Satellite M60: cannot install the latest driver for my graphics card

Can not install the latest driver for my graphics card
Satellite M60
GRAPHICS ATI MOBILITY RADEON X 700

Hello

First of all I'm really putting t understand why you start two topics with the same theme. It is often better to have a subject with good content and interesting comments. Am I wrong? ;)

Anyway, in your case, it is interesting that Toshiba use adapted drivers because of the material. This means that this graphics card is not required to run at the maximum level. Material cooling in laptops is very problematic and high temperature can cause overheating or a material damage. All hardware components are placed on a small square. Graphics card produces a lot of heat and it is not so good for other material.

When you use graphic driver non-Toshiba card is forced to run faster. That's any use of support laptop manufacturers don t of third party drivers. The fact is that physical protection is a priority.

I didn t do all the experiments, but according to some reports on this forum, there is how to install the driver of non-Toshiba graphics card.

Please check this forum and you can find a lot of comments about this. An interesting topic is http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=18063&messageID=66186

Tags: Toshiba

Similar Questions

  • Satellite A50-109: cannot install the latest driver for card ghraphic

    Hello

    When I want to install the new driver for graphic card on my satellite A50-109 and error will be displayed:
    THIS DRIVER CANNOT INSTALL ON THIS COMPUTER,
    Please help me
    my graphics card: Intel 82852/82855 GM/graphics controller GME

    Please help me

    Hi Milad,
    Did you get the new driver from the web site of Toshiba or others.

    The graphics card in your laptop is not necessarily compatible with the latest drivers from the manufacturer, simply because it is specially designed for your laptop. Usually only the drivers supplied by Toshiba works correctly.

    HTH

  • Satellite L550 - cannot install the display driver for Vista 64 bit

    Hello

    I have a problem with my L550. The display driver does not work after installing Vista Ultimate 64. What can I do? I launched the driverpakage from the Toshiba site. It has been extracted, but after this procedure,... nothing!

    There is only the standard VGA graphik installed in the configuration.

    Thank you!!

    Hello!

    Did you start the file setup.exe after extraction of the files?
    Go to the directory where the drivers were extracted and run the Setup file. Follow the instructions on the screen and after reboot, the drivers must be installed.

    Check it!

  • Impossible to install the latest driver for Intel 82852/82855 GM/GME (SP A40)

    I know that this topic is explained before by NickyNoogle and Juan28, however I need more help.
    I can't install the latest driver for the graphics controller Intel 82852/82855 GM/GME (Toshiba A40 Satellite Pro). I downloaded the driver from the Intel Web site, but it has not installed and there is an error message "unable to install on this computer, please contact with the producer. I need to update the driver of 6.13.10.3514 version of lates version (6.14.10.4421). I know that I have to use the Toshiba drivers only. Could you be so kind and stick it to the post any link of this driver to download? I can't seem to find it on the Toshiba site anywhere.

    Hello

    You can not install it because of the material. AFAIK designed Toshiba drivers are slightly modified to be limited and protect the graphics card. Driver Intel can get the map on the maximum limit and destroy it. This is the reason why you can not install it.

    Sorry but there is nothing to do. Try to check if a new Toshiba unit has the same graphics card and latest driver on Toshiba download page. Date of arrival:
    Sat Pro L10
    Satellite L10
    Satellite A50 and A80 (6.14.10.3943)

    Good bye

  • Satellite A300D-17Z - cannot install the display driver for Vista

    Hello

    There is a big problem with my A300D-17Z.

    The laptop has ATI HD3470 Hybrid Crossfire display system. I'm trying to install the driver in Vista Ultimate, but it does not work. The ATI Catalyst control cannot install and ATI driver file is empty. Shows Device Manager still there are two graphics card with «!» I tried so many ways. Install framework 3.5, pilot of the AMD 7 series, last version of the ATI driver, driver of the same other computer brand who says that worked.

    Please help me, I had been tormented for nearly 48 hours. PLEASE, I BEG YOU!

    Hello!

    Have you tried to install the driver to display on the Toshiba site? You can find it here:
    http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

    Before you try to install a new display driver, you must remove any old version in Add/Remove programs. Then, restart the laptop and use CCleaner to clean the system. Restart again and then install the new version.

    You have the same problem with the factory settings? In the worst case, you must reinstall Windows using Toshiba recovery disc.

    Good bye

  • Satellite A300D-15B PSAKCE - cannot install the audio driver for Win XP 64 bit

    Hi all

    This is my first post here after hidden during the last week or so, my hope is that somewhere it helps and hope so!

    I have a wonderful Toshiba A300D-15B PSAKCE with RAM 4 GB/O, but I suffer from some problems RESEARCH Holy function cannot resolve. I use this laptop as a box of development for uni/work unfortunately...

    After a complete nightmare and Vista32, Vista64, I decided to go back to windows XP32, however this custom install, continues to claim a failure of a CRC file after (and Yes, that's with SATA in IDE mode and a disc of XPSP2)

    I decided that I really DON'T want to goback to Vista, so installed Windows XP64. Now the first installation is very easy, I have the basic configuration, the chipset, graphic, network, CPU, usb, fine... except basic... and that's where I lost most of my hair... SOUND!

