Satellite M60-164 - BSOD during the windows loading screen

On startup, I get the blue screen of death during the windows loading screen.

I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

I think I know why you get a BSOD.
You said that you have installed the Win XP SP1a.

You must Win XP SP2!

If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

By the way; The Toshiba recovery disc can be ordered from the ASP

Tags: Toshiba

Similar Questions

  • Satellite A100-049 stops loading at the Windows loading screen

    Unless I opened fully open/almost completely the cover on my Toshiba Satellite A100-049 it will always freeze on screen Toshiba Logo black (first one you see). She has completed half of the blue progress bar that runs along the bottom of the screen. I need and then turn off the button and once again, it becomes work.

    The laptop is only 2 weeks old nine. It's especially annoying since it prevents a scheduled backup to wake the portable computer from Hibernation. I have to leave it on or leave the lid open permanently.

    Help?

    It seems that the title has been changed from the one I posted, nothing wrong with that, but it is no longer accurate. It keeps loading the Windows loading screen, it freezes "before" that date. The Toshiba Logo POST screen, very first, you see when you turn on the laptop.

  • Satellite L500-164 - BSOD during XP installation

    Hello.

    I installed Windows 7 Professional 64 bit and everything was working fine... no probs. But now I want to install Windows XP (32-bit standard edition) on another partition, but it does not work?

    He gets in the installation CD, it loads the hardware drivers (the first step), but then, when he must step in partitioning menu or "where you want to install xp" - menu, it gives me a blue screen with information: (it's in German, I try to translate it):

    It has encountered a problem. Windows has shut down to prevent damage to your computer. If you get the error message for the first time, you must restart the computer. If this screen appears again, follow these steps:

    Search your computer for viruses. Cancel the registration of any newly installed hard drives or hard drive controllers. Make sure that the disk is properly configured. Run CHKDSK / F, to determine if the disk is damaged.

    Technical information: * STOP: 0x0000007B (0xFA36063C, 0xC0000034, 0x00000000, 0x00000000)

    I tried a lot of things. I formatted all partitions with a live cd of linux, so now the hard drive is completely empty, however, does not work. I guess that windows 7 (64-bit) caused the problem... but WHAT?

    Can someone help me please? I'm going crazy here... I just want to install xp, nothing more... :/

    Info: My laptop is a satellite L500-164

    Which WXP both of you are trying to install (SP?)?
    You have to load the SATA driver on startup?

  • My computer hangs at the Windows loading screen OR blue screen comes up saying I need to install the hardware.

    Hi, I recently got a computer and I just realized that whenever I turn it on after a long period of time (eteindre turn off during the night, turn it on morning) my computer freezes at windows startup screen. Sometimes a blue error screen appears and after reading it, I would say that a material is not installed correctly. After graduating with my computer, I am sure that I have installed the latest updates, but im not sure what is causing this problem.

    Would be very happy to help!

    Thanks a bunch! : D

    Follow these steps to try to solve your problems of boot.

     

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

     

    If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

    Download the ISO on the link provided and make a record of repair time it starts.

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

    When you have changed that, insert the Bootable disk you did in the drive and reboot.

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    Link above shows what the process looks like and a manual, it load the repair options.

    NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

    Read all the info on the website on how to create and use:

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

    It's a very good Vista startup repair disk.

    You can do a system restart tool, system, etc it restore.

    It is NOT a disc of resettlement.

    And the 32-bit is what normally comes on a computer, unless 64-bit.

    See you soon.

    Mick Murphy - Microsoft partner

  • U410 won't start - stuck in the Windows loading screen?

    Hi, I have a U410 that no longer starts. Don't know what he did stop. At startup, it loads the startup Lenovo screen, then the loading screen Windows 10 forever (balls chasing each other in a circle). I can't get combinations of keys F bring me to the BIOS. I tried to use the Novo, but not the work of options other than the restoration of the system. They all display the startup Lenovo screen, then the Windows 10 loading screen.

    I created a bootable USB floppy and USB boot, but I never have an option to get the BIOS or choose another Boot device.

    Thanks for the answer, it turns out that it was the hard drive.

    There's something corrupt on it and it wouldn't start. I took and connected to another machine, but he was not recognized by the BIOS or Windows. I returned to the U410 and starts in with the Novo button restore mode. Curiously, it worked and I was able to restore the machine back to original settings and then upgrade to Windwos 10. I lost all data on the HARD drive, but it's normal. She has been saved and most of the records is anyway in the cloud.

