Satellite NB10t-A-101 - USB works after installed Ubuntu 14.04

Similar Questions

• Re: Satellite A300 - fan does not work after installing Win7

  Hello.

  I did a new install of Win 7 pro 64-bit, and after it does not my fan, not at the start or in Windows. To check if it the fan itself was broken I re-installed Vista instead and the fan worked again!
  Installed new Win 7 but now it's silent :( I checked in the BIOS (latest version 1.80) but I couldn't find any option here. Am I missing a driver or something?

  My Satellite canned extinguishing because of this, so I would really appreciate help :)

  Best regards / Ocke

  Post edited by: Ocke

  Hmmmm... really strange. I use Win7 32 bit on my Satellite A300-1LI and it works perfectly.
  Maybe a stupid question now, but have you tried to use the 32 bit version?

  You have also installed all the Toshiba drivers Toshiba value added package (includes the Toshiba power saver tool)?

• Satellite L305D - Touchpad does not work after installing Windows 7

  I had recently installed Windows7 32 Bit there is almost a week on my Toshiba Satellite L305D-S5934, and now the tablet to the PC no longer works.

  I was reduced to using an optical mouse on my computer. I've updated all my drivers and firmware etc on the windows update software and still I have not been unable to get the touchpad working. Windows 7 had installed the driver of synaptic for the touchpad pointing stick, but im guessing that he needs a special Tosiba firmware to recognize the touchpad for this model. What should I do to get the touchpad working again?

  Here are the specs of my model:

  PC x 86 ACPI
  64-bit AMD Turion X 2 processor
  ATI Radeon 3100 graphics card
  Synaptics PS/2 Port TouchPad

  I installed Windows 7 on my Satellite Pro P300 and touchpad works properly. The OS is naked and I didn't install any additional touchpad driver.

• Satellite P300 - Microphone is not working after installing Windows 7

  Hello

  I recently did a clean install of Windows 7 on my Satellite P300. The microphone has been fine with Vista but does not currently work with Windows 7.
  I tried to go to the sound section and it does not list the casting Mike - just struggling. Can anyone help?

  Thank you
  James

  Hello

  Maybe you didn't install the driver for the microphone? Therefore, you will need to install the driver for the webcam, because the microphone is a part of it. You can get it here:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  After that, it should be possible to use the internal mic.

  By the way: internal what application you are using for the microphone? Skype or something?

• Satellite A200 - Webcam no longer works after installing Win7 32 bit

  I have a Toshiba Satellite A200-237 and I formatted my hard drive and installed Windows 7 Ultimate 32 bit once.
  I also installed software Toshiba site (camsoft-20070810084209) of this 1.7 version camera assistant...
  I start the program, but when I want to start the cam I get an error with the message of start the cam. I don't really understand the problem and when I loop upward the CAM system is unknown?
  What can be the problem? I have different version of CASES if so where can finance this?

  On my Satellite A300 (supplied with Vista) I installed the latest version designed for Satellite A500 (Vista version) and it works perfectly.
  I don't know if you can use it on your Satellite A200 but you can try it.

  You can find HERE for your model of laptop Win7 CASE
  CASE I used you can find HERE

  Try it. If it does not let us know.

• Satellite A100-011 - Bluetooth not working after installing Windows 7

  Hi, I have a Satellite A100 - 011 (PSAARE) and I tried to install windows 7 on it.

  I used the installer of the software of toshiba for windows 7, and in Device Manager, all of the devices seem to be properly installed. (There is a disabled person, or an unknown device). However, I can't have my bluetooth appears or use it. I tried to install the 3.00 Vista bluetooth stack, but it didn't work. Why isn't my bluetooth device and function appear anywhere in windows 7? Someone at - it had a similar problem?

  Let me add that the WiFi is working normally.

  Hey,.

  I m no owner of the Satellite A100 but I think you need more recent Bluetooth software and drivers for Windows 7 to Vista place

  Check Toshiba Bluetooth portal for the latest versions:
  http://APS2.toshiba-tro.de/Bluetooth/

• Satellite P200 - Microphone has stopped working after installing Windows 7

  My Satellite P200 came with Vista Ultimate, the mic has worked for a few months, all of a sudden it stopped. I decided to install Windows 7, but the microphone still does not work.
  Any ideas anyone?

  I use this laptop for skpe my people a lot. I can use an external mic very well, but really want my only integrated works again.

  Hey Buddy,

  Sounds like there of something wrong with your installation of Windows 7 so the microphone doesn t work anymore...

  I recommend updating the driver of the webcam, because the microphone is a part of it. You can find updates driver here:
  http://EU.computers.Toshiba-Europe.com

  I put t know what Satellite P200 you have exactly, but if you can t find a driver Windows 7 for webcam, choose another model which is fully Windows 7 taken in charge, e.g. by Satellite P300.

