Satellite M70: After the installation of WinXP Pro Player is wrong

Similar Questions

• My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  My sata cd rom a problem after re-installation of WinXP Pro by this cd rom; error code 041; How do I solve this problem

  It's almost certainly a driver problem.

  Please tell the service pack on your Windows® XP Pro level forum and the manufacturer and model of your system, if it is conditioned, or the make and model of your motherboard if it is not.  In addition, please tell us the manufacturer and model of the optical drive.

  First of all, if there is a system, go to the support Web site of the manufacturer for your system model.  If this is not a system, go to the support Web site of the manufacturer of the motherboard for your model of motherboard.  In the first case, you should find the drivers, chipset in particular drivers, updates and software for your system. Install all the that apply.  In the second case, you will find the drivers of integrated devices, chipset, updates and software for your motherboard drivers. Yet once, install all the that apply.  As we know nothing on the optical drive other it is attached via SATA, I can't talk about what to do there except that you should go to the manufacturer's support Web site and search for drivers and updated firmware for your model.

  It would have been helpful if you had provided more complete information on the installation of Windows, your system hardware and the optical drive.  The most complete information; more answers you will get.  Please, read:KB555375 - how to ask a question.

  Don't forget, no member of this forum is omniscient.

• Satellite A100-773: problem with the installation of WinXP Pro

  Hello

  I try to install Windows XP Prof on my new laptop A100-773 (Media WinXP Center preinstalled Edition). After that I put in the installation disk, restart the computer and then selected CD in the boot menu, it said something like "verification of hardware configuration". After that black screen and nothing more happens.

  Also, I tried to start Linux (Knoppix) CD. Same problem, at some stage, the system stops and doesn't do anything.

  Anyone has any idea how this problem could be solved?

  Thanks a lot for your answers in advance.

  Kind regards

  Chris

  Hello

  Have you tried to boot form CD recovery Toshiba or on the original CD of Microsoft?
  The recovery installation CD should generally work without any problem.
  In addition, if you want to retrieve the unit with the Toshiba Recovery CD you will get 2 modes. Standard and expert mode.

  I guess the message because there might be something wrong with the hardware or any device. I would recommend to enter the BIOS and check the settings. You can also try the options default and safe change.

  But first try to boot from the recovery CD.

• Satellite A - after the installation of Windows, all information is lost

  I'm sorry but I don t know is that part of the forum is the right part or not.

  I have a Satellite A and you have to reinstall windows on it. After installation I check the phone to see the pattern, but all the information is lost.
  I try with Everest to find the driver or something else, but nothing to do, try with auto detection too but says "the product exist"... ".

  Can someone help me please?

  The satellite has a Radeon mobility 9600/9700 m10/m11
  Realtek alc 250@intel 8280 ich4-m 1dbm
  Realtek rtl 8139 family
  and use Intel Centrino

  I have no more information atm...

  concerning

  Hello

  First of all I would also be important to know which laptop Satellite you exactly.
  You can add this information please?

  What information do you mean exactly?
  I guess you need the drivers for your model and these can be found here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• Satellite L300D: After the installation of Win 7 new webcam does not work

  I have toshiba satellite l300/l300d laptop series I just install windows 7 Home premium software camera assistant does not work how can I solve this problem my guide thank you

  Hi rahmmar,

  > software assistant camera does not work
  Does that mean exactly?
  You get an error message during installation or what exactly is going on?

  On the Toshiba driver download page, I was able to find a driver of the webcam for Satellite L300D and Windows 7 32-bit. Have you tried this version?

• What to do after the installation of AC Pro froze?

  Mac OS 10.10.5 (Yosemite) and using Safari 10.1.  Installer obtained 100% installed and then he 'hooked '?  I waited at least 10 minutes and then a force has left on the Adobe installer.  Although I downloaded a free trial version, the software doesn't let me without trying to use it to force me to buy a subscription NOW.  (Thought that the trial version was given a to evaluate the product?)  How to re - install a real trial version for free and download the software to run without the experimentally tries to get a subscription NOW? It is that this version will not work. Should I somehow clearly on the 'bad' install and a 2nd try with another browser?  And also, should I switch to Chrome or Firefox as the 2nd attempt to install the browser?  Thanks for your help. And please forgive the mini rant. Frustrated, and frankly, I expect better from Adobe. They are usually so excellent that I am shocked to have problems with one of their newest products.

  There is nothing easy about to restore a trial initially expiring on the same computer, Adobe trial software has expired at the beginning

  You can install the trial on another computer.

• Satellite A300 - after the installation of Windows 7 How do I recover to factory condition?

  I recently installed windows 7 on my laptop and now I want to remove and restore my computer to its factory condition.

  When I enter the "advanced boot menu" I choose "repair my computer", there is a menu in which I select "fix... something." Then it pops up a message that says there is nothing wrong with my computer and it's where all end.

  Any ideas?

  Thank you

  Hello!

  I think you are trying to restore Vista using the HARD drive recovery option to fix my computer. But note my friend, this option is currently not possible because you have installed another OS. This HARD drive recovery is available on a Vista operating system installed or let s says the version of Vista preinstalled Toshiba.