    Not trusing stability of this HARD drive, I decided to replace it with a Samsung SSD. It was a great experince. Samsung provides a disk copy utility that works on the HARD drive running! A took about 45 minutes to reflect the existing for the connected SSD HDD. After that, I have swapped drives, ran the optimization of SSD and it was good to go.

    The special tools required for this were opening and pry tools and an USB HARD drive adapter. There are many videos on YouTube that show how to open the laptop.

  • computer does not load before the windows loading screen.

    Hi basically I was watching a movie on my windows XP computer and it is essentially closed without warning.
    I tried to restart, but it wouldn't restart after loading with the blue bar screen.

    I tried to load in safe mode and it wont. I tried all the safe mode options you.
    I tried the last good config network still does not start.

    I also tried debug mode
    its not working do not and I really need all my things that are on the computer.
    I don't have a windows disc I bought this second hand about a year ago so any help would be thank you very much.
    Thanks in advance
    also, if anyone knows a way to fix this without an email from disk or reformatting windows me plz

    Jellybabyboosh,
    You should check with the manufacturer of PC for the recovery disc's different installation options.  You may be able to proceed to a repair facility and not lose anything. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • The computer restarts constantly to the windows loading screen. drive unmountable boot problem

    Think the question says it all... I tried the mode without failure of all modes, secure with networking, secure with command, last known, start windows normally, all do the same thing.

    Help? I don't have a Windows disc :(

    Read and implement the response in this thread:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/unmountable-boot-volume-stop-0x0000000ed/570c7f90-5869-E011-8dfc-68b599b31bf5

  • Satellite P100 - 429 A3 off when windows loads

    Heya. It is a serious problem that made my laptop unusable. I was wondering if anyone knows what it is.

    I was in a source game when it happened for the first time, I jumped into the game and the laptop just cut off. No classes stop, he just turned directly to the exit as if someone had held the power button. I looked at him with her for a minute and then turned it back. Everything seems to be going very well, I thought it was just an odd hiccup, but then, after completing the windows loading screen, it does exactly the same thing. Now every time I start, it get past the loading screen and sometimes it get on to the welcome message, was until the cursor is even loaded, it will turn off in the same engineering.

    The only things I've recently changed it is the BIOS (which is my obvious suspicion). I was watching just the page drivers from the Toshiba site and I found a BIOS update for my Notbook cliaming that it has been improved. So I downloaded and installed, once the facility had done his work to restart the laptop, but on all first run Windows bluescreened before he had even loaded. Then, after that, it worked very well so far.

    I also tried to use a Windows disk to perform a recovery of windows. However, the recovery console has done the same thing. In a few seconds initialization, the computer just cut off.

    If anyone has an idea of what is is, please let me know.

    Sorry for the typos, I'm not on a familiar keyboard.

    Thanks again.

    Wolfy

    > I jumped into the game and the laptop just cut off. No classes stop, he just turned directly to the exit as if someone had held the power button.

    Well, this looks like an overheating problem. Fact is that all internal devices run with a full performance during the game. This leads to a temperature inside the laptop. If your fans are not free because of the dust and debris then the laptop will be shouting down to prevent material damage.
    In this case the fan cleaning is necessary and desirable.
    I had a similar problem on my laptop and solved using a jet of compressed air!

    To my knowledge the P100-429 Sat belongs to the series of PSPA3.
    You should really be 100% sure that you are using the good BIOS.

    However, it is also possible that the laptops hardware is malfunctioning.
    In this case, the verification of the material is necessary. This test can be done by a service provider authorized in your country.

    Good luck

  • Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

    I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
    can someone help me find a readers who works on Windows 7?

    PLEASE

    Hello

    I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

    You see the ODD in Device Manager?
    If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

  • Satellite M60-164: very large external 320 GB HARD drive data Transmision

    I am the proud owner of a Toshiba Satellite M60 164, however, as I am downloading my wife camcorder videos and burn them to DVD, I rapibly to run out of hard drive space. Therefore, Saturday I purchsed a new Toshiba 320 GB USB external hard drive.

    After you have copied a number of videos captured on this new disc (about 20 min each for approximately 22Gb), I'm trying now copy back - one at a time - on the hard disc internal PC to burn them on DVD.

    Each of the 22 GB files takes up to 200 minutes (more than 3 hours!) to transfer back from the external hard drive to PC Hd - this seems incredibly long (I'm not impressed) - anyone any idea why this might be?

