these devices belongs to the player/controller of the SD card.

  I think that you should simply install this Realtek card reader controller that I found on the page of the Toshiba UE driver
  http://Support1.toshiba-tro.de/Tedd-files2/0/CARC-20130924161048.zip

  In addition, you must install all the other drivers Win 7 as well as Toshiba tools available by Satellite C850 series.

  Very important is the chipset driver, USB 3.0 driver (Win 7 has this port driver to control the USB 3.0), display driver. etc.

  Not very essential tools are Bulletin Board, product information online Reeltime, etc. This tools additional don t improved the performance of the laptop so its up to you if you want to use these software components

• Satellite L670 - after Win 8 upgrade WIFI does not work properly

  Afteer upgrade to Win 8, the WiFi of my Satellite L670-128 has stopped working properly.

  The connection only works some time, usually only a few seconds before the connection is lost.
  After a few seconds or minutes the connection is restored, just soon to be lost again.

  Cannot download large files or even to see larger photos on normal web pages. Is there any Win8 driver for Broadcom coming 802.11n network card, or should I throw one 2.5 year old computer in the trash?

  Buy a usb-wlan card is not an option, as wireless mice is already "permanently" reserving one of the three usb ports and wlan card it would be just to the left...

  To my knowledge this L670 series isn t Win 8 taken in charge and this means that there is no special Win 8 drivers for this device, so I put t think you will find an another Win 8 driver for this WLan card.

  But do you really want to throw this laptop in the trash just because the wifi does not work properly running Win 8?
  The device was working properly under Win 7?

  I would recommend running a few Wlan test.
  For example; Disable wireless encryption on your router and Wifi connectivity with the open network do that just for testing purposes, perhaps you will need to change the type of encryption to test.

• Satellite 1900-303: DVD/CDRW (SD-R2212) does not work

  I have a Satellite S1900-303 with a DVD/CD-RW combo drive, model SD-R2212. The player has recently stopped working. The search in the drive Windows Device Manager appears with an exclamation point. Looking at the properties it shows "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19) ».

  I tried uninstalling and reinstalling the drive, but it remains the same. I even tried updating the BIOS, but that did not work. Any help?

  The laptop is running Windows XP Home SP2.

  Hello

  Try to restart the computer using safe mode, and then select last good known, who cancels at the last successful registry configuration.

  Also check this Microsoft Web page that descript this question and code 19

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/reskit/en-us/default.asp?URL=/resources/documentation/Windows/XP/all/reskit/en-us/prjk_dec_lgsc.asp

  Good bye

• Satellite Pro L10 - FN + F5 view command does not work

  When I attach my Satellite Pro to an external CRT, LCD monitor or projector, I get the same problem each end every time.

  the Fn + F key to toggle the display of control does not work.

  When I start the laptop with the attached external display device, everything is fine, and the display is exclusively channeled in the external display. but as soon as windows has started, the display switches to the screen of the laptop, and there is no way to make it back.

  y at - it an update for this problem, or another solution I know not?

  Thank you.

  Hello

  Seems to be a simple software problem.
  I put t know how long you OS runs on the laptop, but maybe some files registry entries are corrupted and therefore the FN key does not work as it should.

  Could help to reinstallation of the OS and the use of the recovery CD

• Re: Satellite L750 - advanced of the mouse settings do not work correctly

  Satellite L750 model (one month). The problem is that whenever I have start the computer, does the point of the mouse synaptics device, but retains the advanced settings that pressing on with three fingers, turn to turn, or you can use the wheel to move up and down the page. The funny thing is that is activated by clicking on the mouse icon in the control panel. Once I have access to the icon, the mouse works perfectly and is displayed in the toolbar.

  In device management, tells me that works perfectly and that the driver is up-to-date.
  Everyone thinks of any solution? Thank you

  Hello

  To be honest, I put t really understand what you're talking about.
  Do you have problems with the USB mouse or the touchpad?
  This device is not working properly: mouse or touchpad?

  The series L750 supports a touchpad with additional feature called gesture (multi-touch).
  Here you can find nice description on Synaptics how it works page.
  http://www.Synaptics.com/solutions/technology/touchpad

  In addition the parameters could be found in Control Panel-> mouse-> Advanced tab

  FYI: you can disable and enable the touchpad function by pressing the small button above the surface of the touchpad (POWER).

• Satellite A30, Win XP Pro SP3 - modem does not work

  Another problem with this laptop Satellite A30
  The built-in modem does not work.

  * Explanation: *.
  The driver is correct and downloaded from the Toshiba support site.
  The modem is identified as "Toshiba software modem amr" and is installed on com3 port.

  When I click on "diagnosis" and "ask modem" (right labels can be different, since my is an Italian win xp, I just translated the Italian labels), a window pops up saying: it is impossible to open the door (port), the modem is connected to.

  I tried to change the com port of the modem to different numbers, but the problem is the same.
  I don't know if the modem is a real map connected somehow to the main Board or is built right on the main map. It would be the first case, I may change see ad. BTW, the mini slot pci is already occupied by the gigabyte of Wi - Fi, so the modem must be elsewhere.

  This is strange, since I've done at least 2 other win xp pro on this machine facilities, always download and install the appropriate drivers, and the modem has never worked.
  Thank you
  S.

  Hello

  Have you installed the SP3 Windows XP Home edition, then the drivers or SP1 and later updated to level to the SP3 version?
  > It's strange, because I did it at least 2 other facilities on this machine pro win xp
  What other facilities?