Satellite M70 - after HARD drive partitioned, the OS does not start


Good then this is a real doozy, and I hope that someone will help.

I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

I rebooted, and then after Windows restarted again completed.

NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

I'm really angry that this has happened and I just want to start over again.

Can someone help me with this?
I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

Help, please.

Thank you

I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
Check it!

Tags: Toshiba

Similar Questions

  • Bought the new computer windows 10, itunes has changed location of support for external hard drive. The music does not appear in itunes.


    Changing the iTunes media folder location setting affects only where new additions to your library will be stored.  To use a disk external drive to store your library complete (and assuming that you have access to the original data of the library on an old computer) you must copy the iTunes folder, by default in C:\Users\username\Music, on the external drive - structure library and its records should be like this:

    The hold button SHIFT DOWN when you start iTunes and when you see this message:

    Click choose a library... then find and select the iTunes Library.itl in iTunes on your external drive folder.

    For more information, see user turingtest2 on make a library of portable split.  You must also acquire a 2nd external drive and allows create and maintain a backup your library.

  • after update after effects cc 2015, the program does not start.

    Yesterday I did just a little update - now after update after that effects cc 2015 the program does not start. I have the message - aftereffex exe cannot start (0xc0000142) - an idea?

    Best regards


    The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.


    Let us know how things work after installing the update.

  • 750-103D want: I want to install a 3rd HARD drive but the system will not start

    Desktop motherboard has 5 heads SATA (of which 2 were used for the first DvD and HARD disk in the original Setup) and the box has 3 bays for HARD drive, but there is no additional power from the PSU cable.

    I installed a new SSD as my main and designated record the 1 TB of HARD drive that came with the desktop as my secondary school and office works just great.

    Now I tried to install an another 1.5 TB HARD drive for storage. I used a SATA power cable Y (1 male to 2 females) to extend the existing cable. However, to my great disappointment, the system is unable to start up. I guess that supply POWER 300 watts current is insufficient to start 3 disks to a single supply with extension cable.

    Issues related to the:

    1] sells HP a 500-watt power supply with power cable for SATA 3 HARD drive?

    [2] is a compatible power supply on the market (ie. not HP) who can stand in 750-103D envy? Brand/model and how much?

    Thank you.


    Probably, you have misunderstood my response.  Unplug the original HD boot drive.

    Your question is not the power supply lack of insufficient power.  I have observed remains with HP computers with a power supply that would support three HDs off a 300 Watt SATA power cable voltage.

    Perhaps the third HD is formatted incorrectly or is defective.  The other possibility is that your SATA Y cable connection is defective.  You also need good 5V and 12V.  In addition, if you have made any hardware changes to your PC you have not indicated, then it is possible that you may need a bigger power supply.

  • external hard drive and the USB does not

    When I connect my external hard drive or my USB which do not shown anymore.not or work


    Check the configuration/settings (BIOS/CMOS) often F2 when you start - make sure that USB is enabled.

    If a PC and if necessary the embedded USB can be disabled and a USB card can be used only
    is not expensive. For a laptop, using a real computer shop (no leeks and glances at a Best Buy
    or other stores) or system manufacturer support.


    Follow these steps to remove corruption and missing/damaged file system repair or replacement.

    Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

    Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN


    How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
    generates in Windows Vista cbs.log

    Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

    How to run the check disk at startup in Vista


    Then lets refresh the USB stack

    Control the click Control Panel - Device Manager - no matter where in the box of white/white - then the VIEW - see the
    Devices disabled - look around (with the exception of USB controllers) for your devices (can have
    zero or more than one) and top - right click UNINSTALL.

    Control Panel - right CLICK on EVERYTHING - Serial USB controllers - Device Manager and UNINSTALL
    all except the category itself - REBOOT - it refreshes the drive and battery USB

    This KB shows XP how to and the method of Vista is identical

    This is a utility to help you, but do 1 above.

    USBDeview is a small utility that lists all USB devices currently connected to your computer, thus
    as all USB devices that you previously used. Run Options and check the 1st three choices to see to it there
    Is there.


    You must remove all instances of the devices and restart.


