Satellite M55-S3292: change the American keyboard to the keyboard UK

Similar Questions

• Satellite M55 - I need the repair manual

  Hello

  I'm new to this forum and I'm hoping to get some info.

  I am need of a repair manual for my laptop M55. Can someone tell me where to go for this manual?

  Thanks fopr any help.

  Bill Olivier

  Unfortunately, repair manuals is not a public document and is not free to download.
  In General, change the HARD drive is not complicated and on most phones models can be made easily.

  I have European Satellite M50 and the HARD drive is under the cover of the HARD drive. You can find it on the lower side of your laptop.
  It is the largest. Remove this cover and you will see how the HARD drive is fixed.

• Satellite P70-A01D: change the drive letters after the 2nd SSD upgrade

  I think it's a generic UEFI / Win 8.1 question (not according to model).

  However, FWIW, I have a Satellite P70-A01D (bought locally here in Australia).

  It is a victory of 16 GB 17.3 inch Gen4 i7 4700MQ Intel HM86 8.0 64-bit RAM.
  http://www.MyToshiba.com.au/products/computers/satellite/P70/psplpa-01d002/specifications

  I updated the OS to Win 8.1

  The P70 is supplied with a drive Bay HARD vacuum #2 - I bought a 250 GB Samsung 840 EVO SSD that I want to use as the main system disk / boot Win 8.1.

  I installed this SSD in bays #2 and from there I had no problem using the wizard of Samsun cloning software provided with the SSD (VCC 4.0) to clone my 1 TB on the SSD system.

  There are a lot of instructions from Samsun and around the web on how to clone and "substitute" of a HDD with a SSD - however there are much less when it comes to 'Add' the SSD - in the #2 Bay - while always keeping the original HDD fully functional as an additional drive.

  After execution of the cloning software, I tried just go into the settings of the UEFI on reboot and change the order of the boot drive placing the SSDS over HARD drive.

  It worked but there are obviously questions still as I had not renamed readers SSD worked as system but he was editing as D: and HARD drive was still C: and most of the system/application paths were always scheduled to access C:!

  It led to the crash and restart cycles of the Bureau (? & or explorer.exe?) and two consistent error messages:
  -"SkyDrive engine Sync host has stopped working".
  -"Host for the synchronization setting process has stopped working".

  I saw in the Control Panel-Administrative Tools-Computer Management-Online Storage-online-online right click on each drive disk management online online that I can access > however
  (a) I'm not sure if the solution I need is this simple;
  (b) nervous about change of letter on a disk while running the system; and
  (C) uncertain steps in order of evolution [IE. C: (non - sys) becomes M; D: (sys) becomes C:...

  At the moment via UEFI I'm back to working with the system on the HARD disk rather than on the SSD seems stable and without compromise of my screwing around!

  Apologies for the long post by train to make sure to include all relevant information. I think that my final goal is double win bootable 8.1 / Ubuntu 12.04 of the SSDS probably with Ubuntu on a 50 GB partition leaving 200 GB (enough?). I want to keep a slab of SSD space available for photo and video editing: +/-100 GB!

  I wondered simply assign new letters to readers, however the notes at the bottom of http://windows.microsoft.com/en-au/windows7/change-add-or-remove-a-drive-letter state:

  You cannot change a drive letter if the drive is a system partition or a boot partition.

  Suggestions please?

  Hello

  I think you could try to change the letter to readers as suggested in the Microsoft article.
  Where this is not possible, try to use 3rd party such as GParted software.
  http://gparted.org/LiveUSB.php

  You could try changing the drive letters might start to the top of the unit using the live USB version.
  But it might be possible that your system would not initialize correctly after this change.

  So you should not forget to mark the partition as bootable.

  Your comments would be appreciated

• Satellite Pro P200: Change the size of partition in Vista?

  Is it possible to adjust the size of the partition after installing?

  I have a Satellite Pro P200 with a shared about HARD disk:

  C: Vista partiton - 17 GB of free to 56 GB
  E: partition of data of-54 GB of free to 55 GB

  I know that the data reader is used by Vista to contain information of recovery.

  However, I would like to know if its possible to reallocate some of its spare production capacity at the Vista drive without compromising the recovery feature?

  Of course, you can change the size of the partitions after Vista installation.

  You can change this in the Vista Disk Manager s

  Here, you could choose the existing partition, and then you could reduce the amount of partitions. This free volume can be added to another partition, or you can create another partition.

• Satellite A660/07R - change the shared memory

  I have an A660/07R y at - there a way to change the system memory that is shared on this subject, he has a card geforce 350 m 3d mink?

  Hey Buddy,

  Shared memory quantity can't be changed because it will be controlled automatically.

  But I m wondering why you ask for this as far as I know the Satellite A660 with nVidia GT350M card has own graphic memory (1 GB). This memory will be the only graphics card.

• Can satellite A350 - I change the media player on CD/DVD button?

  Is it possible to change the media player by default on the CD/DVD of the service/media keys button?

  The default is Windows media player and I want to change it to VLC player or itunes...

  Hello

  I checked the manual of the Satellite A350 and I founded the following information:
  Toshiba Button Support: This utility controls the following computer button functions: cut the buttons and CD/DVD. The application of departure since the button can be changed.

  So for me it sounds like this it of possible to change it.
  On my Qosmio laptop I can change this if I start the Toshiba assist, and then you can choose the Toshiba button support. Here, you can register another application.
  Check it!

  Welcome them

• Satellite 5100 503: change the HARD drive and start questions

  My hard drive in my Satellite 5100 broke down and I want to change it.

  According to various posts in the forum, it is not possible to start the 5100 from a CD when there is a (new) hard drive in the machine. And the only way to change the boot sequence is via Windows - what does more - there is no other way to change the settings of the BIOS within Windows.

