Satellite M70: Question on registration after using the restore CD?

I have reinstalled the OS on my 70 M satellite using the restore CD and now system even once asked me to register with Microsoft and Toshiba. I've already done, so I jumped it. I just want to ask if I use the recovery CD, I have to register again with Toshiba and Microsoft, or is not necessary.

Hello

You n t need to save anything when installing Toshiba recovery image.
The Toshiba recovery image is already out.
You can register your device on the Toshiba site for more support, but this procedure has nothing to do with the recovery image record.
http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/generic_content.jsp?service=EU&ID=000000147a

Tags: Toshiba

Similar Questions

  • Satellite P500 - loop of reboot after using the Toshiba Recovery disk

    Hello

    I have a problem recovery SATELLITE P500. I did the recovery disks. It starts ok on the recovery disk and format the hard drive and copy the disks to the hard drive. Then, he begins installing windows and restarts.

    He then goes to a loop
    (1) marketing and says "Setup is preparing your computer for first use.
    (2) Toshiba banner saying please wait... Second installation may take several minutes. Pleae do not interrupt or shut down the computer!
    (3) Windows logo
    (4) close...
    (5) restarts and goes to 1)

    It would be great if someone could help me with this.

    Thank you very much
    Softari

    Hello

    I noticed the same thing on my Satellite P500, but I must say it s not a problem, it of quite normal. The computer will restart several times (10 times or more) to complete the installation.

    You know that a lot of drivers/tools will be installed and some restart is required to configure everything properly.

    So don t interrupt the installation of recovery, just wait a little longer and a coffee. Everything is done automatically and your laptop is reinstalled with the factory settings. :)

  • Does not start after using the recovery Toshiba Tecra M5 - disk

    After using the restore on my Tecra M5 CD, the computer cannot even start!

    What to do in this situation?

    Hi jbdoktor,

    Does that mean exactly?
    Now, what happens if you start the computer?

    Sorry, but without this information it is difficult to help you. Maybe you should try the recovery again disk

  • Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

    Stupid question CS6. How can I get rid of my experience after using the quick selection tool?

    The best way would be to make sure that your layer is not a background layer: click the lock icon in this case. Then click the icon at the bottom of the layer panel layer mask. This will create a mask that you can refine and not be destructive.

  • Should I update all the files from the Toshiba site after using the recovery CD

    I just used my recovery CD and update the Windows Update System.

    The question is: should I update all files in the files on this site download section as well?

    Usually after using the Toshiba Recovery CD everything should works and works correctly
    To my knowledge from time to time Toshiba has released new version of some tools or drivers. For example the BT stack will be developed all the time.
    But I think that if you have any problems with your system and peripherals, then you don't need t to update anything.
    Small is my opinion...

  • Satellite A100-906: Express player media use the reinstallation of the operating system

    Hello

    I use a Toshiba Satellite A100-906. I did NOT know about what express Media Player recovery cd's and I've never used it. But now I want to know what's the point of use.

    In any case I had to format my laptop and I have used the recovery cd. So now I've read that if I want to run the express media player I must first of all, insert the express media player cd stop button of my laptop and then use cd/dvd to start it.

    The problem is that I find in win xp with a Windows Media Player. Something go wrong with the format (using the recovery cd)? I had to first install the express media player? and then format and reinstall xp?

    If that's the problem, I, at this stage, to be able to install express media player without losing my data? I expect an answer. I hope you'll forgive my ignorance :).

    Best regards
    Harris

    P.S. when I boot from the media player recovery cd express I get three options 1) crash installation 2) uninstall 3) delete all partitions. So did I express media player installed?

    Hello

    So you're a bit confused. Am I wrong?
    If you want to start the Express media player you n t need to insert the CD of express media player!
    Express media player must be installed on the HARD drive!

    You have recovered the laptop with your recovery CD Toshiba but didn't install the Express media player since the EMP CD!
    This is false.