    If necessary try these two:

    Tips for solving problems of USB devices - and a Mr Fixit

    Hardware devices not detected or not working - Mr. Fixit

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

  • Satellite C650 - after installing Win 7 SP1, computer does not start


    When I tried to launch the Win 7 Service pack 1 update, it 'impossible' and now I can't start my computer, even in safe mode. When I turn it on, no matter what I do (including let it run or by pressing F8) results in the message:

    "For Atheros PCIE Ethernet Controller v2.0.1.0 (15/12/09)
    Check the connection of the cable!
    PXE - M0F: Exit Intel PXE - ROM
    No boot device - insert boot disk and press any key ".

    i.e., I can't go to the start menu.

    The only thing I can access is the utility Boot screen by pressing F12. Experience with Service packs, I'm trying to access the system restore to undo the update, but I can't get there.

    Win 7 came preinstalled on my computer and my computer was working fine before I tried to install SP1, so all the solutions / advice would be much appreciated!

    Thank you


    When you see this message PXE for some reason laptop cannot detect the HARD drive and use it as a boot device.
    Enter please the BIOS settings and check if the HARD drive is listed correctly there. By default the BIOS settings and try to restart your laptop.

    Please post comments.

    BTW: you created the recovery DVDs?

  • After ESXi 5 intall, the server does not start.

    Hi all

    After you have installed the 5 ESXi, I get the following message after the restart:

    Intel Boot Agent, PXE Base Code


    DHCP: (it keeps looking for DHCP for a few seconds)

    then it stops and

    PXE - E53: no boot file received

    PXE - M0F: Exit Intel Boot Agent.

    No boot device - insert boot disk and press any key

    Any help will be appreciated.

    Thank you


    some Councils just don't boot from GPT disks

    1. install the 4.1 and 5 upgrade - then you will get a system that start of MBR

    2 use 'formatwithmbr' switch during installation - which also creates a system that uses MBR disks

  • replaced the hard drive, Illustrator CS4 now does not start

    After that I replaced my Mac (paid by Apple, fortunately) Fusion defective hard disk and restored everything from a Time Machine backup, Illustrator CS4 gives me error 150:30 when I try to run, with instructions to contact Adobe support web site. All I get there are some frequently asked questions and their cat gives suggestions repeated to try the forum. I'm surprised research here do not find other people who have had the same problem. I would have disabled AI CS4 before hand, but the disk failure came quickly and by surprise.

    I've logged into my Adobe account and could see my products, but could not find anywhere to administer anything, like resetting of the authorized computers one can in iTunes.

    Does anyone have a suggestion? I would of course welcome.

    Thank you


    Contact support to reset the activations, run the cleanup tool, and reinstall it correctly. There is no magic involved and I'm sure that your own web searches have come up with the same instructions, even if you seem to refuse to recognize them as the correct procedures.

    The Adobe Creative Cloud Cleaner tool allows to solve installation problems

    Download the CS4 products


  • I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    I deleted the boot camp trying to resize the hard drive on my mac pro book. now, the computer does not start without a bootable device, which I don't have, and any download must be on a windows machine. Can anyone help

    1. did you remove Bootcamp using disk utility?

    2 have you tried local restore or recovery of the Internet? - OS X: on OS X Recovery - Apple Support . Mac with built-in optical drives may need 'Gray' disks to boot the system.

  • Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

    Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

    original title: try to install clean vista

    You must set your BIOS to start on the DVD from the beginning to the top.

    You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

    For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

    If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

  • When it transfers data to the microcomputer by Uart, USB etc PC, it must either be aware access to the hard drive of the PC or not?

    I want to know when it transfers data to the microcomputer by Uart PC, USB etc., it must either be aware access to the hard drive of the PC or not.
    When the Windows operating system run my programs, hard drive is accessible when there is a space of memory?
    For example, virtual memory method return page-by-page, page-out using the drive hard when memory is used in full.
    I am using Windows 7 Home Premium 64-bit. The access to my PC hard drive light flashes even though I don't run my program.

    The lamp for the drive starts flashing as the computer is running and programs are running. Windows is a program that runs all the time and access the hard disk.

