Satellite M70: ConfigFree cannot find WiFi signal - counter ist off

Similar Questions

• Satellite M70 - ConfigFree - error turn the WLAN light

  ... morning...

  I know I've seen a lot of articles on the Internet about this problem, but, so far, not correct answers or solutions.

  In Satellite M70, although wifi turns the front is 'ON' and led lights, ConfigFree sounds and shows "error...". Turn on the switch"and also is anable to find wifi devices all around.

  I have the latest drivers, the latest version, I disabled the wifi MS. program control... nothing. !!!
  Is not a big problem, wifi works, but it seems a troublesome BUG for Toshiba...

  Bye of the Italy
  Renzo

  I doubt s a Configfree bug.
  The Configfree is pre-installed on my Toshi and it of running great.

  Here's a brief info how to use Configfree:
  http://APS2.toshiba-tro.de/KB0/HTD9202JI0000R01.htm

  Notes; This message appears if you have not activated the WLan correctly!
  It takes the WLan switch on WE (LED should appear) and in addition, you will need to use FN + F8 to activate the WLan

• Satellite L50-B-1N8 - weak wifi signal

  Hello

  So two weeks ago, I bought a new laptop of Toshiba Satellite L50-B-1N8 of Argos.

  He never had too good a force wifi signal (bars never complete - even when sitting next to the wifi router) but I thought it was due to my wifi box and possibly the time of garbage that we had.

  However, I still have my old laptop, and when you check the WiFi side by side, my old portable Samsug picked up the signal full or almost full so this new Toshiba picked up a bar at a push.

  Since then, I took the laptop to my parents and he struggles to get the good WiFi, if no signal there too.

  It's super frustrating because it get wifi, it get just a very weak signal or nothing at all, and as soon as I move my laptop... literally a few centimetres, it will change the wifi signal or my wifi signal is cut and it will be impossible to connect.

  I did everything I can think of troubleshooting to actually factory reset my laptop that none has worked so far. The factory reset seems to have actually done worse, rather better!

  As I said, my router is not the problem here, I have my old laptop that connects very well, as well as two other laptops and mobile devices that all have connected to wifi very well and with full signal!

  I disabled all these wifi devices to see if this is the problem, but that did not help or the other. I also have a booster of wifi in the House, so all devices have full or almost full signal, but it seems of no use for this Toshiba.

  I lose my home, is there anything else I can do? I'm still in the warranty of 30 days of Argos if the laptop is down, but I just can't think of anything to try. I just hope that if the laptop is down Argos will help and either pay the phone or Exchange.

  Any help or advice would be much appreciated. :)

  I think first of all you must check if the wireless performance question isn't related to energy saving settings.

  Go to the control panel? Windows power options.
  Choose the current power plan
  Now, you must click Advanced power settings.

  In Advanced Power settings you will find different options, search for LAN wireless (WiFi) and choose the Performance for both options (battery and power)
  After that, restart the device.

  I hope that this short change might help you.

• Satellite M70 - CLI - cannot install display or SM Bus controller driver

  Hello

  I have a Satellite M70 - cli PSM73C-CL100E and I got a new hard drive and loaded Windows xp. I went on the Toshiba site and downloaded and installed all the drivers. I have no problem with the wifi atheros, the sound, modem or chipset drivers. I also updated the bios v2.10 all successfully.

  The problem is with the video card. I used huntersoft program and know that the chipset is an ATI. He also says it's an ATIradeon xpress 200 m with 128 MB DDR shared video. When I try and install the ATI driver it says Setup could not complete the installation. Try to configure your graphics card with the standard vga driver.

  I spent hours on the net. I tried the ATI L30 XP driver and it does the same thing. I tried the driver ATI radeon xpress 200 m and it says not found material. I don't have the original CD I know he works as the old drive worked fine. Unfortunately, I wiped as well to put in a laptop more old. I should have gotten the drivers out of it. :(

  Does anyone have an idea? It drives me crazy! Thanks for any help. Marilyn

  Hi mjmx4,

  How have you tried to install the display driver?

  Normally, you can install the driver (screen) If you run the setup.exe file that comes with the driver package. Follow the instructions on the screen thanks to the installation of the driver, the driver will be installed.

  Alternative you can install the driver if you go to Device Manager and right click on the graphics card. Choose update driver and use advanced installation where you can choose the directory and the driver yourself.

  By the way: before starting with the installation of the driver, you must install Service Pack 3 for XP.

• Satellite 1000-Z2: cannot find operating system

  Hello

  I have a satellite 1000 Z2 with a windows xp operating system. When I turn on the computer, I get the message "cannot find the operating system". I tried using the recovery disk, but I get an error message saying that there is a mistake of partitioning, and it does not work. I watched utility recovery options to see if I can reformat the hard disk that you use this method, but I'm out of my League and don't know what do the options mean. Any help would be greatly appreciated.