    Usually the Media Express Recovery CD drive must be run before performing the recovery from the recovery DVD-ROM products.
    Cannot install the Express media player after using the Toshiba Recovery CD!

    So first to run the CD of Express media player and then run the restore CD!

    If you wish, you can consult this useful document of Toshiba providing education
    How to find a laptop Expert Mode with 2 Partitions and Express Media Player?
    http://support.toshiba-tro.de/KB0/TSB58014O0008R01.htm

    hope I could help a little

  • XP unbootable after using the recovery disk, but Linux will be

    I have a laptop Toshiba Satellite L25-S1216. I had some bad virus, so I used the TOSHIBA Windows XP Recovery and Applications/drivers DVD provided with the computer when I bought it. I had used this once recovery DVDs or two before without problem, the last time was about 1 year ago. The recovery process seems to be okay: he seemed to format the disk and copy the files from the DVD to the hard drive. He copied about 5 600 MB hard disk for about 10 minutes and 40 seconds.

    But the computer does not boot from the hard drive after using the recovery DVD. I tried the process several times and it does not start in Windows XP on the hard drive. I checked the settings in the BIOs to make sure he can start, but it does not start in Windows XP on the hard drive. All I get is a white screen with a horizontal blinking cursor, nothing else, no error message, nothing.

    Then I got a copy of Linux (Fedora 14 live) on a CD and started on the computer from the CD R - W, DVD R drive. Then I loaded Fedora 14 hard disk. , I can boot into Linux (Fedora 14) of the fine to hard drive. In fact I use Linux to write this e-mail now. I also see the files that have been copied from the DVD recovery Windows XP on the hard drive, when I'm on Linux.

    Does someone has an idea what could be the problem? The only difference between now and the last time I used the recovery about DVDs a year, is that I had to replace it internal CD R - W, DVD R drive, as a mechanical part was broken. I replaced it with the same exact model (TS-L462) who was in the computer when I got it is new.

    Thank you

    B.

    Not sure how a restore xp cd may give you the option to start the recovery console.

    With a regular xp, recovery cd / repair console is launched all simply by selecting the 'r' on the configuration screen.  Subsequently, the recovery console opens and takes you to the drive prompt.

    In any case, what I suggest is to execute commands to drive at the command prompt that could make the drive bootable again.

    the commands are:

    Chkdsk /r

    Fixboot

    bootcfg /rebuild

    FIXMBR

    Normally, fixmbr running on a laptop is not recommended because it disables the hidden partition that contains the files for recovery.  Then re-enable it manually, is not easy. But since you have your on dvd, then you are lucky.

  • Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please...

    Acrobat CC - lost Scripture I posted after using the fill & sign. Help, please... It happened after I merged the two files...

    Hi mannys14196422,

    This problem has been resolved in the last update. Go help--> Check for Updates.

    Please let us know if you still face the question.

    Kind regards

    Sandeep

  • My Aspire one 753 does not connect to WIFI after using the Recovery Manager.

    After using the recovery on my Aspire one 753 inbuild Manager my phone doesn't conect to wireless internet. I think the problem has something to do with the drivers, but I'm not sure. need help ASAP

    I used the live usb of ubuntu when I discovered that my network card was acutally one of Intel wifi card. https://downloadcenter.intel.com/Detail_Desc.aspx?DwnldID=24217&lang=eng&ProdId=3316. Thank you very much for your support on the issue

  • is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

    Is it possible to save the Office XP for multiple monitors and restore after using the laptop in mobile mode?

    Hi Kenelms,

    You can follow this link & check if it helps.

    HOW to: Set up hardware profiles for laptop computers in Windows XP

    Hope the helps of information.

    Please post back and we do know.

