Satellite M70-309 and info on the recovery cd

Similar Questions

• Satellite M70-309: how to clean the LCD?

  Hello world!

  I have Satellite M70-309, so how do I clean finger LCD, dust, ecc... ?

  Thank you!

  Hello Rocco,

  Usually mine clean with a slightly damp cloth (wipe softly on the surface) and then just dry with a cloth. This command removes all the dust and finger marks.

  I also used a normal domestic surface cleaning spray (used sparingly) applied with a cloth and this removes any greasy fingerprints that can be on the screen.

  It is very important to not to use cleansers, abrasives or solvents as they may damage the surface of the LCD screen.

  Kind regards

• Satellite M70 320 and Vodafone Huawei E620 PC card

  Hello

  I have a Satellite M70 320 and a PC Card Huawei E620 Vodafone and when I introduce the PC card into the PC after a long period without work (1 day) shut down you the PC. After that I restart and it works fine. Any ideas?

  Hello

  This problem occurs with the PCMCIA cards? If not, then I guess that this problem is only due to this map and the best way is to ask the card for help making.
  I also read that the update of the firmware card might help.

  Also try disabling the processor s function of the Hyper-Threading technology in the screen of the laptop's BIOS configuration. All these tips are my suggestions and I m not 100% sure that if that can help. But you could try.

• Satellite M70-147 and Toshiba E-mouse (PX1215E-1NAC)

  Two weeks ago, I bought a Satellite M70-147 and a Toshiba E-mouse (PX1215E-1NAC). Two of them again.
  So far I've failed to do E - the mouse to do its job. I applied the installation instructions to the letter, but nothing helped.
  I discovered that they call it a compatible DID USB mouse, HID, which means Human Interface Device. His driver is mouhid.sys (Windows\system32\drivers), version 5.1.2600.0 and dates August 17, 2001. Not terribly up to date, I would say, but alas! I was not able to find an updated driver, not to Toshiba, not at Microsoft.
  Everyone knows a similar frustration? If so, it has resolved and if so, it would be so good in regard to tell me how?

  Kind regards.

  Hello

  Well, it is very difficult to say why this E-mouse doesn t work.
  Have you tried to use this mouse without the touchpad? Did you get any error messages?
  Check if this mouse works on another laptop or desktop PC.

  And as said Quad->'s Manual of the mouse

• I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEAS

  I DELETED MY PDF FILES AND AGAIN USING THE RECOVERY SOFTWARE I FIND ALL MY FILES BUT NOW WHEN I OPEN FILES THAT IT SHOWS (THE FILE MAY BE CORRUPTED OR NOT SUPPORTED FORMAT.NO HOW CAN I OPEN THE FILES.) ALL OF THEM ARE MY DOCUMENTS IS VERY IMPORTANT. PLEASE PROVIDE ME WITH A

  Deleted file recovery can recover incomplete files, i.e. the part of these files may be missing.  Recover deleted files is much more reliable if recovery of a backup, instead of using recovery software.

  These things depend on the operating system and the file system.

  One thing, you can see: open one of these files damaged with a text editor, and then make sure that the constant % PDF is somewhere in the first 1024 bytes.

  PS please do not post ALL uppercase; It is very difficult to read!

• How remove plastics cover Satellite M70-166 and replace the lock?

  I need to buy an another cover for my Satellite M70. However I don't know if I can manage to remove the old cover and put a new one.
  I have the opportunity to purchase a cover without a lock, so I need to change my old damaged cover one lock.
  It's easy to do it by myself (I mean change the cover up and change the lock)?
  Do I need some special tools to do?
  Thanks in advance to answer.
  Anna

  Hey Buddy,

  If I were you, I am looking for a technician because it s not so easy to exchange these parts around the LCD. The problem is that the stuff is very well suited and you don t know where all the screws might be.
  Just a suggestion: Don t do it on yourself, prefer to give someone who is familiar with laptops and has some experience with the dismantling of these mobile systems of the machine.
  But if you are really sure that do you it on your own, then just google for your machine, because there are several forums where users are showing the dismantling of their machine so that other users can easily do the same. But beware, if you have always guaranteed, then you will lose it at the opening of your machine.

  Welcome them

• Satellite A100 - messages of weird info during the recovery process

  This is the first time I tried to recover my Vista PC from Toshiba.

  During the recovery, I got this in CMD

  "C:\boot(something here) restore s Descriptor." seq. 26 - SACL rest. "
  "C:\SWStamp.txt s restoration Descriptor. SEQ 25 - list SACL will not go away.

  (1) is this normal?
  (2) what it means?
  (3) I even did a FULL format?

  Thanks a lot guys

  Hello

  During the recovery process, you will see some messages, that's nothing unusual
  Important is that the procedure does not stop but continues and after some time, the Win operating system should complete the installation
  Wait a bit and see if the procedure would end...

  If the procedure to hang himself, then start recovery and boot from the disc reocvery...