    Link is USB2. 1 GB of Ram on PC, 75 GB of disk space on PC internal Hd, 1.83 MHz piece, Norton Security running, if nothing else when attempting to transfer. Manual is useless, all this suggests is maybe 1 GB per dry 18 (at best) - a little difference between 396 seconds and 200 minutes (I have of course the NET would be faster!)

    The clues what is the problem?

    Pete

    Hello

    I guess that the Norton Security checks the files during the file transfer.
    Try turning off the Antivirus and Norton Security application if you want to copy the files.
    Check it out.
    The other possibility is that the drive HARD internal (5200 RPM) can't handle faster transmission of files.

  • SATELLITE M60-164: high slope whining

    I recently bought a TOSHIBA SATELLITE M60-164 and have noticed a subtle but incredibly annoying high sharp wail after startup. It is only in a very quiet environment.
    Suggestions that what this could be, I'm very tempted to return this laptop otherwise fantastic if the problem persists.

    Hello

    Can you please tell me if it works if the unit is connected to the supply current or battery?

    Have you noticed that on the first day of use? One of my friends has the same unit and no similar problem.

  • Satellite M60 - 164 need AC adapter / CC

    I have a Satellite M60-164. I tried to buy a replacement adapter. I sent the part number to my provider and they tell me that it is discontinued. Anyone know an equivalent compatible adapter for Satellite M60-164... Thanks in advance for your help.

    Hi Tony,.

    I found this site on Google UK, and they list a 19V adapter suitable for the beach of the M60.

    http://www.laptopbits.co.UK/database_files/Toshiba_Laptop_AC_Adapters.htm

    Kind regards

  • Satellite M60-164 has a Bluetooth?

    Fact the Satellite M60-164 were mounted hardware factory BT? The model No. East PSM60E - 02200 YEN.
    Thank you

    Hello

    Satellite M60-164 has no BT module on board. Each unit with BT has a stick of BT in the lower corner.

  • Satellite M60 - 164 get bluetooth to work

    I want to know if my pc has bluetooth on it, it seems she is in the device maneger but I can't make it work so I'm wandering if he is actuly on the phone it has a section in the control panel can anyone help please

    Hi mucklin terry

    I checked the Satellite M60-164 information and it seems that the Bluetooth is not available on this device.
    In this case, the only way to use Bluetooth technology is to use the PCMCIA Bluetooth card or the USB Bluetooth key.

  • Satellite Pro A110 crashes during the transfer of the large data in LAN

    Hello

    My Satellite Pro A110 crashes during the transfer of the large data in LAN. The network driver is a Realtek RTL8139/810 x Family Fast Ethernet NIC I've been looking through this forum and found some wire whit exactly the same problem, saying that the solution is to update Realtek lan set up in BIOS, not the computer BIOS, but I can't find any link to download the necessary upgrade file. Can anyone tell me please where to find this upgrade file or send it to me directly?

    Thanks in advance

    Is - this transfer of data in the company where you work? Do you want to download data from the server, or how to understand this? How to understand what you mean under big data?

    Have you tried downloading data on the Internet? For example, if you try to download some trailer HD (more than 200 MB)?

Maybe you are looking for

  • can I convert the option to choose in applescript in Automatic Configuration of the action folder

    Hello H I have an applescript script that is a sort of an image file and fix it to the sage according to uniqueness of the folder names. In this script I choose the folder option, but I want to convert the option into action automatically as a file c

  • Satellite A500D-10F - Display driver for Vista 64 bit

    Hi guys. I currently have a Satellite A500D-10F (PSAN3E-00900JN5). I was browsing through the download page, looking for the display driver for this model works on Vista 64. Unfortunately, only vista 32 and versions of windows 7 are only popping up o

  • Levenberg

    I can't get the LM routine connection to work.  Attached is a simple program that fails with the message Error-20003 occurred at NI_Gmath.lvlib:LM get new coefficients.vi:1380001 Possible reasons:Analysis: The number of samples must be > 0. The examp

  • Photosmart C4280: Incompatible device

    Hello. My Photosmart C4280 was previously works very well with Windows 10.  A new update has been installed a couple of days.   Now it is said that the Photosmart is an "Incompatible device" and will not open it.   I tried to reinstall the program th

  • TestStand, CVI adapter problem

    I have Setup to configure the adapter of the CVI in TestStand to launch an external DLL for debugging within the CVI. Now that I'm done, I can't cancel the adapter setting configure this option is gray out on the TestStand menu bar. Does anyone know