Satellite M60 - screen does not light when I reboot

Similar Questions

• Arm, wrist and the screen does not light.

  I just wanted to give a few comments. When I walk, carry heavy bags and I want to watch the time I lift my arm to look at my Apple Watch and the screen does not light. Maybe its because the movement of the arm is subtle, since I am carrying heavy bags. I was wondering if that could be repaired since both times I tried it, annoyed me. Walk in a street busy NYC with my groceries, I would like to know something, briefly, on my watch as I walk with the duty to stop or to disembark the bags.

  Hello

  It is a community of support based on the user.

  To make sure that your comments and suggestion are presented to the attention of Apple, you can submit the following form (all comments are read by Apple):

  https://www.Apple.com/feedback/watch.html

• HP Envy 15 "touch screen power LED appears, but the fans does not and the screen does not light

  Hello!

  I'm a student in computer engineering at the University of Waterloo 1A, and I run a very serious problem with my HP Envy 15 "TouchSmart laptop computer running Windows 8.1. It is a problem that just started today, and I'd rather have a first support here before going to see the technical support Office sometimes tomorrow. It has to do with the screen and the fans where the Power LED lights in white, just as when the laptop works properly.

  (I have warranty on the laptop when it was purchased last June, except that if I find that I need to get a replacement, I'll lose all my work, I did on that since I started my semester.) It's so silly of me not to have all my work saved on a backup, because I have an external hard drive. Problem is, I've had too many problems in getting myself organized, I'm not being open-minded as I should, and worse, I'm not a balance between life and work at home.)

  Before I had my MATH 117 conference (Calculus 1 Engineering), I was in a nearby lab where my laptop was open and turned, works correctly. I've had NetBeans IDE running since I wanted to work on the second part of my current assignment of CS 137 (principles of programming). Because it was almost time for my presentation, I closed the laptop by simply moving the screen down on the keyboard, where it goes into mode 'sleep'. (Whenever I flip to the top of the screen, the laptop is supposed to return, and the sliding screen of Windows 8.1 connection will appear.)

  When I took my seat for reading, I wanted to spend a little time to work on my programming assignment. However, after the reversal of the screen to the top, instead of having the login screen appears, I encountered the problem: the power supply light is showing a white light, but I don't hear the fans between the ventilation openings on the left side of the laptop and the screen does not light. I tried to take the power for several seconds and once button at least 10 seconds, except that the power light continues to display on a white light. The Commission of the Wi - Fi light is not displayed.

  Whatever it is, I don't want to take out the battery because I have that on my last laptop, and it's from there that I couldn't turn to the former, a new market. If I leave the Envy laptop battery, it will short-circuit the connections between the battery and the computer, and so several components will FRY. For now, what I do let the laptop is to empty the load on the battery. Then, once I noticed that the power light does not project a white light, or plug in the AC adapter and try turning the laptop on the power button.

  It will take a little while for the circuit drain the load on my battery but...

  Anyway, please would you be kind enough to help me with this problem? I would really appreciate if you can give me several recommendations. Thank you!

  Hello @GregPDesWHP,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I read your post on how your laptop is not on, and I'd be happy to help you in this case!

  In order to restore the features of your computer once more, I recommend you follow the steps described in this document on the computer does not (Windows 8). If the problem persists after having exhausted all the steps in this document, I recommend you contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• I don't know but its all white: my tablet screen does not light, but the sounds and touch are ok. Please help me!

  I dropped it and now the screen does not light, but sounds like the notifications are on.

  Hi!, Sensei:

  Welcome to Forum!

  To help you, is necessary that you enter make, model (without serial number) and operating system.

• Why Satellite Pro A300 does not start when you press the power button?

  Suddenly my new Satellite Pro A300 does not start correctly when you press the power button. The situation is the following: when I press the power button is displayed the opening of Toshiba (Leading Innovation) and the disappers image quickly. Then there is a black screen for about 30 seconds. There is a rectangular frame with the text Microsoft Corporation under. And nothing happens however long wait.

  In order to get with the trial starting I then shut down the computer by pressing the power button until the computer turns off. ("The hard way to close")
  Now, I press the power button shortly to turn on the computer. Then, the computer starts normally with the photo to open Toshiba and after a few seconds, I wonder to open the computer in safe mode or in normal mode. I now choose to open in normal mode and the computer opens normally and is ready to work.

  What should I do to get a normal departure procedure?

  When the laptop starts normally (after choosing normal mode) stop your laptop properly using START > shut down option. Next launch should be normal.

  When the OS is moving towards the low irregularly will always ask you how to start this new (secure or normal mode).
  The same thing happen on my Satellite A300.

• Satellite A660 - Webcam does not work when using Skype

  I recently bought a Satellite A660-15J. I am running Windows 7 64 bit.

  I have the latest version of Skype (5.3.0.111).

  The integrated Webcam does not work when you run Skype. If I run the Toshiba Web Camera Application the webcam works fine. However, when I test it in Skype, I get a message saying "cannot start video. Try quitting other programs that use the webcam '.

