Satellite M60-184: name of the drive from DVD-RAM CD d: D: change

Hello
I have a Satellite M60-184, I have problems with the DVD player, sometimes changing the icon, there name of DVD-RAM to CD drive D: drive, then it is not able to read any cd or dvd, until I have restart windows. Someone told me that I had to update the BIOS, but it didn't work.
can someone help me?
Thank you very much

Francisco

Hello

The name, I guess the route because of the media that has been placed in change.
If the DVD is inserted so that the player goes to DVD D: and the CD has been inserted so the disc change CD d:
If the player doesn't work properly, so try to remove it from the Device Manager.
After again starting the operating system should recognize the drive again. Maybe it helps.

Tags: Toshiba

Similar Questions

  • Satellite M60-176: cannot install the graphics driver

    Greetings,
    I'm trying to reinstall the original driver from Toshiba site
    on a satellite M60-176 disabled ATI X 700 256 MB dedicated

    version is:
    Driver VGA (ATI M24C/M26P)
    V8.121.050322a - 021880C
    Driver VGA (ATI M24C/M26P)

    The error message occurs when I install the software: Setup copy dll, install some components and stop at the installation of the driver slide with message (translation from the french) "Setup was unable to complete the installation, try to configure your graphics card with vga standard it before running the Setup program.

    When I try to detect the card with control panel and chose the file CX_21880.inf in 2KXP_INF, the process copy the dll, but in the end complains that "a problem in installing Radeon X 700' and then the error is"ACCESS DENIED"

    I tried to follow the sequence as:
    uninstall all remove them, go in safe mode, video card (I can't put a good VGA card)

    I ' v tried a driver (Driver Cleaner pro) removal tool then restart XP and then try to reinstall the driver of toshiba original ATI: same problem

    TOSHIBA support put me to BIOS 1.60 level: same problem

    I cannot conclude that this original toshiba video driver cannot be installed on a toshiba...

    Actually I'm under standard with vga display 1152 x 864 32 bit colors with slow rendering

    I'm really ask for help, because I do not know how...
    Kind regards
    Ludovic

    Hello

    What happens if you install the operating system from the Toshiba Recovery CD?
    This CD also contains the ATI graphics driver.
    How about installation of the graphics driver on the site omegadrivers.net?

    But I must say that it is very strange question. The driver from the Toshiba site should work.

  • Satellite L510 - how to install the driver for wireless network card?

    Hello

    I recently bought Toshiba Satellite L510 laptop and problem in the installation of the wireless driver. I downloaded the driver from Toshiba sites.
    And installation get competed with success but it always ask for divers 'Network controller' and 'Askey for Toshiba.
    I'm trying different drivers of these last two days, but without success.

    Can someone Guild me please how to configure computer L510 laptop wireless. Also where can I get the drivers mentioned above.

    Thanks in advance.

    Hi mate,

    I m asking you to install the WLAN driver on your laptop computer purchased recently. Normally all the stuff is already preinstalled the operating system with all the drivers and tools. He s ready to use.

    However, what you mean exactly with her always ask for divers to Askey Toshiba network controller?

    Your wireless network card is listed in the Manager device correctly or yellow exclamation? What WLAN card you have?

  • My DVD Maker 2 will not install the driver from the disk

    I recently bought a DVD Maker 2, but cannot load it the driver from the disk... Please notify that I searched for hours on the Internet for the free down load for my legacy but no luck, please advise...

    Hi L.A. Hastie,.

    ·         What version of the operating system is installed on the computer?

    I suggest to contact the manufacturer or check with the place where you bought the DVD maker for more information and help.

  • Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

    Separated from this thread.

    Is there a way to copy the drivers and setup of the drive from the computer and transfer them to the reader of the dead computer?

    Hello

    You cannot copy the drivers installed anyway.

    Saving your files:

    You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

    See you soon.

  • How can I change the name of the file from the homepage?

    How can I change the name of the file from the homepage?

