Satellite M55 - S139 DVD burn problem

I tried 9 times to burn a DVD.
I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

Here is the log of my last attempt:
I 18:36:38 ImgBurn Version 1.2.0.0 started!
I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
I 18:36:38 initializing SPTI...
I 18:36:38 looking for SCSI / ATAPI devices...
I 18:36:57 found 1 DVD ± RW/RAM!
I 18:37:33 operation started!
I 18:37:33 Source file: C:\DVD. ISO
I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
I 18:37:33 Source file size: 3,606,089,728 bytes
I 18:37:33 Source file application identifier: DVD Shrink
I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
I 18:37:33 Destination media sectors: 2 297 888
I 18:37:33 write Mode: DVD
I 18:37:33 write Type: DAO
I 18:37:33 write speed: MAX
I have a link 18:37:33 size: Auto
I 18:37:33 Test Mode: Yes
I 18:37:33 BURN-Proof: enabled
I 18:37:36 filling buffer...
I 18:37:37 writing LeadIn...
I 18:37:40 writing Image...
I 18:59:19 Cache synchronization...
I 18:59:25 cycling tray after Test write...
I 18:59:29 operation successfully completed! -Duration: 00:21:55
I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

Hello

This Protocol of engraving says nothing.
These problems usually occur because of the CD/DVD media.
I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
Well, try to use Nero burning Rom program.
It s a great program and I m very happy

Tags: Toshiba

Similar Questions

  • Satellite M50 CD/DVD burning problems

    I recently puirchased a Satellite M50 with the CD/DVD Multi-lecteur. Toshiba literature indicates that it can write both write - once and several CD and DVD - writing.

    While I can burn on CD - RW and DVD - RW (DVD + RW) I can't burn discs CD - R or DVD-R (or DVD + R). The error message is something in the sense of ' does not support the driver (or reader) write once discs.

    Does anyone have any suggestions?

    Thank you

    Hello

    Well, it's not easy to say why you can t burn on some media. Maybe it s a malfunction of the media?
    Have you tried to burn CDs or DVDs from different manufacturers?
    I use TDK media and I m very happy. I found an interesting article on the CD/DVD burning.
    Check this: http://www.pcworld.idg.com.au/index.php/id;1400178792;fp;4;fpid;192

    Good bye

  • Satellite P300 19 p - CD/DVD burning problem

    Hi, I'm new to the forum and I hope somone will be able to help.

    I have DVD burning problems. When I use software engraving the image is usually copied ok and then the burning process starts, which usually lasts only a few moments, then the machine spits out the disc burnt and wasted.

    I usually use Corel DVD Copy 6, but have you tried TOSHIBA and other programs such as NERO. With the help of Corel VideoStudio, it burns discs with a success rate of 90%, but the problem comes when you try to copy my own created disks.

    I tried different types of discs (that is to say + R and - R), and I also tried burning speeds.

    Anbody else suffers from this problem?

    I have managed to find an error code 06077-26 - 2A 040902, made this average anyhting for anyone?

    TEMPRO alerts appear to have provided updates firmware for a number of other DVD players, but not for my machine? Maybe it's due a? All the drivers are up to date.

    Thanks for listening and the anybodies help is more than welcome.

    See you soon.

    In my opinion, you should not think about buying replacements. If you think that the drive does not properly contact service. If necessary the reader will be replaced free of charge.

  • No sound after upgrade to Vista on Satellite M55-S139

    I just put a laptop Toshiba Satellite M55-S139. I added a 1 GB RAM and everything seems to work, even the Aero Interface.

    However, I have no sound. Vista indicates that the device is working properly think it works, but I don't hear anything from the speakers or the headphones. I uninstall the program from Toshiba Virtual Sound that Vista has complained that it was not compatible.

    The sound is a "RealTek AC97 Audio". Thanks in advance for any help.

