Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)

Similar Questions

• Satellite M55-S325 - error when starting of the OS and reinstall

  OK, so I got the Satellite M55-S325 for awhile.
  But after a while, he started to read errors when trying to log on to my normal account, so it me logged on temporary.
  After you perform a system restore and go back to my old account, I backed up my work just in case it happened again - and he did.

  This process is repeated several times until the laptop has reached the point where it starts... the windows splash screen appears, but after it is loaded, it will restart and go to the crash of the screen where I have the option "Start windows normally", when I press this option, he repeats the entire process of restarting after the splash screen.

  I tried to reinstall the operating system, and it worked once. It has been fully functional for a few days after I installed the necessary drivers. But then it happened again (the repetitive cycle of rebooting). Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.

  Someone has an idea of what's going on?
  What is the motherboard, or a damaged drive? Maybe something wrong with the BIOS? I have to get a new HARD drive if it's associated drive?

  Any help would be appreciated, thanks.

  Hello

  > Now it wont let me re - install the OS... it keeps reading error disc as soon as I clicked the quick format NTFS option.
  I think that this could happen due to HARD drive failure if you get an error during reading of data from the HARD drive then the first device that should e tested is the HARD drive.

  If you n t want to buy a new disk only to run tests, then you could contact the mobile technician who could check the HARD disk and could eventually replace them.

  Welcome them

• Satellite A80 129 DVD-RAM write speed problem

  Hi all!

  I have a problem. the thing is that I want to write in NERO 6 (last version purchased) a CD or DVD, but we will only write to me at slow speeds. In this laptop I MAST * a DVD-RAM UJ-830 s with DVD-R 8 x and 24 x CD - R write speed said.

  When I try to write on a CD it gives me only 16 x write speed, then where is x 24? It goes same for DVD, as I want to burn DVDs and it gives me only 2 x write speed.

  Please, do not put this fault on a CD or DVD, cause in my country there are limited suppliers of this type of media, so I won't change my media. They worked with my previous PC CD - RW fine, no speed problem.

  I want to know also if this is lack of DVD - RAM, where then find firmware for this burner?

  Thanks for your replies.

  BR, Kekec

  You should try to update nero, it might solve the problem.

  Also an update of the firmware can help, go to http://www.toshiba-europe.com/storage/index.asp?nav=HOM&page=HOM&frame=home

• Satellite M55 - S139 DVD burn problem

  I tried 9 times to burn a DVD.
  I tried several software programs including InterVideo WinDVD came with the laptop, DVDFab Decrypter and those that I use most of the time, DVDShrink and ImgBurn.

  The log of the software indicates success, but most of the DVD will not play back - even on my laptop. Most of them won't open even - it just keeps telling me to insert a disk in the drive.

  Only once, I successfully burned a part of a DVD with InterVideo, and I could play on my external DVD player. But I was not able to duplicate my success (and only partially burned - perhaps InterVideo's just a demo). I tried to save as an ISO image and also just the files.

  I'm using Memorex DVD-R. Can someone help me please! I tried the DVD forums and nobody knows the answer. Is this a hardware problem?

  Here is the log of my last attempt:
  I 18:36:38 ImgBurn Version 1.2.0.0 started!
  I 18:36:38 Microsoft Windows XP Home Edition (5.1, Build 2600: Service Pack 2)
  I 18:36:38 initializing SPTI...
  I 18:36:38 looking for SCSI / ATAPI devices...
  I 18:36:57 found 1 DVD ± RW/RAM!
  I 18:37:33 operation started!
  I 18:37:33 Source file: C:\DVD. ISO
  I 18:37:33 file Source sectors: 1 760 786 (MODE1/2048)
  I 18:37:33 Source file size: 3,606,089,728 bytes
  I 18:37:33 Source file application identifier: DVD Shrink
  I 18:37:33 device destination: [1:0:0] MAST * a DVD-RAM UJ - 841 S 1.50 (D (ATA)
  I 18:37:33 Destination Media Type: DVD-R (disc ID: RITEKF1) (speeds: 1 x, 2 x)
  I 18:37:33 Destination media sectors: 2 297 888
  I 18:37:33 write Mode: DVD
  I 18:37:33 write Type: DAO
  I 18:37:33 write speed: MAX
  I have a link 18:37:33 size: Auto
  I 18:37:33 Test Mode: Yes
  I 18:37:33 BURN-Proof: enabled
  I 18:37:36 filling buffer...
  I 18:37:37 writing LeadIn...
  I 18:37:40 writing Image...
  I 18:59:19 Cache synchronization...
  I 18:59:25 cycling tray after Test write...
  I 18:59:29 operation successfully completed! -Duration: 00:21:55
  I 18:59:29 average write speed: 2 713 KB/s (2.0 x)-Maximum write rate: 2 800 KB/s (2.0 x)

  Hello

  This Protocol of engraving says nothing.
  These problems usually occur because of the CD/DVD media.
  I put t know if you tried, but you should check out the various media CD and DVD from different manufacturers.
  Well, try to use Nero burning Rom program.
  It s a great program and I m very happy

• Satellite M30X-144 DVD - RAM cannot read DVD

  Hello

  I have a portable Satellite M30X-144 and I'm having a problem with my DVD player (Mat * a DVD - RAM UJ-8315).