  However, as far as I can tell there no other programs available. I have tried Skype with the Web Camera Application clised & open. I also confirmed that I do run the latest version of the program.

  One of the main reasons we have this laptop is to use Skype video... Help, please.

  Disable webcam application start-up and exit this application before you start Skype.

  I used Skype many different models of laptops, including friends A660 and it worked correctly.

  When you open Skype video settings is listed as default camera USB webcam?

• PowerShot SX50HS screen does not except when in the custom 1 and 2 settings

  screen does not except in the custom 1 & 2 settings.  I turn the dial to the next setting appears on the display but turns black as soon as it is fully in the new context.

  It come back when you press the display button?

  You can try to do a reset to the settings via the settings menu also

• mode full screen does not work when playing games, recently ive changed my os from vista to windows 7... Please help me

  Im having dell inspiron 1545 graphics Mobile Intel (r) express chipset family... I changed my os from vista to windows 7 32 bit... after the mode full screen does not work just playing games... a black bar is the view of both sides of the window... can help a whole... ???

  Hello

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2:

  Download the latest driver adapter disaplay from the manufacturer's website, install on your computer and check the status of the issue.

  Inspiron 1545

  http://www.Dell.com/support/drivers/us/en/19/product/Inspiron-1545

• Satellite M60-170 does not start - black screen

  I have toshiba M60-170, before it was perfect, but now I don't know what is happening?
  When I try to start my computer just for 2 sec, everything is good, then the fan of sounds of the CPU and the screen is black and the stop of HARD drive.
  So everything is stop!
  I try to start again but still does not.

  Some body told me that it is the motherboard!
  Please, someone tell me what is happens with my beautiful laptop?

  Thank you

  It does not sound good friend :(

  But let's try this; Remove the battery and unplug the power adapter for about 20 min.
  After this short period of time connect the two parts, and try to start Notepad.

  If it doesn t help the chances are that your hardware is defective. Like other guys said, it could be a fault of the motherboard or something different like CPU, memory modules.
  I can speculate on failure.

  I think that you don't have many choices. In your case, you should contact the ASP in your country for a control of the laptop.

  Good bye

• Screen does not light after the start, but after standby on Satellite M100

  Hello
  I have some experience with computers and laptops, but this problem exhausted all of my knowledge.
  My girlfriend has a Toshiba Satellite M100, PSMA1E. He currently works on Windows XP, SP3.
  The laptop has always had problems closing/stand bye. He would stand bye and the screen would not. She would usually be manually turn off (holding the power button) and restart.

  Same thing happened last week, but with me. I turned off the power button but when I turned it on the screen was completely black. After a few attempts, I realized that everything worked; I could hear the usual audio files and XP Boot, but there was no way I could get the job of the screen.

  The strangest thing is that the CMOS/BIOS, one with the Toshiba logo settings screen, also does not appear. If it's an OS problem, I thought that I would be able to access the BIOS at least, but it does not work. FN + F5 does not work.

  Then, strange yet something happened. I was turning it on and off with keyboard shortcuts and I realized that if I put on stand bye using shortcuts and then go back on the screen turns on perfectly well (there is a cause of adjustment resolution icons are irrelevant, but it works perfectly fine).

  From that on I tried everything I know. Update the BIOS, all Windows XP updates, all Toshiba QuickFix, cleaning the registry with different tools, uninstall and reinstall the video driver (ATI Radeon X 1400) utility, shortcuts keyboard, power saver, tools hardware Toshiba, looking to start up programs, services, everything I could possibly think off.

  What intrigues me is that the Toshiba start screen will not be displayed. I can't access the BIOS, but I tried to restore the standard values of the BIOS with Toshiba hardware tools. It did not work. I don't even know if reinstalling XP will work because whenever I turn it on it is all black and I have to make the stand bye / Tower on Tower.

  When I have it plugged into an external monitor, I could see all starting the process (initial screen of the BIOS and Windows). I then tried to access the video driver display configuration but it would show only the external monitor. It would only detect the laptop screen after a stand bye / turn back on, and then it worked perfectly: the screen two screens simultaneously, extended, everything. Ah, changing BIOS selection automatic the LCD + external monitor does not work.

  I am really puzzled here and I can't understand it. I really don't think it's a hardware problem, because the screen works 100% after the stand bye. I guess that XP is do something during the closing down that completely 'stops' my screen, even after starting, and then I can only turn it on with the thing stand bye.

  Any help would be really appreciated!

  Best,

  Hi guys

  I had a similar problem on a series of Satellite A200 and I could solve works to update the BIOS and update the graphics driver.
  In addition, you must make sure that all available MS fixes and patches have been installed.

  Unfortunately, but that's all I can suggest. If the problem persists and you would not be able to solve update components then an ASP needs to check.

  Good luck

• Touchpad on Satellite A200-1 body weight does not light when you tapoterez the top right

  Satellite A200-1 body weight.