  Thanks in advance

  Hi Dex

  I hate to be the bearer of bad news, but it means that your hard drive is broken or is a failure.

  If you have a bootable diskette that puts in the BACK, use it and see if it recognizes your hard C disc drive (or whatever your drive letter). If she sees it then do a DIR and see if your files are still there. If it does not find your hard drive chances are, there not.

  Good luck!

• Satellite M70-181 - cannot see the wireless network

  Hello

  I reinstalled the entire system (Windows XP) and now system did not see the network wireless at all. How can I install it and put it back?

  Laptop Satellite M70-181.

  Thank you.

  Hello!

  Have you installed all the drivers for your laptop and also the network wireless driver? You can find all the drivers on the Toshiba site.
  Check for yellow exclamation marks Device Manager.

  Here in the forum, you can find 100 or discussions on the wireless LAN using.. Please search for it.
  Use of WLAN you should check the TCP/IP (DHCP or IP) WLAN card settings and you should use the same standard WLAN (e.g. 802. 11b) as on the router. Then, you should see the router and if you know the password, however, you can connect.
  If you can find t the router, disconnect it from the AC/DC adapter for 5 minutes and then plug it in again.

  Good bye

• Satellite M70-173: cannot install XP Pro

  I wonder if someone can help me. Recently, I bought the laptop Satellite M70-173. My problem is that it comes with XP Home. I need XP Pro. I bought XP Pro, but when I try and boot from the Disc... the drivers are starting to load up and then it freezes.

  To restart, the only is to unplug the power and remove the batery. I checked the disc on another laptop as a test and it works. Any ideas? One eventually is to create a windows startup disk and format? But is not a floppy drive. Many tried to copy the boot to a cd disk but does not drive. Any help would be appreciated

  Thank you

  Hello

  As far as I know that the Intel SATA AHCI Controller driver has been installed on this device.
  This driver is required for SATA hard drives. The OS Setup is unable to start without this driver, but then the installation hangs.
  On this page of intel for drivers:
  http://support.Intel.com/support/chipsets/IMSM/sb/CS-021701.htm

  But the recovery procedure works with the recovery CD?
  Have you created a CD of Drivers and tools with the function that has been placed in the assistance of Toshiba?

  You should also find this driver very necessary.

  Good bye

• Satellite T110-11U - cannot find the router WLAN

  Hello

  I have a Toshiba Satellite T110-11U. Have had since February and loved it-fortunately it wireless used throughout the House. Then one day on a month, unless I was in the same room that the wireless router, Wireless does not work. I have 2 other laptops (and iPhone) which still connect wirelessly throughout the House and the garden without problem.
  As you can imagine, it was very strange. When I take in the garden, my other laptops are all networks wireless in the region, but my Toshiba can't find any.

  Suspecting it was a driver problem, I made sure that the wireless drivers are up-to-date. With no joy, I got the system as it was at the time of purchase (do a complete restoration by interupting, starting and leaving the hard drive to be deleted and reinstalled etc.). Still the same problem. I even changed the rooms in which the router is, and the same problem - the Toshiba cannot find the router unless the router is located a few meters from the laptop.

  Until I lose the will to live, can anyone suggest the cause of my problems, or is it time I admitted defeat and brought back to the Comet under warranty (where likely test next to a wireless router and tell me everything is fine!).

  Thank you very much

  Steve.

  Hey Buddy,

  Did you check if the wireless network card is recognized correctly in the Device Manager? There may be a yellow exclamation or unknown device. Try also updating the driver WLAN from Toshiba Web site:
  http://APS2.toshiba-tro.de/WLAN/

  See all other WLAN routers?
  The wireless network card can be activated using a combination of keys FN + F8 and in the BIOS. In the BIOS, you should also load default settings and test again.

• Satellite M70-337: cannot install the Wlan driver

  Hello!

  My Satellite M70-337 has a problem. WiFi does not work and I can't install the driver for network controller. I downloaded all the drivers from the Toshiba Web site but it still does not work. If anyone knows what's going on, please let me know.

  My email: [email protected] Best Rgs.

  Hey Buddy

  Depending on the laptop that you use, you will need to choose the right WLan driver.
  Have you downloaded the WLan driver in the computer category laptop good?

  It seems that the satellite M70-337 contains the number of PSM77E and that is why you chose this series of mobile in the download form.

  Check that you have installed the wireless network card. It is important because the laptop might be bundled with various wireless network cards; for example with Intel or Atheros.

  I think that if you chose the right laptop and use the good Wlan card that everything will work out ;)

• Satellite A200-1AE cannot find my disk hard flash

  Hi to everyone.

  I have a SATELLITE A200 1AE and I have a little problem...
  My phone cannot find my disk hard flash. I contact toshiba here in Greece, and they told me that they don't know what to do!

  Can you help me please?

