Satellite M55 goes out when you disconnect the power cable

Hello

to unplug my laptop the plug rather than switch to the battery, my laptop turns off often simply even if the battery is fully charged. Other time things work as it should.

I did some research and my problem seems similar to that detailed here in this post.
Maybe someone knows the solution for this problem?

Thank you.

Hello Luke

As in the other topic described, you must communicate with the service and explain exactly what is happening. I fear that there may be something wrong with electronic power supply. We can just speculate on this.

I fear unfortunately there is nothing you can do alone.

Tags: Toshiba

Similar Questions

  • Tecra 9100 blue screen when you disconnect the power supply

    Hi people,

    Im having a major problem, Ive had a major problem with my tecra 9100, when I unplug the power cable and try to use the laptop on battery, the blue screen comes up saying NMI: channel check / IOCHK

    then the computer shuts down, it restarts only properley if I plugged power of ext,
    also something to note, when I unplug everything first, he's not str8, its only when I try to use the laptop, which is pressing a key

    If someone knows something about this could you please let me know

    Thanks carl

    Hello

    This has been already discussed here in the forum:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13784

    Check the sanremo poster, which refers to the knowledge base article Microsoft!

  • No alarm beep when you disconnect the power supply a L530 cable?

    With my new ThinkPad L530, I get bored of the beep when the power cable is disconnected. So far, I found no option to turn on the alarm. This feature has been removed completely?


  • Runtime for atibtmon.exe error when you disconnect the power cord

    Whenever I disconnect my power cord Windows 8 displays an error dialog box:

    Runtime error!
    Program: C:\WINDOWS\system32\atibtmon.exe
    This application has requested the execution to terminate in an unusual way.
    For more information, contact the application support team.
    Anyone with the same problem?
    Any fix for this?
    Computer: DELL Studio XPS 16

    I encountered this problem with my Pavilion DV6 after upgrade to W8 64 bit as well and is more annoying than it should be.  For what it's worth, I opened the AMD Vision Engine Control Center and disabled the "Vari-Bright" option on the power tab and which seemed difficult to get the error message every time my laptop is unplugged.  Does not solve the underlying problem and will decrease my time unplugged a bit, but I can live with that.

    Thanks for the steps, Amiarage.  Looks like we will have to just wait for ATI to fix.
  • Satellite Pro R50 crashes when you insert the HDMI cable

    Hello

    I have been using my R50 Pro Satellite (8.1 Windows 64-bit) for about a year now and there is a problem I'm hard to solve.

    Whenever I plug a HDMI cable into the laptop, the machine hangs with a black screen. Unplug the cable does not return the laptop to its previous state and does not accept orders from the keyboard. I am therefore forced to reset the machine.

    On this forum (and some others), the first suggestion is often to download the latest Intel drivers, what I did on this site:

    http://www.Toshiba.co.UK/innovation/...jsp?service=UK

    so, I am reasonably confident that my machine is up to date in this regard.

    I'm sure this problem has been encountered before, I did not find a solution yet.

    Any ideas?

    David

    Try the latest graphic driver for www.intel.com
    Also update the BIOS.

  • Why Satellite Pro A300 does not start when you press the power button?

    Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

    In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
    Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

    What should I do to get a normal departure procedure?

    When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

    When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
    The same thing happen on my Satellite A300.

  • PowerEdge T410 won't do anything when you press the power button / stop.

    My work has recently retired this t410 server. It worked without any problems when he was arrested. I had to remove and destroy the hard drives from the system. After that, I was allowed to bring home for my own use. I installed a new sata drive and plugged into the power supply and a free sata port on the motherboard. I get nothing when I tried to boot the system. This version has the unique power. Power light only lights up when you press the test button. System fan is going at full speed, but stops when you release the power button. Also on the control panel lights 1,2 and 4 and HDD power on and turn until the test button is released. There is a single green light lit on the motherboard, while it is plugged. Apart from that, I have no response when you press the main power button. Can anyone tell how to try to get it up and running again.

