Satellite M70 - 340 - the screen turns black after that charge BIOS

Similar Questions

• Satellite P200-RT3 - the screen turns black during the Vista installation

  Laptop worked very very slow for a while (everything worked very well - just very very slow), so I decided to restart costs after the support of all my data to the top and make the factory since HARD drive restore.

  The recovery is going very well and then after restarting Vista and is preparing to launch for the first time (prob trying to load the graphical interface of Windows), display dies - black towers with some artifacts along the top of the screen. Restart in Save Mode does nothing once it is in mode safe is it says that "Windows is unable to complete the installation in mode safe process - please restart." Restart normally translates into artifacts, like LKG configuration.

  Think something went wrong, I did the whole process again with the same result...

  Thinking the recovery partition is buggered, I grabbed a Vista Home Premium disk and installed from there... same result.

  Think display Vista drivers are buggered, I installed XP Home to rule out the possibility of a crystal display liquid buggered... XP installed fine.

  Try the recovery again... no luck.

  Hello

  Just FYI: you can create a recovery disc yourself. You know about it?
  You must only start the Toshiba recovery disc creator, which is preinstalled on your laptop. You can find it on start > programs > TOSHIBA.

  The Toshiba Recovery disk contains an image of the factory settings and it s identical to option HARD drive recovery but the drive erases the entire HARD disk.
  In my opinion, the disk is very useful, because if your drive HARD get faulty and you need a new one you can restore the settings from the factory with this disc.

  Anyway, if you have a problem during the installation of recovery, you should go to an authorized service provider. It could be a hardware malfunction, because a mistake shouldn't t normally appear due recovery facility.

• Of Nikon NEF files turn black after that importation is complete but visible in the bridge, PS, ARC and Win Explorer.

  I don't know if this has been asked recently, but I have another problem of import. I use the latest version of LR and Win 10:Lightroom version: CC 2015.2.1

  Hi wagga9

  Greetings!

  Of Nikon NEF files turn black after that importation is complete but visible in Bridge, PS

  It is a known problem and our team works about it.

  Please follow this link https://helpx.adobe.com/lightroom/kb/thumbnails-display-black-in-lightroom-6-2.html

  Here's a double thread:-images black turning Lightroom

  Let us know if this helps

  ~ Assani

• Satellite P100-473 - suddenly the screen turns black

  Hello

  Since a few days, I have a problem with my Satellite P100-473 (with Vista Home installed recently + teamspeak only) after you have installed the latest version of Nero (maybe a detail)
  and do not know how, all of a sudden the screen went black.
  I so reboot and still black but the laptop properly started, the screen is activated (light up/down).
  I'm trying not to switch the display on an external monitor (VGA and DVI) no signal.
  I remove the battery for a few minutes.

  After a lot of irritation I gave it a week, I am again yesterday and after two tests display return with an error (such as a debug message), I forgot to note due to the excitement... ten minutes later same problem again:'(.)
  Yesterday before restarting the screen, I wait to start completely > type my password > sound > wait a minute > and type ESC / enter key at random.

  Can you please help me to find the source of this problem and maybe the solution to solve?

  Thank you very much for your future assistance, I hope you understand my pathetic English
  Best regards

  Hello

  Wait. You said you use external LCD and an external LCD related to this laptop.
  Do you use an external monitor Samsung, and maybe have you installed MagicTune software on your laptop?
  Please check this box.

  As far as I know software Samsung MagicTune can permanently disable the integrated computer Toshiba LCD display screen. Why?
  Because the MagicTune software is designed for use with desktop computers that do not have a built-in LCD screen.
  If your integrated LCD display has been disabled by the MagicTune software, you will need to make an arrangement for repair with a Toshiba authorized Service partner.

  But I hope that you have not installed this software.

• Satellite M70-340 - white screen before windows loads

  I have istalled a new Windows XP on my laptop Satellite M70-340, and after having installed the drivers and the Quick Fix Engineering I restart the laptop...

  The laptop is the auto start and it stopped just before starting the loading (white screen and no disc HARD answer stopped - HDD led lighting-)
  I am able to get into the BIOS and change the boot order.

  I boot from the recovery cd, but it is is stopped with the same blank screen just before his screen should start.
  I boot from the Windows cd, but it is is stopped with the same blank screen just before the blue screen should start.

  I unplugged the battery and pluged in again and the problem continues to be.
  I have restored the defaults in the Bios, but it didn't work.

  Please help me

  You see the Toshiba start screen at the beginning of the boot process?

  I searched this forum for the same problem on M70 but I found nothing didn t.