  You can only restore to factory State, if you are using the Toshiba recovery disc. Boot from it and follow the instructions on the screen.

  Good bye

• Layout error for Sony Picture Package even after the installation of Adobe Flash Player.

  When trying to open Sony Picture Package-message says need to install Macromedia Flash Player.  After you download Adobe Flash Player - always get the same message.

  That you ask for help from Sony at http://www.sony.com/index.php or Adobe http://kb2.adobe.com/cps/414/tn_4149.html and http://www.adobe.com/support/flashplayer/

• Audio does not work after the installation of Vista on Satellite Pro a series?

  Done a format and a new facility with vista ultimate and can't get the audio from realtek to work.
  The drivers install properly but don't have still no sound.

  Download realtek 97 and drivers HD, but still no luck.

  I had this problem some time and fixed it but I can't find where I found the solution of :(

  Any help would be great, thanks!

  Hello

  First if all would be very useful to know which model of laptop you have.
  Second, you could find the driver of his right on the page of Toshiba and so you n t need to test several audio drivers! The one on the Toshiba driver site works for sure.

  I read about a similar problem on Vista OS and these Toshiba document should help you:
  [Audio cut off (no sound) after the installation of Windows Vista: http://askiris.toshiba.com/ToshibaSupportSite/search.do?cmd=displayKC&docType=kc&externalId=1886 758xml & sliceId = & dialogid = 54568603 & stateId = 0 0 51373343]

  Check it out!

• Problem starting after the installation of the NTI Echo Satellite P50-B-11V

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Posted by marianbur
  

  Hi guys. I have problems to start mid laptop computer (Toshiba Satellite P50-B-11V, F04236S) after the installation of NTI Echo3 to migrate the data from the drive HARD original to a new SSD (Toshiba 480 GB Q300 series).

  Error: file/echo not found boot/initrd.gz. Pilot pata-platform...
  Kernel panic not syncing VFS: Don't mount rootfson unknown - black (0,0).

  Anyone facing this problem? Please advice if you have the time.
  I tried several times to repair Windows (F12 key) and I have tried different ways to migrate data but the problem even after reboot.

  Thanks fo your time.

  Dear marianbur,

  New laptop having same problem here, is now stuck... Have you received still no solution?

  Greetz

• Satellite P100-119 - software after the installation of recovery

  I use a Toshiba Satellite P100-119 since 2006. I want to run the original liveries Product Recovery CD after you back up all my data, so that with a vacuum system, the laptop gets even faster.

  But as there were pre-installed software (office, Toshiba programms) when I bought it, I don't know if they went after the recovery. I do not have CD for these programs, they were just pre-installed and what my Windows xp, should recover fully with the cd?

  Hey Buddy,

  After the installation of recovery, you have the same settings that bought the laptop. With other words recovery disk will restore the box settings.

  Firstly the recovery disk will wipe the entire HARD drive and remove all. After this Windows will be installed all the drivers and tools. In addition, will be also installed software preinstalled such as office, etc. and you can use it again. :)

  Backup all important data like the photo, music, etc. but everything will be removed for a clean install of Windows.

• Missing or corrupt files after the installation of the SP3 for XP PRO

  Norton Anti virus history shows no deletions of these files.

  * original title - I have missing files or damaged after the installation of the SP3 for XP PRO. These are files of driver for my DVD player and Camera.Specifically [dcptp.sys] can not be consulted online *.

  And have you tried to reinstall the DVD software & camera?

  Why SP3 was installed years ago?

  Currently, the computer is fully patched to Windows Update?

  ==========================

  Device Manager and network connections may be blank after you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953791

  Device Manager may not show all devices and network connections may not display network connections after installing Windows XP Service Pack 3
  http://support.Microsoft.com/kb/953979

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Old dualboot options still available after the installation of Windows 8 Pro on a desktop Pc which had XP and Windows 8 prewiev version on that front.

  Old dualboot options still available after the installation of Windows 8 Pro on desktop in XP, but now triple options. Windows 8 Pro (volume 1), Windows 8, old windows installation.  Anyone who knows how to get rid of the last two options?  The good thing is now that I don't have to put a password everytime I turn on the computer.

  Press the Windows key + X and then click System

  

  Click on advanced system settings

  Click the Advanced tab

  Under Startup and recovery, click settings

  

  Select Windows 8 and uncheck the box "time to display list of operating systems.

• Adobe Premiere Pro requires new mac operating system. My Adobe programs already installed would work after the installation of the new operating system?

  Hey there,

  I think to get the Premiere Pro, which requires that the new Mac operating system. But I installed the other Adobe programs such as Photoshop, Indesign etc years ago.  These work on my current operating system (= Mac OS X 10.8.5).) Anyway, now I wonder if my programs already installed Adobe might work after the installation of the new operating system.

  Any ideas what to do?

  Thank you very much.

  Yes, they will work in the new OS.

  Kind regards

  Hervé Khare

• Satellite L655 touchpad button ON / OFF does not work after the installation of VAP

  Why the Start button / stop the touch pad does not work after the installation of vap?

  May I ask what system and what PPV version do you have installed?

  I assume you mean on the Fn + F9 key combination...
  Is this right?

  Another FN button work as shouldy?