• Satellite A100 PSAA9A - drivers and applications from the recovery disk

  This laptop was reformated HARD drive and I decided to try Windows 7 (beta), which is currently installed and working well. I would like to install the original drivers and applications from the Toshiba recovery disc but I don't want to reinstal the operating system (XP). Is this possible?

  As far as I know that is not possible because applications from the recovery disk and drivers are for Windows XP and they are not compatible with Windows 7.
  In addition it of not possible to install the only special drivers or applications from the recovery disc.

  You can download all the drivers and tools on the site of Toshiba, but I doubt that it of compatible with Windows 7, but you can try it out and post your result here.
  http://EU.computers.Toshiba-Europe.com

• Satellite M70 - after HARD drive partitioned, the OS does not start

  Hello

  Good then this is a real doozy, and I hope that someone will help.

  I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

  Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

  I rebooted, and then after Windows restarted again completed.

  NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

  If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

  I'm really angry that this has happened and I just want to start over again.

  Can someone help me with this?
  I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

  Help, please.

  Thank you
  SG

  I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

  To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
  Check it!

• Satellite M70: Need to dutch version windows recovery CD

  I bought my satellite M70 (PIXMANIA) online store. Although the site was Dutch, the version of windows on my laptop has been French. Can someone make me a recovery with a Dutch version of windows CD?

  Thanks Geert.

  Hello

  The fact is that laptops are delivered with the Toshiba recovery CD and CD have the same language as the country where the phone was purchased.
  If you bought the laptop in France then the CD is in French, if you buy the laptop in the Netherlands, the CD is in Dutch.

  What you can do is to install the original Microsoft Windows, then install drivers Toshiba and tools.

• Re: Satellite Pro C660 - how to do the recovery with command prompt disc?

  I have a brand new Pro C660 of Satellite. It worked fine for a day, now it will not load windows. I don't have to create the recovery disks, as I only had a few hours (Yes, Yes, I know, should have been the first thing I did). All data are present (but backed up just in case USB) and I can see the folder HDDREcovery with all data intact. However, I can't run the application to create recovery discs. Does anyone know how to extract the images and create the media using only the command line? (I can go into command prompt by booting from the Windows 7 disc a friend). All options fail own laptop startup disks. It says 'Windows does not load' and I try startup repair, but it detects no error. Any help/thoughts on this will be greatly appreciated!

  Hey,.

  It of not possible to create the drive with command prompt recovery. You must use the Windows Toshiba Recovery Media Creator.

  Now it s too late for you, but you can order a disc here:
  https://backupmedia.Toshiba.EU/landing.aspx

• Re: My Satellite M70-165 is unknown in the Toshiba site

  I need support (drivers and instruction) for reinialize my laptop, but it is unclear in the toshiba Web site. Why is that?

  Toshiba PcDiag report:
  Data-2012/01/03 08:06

  [Information sul PC]
  Model Satellite M70
  Number parte PSM70E-01100JIT
  Number of series Z5265264K
  Version operating system Microsoft Windows XP Home Edition 5.1.2600 Service Pack 2
  Version BIOS V1.10
  Processor CPU Intel (r) Pentium (r) M 1.73GHz
  Memoria fisica 2048MB RAM
  Ability disco rigído 80,031,974,400 [bytes] 74.536 [GB]
  Ability spazio libero su disco rigido11, 920, 052, 224 [bytes] 11.101 [GB]
  Video Mobile Intel (r) 915GM/GMS, 910GML Express Chipset Family version is 6.14.10.4363
  Risoluzione screen 1280 x 800 pixels
  Color True Color (32 bit)
  Audio Realtek AC97 Audio version = 5.10.0.5870
  Rete Realtek RTL8139/810 x Family Fast Ethernet NIC version = 5.621.304.2005 address MAC = 00:0F:B0:A7:7E:DF
  Intel (r) PRO/Wireless 2200BG Network Connection = 9.0.2.25 address MAC version = 00:01:02:03:04:05
  Modem software Modem TOSHIBA version = 2.1.51.0
  Device IDE 1 MAST * A DVD-RAM UJ - 841 S version firmware = 1.50
  Device IDE 2 (nobody)
  Device IDE 3 HTS541080G9SA00
  Device IDE 4 (nobody)
  Device IDE 5 (nobody)
  Device ELBY CLONEDRIVE 1.4 6 IDE
  Internet Explorer 7.0.5730.11

  EC/KBC Version «»
  PS-MICOM Version «»

  > I need support (drivers and instruction) for reinialize my laptop, but it is unclear in the toshiba Web site. Why is that?
  It is not possible. Do you know why?
  You cannot search for laptop using the M70-165 model name. On the Toshiba download page, it is listed by model number. Your Satellite M70-165 a PSM70E part number so please use it for identification of laptop on the download page - http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp

  Older models are listed in the option ARCHIVE.

  Please check again.

• Satellite M70 354: how to change the display?

  Hello!
  My TFT-Display of my Satellite M70 354 is physically broken. So I need a new. The Servicepartner costs of a new view without working time are EUR 450,-(!). It's too.

