Satellite M70 - display problem

When Windows does not finish loading, then everything is ok

But when the Windows operating system has finished initializing, it shows me this:

http://IPicture.ru/Gallery/viewfull/4675164.html

Hello

Do you mean the red signs on the screen?
Sorry, but it very difficult to recognize something

Try to reinstall the display driver and check if this disappears.

In addition, you could connect an external monitor and could check if the same question would be visible on the second monitor.
This procedure could be useful to know what could be wrong or what role would have problems.
Generally, if the same is visible on the screens of stand, then a problem could be linked to the faulty graphics card.
If the issue is visible on one monitor then a defective screen could lead to problems

However, first check the update of the graphics driver

Good luck

Tags: Toshiba

Similar Questions

  • Satellite M70-239 - problems with brightness adjustment

    Hello

    I ve got this laptop from my father after I buyed a new. Actually everything´s with him very well. But one thing is a little strange, I think.
    My old laptop and other portable that I had before, has the ability to control things like the brightness of the screen when you connect to load automatically. So not for this one. Nothing happens.

    Windows doesn´t also shows the remaining battery life expectancy and other things like that. These functions are not supported by this guy? I ve installed the latest bios version 1.70, which is available on the official website and I m using Windows XP.

    Someone at - it the same problem and is there a solution for this? Maybe you can help me.

    welcome them

    Hello

    Satellite M70 was delivered with Windows XP edition family, and Windows XP Home typical configuration. I imagine that you have installed all Toshiba tools and utilities, so it must there also have preinstalled Toshiba Power saver.

    He yiou can see profiles of different powers and each of them can be configured separately. Thus, when the laptop is connected to power notebook AC power will be the mode full power. There you can set LCD brightness to the maximum level.
    When the laptop is on battery will then serve others power plan. Compare the settings in two power modes and choose your preferred settings.

    Brightness level can also be changed with the key FN + F6/F7 combination.
    Of course, this will works if all Toshiba tools and utilities are preinstalled.

  • Satellite M70 display: how to disable manually?

    I want to turn off the laptop display computer manually(Satellite M70), while he is engaged in work (in this case, work doesn´t addition off energy saving mode). Is there a way?

    Why would I do this? ---> When the books did a big download or working on a project long as video rendering (for many hours / overnight), I Don t need the display. I could close the lid to turn off the screen, but it isn´t a software way?

    I have Windows XP use residence with all the original Toshiba-installed software.

    Hello

    My camera works very often during the night, but I use monitor off option in energy saver and it works well in my case. As far as I know it is only software way that you can use, but the cover is not bad idea.

  • The satellite M60 display problems

    Hello

    I bought a satellite M60 a month ago, and since then, I've been strugling trying to solve a problem that has to do with the display (ATI 700 X mobility).
    When I play some games (the dawn of war, Unreal tournament...) the computer freezes completely, I actually have to force stop it to restart.
    Another problem, that I have seen is with Mixmeister Pro 6, the video playback is erratic, it is as if the computer is unable to handle any overload.

    I tried the upgrade of drivers, nothing works, then I installed the third party Omega drivers, but once again, nothing to do.

    Since the purchase of the M60, I had to correct problems of Wirless and PCMCIA card through driver updates, but there is nothing that I'm be able to do to resolve this display problem.

    I am quite convinced it's a driver issue, but then again, nothing is certain.

    If anyone can help me please I'm getting desperate.

    Hello

    Well, it's not easy to say why it happens but one of my friends has sometimes even appearance but on another unit. If he plays a high-performance games unity cling.
    In my view, this could be a heating problem. Playing games is hard work for the laptop, because all parts (bars of memory, processor, graphics card, etc.) work with max performance and produce a lot of heat. Most laptops are not developed for this.

    However, you should always use the graphics driver from Toshiba. I found the latest version of 15/07/05. It is a display 8.121.050.322A driver. In addition, you must install latest DirectX. I think that it s a 9.1. Check whether the fixes for these games are available.

    Second, if video playback is erratic, it seems that the OS is fully committed.
    In this case, you should check the processes that run in the background of the operating system.
    In addition, try to defragment the HARD disk

    Good bye

  • Satellite L850 - display problems external 1080 p

    I did turn my laptop Satellite L850 via HDMI to an external monitor without problem for many months.

    A couple of weeks, I tried to update the catalyst driver and have had problems since.
    Basically now when I select mode 1080 p via the Catalyst Control Panel, it makes the screen flash and present vertical lines.

    Occasionally, it will work for a short time, even up to a full day and it will randomly start once again. I can play a game in 1080 p mode and it will be totally random, sometimes which allows me to play for hours without having the screen flashes black while the other times, it starts flashing constantly and the only way to fix it is to reboot or pull the HDMI cable and plug back and cross your fingers you have enough time to reopen the catalyst and change in 720 p which is always stable.

