Satellite M70-169 Firewire Port

Similar Questions

• Fitness by using disk recovery on Satellite M70-169

  Hello

  I have a Satellite M70-169.

  According to me, I have messed around a bit with software such as cleaners of register etc. and want to make a new start.

  Exactly how, step by step, using the recovery disk came with the laptop?

  It will reinstall all that originally shipped with the laptop?

  Any help is greatly appreciated!

  Pesche

  Hello Pesche

  Instructions how to install Os using supplied recovery media, you can find under http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=2513&tstart=15

  I recommend to use the Expert installation mode and create a clean partition. When the computer starts for the first time you will be able to see the C partition only. The D partition must be created also in the OS, but is really not a problem.

  Exact explanation which you will find under:

  http://www.theeldergeek.com/hard_drives_07.htm - create an extended Partition (step
  http://www.theeldergeek.com/hard_drives_08.htm - create logical drives in an extended Partition. (Step 2)

  If you have any other questions, please write again.

  Bye and good luck!

• It is not recognized on Toshiba Satellite M70-169 Web site

  Hello
  I have a laptop TOSHIBA SATELLITE M70-169
  I wanted to update my drivers, so I logged on the TOSHIBA site.
  The problem is that my phone is not listed on the site, there are * M70-168 * and * M70-170 * but not * M70 - 169 *.
  I tried the recognition by serial number, result: DO NOT RECOGNISED

  I tested the autodetection, and here too, the result was: DO NOT RECOGNISED.
  I am surprised that my laptop is not recognized on the official website of TOSHIBA, while I had bought in a store.

  Can someone tell me if he had the same problem and give me directions to upgrade my laptop?

  Thank you

  Satellite M70 is old enough laptop model, and I can imagine that auto detection tool doesn't properly work. Your laptop is the model European and part PSM70E number (very important for research).
  In any case, you can find all the drivers or updates manually. Follow these steps:

  Visit the download page for Toshiba under http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=EU
  Click tracking options:
  Type of product - ARCHIVE
  Family - SATELLITE
  Series of products - M SERIES SATELLITES
  Model - SATELLITE M70 (PSM70)
  Short model No. - PSM70E
  OS - operating system

  And all of the available stuff appears there.

  If you have any other questions let us know.

• Satellite M70-169: screen freezes and meshes + mouse freezes

  Hello
  Hope you can help. So far, I'm impressed by my toshiba satellite m70-169.

  He has recently developed an intermittent fault: when the tilt of the screen the effect of light mesh on it and the screen freezes. The mouse also hangs at this point.

  If I tilt the screen one way or the other I can get it to work properly. A slighy inclination of the screen can cause the screen to freeze again. The problem is getting worse, however.

  The machine has never been dropped or struck, but was taken by one of the screen when it is open.

  I disassembled the strainer and push gently on various points and cables but nothing in this area suggests a loose connection or a weak point. So I believe the problem is in the essence. I tried to open this up but it fails because I didn't force anything.

  Question 1: any suggestions on the problem and possible solutions?
  Question 2: advice like how to open the main part, so I can check any loose cables, connectors or broken bones?
  Question 3: patterns for disassembly?

  Even once - I hope you can help - thanks in advance...

  John

  Hi John

  The above user is right. It s too risky to disassemble the laptop without having any experience with laptops.
  It is why I always recommend taking to a technician.

  But if you want, you can have a look here:
  http://www.irisvista.com/tech/laptops/ToshibaM55/laptop_LCD_screen_removal.htm

  It s a site on satellite M55 and withdrawal screen.
  But once again; You can do everything BUT only at your own risk! ;)

• Cannot re - install Power Saver on Satellite M70-169

  My laptop (Toshiba Satellite M70-169) will not properly charge my laptop battery. It will begin at the start of charging the battery, but then after awhile it stops when the battery is partially charged. I replaced the battery, but this has not solved the problem.

  To try to solve this problem, I tried to reinstall the BIOS, the Power Saver Driver then Power Save in that order.