    Maybe the audio driver that is installed on your laptop is not compatible with Vista.
    Search this site realtek more audio drivers:
    http://www.Realtek.com.tw/downloads/

    and try the diver SoundMAX Integrated Digital Audio.

    Maybe it helps...

  • Re: Looking for Satellite M55-S139 driver

    From what I can tell, this error of unknown EVIL device on my laptop, Satellite M55-S139, is due to a missing ACPI driver.

    I can't find this driver.

    Please, please, can someone help me find the driver for a Satellite M55-S139 for Windows XP ACPI?

    Thank you kindly.

    The Satellite M55 was designed for the American market.
    Then you should take a look at the Toshiba driver site us.

    This:
    http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  • DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. Now, I've added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers, and a stop at 01:29:32:17 (th

    DVD burning problem: I burn the movie on widescreen PAL on a DVD-R disc. I managed it burned without menu. I have now added a "Pan and Zoom" menu with a main marker at 00:00:00:00, 21 scene markers and a cleat to 01:29:32:17 (the end of the film). The combustion is interrupted with a message to watch a C:\Users\ianle_000\Documents\20151206160446.iso file. There is no file. The message also provides a link for an explanation. This Web page is impossible to obtain. I'm running on a PC with Windows 8.1.

    Thank you once again. I burned the DVD!

    It is the first film for which I have reached the stage of burning. I'm not sure why she didn't in the first place. I tried to burn the "no menu" version, but at the time, was shot the DVD itself - I wonder when he reached this point?

    So, I burned the "no menu" version to another DVD, that worked, then the version of menu, with no cleat to a third DVD, which reads perfectly.

    Now that I have a successful routine, I'll stick to it.

    Thanks for all your help.

    I'll close this discussion now.

  • Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

    Hi all
    I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
    Here is the log of my last attempt in writing, file a NERO DVD:

    1C82-0010-8011-0000-1454-2737-5268

    Windows XP 5.1
    IA32
    WinAspi: -.
    Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32

    NT-SPTI used
    Nero Version: 7.0.1.2
    Internal Version: 7, 0, 1, 2

    Recorder: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
    Adapter driver: HA 1
    Drive buffer: 2048kB
    Bus type: default (0)-> ATAPI, detected:?
    CD-ROM: Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
    Adapter driver: HA 1

    = Scsi-device-map =.
    DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
    CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on

    = CDRom-Device-map =.
    CARPET * a DVD - RAM UJ-years 840 D: CDRom0
    =======================

    AutoRun: 1
    Excluded drive IDs:
    WriteBufferSize: 73400320 (0) bytes
    ShowDrvBufStat: 1
    BUFE: 0
    Physical memory: 502 MB (514480 KB)
    Free physical memory: 160MO (164772kB)
    Memory in use: 67%
    QUERIES PFiles: 0x0
    Use consultation: 1
    Global Bus type: default (0)
    Control supported media: disabled (0)

    14.5.2006
    Compilation ISO
    15:18:55 #1 text 0 file Isodoc.cpp, line 6411
    ISO document burn settings
    ------------------------------------------
    Determine maximum speed: FALSE
    Simulate: FALSE
    Write: TRUE
    Finalize the CD: REAL
    Multisession: FALSE
    Burning mode: DAO
    Mode : 1
    : ISO 2 (31 characters)
    Character set: ISO 9660
    Joliet: TRUE
    Allow pathdepth more than 8 directories: TRUE
    Allow more than 255 characters in path: TRUE
    Write ISO9660; 1 file extensions: TRUE

    15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of memory

    15:18:55 #3 text 0 file Reader.cpp, line 124
    Player running

    15:18:55 #4 text 0 file Writer.cpp, line 113
    Writer D: MAST * A DVD - RAM UJ-race years 840

    15:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
    First address writeable = 0 (0x00000000)

    15:18:56 #6 text 0 file Burncd.cpp, line 3302
    Turn on Disc-At-Once, using DVD media

    15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
    Last possible write address on media: 2295103 (510:01.28, 4482 MB)
    Last address to be written: 2288159 (508:28.59, 4469 MB)