    I tried:

    1 using the AMD catalyst removal tool and resettlement through the catalyst of origin Toshiba drivers factory default
    2. use to restore the system to go back before I made the changes
    3 using the removal tool from AMD Catalyst and update to the latest version via the site Web of AMD.
    4 reinstall my chipset with #1 drivers
    5 tried another monitor (still happens)

    On a side note, whenever I use the removal tool it removes my USB drivers too and I have to reinstall.

    The current graphics driver is AMD Radeon HD 7670 M and I also tried the solution on here http://www.mytoshiba.com.au/support/item/781 tech support forum.

    I ran out of options other than a full format and reinstall I want to avoid if possible. Any suggestions would be greatly appreciated.

    Thanks in advance

    Hello

    The AMD Catalyst (control software) update would not solve the issue.
    You need to update the graphics driver too!
    The graphics card driver can be uninstalled in Device Manager!

    I found also this Toshiba document to similar topic which appeared after the phone woke from sleep mode.
    [After sleep mode, a distorted image or a split screen may be displayed: http://aps2.toshiba-tro.de/kb0/TSB3903IB0000R01.htm]

    This problem was caused by the display AMD. V9.12.0.0 driver, which was automatically installed through the Windows Update feature.

    Download and install the driver of Toshiba page of European driver that should solve the issue of the line

  • Satellite A660 - display problems, very dark display

    Hello

    I'm at the end of help please.

    I have a Toshiba Satellite A660 PSAW3A-07P00R.

    recently, it has been very, very dark display on the screen, almost impossible to see.
    I tried the following the problem solved.

    1. set the brightness to the MAX in the operating system, power management, etc.
    2 reset the BIOS to default settings.
    3. set the brightness to the MAX on the laptop brightness settings.
    4. check the external display via a VGA cable. tested ok.
    5. I bought a new LED 16 "screen but the new screen has the same problems. If I understand correctly, LED screens (1 data cable video on the bottom of the screen to connect to the motherboard) have the "inverter" built into the display, so appears not to be a problem of map display, brightness or graphics. I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

    is there something easy, I missed, or something I have not tried?
    has anyone else experienced this problem and solved?

    Thank you in advance.

    > I would be fair to assume that this is related to the data cable from the screen? If Yes, is a piece that can come from Toshiba? or something easily fixable?

    As much as I know there is no FL inverter then, or you can override the display or the cable (LCD/FL)
    LVDS cable) with a new one and the test shows again.
    I found a compatible: K000103140 LVDS CABLE

  • Satellite P100 - display problem after installing the Samsumg software

    Hello

    I have a Toshiba P100-PSPA3 and just bought a new external monitor Sincmaster from Samsung. I installed it yesterday and everything works fine, I just plug in and the laptop recognizes it as a second monitor. Then I noticed the monitor comes with a CD and they recommend you to install the components of this CD.

    I installed the driver and still works fine but then I installed a software called * Magic money *, it is said that I should make a new start, I did and the image comes in the second monitor, * my laptop screen is black.*
    Then I begin to try all the possible solution I had in my head. I open this Magic Tune, and he says that it s not compatible with my computer, so I uninstall it. I have downloaded the drivers from Nvidia, Toshiba, installed again and again doesn´t work.

    I prove with the nvidia settings and the West without change. NVIDIA doesn´t recognize my laptop as a monitor, screen it recognizes just the Samsumg Sincmaster.

    I looked for people with the same problem in other forums and a possible solution was to turn off the computer, remove the battery and press the power for a few seconds, trying to carry out the computer. I did and it didn t work.

    Someone here could give me a light? I m totally lost now and I have to work with my computer in the next few days!
    Thank you very much
    Ivan

    Hello

    This software is not known to me and it is important to say that notebook manufacturers may not support some third part software.

    I put t know if this software must be preinstalled but I'm sure you can use your external display without it. When the external display is connected, you can switch between the LCD and external monitor by using the FN + F5 key combination. If you want to extend the display outside a use Windows display settings. It should work. I tested several laptop Toshiba with a few different monitors in my office and I n t noticed no problem.

    Have you already solved your problem or you are still looking for the solution?

  • Satellite A210 display problems

    Hi all

    I like my Toshiba A210-10Y, but there seems to be some problems with it.

    Portable computer does not always start immediately; Sometimes, I have to press the 'close' button because the Black Guard screen and the blue satellite does not burn (but you can hear it make a sound and light Burns 'on').
    * Close the screen for a while, is a no-go for my laptop. I already changed the "loading windows after closing" settings (sorry, my laptop is Dutch so I don't know what said that.. English for the Dutch people here 'windows hervatten'.) But even that does not always work so I have to press the close button and restart my laptop (how boring when you're in school). What I really want is to close the screen and open it again and go right, back to work... like everyone :(
    Blue screen has become a common friend. Sometimes when you're at work... type a little bit, you know. The computer is fr blue screen reboots without reason! It goes right down!
    * I often blocks on the screen... not dead pixels, but the Brown block on the top of the screen... sometimes they disappear, sometimes not.
    * Lately, I have to restart my computer over and over again, because after he loaded it sometimes stuck... "crash" again (not blue screen of death, but a white layer)

    I still have the original warranty and I bought an extended warranty. I can fix it on myself with some drivers or re-install windows (vista) or do I give the nice people of the store I bought a call?