  This has a double Synaptics touchpad mode that switches modes when you press on the upper right corner - at least he used to. Upgraded to Win7 and had to do a clean install as I had Vista Ultimate 32 bit version.
  Used the upgrade of Tosh package but the touchpad driver gave me the basic features, no double mode.

  Looked around and installed the driver of Luxpad V6.5 9.1.14 dated November 2, 2007. Played a little and everything came out to be almost normal, but the pad does not turn on & change the mode when I press on the upper right corner despite the checkbox for this being checked. It does turn on and work if I check the second option on the external mouse, etc..

  All ideas will be considered with gratitude that I tend not to use it. See you soon.

  Hi ple2011,

  Where did you downloaded Luxpad V6.5 driver? I can t find it on the Web from Toshiba site

  Is that on the Web from Toshiba site, you can download Alps Electric and Synaptics touchpad driver and you must install two drivers. You can download them here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• Re: Satellite A300-21I trying to start but the screen does not light upward

  I have a laptop Toshiba Satellite A300-21I 15.4-inch around the age of 2 months.
  He walks yesterday and received a message (very short)-initialization failed, see the event log.

  Laptop computer tries to start but the display does not illuminate.
  No prior problems.

  The indices of anyone?
  Stanley

  Hello

  You are able to access the BIOS?
  You see a Toshiba start screen that usually appears at the beginning?

  What happens if you press F8 at the beginning of the boot process?

  Please provide more details!

• MacBook pro screen does not light

  Hi, I have a macbook pro 13 inch edition at the beginning of 2015. A few days when I tried to turn on my computer, screen not turn on including the lamp to the rear logo. but I heard the startup sound with the keyboard backlight on. I plugged the computer to an external monitor, then I saw in this computer monitor works fine. I tried to make configurations LANDAU and SMC. screen still does not work. but sometimes laptop screen lights up, then when I restart the computer, the screen will come up again. help me guys what should I do? Thank you

  If you're lucky, the connection to the screen is not correctly connected or must be replaced.  If you are unlucky, the display needs to be replaced.  Make an appointment at an Apple store genius bar for a FREE evaluation.

  Ciao.

• Satellite M70 - screen does not work properly

  Hello world

  My screen on the laptop does not work correctly. He sometimes starts to white and becomes inadmissible. I followed the problem down, I think of what I can only describe as a fluorescent light ballast in the upper left of the screen (when looking from the front). If I use a clothes pin and apply steady pressure in the upper left corner, it is achievable. That is to say I can still use it.

  But barely.

  When disassemble the screen there is a kind of metal plate on the side of the screen and there is a part called electw f-1 94v-0 coming in contact with this piece of metal. My guess is that the two pieces have shorted or well have become loose such as tightening this part of the screen made it work again. There are discolorations burned on the piece of metal and the underlying aluminum backup that spans the entire screen. There is also a very slight discoloration burned on the play in question also.

  But as I said that the screen still works if I apply the necessary pressure in the upper left corner (currently with a clothes PIN).

  I have no money and cannot pay to have this problem so I have to come with an eraser he togetether solution myself or end without a laptop.

  What is this part? Part of 94v-0 f - 1 of the Electw? It is manufactured by Tyco Electronics, but in a search on their site I could not find it. And Googling shows up nothing important. There are two of these parties behind the screen on my Toshiba. The one on the right and one on the left.

  They are sodered to two sons, one black and one white that goes down to the area of FL Inverter.

  I know it's a long shot, but I wonder what that these pieces don't and if there is no hope for a temporary solution that will alleviate me of having to use a clothes pin in the upper left corner of the screen to get the screen to work. Perhaps by folding the parts to better contact with this or that. I tried to move a party earlier that helped a little but not much.

  It's got so bad that it sparkles now... a little constantly. Very annoying. But... still usable.

  Any input would be appreciated.

  Thank you.

  Carlos

  If the part is attached to the screen, then you will need to replace the LCD screen, or ask someone to fix it if possible.

  You can not buy the different parts of a strainer.

  If you are referring to the wiring harness/LCD screen, then you can buy a replacement at a cheap price. They are not expensive.

• Satellite A660 - screen does not work

  I have a Satellite A660 and when not hooked to an external monitor or TV, the laptop screen is white and you can't use it.
  The only way I can use the laptop and being able to see the screen is if I connect the laptop to the TV via a HDMI cable and use it like that.
  The laptop is less then 6 months and is rarely taken at our office in our office.

  I was wondering if anyone else has had this problem or knows what it can be.

  If this is not the case, how I had to do to someone qualified by toshiba for have a look that would be a problem of guarantee being under 6 months old.

  Thank you in advance for any help anyone can provide.

  > I was wondering if anyone else has had this problem or knows what it can be.

  Have you tried to use the FN + F5 to switch between the internal and external screen?
  Try this.

  If that does not help, then I would recommend contact the ASP in your country, because security must still be valid (as you posted it above).
  I think that the internal display is faulty, because the output of the video work, which means that this graphics card should be ok.