    -Who-

    I have not received the answers more so I think that this issue is ignored. So I'll let everyone know what finally happened. I solved my problem after a lot of electrical testing. I found a diagram of the arrangement of the power dell power supply pins and I made myself the best possible meter test. After several rounds of tests, I found several pins that did not have the right voltage. I bought a new power supply. I installed and replace everything. I plugged into the system and it auto fed on itself. I loaded from an OS and it works perfectly.

    Problem solved

  • Have HP Pavilion dv2500, won, t turn on. When you connect the power supply blinks blue.

    Have HP Pavilion laptop dv2500, p/n kn997ua #aba, does not illuminate. When you connect the power supply blinks blue.

    Now you can take the laptop at best buy or Wal-Mart and get them to plug a power cord. This will give you an idea if you need to buy a power cord or not.

    Again, you can always buy the power supply cord and if it does not return.

    THX

  • Jack was very warm when you disconnect the plug iPhone

    When my iPhone 6 supported this morning, I noticed the plug that goes into the wall was pretty hot when I disconnected the unit from the wall.  I never noticed this before.  Is it a bad sign and is it safe to use?

    On the phone under 80% charge when you unplugged? If Yes, the cube would be hot, because the phone draws more power for the first 80% of the load, it then tapers. If you have any doubts bring it to an Apple store for the assessment.

  • Satellite L850-150 starts when you open the lid

    Hello!

    I have upgraded to Windows 8 and PC (L850-150) now lights up when you open the lid.
    Is it possible that only the button turns on and off?

    For you, this document should be useful:
    [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

    A short feedback is greatly appreciated.

  • Tecra A4 does not light when you press the power button

    When I press the power on button it turns green for 4/5 seconds then turns off.
    "I do all the tests the support on the page:

    * Press on and press and hold the Fn key and press the F5 key repeatedly. If an image appears on the display, this indicates that the image has been activated to a connector for a monitor outside, causing only appear to be off the computer.

    * Connect the adapter to the computer.

    * Remove the battery and unplug the AC adapter and then connect only the AC adapter. Make sure that the power adapter is one that comes with the computer. Try to turn on the computer again, without the battery in the computer.

    * Plug the power adapter into a different plug.

    * The battery, ensure that there are enough energy to start the computer.

    * Press and hold the power switch for 10 seconds (to make sure that the computer is turned off). Wait five seconds, and then tap on and again, hold the switch for three seconds (turn on the computer).

    * Ensure that nothing beats (a sliding plastic cover) in the path by pressing the power switch.

    * Disconnect all devices (printers, pointing devices, keyboards, etc.) connected to one of the ports on the computer.

    * Remove any additional memory, beyond the computer built in memory, or the first module of memory in the computer. If the computer starts correctly, reinsert the memory and turn the computer back on. If it does not start successfully, memory can be inserted incorrectly, it may be defective or the support of memory may be damaged. "Try to replace the module memory."
    In vain:]

    You know? THX

    Hello

    There must be a hardware malfunction.
    You have tested a lot and nothing has worked
    I think there is not much to do, you all tired and I guess the authorized service provider could help you

    If your warranty is valid all should be done for free, so don t you worry and ask the experts ;)

  • Blue screen when you unplug the power of the computer dell laptop XP

    I have a dell latitude E6500... problems with blue screen when I unplug the laptop.  his past about 5 out of 10 times now.  Ive updated all recommended microsoft updates and it is still the case?  is there a driver for xp needed to solve this problem?  It only happens when I unplug the power cord and it happens as soon as I unplug

    Hello suncoastsrq,

    Usually, when we see problems during shutdown, the cause is something that loads at startup.

    To this end, I would recommend mode startup minimum troubleshooting as seen in the following articles:

    http://support.Microsoft.com/kb/310353

    http://support.Microsoft.com/kb/316434

    Please note that after refine us the cause, it is important that we return to a normal startup and manually delete the startup program.

    In addition, if we can get downloaded discharge, the community has access to them and will probably be able to determine the cause.

    You can download the dump Auggy's previous suggestion?

    Let us know.

    Best regards

    Matthew_Ha

  • PC does not start when you press the power button, after that starts automatically as a ghost!

    I have HP Pavilion a6030in, my pc does not start when I press the power button / stop ther, but she starts automatically after some time after that, it works fine.