    Thank you.

    Hmm it of really difficult to say what's wrong with your laptop.
    Sounds a bit like your screen to wake up from stand-by or hibernation mode.

    But on the other hand is more sounds like a graphics card problem.
    I mean especially this statement:
    > Blue screen has become a common friend. Sometimes when you're at work... Type a little bit, you know. The computer is fr blue screen reboots without reason! It goes right down! I often blocks on the screen not dead pixels, but the Brown block on the top of the screen... Sometimes they disappear, sometimes not.

    It sounds really not good if you ve hangs on the screen!

    In your case, it would be really desirable to contact the ASP in your country.
    The fact is that your laptop warranty is valid, and if something would be wrong with parts, it should be fixed for free
    I think that the ASP is not a bad idea.

    Good bye

  • Satellite L10 - display problem

    Display don't shoot upward.
    I think that the power supply cord has been wrong port. Could it be a fuse?

    Hello

    To be honest I n know if that's the reason or not, but it would be interesting to know if you can see an image on the external monitor.
    You can check this?

    Satellite L10 is pretty old notebook then maybe you can get parts of second hand cheap on ebay.

  • Satellite M70-190 - problem with USB

    Hello!
    After you uninstall Windows XP and BIOS update, I have a problem with the USB ports. My work does ' t of USB flash drive. Windows also find a USB flash drive, but I can't find it in "my computer".
    If anyone idea about this problem?
    PS, External HARD drive works perfectly, as the USB mouse and USB WiMax modem.
    I m hoping someone out there can help with this problem.

    If I understand you well you don't have problem with USB port, but with a single USB device. Right?

  • Satellite M70-309 - problem with touchpad

    Hello

    I have a problem with the touchpad of my laptop. When the laptop is charging, touchpad not working properly but if I unplug it work.

    What is the problem? I don't understand...

    I thank.

    Hmm when did you notice this problem?
    Since the first day of purchase?

    I'm not very well if it could be a software problem, but of course, you could try to update the driver for the touchpad to ensure that this problem related isn t touchpad driver m.

    If the driver update help doesn t then a hardware problem may be possible
    It is hard to say what role might be affected but a laptop computer technician could run tests and might be able to tell what's wrong.

  • Satellite M70 Wireless problem persists

    Now, I tested my wireless a few weeks with the latest drivers Intel and I also set on max PSP.
    I still sometimes have waiting periods. Especially when there are a lot of load on network bandwidth.

    How about other users? Especially users Laurent0001 and Ciyounck?

    Hi Laurent

    The same situation on my M40. The WIFI network is OK, but sometimes connection goes down for a short period.

    Interesting is that the connection works perfectly with friends Netgear router.
    It's very strange, but I assume that the Intel WiFi card is very selective with routers.

  • Satellite M70 does not work properly with external monitors

    Hello

    My Satellite M70 has problems with a couple of monitors and projectors.

    When I connect to another manufacturer (model AL1721) monitor, the screen remains black, if I connect to another monitor manufacturers (model AL1716) everything works fine.
    If I connect a projector there also is a black screen.

    At first everything worked fine, I had a monitor AL1721 who worked, and 1 day it no longer works. I reinstalled windows, updated video card drivers, but it still does not work.
    anyone an idea why?

    Hello

    How do you connect the monitors and the projector? with an analog or a digital (with adapter) cable to the screen?

    Another question: when you connect your AL1721/Beamer and turn on the machine, you can see the Toshiba logo or something else. Is the error just that occur in windows or the "DOS" screen, too?

    BTW. have you reinstalled with recovery or separated from an original disc of Microsoft windows and the drivers you have installed?

    Questions about the question that could be answered by your help me to help you. ;)

    Welcome them

  • Satellite M70 148 Java3D - ATI graphic display problem

    I work with Java3D for school and I can't display graphics 3D on my laptop.

    My classmates also have these problems and they all work with ATI card.

    We tried to download the latest drivers from ATI video card, but I get a "missing. INF file"error...

    Someone PLZ help me? !

    Here are my specs:
    Laptop: Satellite M70 148
    OS: Windows XP Home Edition
    Video card: ATI Mobility X 700

    Hello

    Check all the settings and restrictions on your virtual JAVA machine. Check please the settings in the Java Control Panel. Talking with your teacher.

    your device must be preinstalled with Toshiba recovery image

  • Strange problem with display on Satellite M70-200

    I have Toshiba Satellite M70-200.

    When I turn once is not display and once it appears for a few seconds and he return not display anything and not finish this early...

    Help me please.

    Sorry, but I'm not sure I understand you.
    Can you explain more what what exactly?

Maybe you are looking for