    CATIA de GR

    Hi CATIA

    You cannot change the 'filename' from the homepage of Muse. It is set to default "Index.html". You can change the name of the file from all other pages well.

    Kind regards

    Aish

  • Name of the table from DBA_EXTENTS

    Hi Experts,

    Can you please help me how to find the name of table to dba_extents.

    To be very clear on this point, if any block has been corrupted and we want to know what is the table or any other object resides on that block for that we move the object.

    I saw that in metalink long back about the name of the table from the block id dba_extents now am unable to get it again.

    I know that you guys will be experienced on that. So I need you guys help on that.

    Kind regards
    Siraj.

    A data file contains several extensions. A measure is made up of several blocks. It would be silly to Oracle to keep a register in dba_extents/dba_free_space for each block. A line from dba_extents/dba_free_space represents a group of blocks from BLOCK_ID and extending to BLOCK_ID + BLOCKS-1. (The line also follows the number of blocks (column) to the extent because you can have different sizes in a tablespace extensions - for example if the allocation is MANUAL or AUTOALLOCATE).

    That's why, for example,
    If a data file of 1000 blocks consists of two degrees and a free space (representing, say, a table that has been created but has been abandoned) it could be
    file 25: measure 1: used for table A: from block 64, or 8 blocks (8 KB): FILE_ID = 25, BLOCK_ID = 64 BLOCKS = 8
    file 25: measure 2: OPEN SPACE: from block 72, 896 blocks (8 KB each):-would be seen in DBA_FREE_SPACE, not in DBA_EXTENTS.
    file 25: measure 3: used for table B: from 968 to 32 blocks block (8 KB each): FILE_ID = 25, BLOCK_ID = 968, BLOCKS = 32

    So, say, block number 102 in this data file (25) is actually in the OPEN SPACE and will not appear in a query DBA_EXTENTS
    However, say, block 980 is corrupt. It seems able to 3 when you query for 980 between 968 and 968 + 32 - 1

    Hemant K Collette
    http://hemantoracledba.blogspot.com

  • Need driver CD/DVD RAM for Satellite L20 - 206

    Could someone please tell me where I can get a download of the driver for the carpet * a DVD RAM UJ - 841S?

    Hello

    just a quick question: why do you need drivers for a player that is automatically recognized by windows and doesn´t need to separate all drivers?

    If your reader is not working properly, then there may be another reason for. Have you encountered problems, which then you lead to the conclusion to the research
    for some drivers?

    welcome them

  • Equium L10 needs a driver for DVD - RAM drive

    It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

    I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

    Do not can someone help?

    Do you mean simply common driver for the carpet * a UJ830s?
    Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
    OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

    Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
    A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

  • Satellite A500 / 01 M - can not install the driver from nVidia page

    So I bought an A500 / 01 M over a month or two ago, and the NVIDIA drivers are not updated.

    I have the nvidia site to download new drivers, but they would not install.
    He said that the pilot was not compatible and I got get the update of my manafacturer.

    I went to the toshiba site, but I could not find my model there number... I searched and everything.
    So my current drivers are similar to 186. something and the last I think is 195.62

    How can I install on my laptop?

    Hello

    Toshiba display driver are distinguished by the drivers from nVidia or ATI and therefore the version numbers are different.
    Drivers Toshiba takes supported thermal protection that controls the dissipation of heat from the GPU chip.
    Don t support nVidia drivers this protection!

    If you can install the nVidia drivers, but only at your own risk!

    How to install it?
    Well, you have to do in the Device Manager.
    -Choose the graphics card in Device Manager
    -Update driver
    -now use the advanced option which would help you to select the driver that you downloaded from the nVidia page. You must point to the folder that contains the ini files. Ini files and DLLs are driver files.

    Welcome them

  • Satellite M60 - 164 need Win 7 driver for Player DVD Super Multi TS - 632B

    I have a portable satellite m60-164, I put windows 7 on it and windows does not recognize as a multi drive only a dvd - rw.
    can someone help me find a readers who works on Windows 7?