  I can play CDs, but when I put any kind of DVD in there, it does not read anything.

  What can I do to solve it?

  Hi João,.

  you have a problem with your DVD player? I suggest the following:

  Remove the disc in the "device manager" Windows, let windows reinstall, test if it works. If the same problem persists contact an ASP in local (certified partner)
  because your drive is probably faulty then your machine should be checked by a qualified technician.
  Here is a site where you can find the nearest ASP:

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_gaspLocator.jsp?subs=TAIS

  I hope that I helped you a little bit of the problem of your Satellite M30X. ;)

  Greetings from Croatia

• Satellite P10 - 554 dvd - ram does not work

  I got a Satellite P10 554, and as I said above the RAM does not work.
  It should be a software problem, because if I reinstall the drivers it works a few minutes (it did until now yesterday it stopped completely)
  It is impossible to install the new drivers or update a firmware somehow
  (pilot: after rebooting, the old drivers are loaded again (but I uninstalled them))
  (firmware update: I still got the message: invalid drive to update f/w)

  I hope that someone of you can help me ;)

  Hello

  What did you mean with the work of t car doesn?
  You are not able to burn or read the media?

  The error message says it all. I think you re not able to update the firmware because the firmware is not supported on this drive.

  Try to remove the drive from Device Manager, and then shut down the laptop.
  Usually after restarting again the operating system should recognize the drive again.
  If this does not help, you can try to remove the drive from the laptop. Turn on the unit, then go into windows. The reader should disappear. Then stop and reset the drive in the notebook. After this procedure the laptop must load the firmware again.

  It will be useful.

• Satellite A135-S2386 - DVD - RAM drive problems

  Hi guys, I have a Toshiba Satellite A135-S2386.
  I had once repaired because it is over heated and died.

  One problem I noticed, the fool who fixed, he didn't put it back correctly, and the DVD player has been hot glued...
  I fixed in March, April. But I'm used to, I can anyway...

  However, there is a significant problem.
  Written DVD player and bed PERFECTLY well in windows, however it cannot not be detected in the BIOS or what not.
  As XPInstallation Windows, Vista install detects it but BIOS can't.

  Can I update the firmware of the DVD-RAM? It's years Panasonic UJ-840.
  Or I can update the BIOS of the machine itself?

  You can boot from the CD? If the boot of CD work, then the BIOS is to see it properly.

  You could try an update of the BIOS anyway, go to http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp

• Satellite Pro U200: DVD - RAM cannot read media

  Greetings

  I have a problem with a carpet * a DVD-RAM UJ 8425 in my notebook U200.
  When I insert the CD or DVD in the engine, it cannot read the media.
  The engine starts and runs disc twice or three times, then turn of.

  I have this laptop for 2 months, and only since yesterday, I have this problem.
  In Device Manager it is shown in working order,
  I have change the driver but it's still doesn't work...

  Can you help me to find out where is the problem?

  Hello

  It will be interesting to know does this happen with all sorts of data on the disks. Try checking Autoplay options in the ODD properties.

  By the way: you can see the contents of the disc in Windows Explorer?

• Satellite P100-444: DVD-RAM UJ-850 s stop working - error Code 39

  The DVD_RAM stop working.
  Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39)
  It is showing drivers cdrom.sys.

  How can I find new drivers for UJ-850 s?

  Hello

  First of all: you can not download the driver for the CD/DVD drive. The Windows operating system uses the own driver and it s not necessary to install a special driver for ODD.
  Therefore, the link provided by the user above won't HELP YOU NOT.

  Second: I studied in this forum a bit because many afterwards with the same problems, where already posted:
  Check this example:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=13843&MessageID=50483

  You will find a link to the MS site that provides a nice solution.
  Please try the first method:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

  Keep us in the loop

• Satellite P100-275: DVD - RAM drive is always detected at startup

  Hello

  I have a problem with my Satellite P100-275, all materials are installed correctly, but when the PC starts, I always "new hardware found" for: hl-dt-st dvdram gma-4082n.

  I tried to install the connection to Internet, I tried with the driver c:\toolscs\DVDRAM software\Setup.exe, but nothing seems to work.

  Here is the screenshot of the hl-dt-st dvdram gma-4082n in materials:

  http://img209.imageshack.us/img209/7326/materialsza4.jpg

  Thank you

  Hello

  Is this original delivered by car or did you upgrade?
  By the way: as far as I know if you use the original recovery with original configuration hardware delivered media, everything should work well. If you change something about yourself, it is possible that something is wrong. Usually, for DVD player, it is not necessary to install a special driver and because of that, I'm a little confused why this message occurs at the beginning upward.

  Please give us more info on this drive.