  • Background layer unlocks and becomes the normal "no flat" layer after using the crop tool in PS CC 2015.1 (a different behavior for older versions of PS)

    Hi all

    I found that it is more difficult to explain than I thought

    I don't like the new behavior in the latest version of Photoshop (CC 2015.1) regarding the way in which the background layers automatically unlock and convert to regular layers after using the crop tool. It's completely different to how things worked in previous versions, where a background layer remained in locked state flattened after using the crop tool.

    I get a LOT of images and this change has added an extra step to each image that I harvest, because I flatten the layers after cropping before saving the image. I looked through the preferences but cannot find a way to change this new behavior. Am I missing something?

    Thanks in advance for your help

    See if checking Delete the cropped Pixels in the tool options makes a difference.

  • I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

    I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do


    Please see the links below.

    Also, make sure you use the right adobe ID to log in.

    Hope this will help you.

    Kind regards

    Hervé Khare

  • I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law is there a

    I use the trial version of CS5 version, two years ago. I was deleted from my computer after using the program. Now, once again I want to install a trial version of CS5 on my computer. I want to improve my program information. That copyright law are there downsides to the wonder of Adobe?

    Hello

    Please Download CS5 products

    But you can only use it as a trial for a limited time unless you do not provide a serial number to activate the product.

    Kind regards

    Sheena

  • Acrobat reader crashes after using the send a file feature

    I use 32 bit Windows 7 with all updates installed and Adobe Reader 11.0.11. After using the files of a PDF acrobat reader email feature send it crashes. The window is not frozen, but when I click on the X to close the document, nothing happens. I see the button push, but the window remains open. File-> exit does not work either. I can't open another PDF until I use taks Manager to close the Adobe Reader software.

    I tried to uninstall and reinstall drive, I created a new Windows user profile nothing helps. This happens on any PDF file I have open and click send a file.

    Disable protected mode solved the problem.

  • Spit Lightroom 4.3 when using the brush after using the red eye tool

    I bought Lightroom a few days ago. I was traveling so I didn't have the time to 4.3.

    The version shipped with the disk (4.1) worked like a dream. I downloaded 4.3 yesterday and I couldn't be sadder. First of all, I noticed that it cause the 'root' to use more CPU, which means that it does not use the CPU for Lightroom itself. More demand is usually and significantly slower than the original one.

    Today, I used the red eyes for the first time, and I can't just brush top unless it crashes! It is simply impossible. I rebooted. Upgrade my Mac OS 10.7.5...  No use. I even uninstalled and reinstalled again. I was forced to do all my first edit in there usinf the brush, then use the tool red eyes as the last step. But any time that I commit the brush after using the red eye tool, it crashes instantly

    It seems something funny on your establishment for sure that there is not a wide spread thing.

    What exactly is your establishment and where are the various files located - catalogue, images, etc.

Maybe you are looking for

  • Deletion of the history of Siri

    How to remove history of Siri questions you have asked or do you need to? The iPhone automatically removes Siri questions? Is there something in the settings to remove the questions and items and everything you've looked up with Siri?

  • Is there a way to put the system buttons in the tab bar?

    I want to get the most out of the size of my screen, so I want the buttons triple system (minimize, maximize and close) to go even when I am running FF on my tab bar - windowed. Firefox (v37.0.2 on Win7) does this automatically when it is enlarged, s

  • How to install Sata on Satellite M70-340?

    My version of WinXP Pro does not see the HARD drive in sata mode. I read on the chipset and supports sata and my HARD drive. How can I install I do windows see my HARD drive in SATA mode. thanx

  • GPIB error message (VISA?) when you access a power meter HP E4419B (double channel)

    Hello I used a GPIB-USB-B adapter to access the E4419B meter, via a Calibration of IFR application software. The required initial standard test equipment is an E4418B. During the initialization process, there is always a message: "Initialization erro

  • TouchSmart IQ810 gel/bluescreen errors

    I have an IQ810 UK Touchsmart, I've had three or four years. For the last year or so there bluescreened every so often, several times a month, increasing over time. I upgraded from Vista to Win7 and installed an update of NVidia driver some time ago,