  But I do remember that one of my friends had a similar question. If the adapter has been unplugged the system locked and the screen is dark.
  It has fixed in powerplay disable in the ATI graphics settings and it didn't put the CPU low speed in Toshiba Power saver mode fixed.

  But like I said this happened only together running the operating system without the AC adapter.

• IPhone 5 s screen turned black after jettisoning

  I dropped my Iphone 5s in the Park. The screen worked fine after release for 2-3 seconds and that I moved to the bench, it turned black on the first move. The touchscreen works perfectly fine because I can pick up calls. Is my broken screen?

  Hello

  It may help to follow the steps detailed here:

  • If your iPhone, iPad or iPod touch won't turn on - Apple Support

  However, as your iPhone has been abandoned and seems to have suffered damage, I suggest you contact Apple Support (mail service may be available) or make a booking Genius Bar to organize your iPhone to inspect and, if the service is recommended by Apple, to determine your available service options, deadlines and costs.

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/au/retail/Geniusbar/

  Repair service for iPhone price information are available here:

  • price of Service - Support Apple iPhone

• Satellite P30-110: the screen is blank, after working for a few minutes

  Hello.

  Can anyone adivse if they have encountered this problem before. After you start the system and worked on the laptop for a few minutes, the screen turns white as if the system is in standby mode. The only way to put it back on is by pressing the power button and everything continues normally until the problem reoccur.

  I have been informed that there may be a button faulty hibernation cela but surely you would say on the screen if the machine was going into hibernation with the usual calendar bar? And the fact that the screen turns back on as soon as you press the button shows his vigil no hibernation.

  Any adviser who can offer are welcome. If you need more information about the problem please let me know.

  Thank you very much

  Hi Paul,.

  If it is just the screen becomes black, but everything else seems to work fine, so I think that your FL inverter may be defective. This is the device that provides the lighting of the screen.

  I suggest that you only contact your nearest ASP for further diagnosis.

  Kind regards

• Satellite 1800 - 752S - the screen turns off

  Hello world.
  I have a satellite 1800 - 752S.
  Since an ew months ithas a weird problem: the screen turns off. If I press and release the button the lid on what it is, but after that turns off again quickly. OT goes off sometimes immediately, sometimes after a few minutes, or even hours. Sometimes it provides be when I run out of battery and bothers me on AC, sometimes against. It works fine, after I turn sleep or hibernation several times, and after a reboot, it bothers me. I've updated his BIOS for the lates on this site, which would not help. I guess it's a hardware problem, because it's the same problem under Linux, and I tried to install different versions of drivers and windows (not only the one of the recovery CD). Anyone have the same problem before. Any help will be appreciated.
  Thank you very much
  Roman

  Hello

  I think you're right, it's a hardware problem. But to be sure, try connecting an external monitor. If it works without problem while laptops, screen turns off, then it must be a hardware failure.

  I guess it's a problem with the FL inverter. You have to give your machine a service partner Toshiba for repair.

  Good bye

• After the update automatic, could not load desktop under the screen turns off after logon

  Original title: computer running Windows 8 will not correctly restart after automatic updates & close

  I have Windows 8 my computer does not start correctly after it has automatically closed for the automatic updates last night. When I turn on the computer I can connect as user, however once I do it says welcome and the screen turns white. The only thing visible is the cursor if I move the mouse. There is no Apps and I can't get to my desk or anything else. I tried to restart again and press F8 and nothing. However, I can bring up the Task Manager, but that's all. Help, please.

  Hi Patricia,

  I understand that you get a black screen after that it was closed automatically for automatic updates. It might be difficult when things don't work the way it should be on your computer. This problem might have occurred because of the conflicted with the system files update or could be a problem with the display card drivers may be due to the virus/malware infection.

  Many users complain about the issue with a black screen to logon Windows. Microsoft has not yet determined the exact cause of this problem.

  However; I suggest you to please follow the steps suggested by Scott Atk began August 30, 2014 in the following link and check if this can help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-performance/black-screen-when-logging-into-Windows-80-or/93bb4530-C31C-4a2d-91e6-7ec2fc420379

  Please answer us on the State of the question to help you further.

• Portege R100: The screen goes black after installing SP2

  Hello
  Currently, I tried to install SP2 for my laptop (Windows XP pro) R100. The end of the installation procedure I restarted the system, as requested. The windows logo appeared, then the screen went black and the only thing I could see was the mouse cursor.