    15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
    Write in overburning mode: No. (enabled: CD)

    15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
    Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
    Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
    Disc Application code: 0, extended information indicators: 3

    15:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
    > Protocol of DlgWaitCD activities:
    =========================================

    15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
    CIS (after recorder preparation)
    0: TRM_DATA_MODE1)
    2 indices, index0 (150) not provided
    #0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
    relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
    --------------------------------------------------------------

    15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
    Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
    DAO infos:
    ==========
    MCN:
    TOCType: 0x00; Session closed, fixed disk
    Tracks 1 to 1:
    1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
    Introduction DAO:
    ===========
    __Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
    0 | Lead-in | 0 | 0x41. 0x00
    0 | 1. 0 | 0x41. 0x00
    0 | 1. 1. 0x41. 0x00
    2288160 | Lead-out | 1. 0x41. 0x00

    15:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

    15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
    Caching of files started

    15:18:56 #15 text 0 file Burncd.cpp, line 4132
    Cache writing successful.

    15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
    Caching of files completed

    15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
    Burn process started at 8 x (11 080 KB/s)

    15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
    Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #0

    15:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
    -A DVD structure: physical Format information (00 h).
    Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
    Book type: DVD + R (10), part Version: 1.0 x (1)
    Disc size: 120 mm, maximum speed: (h F)
    Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
    Linear mass: 0,267 um/bit, track density: 0.74 um/track
    Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
    End number of physical sector of data area: 26053F h
    End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
    There is no data in Burst cutting area (BCA)
    Disc Application code: 0 / 0 h
    Scope of Information indicators: 3 h
    Disc manufacturer ID: MBIPG101
    Media type ID: R04
    Product revision number: 1
    Number of bytes to use physical format information in ADIP up to byte 63:56
    Particular media [16.63]:
    00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
    23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
    01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...

    15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
    Begin to write his address to the LBA 0
    Mode high compatibility DVD: Yes

    15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
    D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Printing Code: 0x11
    Meaning of Qual: 0x00
    The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
    Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
    Buffer x05e50000: Len x 10000
    0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
    0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
    0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B

    15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
    Unrecoverable read error
    D: MAST * A DVD - RAM UJ-YEARS 840

    15:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
    all writers idle, stopping conversion

    15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
    conversion idle, stopping reader

    15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
    D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Detect Code: 0 x 73
    Meaning of Qual: 0x03
    The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
    Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

    15:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
    D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
    Key: 0x03 (KEY_MEDIUM_ERROR)
    Detect Code: 0 x 73
    Meaning of Qual: 0x03
    The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
    Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 03

    15:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
    Generating borders high compatibility DVD

    15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
    Production DVD borders completed successfully

    15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
    Burn process failed at 8 x (11 080 KB/s)

    Existing drivers:
    File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
    File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)

    Registry keys:
    HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)

    Hello

    I can't find any strange or mysterious messages in the log file.
    You suggested that the drive can burn CDs but not DVDs.
    The calibration lens dysfunction is sometimes responsible for these issues.
    Unfortunately, I have no solution for this problem. The replacement drive must resolve.
    The unit is fairly new in this case, you should ask for help ASP.

  • Satellite L755 - CD/DVD burner stopped burning

    I have a Satellite L755 systems running Windows 7 SP1 which is 11 months old and recently had to get back original which I did without any problems, but I have now discovered that my CD/DVD burner stopped burning. It can read, play music and video, but will not burn. I tried a few different programs to see if it worked, but still the same thing happens.

    The reader is going through the motions and runs for the duration then spits out the CD/DVD and there is nothing about it. When I re - insert, he asks what I want to do with a blank disc.

    Any help would be appreciated

    Thanks for reading

    Have you tested with Nero and different empty media such as CD-R/RW, DVD - + R/RW and also different brands?