  • HP 6450 b HARD drive in secondary Bay does not work

    I bought a HARD drive caddy to mount a drive to expand on my HP 6450 b (Win 10) using the connection of SATA DVD ROM.

    First with SO HARD drive is a WD 250 GB SATA 2 3 GB/s.

    I see my product spec TEC and I chose a HARD Seagate 500 GB SATA 3 6 Gbps drive to put in the caddy as a secondary HARD drive.

    I mounted the caddy with the new HARD drive, but it does not work: initially, the portable green light turn on, but does not Society. Without any error message, after a few seconds the led become yellow and green for some time and after that the PC turns off.

    When I put off the caddy with the secondary HARD disk, the OS starts correctly.

    I read similar posts in the forum and I have:

    (1) check the option in the BIOS to activate the secondary HARD drive is active (in FACT, it is enable)

    (2) turn off the launch of the er disk HARD secondary (DONE)

    (3) test on the HARD drive (in FACT, it's OK)

    I tried to set up in BIOS the SATA 3 GB/s speed, but I can't find the option. I see that someone has done this action.

    That would be the problem?

    I also think that could be a problem with drivers to support the new secondary HARD drive, but I don't know how to do.

    Is there someone who could help me?

    Thank you


    Andrea_Mogni wrote:

    New test: the pc does not start if I put on the caddy without hard drive.

    I think it is proof that the problem is my caddy.

    I would also come to this conclusion. Request a RMA number for that one and find another brand.

  • The browser does not start after you have turned off and turned on the computer

    The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

    Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    Please report back to see if this helped you!

    • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

    Thank you

  • How can I reinstall windows xp when the computer does not start and there is no cdrom/dvd drive?

    I have an Acer netbook aspire one.  It will not boot past the windows logo.  I have a windows xp disc to reinstall windows, but the computer has no CD or dvd rom.  Can I copy cd of windows xp on startup SD memory card and reinstall windows?  Or can I run connect the non working pc a working PC to access the cdrom on the work pc to reinstall windows?

    First of all, you are mistaken when you say that the PC does not start.

    This is clearly starting. The problem comes from Windows, not with the real PC. It's actually a very important distinction!

    There are methods to repair Windows, but they can be a bit tedious. By all means, follow the advice given here to do if you're so inclined.

    If you would not rather to repair Windows (and I think it's interesting a try) or your repair attempts are unsuccessful, apparently, you would need to use an external optical disc drive and follow the instructions here:

  • After restarting the Services, service of the Foundation does not start

    Hi all

    Recently, I applied the patch and restarted services, later noted that the services of the Foundation does not start. I mentioned newspapers and show error below.

    < 29 April 2015 19:45:30 PDT > < Info > < WebLogicServer > < BEA-000377 > < start WebLogic Server with Oracle JRockit (R) Version R28.2.0-79-146777-1.6.0_29-20111005-1808-windows-x86_64 of Oracle Corporation >

    < 29 April 2015 19:45:31 PDT > < critical > < security > < BEA-090518 > < could not decrypt the username of {ESA} attribute value = 9e8e9w8ADkG/3Hx33gkE9Ukm29IxHIISKLeLw/FYfxTO0GcnA in the C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\ file. If you copied an attribute costed of another area in C:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\FoundationServices0\security\, replace the attribute encrypted by its value in clear text, and then restart the server. The attribute will be encrypted again. Otherwise, change all attributes encrypted values in clear text, and then restart the server. All the attributes of encryptable will be encrypted again. Decryption failed with the exception >

    Enter the user name to start WebLogic server:

    I have connected to the Weblogic Server and checked, the service of the Foundation is not started.

    We do not have the backup of the installation folder.

    Manually, I have edited the user name and password and the services, started but no luck.

    Get an idea on processBootProperties.cmd, I'll set it off for the new

    Please suggest.

    Thank you

    Hi all

    I have manually enter the credentials for the logical server and services. It worked.

    I did the same thing first, but I made a few typo errors in credentials, he killed for more than 1 hour...) :

    Thank you

Maybe you are looking for