  The first 2 steps seem to work; However after that I removed the power saving mode, I was unable to reinstall it from the version downloaded from the Web site. I extracted the installation in a folder on my c: drive, but when I tried to run setup.exe, nothing happened.

  Any ideas?

  Have you replaced new battery or the second battery is already being used?

  I have too many Satellite M70 and I think that this question is not related with software pre-installed. As much as I know Toshiba power Saver saver allows users to optimize the performance of the laptop or reduce energy consumption if the laptop is running on battery only. I put really think software preinstalled has something to with charger procedure and some influence on this.

  The fact is that each computer Toshiba laptop can work without Toshiba power saver utility on the same path using power options Windows XP Home/Vista edition. Because of this, I think that the battery must be replaced.

  What about the installation of standby power? According to the document of instructions for Installations you should install TOSHIBA Power Saver V1.36.0.1C only. try to delete the driver GST if you can find it under pre-installed software and install TOSHIBA Power Saver V1.36.0.1C only.

• Satellite M70 (PSM71E) Firewire / IEEE 1394 Device number

  I recently bought an Iomega eGo 250 GB Portable Hard Drive with USB 2.0 connections and Firewire 400.

  The Firewire port on the drive's type 6 pins. My Satellite M70 notebook computer has a Firewire 4 socket pins on the left side. I have an external power supply for the reader of the eGo. When I connect it to my laptop using a cable Firewire 4 pin 6 pin is not recognized. Nothing happens at all. I tried to disable the IEEE 1394 network adapter and reboot of Windows XP Home Edition with no luck. This drive connects and works very well using the USB cable, but I prefer using Firewire. The reader connects and works very well using the Firewire cable 6-pin 6-pin on my PC at home.

  Is there something I need to do to make the drive work using the Firewire port? I have no other Firewire devices to test the port with.

  Any help would be appreciated!

  Maybe the cable is defective? Is it the cable supplied with the HARD drive or did you buy it separately?

  You can buy more 6-pin to 4-pin adapter online. Google "firewire 6-pin to 4-pin adapter.

• Is Satellite M70-339 supports port external monitor?

  This model has a (d - Sub 15-pin) port for connecting an external monitor? -The data sheet on this site does not list one!

  Copy of it please respond to [email protected]

  Thank you

  Hello

  I put t found any information on the satellite M70-339, but on the M70-337.
  I think that the two units are not different and the ports are the same.

  However, as far as I know the M70-337 supports RGB (monitor) port on the left side, and you can connect the external monitor to this port.
  This device supports also a s-video port to connect the TV to the unit.

  Good bye

• How can I disable the BIOS on the Satellite M70-169 password

  I bought a satellite laptop series satellite-169 number.

  I registered the password using the Toshiba help utility that has been placed on the desktop, using the secure user function. After stop of the laptop and turned on, it prompted me to enter the password before it can start. When I entered the password which I thought I had entered windows using the Toshiba help utility under secure user, it gives me a message of invalid password whenever I try to enter the password. So I can't use my laptop.

  I have need of your advice and assistance.

  Bwalya keny Benny
  P.O Box R/W 50278
  Lusaka
  Zambia

  [Edited by: admin]

  Hi BKB

  I don't know which characters you used to create the BIOS password, but I hope that you do not use certain exotic signs. You can delete the existing password only if you use the right one.

  Another way to contact Toshiba partner in your country, and they will do it for you. Contact your local dealer and ask them for recommendation or check this page http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good bye

• Cannot burn DVD - R with my Satellite M70

  Hello
  I have a Toshiba Satellite M70-169 laptop which has the function
  DVD - R burning. However, when I insert a blank DVD - R, I have a
  message: drive inaccessible incorrect function.

  I think that just a fault of the computer notebook, or something else?
  Thank you.

  Hello

  Burning application you are using? Have you tried just preinstalled Sonic or same Nero?

  Generally avoid any problem. Please test with different applications, as well as with the different media (TDK, Verbatim, etc.).

• Satellite M70 - button of Intermittent gluing

  I have a Satellite M70-169 and the * button control * out of nowhere part starts to act as if it is pressed permanently, what happens at random and may persist even after you restart the laptop, it happens also during the HDD password screen * before starting windows * at all.