    Even once when I closed and leave it for a while and still the problem is not resolved.

    Help, please

    I solved the problem

  • Satellite U920T - the screen goes black when you drag the keyboard

    This morning, I turned on my U920T-10 days but the screen remained black.

    At first, I thought the screen was broken, but in mode 'Tablet', the screen became. Now when I slide the keyboard the screen goes black again.

    How can this problem be solved?

    Hello

    For me, it looks like a bad connection somewhere between the screen and the motherboard.
    This could be possible reason for failure to display while sliding in and out.

    I guess this can be resolved easily and I think that it is a job for a technician (authorized service provider). I recommend you contact the service technician in your country to get the laptop fixed. I hope that the warranty is still valid in order to repair for free.

    I hope that this can be corrected. I keep fingers crossed.

  • Satellite L405D-11V - freezes and the screen goes black when you watch the video

    OK, so I have the Toshiba Satellite L405D-11V, I had a breakdown, basically, the computer freezes at any time and the screen would go black, with the fan and lights still ongoing, this could be at the start, or a few hours using the laptop, so I decided to ring Toshiba technology support and they arranged for my laptop to collect and be expelled for repairs.

    I was able to track repairs online via the tracking service and was able to see what they were doing to my laptop, he said that they have ordered a part, it was underway and the repairs are completed.

    However, I got the laptop back today, I turn it on, all right, I start using the cell phone that everything is fine, so I decide to watch a video on youtube, and it freezes again, so I turned off now pressed the power button, hoping he wasn't that a large, I turn back to and load the video once again it freezes and the screen goes black again, after that whenever I am watching a video or a game, it causes the computer to crash and freeze as before the repairs. So there is always a mistake, but I'm not sure what to do

    Its still under warranty, I bought the laptop from the Comet, but I really don't want to send the laptop for repairs again and find it comes back with the same fault, is it interesting sending distributed, maybe see if the comet will replace the laptop as its still less than a year to buy the laptop, or it'll just be useful to save all the hassle and buy a new laptop? If this fault happened to someone else, I could use you some help, and if someone could shed some light regarding what could be bad?

    Thank you

    Hey Buddy,

    You changed something on the configuration after you got your notebook back from repair? You update a driver, or something else?
    What operating system you use on your L405D satellite?

    To be honest it is really hard to say why it happens because technicians test to check if your laptop is running correctly.

    In my opinion you should try to update the display driver. Maybe it's the origin of the problem of s
    If this isn't the case, I recommend installing Windows from Toshiba Recovery disk to restore to factory settings. These parameters are pre-tested by Toshiba and should work.

    If you still have the problem, you must contact the technicians again. I mean you could track the online repair and according to your assignment, everything worked well during repair, so in my opinion he should t be a problem to contact guys exactly.
    Explain your very detailed problem. I think that everything can be clarified then. :)

Maybe you are looking for

  • Why, in Firefox, is only half top/first of a particular page visible?

    The page in question is http://www.edgewaysbooks.com/shop.htmlThe entire page is visible in IE and Chrome, but, when scrolling down in Firefox, the visible page ends at halfway. In the source code, the entire page is here. I'm not the only one who ha

  • To upgrade my Qosmio X 770 with a SSD

    Hi guys,. I ve got a P5BY5E X 770 laptop Qosmio, with a 500 GB SSH and 500 GB of HARD drive. I want to spend the drive system hard for a 160 GB SSD and now my Question. If I want to use the function of recovery there is an error. If I want to use the

  • Skype comes through my headphones, but all other sounds come through my speakers on my laptop.

    I know there are a lot of discussions about this, but none of the solutions have worked for me. I can hear all the sounds on my helmet until all the sounds from Skype, music, that I would be listening out of my speakers up until Skype is quiet. It al

  • Broken factory phone.

    I bought this phone of the manufacturer of the bike and it arrived today. Recently, I wanted to put a microSIM in this great device but I have seen that instead of three pins to drive on the SIM tray, there were only 2. And this SIM card reader does

  • delete 2d array in the while loop

    I have a table 2D being initialized outside of the loop executing a state machine, how would a clear table 2d in the while loop? I guess I'm not sure what to wire a constant matrix empty 2D too =)