Satellite M70 does ' t shotdown or start up

Similar Questions

• Satellite M70 does not work properly with external monitors

  Hello

  My Satellite M70 has problems with a couple of monitors and projectors.

  When I connect to another manufacturer (model AL1721) monitor, the screen remains black, if I connect to another monitor manufacturers (model AL1716) everything works fine.
  If I connect a projector there also is a black screen.

  At first everything worked fine, I had a monitor AL1721 who worked, and 1 day it no longer works. I reinstalled windows, updated video card drivers, but it still does not work.
  anyone an idea why?

  Hello

  How do you connect the monitors and the projector? with an analog or a digital (with adapter) cable to the screen?

  Another question: when you connect your AL1721/Beamer and turn on the machine, you can see the Toshiba logo or something else. Is the error just that occur in windows or the "DOS" screen, too?

  BTW. have you reinstalled with recovery or separated from an original disc of Microsoft windows and the drivers you have installed?

  Questions about the question that could be answered by your help me to help you. ;)

  Welcome them

• Satellite M70 does not start without AC - 85% battery

  Hello

  Please can someone help & advice?

  Laptop the next day decides to not not start/start on battery, will begin only when plugged in AC.
  When light upwards and the battery performance indicates the load and sits on 85%.
  Have removed battery & started without battery in - all fine.

  Have you tried the update of WOOD - get error "incorrect ROM size?
  Any suggestions?

  Regarding the error message:
  > Tried the update of Dungeon WOOD get error incorrect ROM size?

  Check this doc from Toshiba:
  [I always get an error message: the size of the ROM file is incorrect. | http://APS2.Toshiba-tro.de/KB0/TSB59014X0000R01.htm]
  This error peacekeepers because the BIOS file was not properly extract

  With regard to the issue of the battery:
  I think that the new battery is required

  Welcome them

• Energy saving by satellite M70 does not work properly

  The question is who also if I put on turn off the hard disk media option, after 2 minutes, that the hard drive stops working until I do something like change the page or use some programs. Is this a bug in the utility of Toshiba?

  Hello

  Sorry, but your comment is a little confuse.
  You can set the HDD OFF power at different stages.
  This function allows to reduce the power consumption of your PC by stopping the rotation of hard drive, provided that data are NOT being read from or written to the hard drive

  You can also use the stand mode. This function must be activated and the time must be set. The laptop comes in stand mode if you do not use the laptop several minutes or hours. It depends on the setting of the time.

• Satellite M70 - 181:How to unlock the keyboard?

  Hello

  My laptop Satellite M70 does not accept any input key when Windows has started. I suppose some kind of keyboard lock was accidentally activated. Anyone know how to unlock the keyboard?

  Thank you!
  Andreas

  Post edited by: Andreas_7

  Hello

  Check if the LED under the F10 or / and F11 keys lights.
  If yes then disable this feature with the FN + F10 or + F11 key combination

• How can I disable "SATA" option in the BIOS PHOENIX Satellite M70

  My laptop is toshiba satellite M70
  He has PHOENIX bios
  is there any FLASH ACPI for this Bios for me to set the property as DISABLED SATA?
  OR I can DISABLE this property is the current BIOS?
  Thank you very much...

  Satellite M70 does not support this feature in the BIOS!
  This means that you will not be able to disable the SATA feature!

  As Akuma, you need to install the SATA driver first.
  You can do this by using the USB external floppy drive or you will create the new CD of Win XP and will include the SATA driver using the free tool called nLite.

  So if you don t have an external USB FDD drive, you can use nLite.

  Search here in the forum for nLite and how to include the SATA drivers.
  There are a lot of announcement about this procedure.

  Good bye

• Satellite M70 - cooling fan does not start

  Hello.

  I recently got a little work Satellite M70 - CL1 to a friend. Everything works, but the cooling system is malfunctioning. Fan made ramp-up at the start, but then it does nothing. I tried the XP system installed inside, and ubuntu 10.10 does not seem that the fan is running. My friend said the fan strikes, but at the moment he does, too little too late and the system freezes due to overheating. He managed to stay alive for 20 minutes on his own cooling power.

  Any suggestions on what's wrong? Maybe it's the temperature probe that is defective?

  Hey,.

  Of course, it's not always easy to tell what the exact reason is on this virtual path but probably dust blocks the cooling fans and so it may start t and the laptop is overheating.

  Clean the fan and the heat sink is not very complicated, because you can use the jet of compressed air to blow the dust from the cooling fans. Everything is described in this very useful Toshiba article on cleaning of your laptop:
  [How to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

• Satellite M70 - after HARD drive partitioned, the OS does not start

  Hello

  Good then this is a real doozy, and I hope that someone will help.

  I started to fix my satellite m70 girlfriends using the disc of recovery etc, everything went fantastic, the HARD disk has been erased and Windows + all software has been reinstalled.

  Then I thought it would be a good idea to use partition magic to partition the hard drive, so I chose the main hard drive and cut 10GB of it to put in place a new partition.

  I rebooted, and then after Windows restarted again completed.

  NOW, it does not charge, it says no operating system, so I tried to start with the recovery disk and all over again...

  If I click on continue (to start the recovery process), however it is said now that the "Error #1828", free space is too small.

  I'm really angry that this has happened and I just want to start over again.

  Can someone help me with this?
  I can't access the Bios either (not sure if that might help), because I don't know the password (must be a fault im not aware of).

  Help, please.

  Thank you
  SG

  I think that this is the reason why you used a tool to change the size of the partition. At best, this should be done before you install Windows and 10 GB is a little too small for Windows. You must use at least 15-20 GB for the first partition where the BONE is placed.