    First try to install the results of the pilot of his failure, claiming the mmdriver.inf cannot be found or corrupted, obviously I checked, and yes there it is, downloaded pleasure the MMDRIVER. INF and placed it system32 and the installation always fails.

    I also tried a "manual installation", in .inf files... which includes pilots XP32/64 and Vista 32/64 bit drivers, still the same
    problem, the driver continues to not install. I am going bald. Exceptional drivers who moved there

    * - Audio device on High Audio Defninition Bus *.
    * - Mass Storage Controller *.
    * - Modem Device on High Audio Defninition Bus *.
    * - USB device *.

    If what follows is any help, (Sandra 2008)

    * - Disk controller *.
    (AMD (ATI) SB700 SATA Controller [IDE Mode])

    * - Disk controller *.
    (Toshiba SB700 IDE)

    * - Audio device *.
    (Toshiba IXP High Definition Audio Controller)

    * - Audio Codec *.
    (Conexant Systems 5051 hours)

    * - Audio device *.
    (AMD (ATI) [Radeon HD 3600 Series] RV635 Audio device

    Now, as I write this, I heard the rumor that the A305D uses the same
    audio/graphics drivers... Well well... off to try something I guess...

    If there is no help or ideas, I'd appreciate it.

    Hello

    The laptop seems to use the Conexant audio chip. So, you will need the right sound driver for Win XP 64 bit.
    Unfortunately, the European driver Toshiba page provides the drivers for Win XP but I don't know if the pilots would cover the OS 64 bit as well m.

    Anyway, what you need to know, is that you will need to first install the patches Ms.
    The fix KB835221 and KB888111MS must be installed before installing the audio driver.
    If you have tried to install the driver, then remove it from the Device Manager and update Windows XP first!

    AFAIK that SP3 already contains these patches then perhaps you should install SP3 first before starting with the installation of the audio driver.

  • Satellite L300D - cannot find the XP driver for the graphics card

    Hello

    I just bought a Toshiba Satellite L300D and I installed Windows XP (instead of vista, which was preinstalled). I can't find the XP driver for the graphics card... Everest recognizes him as ATI RS690M. A download link will send me straight to heaven!

    Thank you in advance,

    Nikos

    PS. of course, I searched the display on the sites of several Toshiba driver and I got this message: "the resource you are looking for has been removed, had its name changed, or is temporarily unavailable."

    After that, I tried the driver from ATI, and it seems that they are more home driver for XP.

  • Satellite Pro 4600 - installing the Audio driver for Win98 SE

    Hi all

    I m new here.

    I have a Toshiba Satellite Pro 4600 abandoned and I put Win98 SE edition on it.

    The problem I have is I can download the audio driver, but when it comes for her, he asks me a yahama cd that installs, I think its 4 or 5 drivers from the cd. I currently do not have this cd so I was wondering how to get around this problem.

    Thank you for reading

    Tony

    Hello

    I found the Win 98SE driver sound for the Satellite Pro 4600 on the European driver Toshiba page.
    You have to look in the folder to ARCHIVE.

    http://EU.computers.Toshiba-Europe.com-> support download &-> download drivers

    He choose: * Archives-> Satellite Pro-> Satellite Pro 46xx-> Satellite Pro 4600-> Win 98SE *.

    In addition to information of Yamaha audio driver, you can find these details:
    + A wide range of audio controls are possible using this audio driver, including: Software Synthesizer, the microphone volume, 3D development and management Power +.

    So I think that this driver should help you!

  • Windows 7 cannot install the video driver for vaio

    I installed windows 7 RC on my computer laptop vaio VGN-TX770P. The standard VGA controller seems to work the laptop screen using the chip intel, but claims he can not find a driver for the connector external vga for monitor. I tried to install the vista drivers from the website of sony in vista compatibility mode, but it seems to ignore it. Any suggestions?

    OK - solved. Machines built around chipset 915GSM need to install the XP driver downloaded from intel in XP compatibility mode. That at least gets video acceleration and double screen works as well as XP.

  • Satellite A100 (PSAA9E) - Cannot install the display driver for Windows 7

    I have a problem with installing official Toshiba Windows 7 x 32 ATI x 1600 driver.

    After unpacking it should run install.exe, I think, but it's not; nothing happens. Go on the Setup.exe with installation manual, then I see no Catalyst Control Center & Display Driver from the list, just the catalyst install Manager & vcredist. After installing these components (CCC & DD) are not present.

    Any ideas?

    P.S. Same problem with the official driver of Toshiba Vista32 ATI x 1600.

    Hi mate,

    You have already installed other drivers for the laptop? I mean the chipset driver, this driver must be installed first.
    And are you sure that you have ATI display driver? Some Satellite A100 models were shipped with the nVidia graphics card, AFAIK.

    Moreover, what happens if you install driver manual in device via advanced installation manager?