    PLEASE

    Hello

    I completely agree with Akuma. Windows 7 supports and include clean driver CD/DVD from Microsoft. If the optical CD/DVD drive should be automatically recognized by Win7.

    You see the ODD in Device Manager?
    If there is a yellow exclamation point, remove the ODD of Device Manager, and then restart the device after restarting again the laptop must find new device and should recognize this.

  • Satellite M60-167 cannot start the operating system

    The name of the model Satellite M60-167.

    Laptop turns off after a few minutes of work.
    Then I format C with Windows XP Pro, but it turns off as before.

    I did not finished the instalation and now I can't enter to finish.
    I had only blue screen same not the Toshiba screen on start.

    Can not enter the bios as well.

    Please help if you can and thanks for all!

    Post edited by: cota26

    Hello

    > Laptop computer just turn off after a few minutes of work.
    > Then I format C with Windows XP Pro, but it turns off as before.

    I think this sentence is the key description resembles your laptop could overheat and automatically stops.
    Why is this happening? Well, the laptop could overheat temperature high inside the laptop. It will stop automatically to prevent the equipment from damage.

    My long experience, a clogged cooling fans could be responsible for the bad cooling and the temperature high.

    So what to do?  :|
    In my opinion, he must clean the fans to get rid of dust and debris.

    The jet of compressed air is very useful tool and could help you to clean the fans.

    Hope this helps to get the laptop running.

  • Satellite M60-164 - BSOD during the windows loading screen

    On startup, I get the blue screen of death during the windows loading screen.

    I don't have a recovery cd, only a cd of OS (windows xp SP1a), which shows the option to repair but prompts then insert the recovery cd, how and where can I get one of these!

    No matter what help get a restore for Toshiba Satellite M60-164 Pro cd would be much appreciated!

    I think I know why you get a BSOD.
    You said that you have installed the Win XP SP1a.

    You must Win XP SP2!

    If you wish, you can create a CD Win XP SP2 clean! How? It's very easy. You need the tool freeware nLite (google for it and how to use it).

    Using the nLite application you could create a new XP CD and could include SP2 in this CD. You can then use this disk to start!

    By the way; The Toshiba recovery disc can be ordered from the ASP

  • Satellite A60 do not mount the drive UJDA760

    My Satellite A60 CD-ROM/DVD-ROM drive has stopped working properly. He is more able to read DVD - ROM, a serious problem because the recovery disc is a DVD-ROM.

    I recently bought a replacement drive, the same model as the old disk number. But when I installed it, the computer does not recognize the drive. The drive has power and running disks. The computer does not know it is there.

    Someone has an idea of what can be done to encourage the player from the computer? I updated the BIOS to the latest version, but that did not help.

    I appreciate any suggestions.
    Phil premium

    Hi Phil premium,

    The old drive is recognized correctly in the BIOS?

    I'm not sure but some readers have a rider on the back where the connector is. There you can switch between Master, Slave and Cable Select. Please put the jumper on Master and if it s does not, try the slave mode.

    In the worst cases, the new drive is defective and you must return it to the store and ask for a replacement.

  • Satellite M60: grey spots on the LCD screen

    It seems that I have a problem with my Satellite M60. I noticed a few more dark spots on the LCD screen. Looks like the screen is dirty (grey size spots about 5-6 pixels), but it seems to be not in the surface of the screen, but on the inside (the surface is perfectly clean) and, certainly, is not the problem of dead pixels or subpixels.

    Is it possible that there is little dust inside of screen? Is it possible to clean it somehow? Such a strange thing is covered by the standard warranty?

    Hi Fox

    Possible it s not a BIOS issue. Of course, I read the other case, but perhaps it s not the same question.

    But do not forget that you are using the good BIOS!
    A lot of users here uses a bad BIOS or bad BIOS procedure.
    In addition, the BIOS version performed from 14/09/06. That is why it s not very old updated.

Maybe you are looking for