  After several reboots, the situation did not do better. I tried to go on safe mode, but I had the same (only this time the black backround was typical registration of safe mode on the sides). I will perform a system restore without having to install SP2, but the fact that I am on a DSL connection most of the time very important SP2 installation.

  I would appreciate any solution to this problem.
  Thanks for your time.

  Hello

  As far as I know sometimes a few utilities and drivers must be updated after installation of the service pack 2 Microsoft.
  On the Toshiba driver page I found a backgrounder update of Microsoft Windows XP SP2 that contains a few s information about the utilities that must be updated.

  However, additional I found a lot of new drivers for R100.
  I think you should also try to update the old drivers as driver utility and the graphics card chipset.
  Eventually, it helps.

• Satellite 3000 - X 4: screen goes black after start

  Hello

  I have a laptop of s3000 - x 4 satellite.

  swiched top upward start then the screen goes black, I can just do the display to see loading, windows
  This happens even if I can get it to boot in safe mode, or when I enter setup.
  If I'm lucky, I have a minute of commissioning until the display changes. and as soon as I restart, I'm square.

  can anyone help? If it is a component, it is easy to find and replace?
  see you soon

  Colin

  Hello

  Have you tried to connect the external display?
  If this is not the case, try it. Also check out the switching between display devices with the FN + F5 key combination
  If this does not help, I would pick up the laptop with the Toshiba Recovery CD supplied. Also try to improve the shape of the Tosh site graphics driver.

  But if it won't work and you can't see anything on the screen so I guess there must be something wrong with the hardware. In this case only the ASP in your country is able to help you.

• BlackBerry Smartphones Storm1 screen turns black after sheathed

  I have Storm1 with v5.0.0.328 OS, with 3 "third party" installed applications. (Visual Voicemail, VZ Navigator and VZw tones) I do not have, or do anything else is running in the background. My problem is occasinally, after I unholster my Storm1, the screen is black. I press the buttons at the bottom of the screen, even the release button, nothing happens. I have to do a battery pull to Storm1 works again. Normally when I unholster Storm1, the wallpaper is displayed with a message, the screen is unlocked, press on unlock button to unlock. What's this problem of "memory leak" or something else?

  Thanks for the help. I did the upgrade to v5.0.0.419 on my Storm1. My computer is Windows Vista, so I had fun a little hard to find certain files (c:\program files\). He did not exactly "vender.xml", but I managed to make it work. I did the backup and restore when the software prompt RIM came out. Only problem, all my MMS saved disappeared, but a single message from Verizon is still there. I consider that it is minor, because I saved a few media media card. I can can still send and receive e-mails, sms. MMS. I do not know if this OS update will solve the occasianally Storm screen goes black, after unholstering. But I mark this resolved for now.  Thank you.

• tx2550ee starts but the screen is black after some time

  Hello

  I have pavilion tx2550ee and for a month only, it displays strange problem

  the problem:

  some time after reboot that he didn't watch anything, but windows is loaded and I hear the sound and everything is ok, but since the boot until windows is loaded, the screen is black I try to change the battery, working directly with the adapter, but nothing has changed! the screen is always black

  I leave a few time approx. 30 min it works and the display shows each thing and its ok!

  I don't know why I should leave some time at the screen to work?

  In brief

  the Tablet is booting and windows is loaded but the screen is black but after 30 minutes, it works well

  
  

  any idea?

  Thanks in advance.

  For this device, the BIOS has been certified for Windows 7 and Windows Vista only. (If you should be able to Flash the BIOS on Windows XP too, I would not recommed it).

• Satellite C660-1J2 - the screen goes black for a second

  Hey everybody.

  I recently changed my HARD drive and did a reinstall fresh, as previous was damaged. What is happening now is that whenever I have connect or disconnect the cable the screen goes black for a second. There is no real consequence of this, I'd rather just if there was an option to make it happen.

  Then, give a shout someone if you know how to deal with this.

  Hello

  > I have recently changed my HARD drive and did a reinstall of fees
  You have installed Windows from Toshiba normal Microsoft Windows disk or recovery disk?

  To me it sounds like that, you forgot to install the display driver. Also check the Manager of devices for the yellow exclamation points or unknown devices.
  Make sure that correct display driver is installed. You can download the latest version of Toshiba's official website:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Check this box!

• HELP - the screen is black, after you change the desktop properties

  original title: HELP!

  I was playing with office properties and you click an option of hitachi now the screen is black and there is a message that says freqency is out of reach?

  Restart your system in safe mode and try to set properties Office back to their original values. otherwise, try a restore point to return your system to a previous state.

  Good bye.