  • Satellite A100-590 - cannot install the display driver for Win7

    I installed Win7 on my Satellite A100-590 (PSAA9E-03Z00QGR) today. Everything works fine except for the display drivers.
    I downloaded the drivers win7/32 bit here: [here | http://at.computers.toshiba-europe.com/innovation/jsp/SUPPORTSECTION/discontinuedProductPage.do?service=AT&BV_UseBVCook = Yes & PRODUCT_ID = 115970 ie] but when I try to install, extract the files and then nothing happens.

    Does anyone else have this problem or even better a solution? all other drivers will work on this laptop?

    Edit: the graphics card is an ATI Mobility Radeon X 1600

    Extract the files in a new folder created. Open it and use setup.exe.
    What happens when you start it manually using setup.exe?

    Alternatively, you can try to start the installation in the Bin folder.

  • Satellite C670D - cannot install the ATI driver on Win7 installed costs

    I have a C670D and cams with Win7 Home Prem
    I have Win7 Enterprise edition and installed.

    It looks good, but the dosn´t graphics work. I have try´d the pilot in the Support section, but they didn t work.
    The site of ATI theres no driver for it.

    Maybe I just need a driver of the APU, but I can't find anything.
    Maybe someone here can help.

    Hello

    What Satellite C670D-xxx you have exactly?
    Do you have an error during the installation of the driver?
    Have you installed a Win 7 Enterprise 32 bit OS?
    The European driver Toshiba page provides only a display driver ATI for Win 7 64 bit system.

    More information would be really appreciated!

  • Satellite L300 - cannot install the display driver and chipset

    I downloaded the site Web of Toshiba XP drivers.

    Now I'm getting errors when I try to install. Display drivers and Intel chipset gives me the error:
    "This application has failed to start because the application configuration is incorrect. Reinstalling the application may fix this problem.

    What can I do?

    Hello!

    Are you sure that you downloaded the correct drivers?
    For Satellite L300 are different numbers of models available to check if you have chosen the right way.

    You can also install the drivers manually. Go to Device Manager > right click on the graphics card (or other device) > Update driver

    Good bye

  • Color Laserjet M476dw MFP: page in the nonpaged area 'failure' BSOD when you install the latest driver for M476dw

    I just bought a Color Laserjet MFP M476dw for use on my wireless network.

    I downloaded the latest version of the suite of the HP driver: LJPro-MFP-M476-Full-Solution-13302

    for my Windows 8.1 operating system / 64 - bit and listed as version: 10.0.13302.320 - September 25, 2014

    I was connected with a local administrator for the installation level account

    I started installation, the printer was discovered and s/w install went fine until she gets to the point of print test page test page printed but that page was printing the computer locked with his (first) Disconnections:

    "failure of page in the nonpaged area".

    I turned off, restarted and after the connection got an error message that says:

    «The HP printer and Alerts State met and error and can not recover... Please restart...»

    Windows version: Win32NT 6.2.9200.0

    HP printer status and alerts version: 070.040.00169

    I rebooted again and got the same error...

    I started the uninstall program with the hope of just uninstall the printer status s/w and then put it back.

    but the uninstall program seems to have uninstalled the entire suite of s/w...

    Before going to this one more time, I thought that I would like to ask for suggestions...

    I've owned this phone for 6 months, and it was Cap... it's the first BSOD I did...

    Thanks for any help!

    I wanted to just close this thread:

    I was out of town for a week, but just returned and recalled to HP support.

    The technician did a large manual cleaning of the pilot has failed on my machine.

    and ran two different installers cleaning MSI Windows then with temporarily disabled antivirus s/w

    (which I had also done during initial Setup) we re-installed and everything seems to work.

  • Driver is not intended for this platform (install the latest driver for Verizon Wireless WAN (UNDP))

    Hello

    My Verizon Wireless WAN has worked on my T500 (2081CT 0, 4 GB of RAM, Windows Vista Business 64) since I received it last September. This morning it stopped working. Said that the card has not been activated. Ask Verizon and Lenovo have been pretty useless - each blamed the other, I so put on my own.

    -I uninstalled the driver for the Qualcomm HS USB card integrated, downloaded the latest version of the driver (transferred via CDROM since I can't connect to this laptop to the network where I work) and tried to install it. The HS-USB card is now displayed in the devices as "Unknown device" Manager (under 'other devices'), and his device status is:

    "The drivers for this device are not installed. (Code 28)

    Driver is not intended for this platform.

    To reinstall the drivers for this device, click on reinstall the driver. »

    Huh?

    Of course, reinstall driver does not work, the first problem is that he can't find online because I don't have internet connection without the card.  This driver has been installed from the following link:

    http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-69999

    Seems to me that it should work on this machine. What I am doing wrong?

    -Some additional background: I've had several accidents recently, including at least two yesterday with blue screens. Easy to believe something has become corrupted, that's why I tried to uninstall and reinstall the driver.

    Help!

    Thank you very much.

    Solution was to uninstall the 'unknown device', search for new hardware and follow the promts by selecting all default values.

Maybe you are looking for