  To resolve this problem, you must delete all existing partitions before using the recovery disk. Therefore, you can use a Windows XP disk or something else. Just boot from it and delete all partitions. Then the recovery disk should work.
  Check it!

• Satellite M70-148 - ATI driver blocks everything in windows starts

  Hello

  Strange thing, when I start windows xp, the windows on the slider blocks

  I have a Mobility Radeon x 700 graphics card in the Satellite M70-148.
  I have seen that it is the graphics driver that gives the problem

  I have restore dvd toshiba with the same problem.
  I was on the site to download the latest driver maybe again the same problem

  I went to AMD for another driver, again the same problem.
  The only rider agreed to work is the driver of windows, but the quality is not top (max resolution 1024-768)

  In safe mode no locking

  I also upgraded the Bios without result (and I don "t want to replace the motherboard)

  An idea for the other driver for better work

  Thanks for any help

  Hi mate

  It is difficult to say what issue it could be
  You said that the graphics card a few worries and the laptop does not event after using the Toshiba recovery.

  That s weird. This means that there is something wrong with the hardware in your case perhaps the problem of graphics chip :(

  But without a hardware test it is really not easy to say what part has been affected.
  I think you should contact the technician ASP pourrait test the laptop, check the motherboard and might be able to provide more details
  Then you could decide what to do

  Welcome them

• Problem starting Satellite M70-173

  I have a problem with my laptop, since uninstalling Norton Internet security, I had a program to freeze. The only way to stop it was to maintain the power key. Since then, when I turn the machine when starting the machine to start and after about 1 sec no activity. I don't get the start-up of the screen. If I leave the laptop for several hours I can start and after a short period the computer freezes once more and I can't restart. I noticed several people reporting this kind of problem but cannot find any solution. Can anyone help?

  Thanks in advance

  Hello

  I really wonder what problems people have with laptops. I have Satellite M70-159 over one year and never noticed anything like that.

  Operating system is installed with recovery DVDs and the first thing I do after recovering is to remove Norton antivir application. Trust me I did it more than 10 times and never noticed any a? freezinga? questions. I don't know what you're doing, but if I remember well, there are two entries for Norton in Add/Remove programs.

  At first remove a? UpdateA Norton Live? and later Norton app itself. Overview you will find under http://support.toshiba-tro.de/kb0/TSB6B01NM000ER01.htm

  I don't know where you have founded a? several people reporting this kind of problem? but I can say for sure, it may not happen because of Norton. There must be something else. Maybe you deleted some other tips and startup procedure cannot be done correctly. It's really not easy to say what the problem is here.

  I recommend you to install OS using recovery delivered DVDs. When finished remove Norton as described in the document of Toshiba. I hope that everything will be OK again.

  Good luck!

• Satellite M70 - 181 - slider and escape key does not

  FN with F10 keys shows no reaction.
  Check all the drivers.
  But cursor and escape keys does not.
  Need help please

  Joe

  As far as I know, FN + F10 or FN + F11 active integrated keyboard and cursor control keys.

  Satellite M70 is a fairly old machine and I do not remember which driver may be responsible for this control. Try to reinstall the Toshiba Accessibility or FN-esse utility. Maybe this will help.

  I had M70 long ago, but I've never used this option.

• Satellite M70 will not start

  Hello
  I have a big problem with my Satellite M70. I can't pass on this laptop, by AC or battery. lamp power shines for 3 seconds and then turns off, also fan who jumps for about 3 seconds. Then it is a cell phone dead. What can I do or where the problem lies?
  who can help me?
  Dieter

  Hello Dieter

  Have you updated something on this unit (e.g. RAM)? Try removing the battery and start unit with AC adapter only. If nothing works I recommend you contact the service partner in your country as soon as possible.

  I'm not an expert, but it cannot be anything like hardware related issue and must be verified by the service. Perhaps that the CPU is not cooled properly and the temperature is too high within 3 seconds and unit just turns off.

  I guess you are from the Germany, and you can contact a service partner it. Addresses you will find under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!

• Satellite A110 - does not start

  Satellite A110 does not start on power, but the HD load no start fan display running, but in a few seconds it stops.

  Help, please

  Hi jinskywalker,

  No display?
  No beeping?
  Nothing?

  In this case, you should read this article:
  [What steps must be followed if your Toshiba laptop does not start? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=21]

• Satellite A10 - does not start correctly

  I have a Satellite A10 and I can't start even last known good configuration or in safe mode does not work and if it starts it will take much time but a blue screen appears and indicates that an error has occurred and prevent any damage on the hard disk.
  I put in the recovery cd, but I do not have the cause of xp, it is said start windows 98 but im on a xp pro I got when I bought the laptop. So, if any of it can help?

  HI Johan,.

  If you are unable to boot from your hard drive, then your only other option will be to boot from a CD-ROM.

  Most of the commercially available backup utilities (Norton Ghost, Acronis True Image, etc.) include such a bootable CD. Supplied with your laptop product recovery CD is very probably a stripped down version of Norton Ghost, which is specifically designed to format your hard drive and then restore an image of 'Phantom' of the original OEM software.

  It is quite possible for your hard drive to be damaged and have still LED lights when it is accessed. The damage might be the physical mechanism of the player, or the lining of the surface of the platters etc.. A CD bootable one of backup utilities will probably include a version of CHKDSK, you can run to test the integrity of your hard drive. Norton, for example, include a copy of Disk Doctor.

  If you have a copy of the original Windows installation CD, you can boot from that in the recovery console and try to repair what is damaged on your hard drive, assuming that the problem is that the damaged or missing files. In principle, you can use the XP Home Edition CD to do this only if the damaged files are not specific to XP Pro to which cases they will not on HE drive.

  HTH