  Any ideas on how to solve this problem or what the problem would be welcome.

  Hello Christina

  It is not easy to say what the problem is here, but you can try to solve this problem if you do not use the buttons at all. I recommend you remove controls from Toshiba utility to add/remove programs. I hope this will help you.

  Please note that after that you do will not be able to use them by running OS. Please inquire about the results.

• What USB port output power offers Satellite M70-159

  Hello!

  I have a Satellite M70-159 and I am looking to buy a 2.5 external HARD drive ".
  I would like to know if the power supplied by the USB port of my laptop is 500mA or 1000mA because the disc external HARD I want to buy needs 1000mA to work.

  Eitherwise what I can do to provide external power to work HARD disk?

  Thank you

  Hello

  To my knowledge the notebooks USB ports provides the standard power of 500 my.
  Generally if an external USB HDD what needs more than 500mA so special, the power cable external power is supplied with version 2.5, HARD drive or HARD drive comes with a double USB cable.
  I hear double cable USB cable that supports 2 USB Sockets. In this case, you can connect the HARD drive to two USB ports.

  This picture date of arrival:
  [Double USB cable | http://www.n-c.fr/webshopncrevendeurs/catalog/images/Double_Cable_USB.jpg]
  Best regards

• Satellite A100 doesn't detect camcorder connected to the firewire port

  Recently, I upgraded my Satellite A100 for XP Pro SP3.
  In order to capture the video from my camcorder Canon I attached the camera to the 1394 port, but the computer does not detect my camera.

  I have changed the cable, restored the software factory default but the presist still problem.
  The camera works fine with another computer, which means that there is some setting or a hardware problem with 1394 port.

  Help, please.

  Hello

  Did you check device manager if the IEEE 1394 (firewire port States) bus host controller has been recognized correctly?
  Are there any yellow exclamation marks?

  Try this workaround:
  -in Device Manager, remove the IEEE 1394 bus host controller
  -restart the laptop
  -Wait that windows reinstalled this controller again
  -Connect the camera and turn it on.

  See you soon

• Satellite M100 - is a disabled firewire port saves battery power?

  Hey everybody

  I'm not so IEEE...
  If I disable firewire in Device Manager it will stop it and it will help save the battery?

  Hi Dmitrij

  I doubt that disabled firewire port will help to save the battery.
  If you want to save battery power, you should check the options and settings of Toshiba Power Saver.

  Check the HowTO document
  + How to configure my computer for optimal use of battery? +
  You can find it in the Forum s box HowTo.

  If you are using Vista, then I recommend that you check the Vista power settings.
  More details you will find in "HowTo" doc:
  + How to manage Windows Vista power management features? +

  See you soon

• FireWire port on satellite A210-1AS

  Hello

  A simple question, I hope.

  Could someone tell me if the Firewire Port is 4 or 6 pins... I can't find the info anywhere and I need to know what cable to connect my camcorder DV (4 pin), also... What is the meaning of the pines more (or less), would have thought they would be a standard connection, with a fixed amount of pine trees.

  You can tell that I'm not very technical.

  Thank you
  Lee

  All portable Toshiba have 4-pin firewire port.
  Otherwise, if you have the laptop in front of you, you can see which port is available.

• Screen broken on Satellite M70-337

  Hello

  After letting down my laptop, the screen broke, leaving me with 10% visibility.
  Can someone tell how to swith the RGB video using the keyboard so I can then display the image on a TV?
  Also, is there a way to put a blank dvd in the drive and a command to copy the contents of comps on it via the keyboard?
  The model is Satellite M70-337.

  Have tried to connect the rgb then start the machine and also by pressing FN + Ff5, no response, although it seems to work very well, out of the screen!

  Thank you very much.

  Hello

  If you want to connect your laptop to the TV I recommend to use the S-video cable. When connected using the FN + F5 combination and switch to the TV only. Also, be sure that the S-video port is correctly enabled on the TV.

  Sorry, but can you tell me what is the problem with the TouchPad? Why you want to use the keyboard only? There are just screen problem?