  • S good for Satellite 1400-253 DVD burner need

    Could someone give me the part number for the Toshiba dvd writer/burner
    or offer any compatible dvd burner to fit one

    Computer portable satellite 1400-253 s (ide connection)

    Thank you

    Satellite 1400 is old model of laptop and it comes with several different optical disk drives, but none of them was DVD burner. Currently, these discs were not available.
    Due to this fact, you will not be able to find info on compatibility.

    If you need the list of compatible readers let us know but none of them is DVD burner.

  • Satellite M55-S139 - no visible wireless network card

    Hello

    Already my Atheros said "great connection" and in fact some programs could run on the wireless internet but no web browser wouldn't work.

    Today, I bought a new router Belkin N +, and it's the same problem.

    I downloaded the drivers here

    http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1132275& rpn = PSM53U & modelFilter = & SelCategorie = 3 & selFamily = 10 73768663

    First of all, I put it XP and Wi - Fi and got the top pilot, which did nothing.

    I then really messed up and apparently forgot to put it in this way, all OS and all categories left and ran

    ACPI Flash BIOS version 1.90 for Satellite M55 (PSM53U) (v1.90; 2007-01-27; 3 M)

    and now it's worse than ever. It's like I don't even have a wireless card. No way to attempt to display wireless networks. Atheros options are all gray, there is no system for a wireless connection bar...

    I'm at my wit's end.

    All the tips are sincerely and greatly appreciated.

    You are right. Network adapter is correctly installed, but as I can see, WLAN driver is missing.
    Then please visit the U.S. Toshiba download page, and download driver WLAN for your laptop model.

    I do not know what operating system are you using and I can't say with certainty which driver is the right one.

  • I can build in the Satellite Pro 4600 DVD burner?

    Hiya

    Can anyone help with this? Has anyone equipped with a DVD burner (dvd - rw drive Toshiba sd-r6252)?
    Which models are compatible? I'm good fight opening and Exchange.
    Compatibility just in fact know.
    Thank you

    Hello

    I put t found any information if this drive is compatible with the Satellite Pro 4600, but you should be careful to replace the drive.
    You should check the dimensions of the car. Very important is the drive (master, slave, csel) settings because it is not possible to change this settings as on the usual desktop drive.
    I'm not sure about the settings on the Satellite Pro 4600 but the ASP Toshiba should know that.
    You can also order the caught player supported by the Toshiba service partner in your country.

  • For Satellite Pro 2100 DVD burner?

    I have a Satellite Pro 2100 which has a CD-RW/DVD-ROM drive and I would like to upgrade to a DVD burner but don't want an external. Could someone tell me which drive is compatible with the model number and where I can get hold of one? Can I get a Toshiba direct? Nowhere would really suit me I need to get one, but just don't know what I can and can not use! Thank you.

    Hi Jamie

    Unfortunately, he was unable for me to find this DVD burner, but if you want to update or change some parts of your laptop the best way is to ask ASP for compatible devices and supported.

    Good bye

  • Satellite P200-1ay - DVD burning is not working properly

    Hey

    last month my dvd burner works very badly.

    I tried different types of media (Platinum/sony dvd + r), but every time it has happened in the last part of the dvd.

    Sometimes, he finished a dvd but in a standalone player, it will shock.

    New firmware may work, but I'm not now, I have a Ts-Lo802a with firmware t035.

    Hello

    You should take a DVD R TDK.
    I mad a goo experience with this kind of DVD disc.

    I had a similar problem. My burned DVD didn t work in one of my DVD players.
    A player can read but the other n t.

    I tested the TDK DVD-R and it worked on both players

  • Satellite L300-1BW - DVD burner is not found

    I have just updated to Windows 7, but now I can't find the DVD burner - from what I understand I need the driver, but don't know which.

    Help much appriciated x

    I had the same problem after upgrade to win 7, remove the upper/lower case filters problem solved in my case:

    http://APS2.toshiba-tro.de/KB0/TSB7801XL0000R01.htm

    or

    http://support.Microsoft.com/

    should work...