  I looked in the manual - I find no mention after pressing F12 C or any other combination to change the boot sequence (of course I tried yet without result). The only thing I found possible is to press ESC + F1 for BIOS settings default _restore_. And turning the power on by pressing on the left of the space bar gives me the opportunity to Flash a new BIOS.

  Is this really so? Because that would mean I'm stuck. And in this case I will just save the money for the new hard drive and throw my laptop... (and probably by another brand next time - but I sincerely hope that is not so much...)

  Thanks in advance.

  Best regards
  Thomas

  Nice. ;)
  To my knowledge, it was always possible to boot from the CD. Also, after replacing the HARD drive

• Satellite P100-437: change the system from Vista to XP

  I am currently running vista on my laptop. I want to change the system for windows xp and I can't find the drivers.

  Pls help

  Hello

  Satellite P100-437 is a part of the PSPAGE series
  If you want to download the drivers, you must choose this serial number.
  I found the XP drivers for this laptop on the page of Toshiba Europe

  Check it again Buddy :)!

• Satellite C660-1J2 - change the color of the display

  Hello

  hope someone can help me it's new computer, a splash screen came to say that the color of the screen is set to high, and which uses the power of the processor, or you can configure it to fall or not to see this screen and you can change the effects.

  Have been, or how I can get this back to change the setting?

  If all goes well, might be kind enough to put me in the right sector

  Thanks in advance

  Tony Miller

  Hi milleras,

  Sorry, but that just confused s really tell you the color of the screen and not the brightness of the screen? You can post a screenshot of this message?
  What operating system you have?

  The brightness of the screen, you can change with the key FN + F6 and FN + F7 combination, but it has nothing to do with the color of the display.

• Satellite P855: cannot change the brightness of the screen under Linux

  Hello, guys... and girls :)...

  I bought my PC Toshiba laptop fourth - P855, there windows 7 pre-installed, but I'm a fan of Linux, so I installed Kubuntu 12.04 on it and have the dual boot menu at startup...

  And I have a very annoying problem - I can not change the brightness of the screen somehow, so keep it up... for the brightness function keys do not work, and the slider for brightness change anything...
  It works on windows, so I guess that's not the hardware problem...

  So, can you help me? ... I tried many things, tried different distributions also, but on none of them, I am able to change the brightness. And also - I tried the same distribution on the different laptops, and it works great, even from Live CD, no installation...

  I was able to change the brightness on previous phones I had... so why is this one so well done for Windows? ...

  > It works on windows, so I guess that's not the hardware problem.

  It's okay is not hardware problem, it looks like a bug in the Linux kernel or driver problem.

  Given that Linux is not officially supported on Toshiba laptops, I would recommend checking the support forum for the Linux distribution you use check also system Linux bugs for a possible solution on some linux support pages.

• Satellite 1000-S158 changed the BIOS password on an empty

  I changed the BIOS password on an empty (blank). I can't access the BIOS. Pressing on enter: it shows the error isn't the right password.
  How can I fix?

  Hmm. sounds you did something wrong maybe you misspelled or set a different password?

  Anyway, the point is that you are not able to bypass the BIOS password screen and in this case you will be unable to start Notepad.

  The problem is that you cannot remove the BIOS password, this can be done by a technician of ASP.

  In my opinion only technician in ASP can help you.

• Satellite 1900-303: changed the BIOS settings, and now I can't boot from the CD drive

  Can anyone help, I inadvertently changed the BIOS settings, and now I can't get the CD player to boot the pc back to the default settings, Windows xp seems to work ok as is the cd player.
  If someone has the original settings, I would be grateful for any help.

  Derek has soon

  Hello Derek

  Use the F2 key to enter the BIOS settings and change the order of boot devices. This option is under the STARTUP tab. Otherwise, you can insert the recovery CD when the unit is turned OFF. Turn it on and immediately press the C button. keep it down for a few seconds and unit is forced from the CD/DVD drive.

• Satellite L450D - cannot change the brightness of the screen more

  I was wondering if someone could help me. All of a sudden, I noticed that I can't change the brightness on my laptop what so ever. I don't know how long it has been like that but its pretty boring.

  I am currently running Windows 7 Home premium on the laptop just for information. I tried to change in power management and try to change the management of the real power, and pressing fn + f6/f7

  Any help would be appreciated with gratitude

  Brandon

  Hi telford_boi,

  Can you notice other work of Fn keys or just the screen brightness doesn't work more?

  In your case I would try reinstalling the package of value added. It controls the FN keys you want to say and all these special functions. You can download it here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Before installing the latest version, delete the old first, please.

• Satellite L - cannot change the size of the video

  I can't change the size of my video. It is not more fill the entire screen and my games is also "cut".

  I tried to adapt media player, messed with all the different settings, nothing. I like to watch my movies and play my screen full of games. I can't understand it and it drives me crazy. I have no idea what happened, was to play full screen for a while and then suddenly - who, not more :(

  Hello

  You have linked to play with the display settings?

• Satellite Z830 - remove/change the individual keys on keyboard

  Hello

  some keys on my keyboard Z830 keyboard becomes sticky over time.

  Is it possible to remove the individual keys, try to clean and put the key in, or if the key is stuck?

  I wouldn't replace the entire keyboard, as most of the keys still works very well.

  Thank you

  Hello

  > Is it possible to remove the individual keys, try to clean up and return the key, or if the key is stuck?
  The main caps are removable. But I'm not quite sure if caps cleaning would solve the thorny issue of key m.

  On Youtube, you can find some interesting videos, how to remove these key plugs and clean the area under the caps.
  https://www.YouTube.com/watch?v=rSI0DPagnEQ

  But watch it.