  Is a change to myself as possible, or is it very difficult? On Ebay, I found a screen, compatible with an M70... What is important in changing the display?

  Maybe you can help me.
  Thank you!

  You should know that the display is one of the parties outside the laptop computer motherboard expensive.
  The costs are huge, as you can see. Of course the 450 bugs is too but it is a new LCD and additional, you will pay for the technician.

  That is why it s a good idea to look for second hand unit. The replacement of the screen is a little tricky. You must remove the plastic frame that attaches around the screen.
  The display is usually fixed with 6 screws and connected to the Board of Directors and FL inverter.

  I think that you should not replace yourself. I see that you have no much experience on these replacements. So the best idea is to buy a second hand laptop but then to ask a technician for replacement.

• Satellite M70-151 - how to upgrade the display driver?

  Hello

  as the topic says I ran out of options to update my graphics card Radeon X 700 on my laptop...

  I tried to see here: http://de.nodevice.com/driver/Mobility_Radeon_X700/get44199.html
  After installation, I learned that he had to go on the manufacturer's site to get my drivers

  So I ended up here: http://de.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=DE
  Still no idea who was the Radeon X 700 driver, I tried every update... Most did not anyway, and when I check my graphics card driver put in says that my current driver was 5 years old.

  Taking advantage of the distraction of the online games I noticed that went it a few seconds sometimes. Most people recommend that you update all my drivers, but it seems more difficult than I imagined

  So please, help me find the right link to update my graphics card! To help speed things up a bit, I added my DxDiag report.

  Thanks for your help

  / Edit: addition of the DxDiag total was not possible due to "inappropriate language"... O.o

  ---------------
  Display devices
  ---------------
  Card name: ATI MOBILITY RADEON X 700 graphics card
  Manufacturer: ATI Technologies Inc.
  Track type: ATI MOBILITY RADEON X 700 (0 x 5653)
  DAC type: DAC (400 MHz) internal
  The device key: Enum\PCI\VEN_1002 & DEV_5653 & SUBSYS_FF021179 & REV_00
  Display memory: 256,0 MB
  Current mode: 1280 x 800 (32 bit) (60 Hz)
  Monitor: (Standardmonitor)
  Monitor Max RES:
  Driver name: ati2dvag.dll
  Driver version: 6.14.0010.6587 (English)
  The DDI Version: 9 (or higher)
  Driver attributes: Final retail
  The pilot/size date: 2005-12-12 00:41:04, 252928 bytes
  Would be WHQL logo: Yes
  WHQL Date stamp: n/a
  VDD: Non applicable
  Mini VDD: ati2mtag.sys
  Mini VDD Date: 2005-12-12 00:40:44, 1414656 bytes
  The instrument identifier: {D7B71EE2-1513-11CF-726B-08DFA1C2CB35}
  Vendor ID: 0 x 1002
  Device ID: 0 x 5653
  SubSys ID: 0xFF021179
  Revision ID: 0x0000
  Revision ID: 0x0000
  Video Accel: ModeMPEG2_C ModeMPEG2_D
  Deinterlace caps: {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (YUY2, YUY2) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  {3C5323C1-6FB7-44F5-9081-056BF2EE449D}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {552C0DAD-CCBC-420B-83C8-74943CF9F1A6}: caps Frames(Prev/Fwd/Back) = (0,0,2) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {6E8329FF-B642-418B-BCF0-BCB6591E255F}: caps Frames(Prev/Fwd/Back) = (0,0,1) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_PixelAdaptive
  {335AA36E-7884-43A4-9C91-7F87FAF3E37E}: caps Frames(Prev/Fwd/Back) = (0,0,0) (In/Out) Format (NV12, 0x3231564e) = VideoProcess_YUV2RGB VideoProcess_StretchX VideoProcess_StretchY DeinterlaceTech_BOBVerticalStretch
  Registry: OK
  DDraw status: enabled
  D3D status: enabled
  AGP status: enabled
  DDraw Test result: does not work
  D3D7 Test result: does not work
  D3D8 Test result: does not work
  D3d9 Test result: does not work

  Post edited by: Sarahbella

  Hi Sarahbella,

  You can download the driver on the Toshiba site. Therefore, check the link you suggested and look for your model of laptop. As far as I know Satellite M70 151 belongs to the series of PSM71E, to look for with these elements:

  Laptop > Satellite > Satellite M Series > Satellite M70 (PSM71)

  Download the driver and run the setup.exe file.

  Check this box!

• Satellite M70-375: where to find the SD card reader driver?

  Where can I find the drivers for the SD card reader? It is not in the list of all the drivers of the M70 series.

  I checked the s information about this device and it seems that the Satellite M70-375 has a number PSM70E-xxx.
  First you must choose the category good pilot because there are two sets of Satellite M70.
  In addition there is no own available SD card driver. You must install the driver cardbus.
  This driver is also responsible for the use of the SD card.