  THANKS ANYWAYYYY

  Hello

  Can you please write a little bit more kill your issue? Since when you noticed this problem? What did you do last time? Maybe installed WXP and now the HARD drive is not visible for the BIOS or does not appear when you use F12 at startup?

  Please write a little more. I don't think that the service can't do anything.

• Satellite M70: Could not find a mass storage driver

  Hey there,

  I installed a new satellite m70. But I can't seem to find a driver for mass storage. The problem is I don't know which driver it is but my machine keeps bugging me. If anyone happens to know what device need to install please, help me.

  Thanks in advance!

  zichzach

  Hello

  Why don t you use the recovery CD?
  It all the drivers, tools, and utilities are preinstalled and you only need to start the recovery procedure. It takes 20 minutes, and then the unit works very well.

  Good bye

• Satellite M70-394: cannot read my DVD UK

  I bought a new laptop Satellite M70 394 and went to live in Brazil for 6 months. Upon returning to the United Kingdom my DVD in the United Kingdom will not play? I asked Google, and it is said that you can re - set up your computer to a correct area 5 times only.

  But my laptop will not be reset once?... Can you tell me how to re - set up in the United Kingdom?
  Please send me an email to [email protected]

  Hello

  It s doesn't know only not for me that the Windows operating system could change this setting automatically.
  Anyway, the DVD region code is editable in the STRANGE properties.

  Simply by right-clicking on the CD/DVD drive, select the Hardware tab and select the CD/DVD drive properties! Then go to DVD region and select Kingdome United as new box and press OK.

  Check it out!

• Satellite M70-173 - cannot burn CDs or DVDs

  Hello

  I have an old but expensive laptop (Satellite M70-173). The CD/DVD drive is a carpet * a UJ - 841 s and can currently only read DVDs and CDs
  I have Nero installed 8.3.7.1, but it does not allow me to burn any DVD or CD
  I have all the updates that are installed for Nero, have also removed the "upper and lower limits" in the registry.

  It is not a mark of DVD or CD that I have not yet tried, but they all are coasters.

  I have the following options:

  1. try to set the drive - either with the technical assistance of the forum or replace the disk, so I decided that it is a hardware error

  2 buy a new laptop - but also like some advise on how to "clone" of the current notebook that I have so many other programs installed that I bought over the years and do not want to lose.

  I made copies pdf of burning errors I can post if necessary.

  Any help is welcome

  Kind regards
  Juan

  Hello!

  > I made copies pdf errors burning I can post if necessary.
  Yes, I think it's a good idea. ;)
  Otherwise it of a bit difficult to help you.

  But what CDs and DVDs you tried to burn? I have good experiences with Verbatim and TDK. Check it!
  And you should burn on a lower speed for CD e. g. 16 x.

  Good bye

• printer Brother MFC-J6910DW loaded onto PC Dell 9300, shared on the network, running windows 7 on Toshiba Satellite laptop, it cannot find the printer cannot print. ,

  other home computers can find and print on the Brother MFC-J6910DW, but my Toshiba laptop cannot find or print. How can I fix? Not too much computer.

  Hello

  Thanks for posting your query in the Microsoft community!

  I understand that you can not print on a network share. I will try to help you with this question.

  (1) did you make any changes before the show?
  (2) you receive an error message/code?
  (3) what is a wired or a wireless printer?

  I can't print from my computer over the network. (For Windows®)
  http://welcome.solutions.brother.com/BSC/public/EU/eu_ot/en/FAQ/FAQ/000000/002600/000056/faq002656_003.html?reg=EU&c=eu_ot&lang=en&prod=mfcj6910dw_all&cat=114
   
   
  Please report if you are still having the problem. I will be happy to provide you with the additional options that you can use to get the problem resolved.
  We can't wait to hear back on your part.

• Satellite A100-495 - Intel 3945abg wireless network card cannot find wifi networks

  Greetings,

  I have some problems with networks wireless on my laptop Satellite A100-495.

  The problem is: my wireless adapter (intel / pro 3945abg) doesn't seem to find wireless networks. If I portable place very close to my router wireless (such as 1 m) - connection can be established. If I move away (~ 5 m)-no connection or 'very bad' quality and constantly broken. Other notebooks I've tried still have "very good" quality at the same range.

  This happens with other routers as well. And I can not any sign of wi - fi in my Uni (my colleagues have no problem with their machines).

  I tried to play up with some parameters. Reinstalled adapter. Downloaded the latest drivers. Nothing helps.

  A tip? Thank you in advance.

  Hello

  Something like that happened to me a long time ago.
  I used the Wlan configuration option to own Windows. For several months, I use the Intel Proset configuration utility to establish the WiFi connection!
  It works!

  In addition, I have disabled the power Wlan option in the Wlan card properties save and adjust the intensity of the signal at top. I remember, in the advanced properties, you can find the 802.11 option preamble. The value is Long and short on my laptop.

  Hey dude... Check it out.