  • CD/DVD burner problems said that it is damaged or missing? Anyone has any ideas to help me solve this problem?

    Hello, I'm trying to fix my burner but I tried to uninstall and reboot my computer to see if the problem might be to set but he told me that my driver cd is missing or damaged, and I don't know what to do besides put my computer back to factory settings. So if anyone knows something I can do like that I don't have to put it back to factory settings it would be great.

    Remember - this is a public forum so never post private information such as numbers of mail or telephone!

    Ideas: My CD/DVD burner does not work and it is said that it is damaged or missing. How can I fix it?

    • You have problems with programs
    • Error messages
    • Recent changes to your computer
    • What you have already tried to solve the problem

    Hello

    Step 1: Please do all the same underneath if you did some before as is often total
    a process that solves the problem.

    Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
    Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
    RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
    below.

    Then, work your way through these - don't forget the drive might be bad, could be a coward
    cable or slight corrosion on the contacts (usually for a laptop) and other issues.

    Your CD or DVD drive is missing or is not recognized by Windows or other programs
    http://support.microsoft.com/kb/314060 - a Mr Fixit

    Try this fix manually if the Fixit 314060 does not work
    http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

    Your CD or DVD drive is missing or is not recognized by Windows or other programs-
    a Mr Fixit
    http://support.Microsoft.com/kb/982116

    The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
    for Windows Vista
    http://support.Microsoft.com/kb/929461

    When you insert a CD or a DVD, Windows Vista may not recognize the disc
    http://support.Microsoft.com/kb/939052

    Your CD or DVD drive cannot read or write media - A Mr Fixit
    http://support.Microsoft.com/GP/cd_dvd_drive_problems

    CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
    Vista installation after booting from the DVD (AHCI)
    http://support.Microsoft.com/kb/952951
    Drive CD - R or CD - RW Drive is not recognized as a recordable device
    http://support.Microsoft.com/kb/316529/

    Hardware devices not detected or not working - A Mr Fixit
    http://support.Microsoft.com/GP/hardware_device_problems

    Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
    ends. Remove and replace, do not just tight. For laptops, you can often clean power and
    contacts data with a pencil eraser.

    Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
    manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

    ===============================

    Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
    Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
    do it right.

    Did you follow the Troubleshooting Guide for the reader who still does not work? There are
    the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

    Check with your Maker system and a device for the two possible firmware updates and
    the correct registry entries for your car.

    Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
    as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
    the parameters.

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    -----------------------------------------------------------------------

    You can probably find more info here and maybe even the exact registry for your CD/DVD settings
    drive from someone with the same model.

    Forums - a lot of expert real help
    http://Club.myce.com/

    CD/DVD units
    http://www.myce.com/storage/

    Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
    nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

    DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
    devices and their properties in flat table, instead of the tree viewer
    http://www.NirSoft.NET/utils/device_manager_view.html

    I hope this helps.

    Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

Maybe you are looking for

  • How do you know if that he is in charge. No light

    is there a way to say that the TV remote is charging. I do not see a light

  • Time Capsule or airport repeatedly loss of internet connection

    Greetings, Last month, I had a problem with my Apple Time Capsule and my cable company router intermittently lose Internet several times a day between.  This has happened several times a day.  My Time Capsule, Airport utility would show a 'green' sta

  • Satellite 2410-515: Message pop-up - apsInitialize not found

    When I opened the computer: 2 messages pop up: The entry point for the "apsInitialize" procedure is not found in the library of links Dynamics wlanapi.dll «»The entry point for the "apsSearchInterface" procedure is not found in the library of links D

  • TC01 spreadsheet Logger tweeks

    I recently bought the device USB-TC01.  Before buying, I called and asked to check that the sample application will record temp at least 2 decimal places.  Told me that he will do so.  After receipt of the product, I found that the software that come

  • Why you have disabled my account?

    ive never done anything illegal or sent something not right, back on my acct or I will move to another ISP. It's terrible!