• Satellite M60-139 DVD player

  Hello, I freshly bought the satellite M-60-139 straight. Unfortunately the DVD doesn't recognize correctly (burn it with Nero) so that I can burn only with 2, 4 instead of 8 years facher speed. Firmware update is not not qualify into the net for the carpet * a DVD RAM Uj-years 840 firmware 1.52. Support (Hotline) knows the problem, has however no solution. Who can help?

  Hello

  In my opinion you shouldn't start with updates or even the installation of the firmware. The device is new and try to test it out first. 8 x burning speed is just for the DVD-R virgins. I hope that you use the latest version of Nero and DVD 8 x burning speed rewritable media. If there is a possibility try to test with a few different blank DVD burning speed.

  Good bye

• Satellite M55 - PCI modem and Ethernet controller continue missing

  Hi all

  I got this Satellite M55 quite a few years and until now it works really not too bad for me apart from a few minor errors here and there...
  Just recently, I sometimes have some hard to connect to wireless internet.
  It could always be connected only after hitting plugged in at least 2 or 3 times, and the connection is not persistent in time.
  When I look on the computer management, it seems the Ethernet controller and PCI Modem are missing. I tried to search and re - install drivers associated with wireless local area network and so forth, but stops the error.
  This advice would be really appreciated!
  Thank you in advance.

  Configuration:
  Satellite M55 S325
  Window XP Pro
  Intel PROSet / Wireless

  Hello!

  Where is - it has you fact check for drivers? Normally, you will get all the drivers on the Toshiba site:

  http://www.CSD.Toshiba.com-online download-online portable => Satellite-online M55-S325

  I searched this site and I founded all the drivers.

  Good bye

• No sound after upgrade to Vista on Satellite M55-S139

  I just put a laptop Toshiba Satellite M55-S139. I added a 1 GB RAM and everything seems to work, even the Aero Interface.

  However, I have no sound. Vista indicates that the device is working properly think it works, but I don't hear anything from the speakers or the headphones. I uninstall the program from Toshiba Virtual Sound that Vista has complained that it was not compatible.

  The sound is a "RealTek AC97 Audio". Thanks in advance for any help.

  Maybe the audio driver that is installed on your laptop is not compatible with Vista.
  Search this site realtek more audio drivers:
  http://www.Realtek.com.tw/downloads/

  and try the diver SoundMAX Integrated Digital Audio.

  Maybe it helps...

• supports matshita dvd - ram uj-850 s NOT recognized, Mats_run.dvd cancel installation of PowerShell

  Updates in security plague devices on my Toshiba Satellite? Matshita dvd - ram uj-850 s can notrecognize the media .  I tried to run Mats_run.dvd.exe and it cancels the installation of PowerShell and said run again later.  I checked the registry for PowerShell and he's not here.

  Updates are downloaded automatically but are installed manually. Microsoft.NET Framework 3.0 is installed.  There are 2 hard drives usb, e and h. The internal hard drive is c and the dvd drive is d.

  I downloaded PowerShell for English x 86, and it also cancels the installation.  This facility will write on e drive unless the e reader is currently offline.  It seems to me that installation should go in one of the program files. No matter what.

  I heard Japanese factories to boost productivity by having models of foremen (also known under the name of straw bosses) in the break for whacking room. MicroSoft is expected to provide a game that allows you to the storm of MicroSoft when you feel frustrated. Laugh for everyone.

  I tried the registry filter entries delete and it does not correct.

  The drive reads some DVD.  The one I use is readable on other computers and was burned at the origin of it. This drive is able to read the DVD right here.

  DVD with files on them are not read.

  I cleaned the drive with a DVD-rom cleaner.

  Audio_TS, Video_TS structure is recognized on a DVD so that the reader is able to read the DVD.  It seems to be a Windows problem.

  Combustion works very well.

  Hey, Arch.

  I suggest uninstalling the drive in Device Manager and restart the computer.

  If this does not help, you can try to uninstall all your computer disc burning software, if you have the means to reinstall, and then reinstall the drive.

  The Powershell do not install cannot be bound.

  I suggest to run a full system scan after you have updated the antivirus definitions.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• DVD writing error Mat * a DVD - RAM UJ-850 s on Satellite L30-113

  I have Toshiba Satellite L30-113 psl33 with Mat * a DVD - RAM UJ - 850 s. operating system is Windows XP SP2.

  This drive read and write CDs, play DVDs, but don't write DVD the last time.
  After inserting DVD the status of the device in 'My computer' change to 'DVD RAM' on 'CD RAM.
  After the attempt to write, the errors are "Gage power error" and "not full disk at a time.

  Writing at the beginning of the DVD is OK.

  In your opinion, is it soft or hard error?
  Must I update DVD-driver or the replacement of the DVD player?

  Hello

  > I need I update DVD-driver or the replacement of the DVD player?
  Usually the ODD driver is part of the Windows operating system.
  Windows uses the internal Microsoft driver that controls the ODD.

  In any case, the European driver Toshiba page contains a DVD - RAM driver. This driver gives you more support for your DVD RAM drive.
  I m not very good if it will help you, but try to reinstall and check if the drive will be CD - RAM DVD-RAM

  See you soon