• Satellite A200-13O camera not working after installing XP

  Hello
  I have toshiba Satellite A200-13O, from the first day that the unit had problems...

  I changed the OS of XP and I installed all the drivers.
  When the camera is working its totally black, and it keeps being disconnected and I get the msg "this device can perform faster..." »
  I don't really understand the problem and I don't really have the time to go to the workshop!

  Hello
  > I found this:
  > http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=24169&messageID=88745
  >
  > Here is the solution to your problem
  > http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?service=UK&from=search_service_options&FID = TIU00000038fc

  This is another assignment, and I think that should help you with your problem.
  If this isn't the case, giving just a few comments.

  Greetings

• Satellite A300: Light does not work after installing Win 7

  Hello

  I've recently updated my notebook from windows vista to windows 7.
  My touch buttons work perfectly and the light up for a second when I touch them.

  Only, I can not find how do I turn on the lights of the touch buttons all the time.
  Sombody can you please tell me how to do this.

  Thank you

  Hello

  Have you installed the additional package of value VAP for Win 7?

  Value added package controls Toshiba command buttons and this will help you solve your problem

  In addition, you must know that you can turn on and off lighting in the BIOS.

  Check too!

• Satellite Pro L20 - LAN not working after install OS re -

  Recently, I replaced my hard drive and I used the drive recovery product etc.

  WXP loaded perfectly and now my wired LAN doesn't seem to work. What it gives me limited connectivity or none.
  I tried to uninstall and reinstall the drivers, manually enter the IP settings and still nothing will work.

  I was wondering if anyone else has had this problem before and that he could offer me any advice.

  Thanks in advance

  M8KWR

  Maybe you should check your settings to your router. Maybe some bad DNS, subnet mask, etc.

  Already checked the cable? Maybe the cable is defective. Any overlap it with another cable.

  Would like to get feedback on your part.
  Also what operating system are you using?

  Greetings

• Satellite L40 - 14N is not working after installing Vista SP1

  Greetings

  After Vista with SP1 update, the computer became non functional all the lights blink but not display.
  Any ideas people.

  Concerning

  Hello Mike

  Sorry, but your description of the problem does not say much. Black screen on startup, after wake from sleep mode or hibernation mode?

  Please give us more information.

• Installation of Ubuntu 14.04 on Satellite NB10t-A-101 does not work

  Hello world

  Sorry for my English: it is not my mother tongue. I'll try to explain my problem.

  I would like to install Ubuntu 14.04 on my computer (Toshiba Satellite NB10t-A-101), but it does not work.

  I boot on my USB (made with RUFUS), but it works once for each five times.

  After you install the operating system, when I restart the system, the computer does not find an operating system (I precise that I already check the EFI BIOS and disable secure boot)

  How to install Ubuntu?

  Hello

  This series of portable was equipped with a processor Intel Celeron 2810 n and this CPU belongs to the new Intel BayTrail platform.

  The * Intel deposit path * allows only the installation and utilization of systems capable of UEFI as Win 8 or 8.1 Win

• Re: Satellite NB10T-A-101 - cannot boot from USB key

  Hello

  I bought a new Toshiba Satellite NB10T-A-101 and want to improve performance by changing the HDD with a SSD and install windows Pro 8.1.

  However, I am unable to boot from USB, it always mention:
  + Reboot and select proper boot device or insert boot media in selected boot device and press a key. +

  I already disabled secure, used 5 + usb startup different sticks (work fine on other laptops).

  Can you please tell me what the approach is to change the HARD drive and then boot from a USB bootable (UEFI).

  Thank you.

  Hello

  Laptop Satellite NB10T-A-101 was equipped with an Intel CPU 2810 n which is part of the new Intel Bay Trail-M platform.

  This new technology Intel Bay Trail allows installation of UEFI capable systems:
  Win 8 or 8.1 Win

  Just a few questions:
  Have you already changed the HARD drive to SSD drive?
  If so, the new SSD is recognized in the BIOS?
  Have you tried to boot from the USB flash memory stick 8.1 Win until you changed your SSD drive?

• Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

  I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

  (1) turning off SecureBoot (which I did)
  (2) putting USB at the top of the list of starting the computer.

  But it does not work.

  I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

  Hello

  Great that you are using Linux on your PC!

  You mention that you have disabled the secure boot.
  It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

  Most of the distros must support UEFI but that can't be true for each of them.
  If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
  If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

  Another clue could be to take the USB key and try to start another PC from him.
  Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

  If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

  I hope this helps!

  Tom BR

• Satellite NB10T-A-101 - mouse pad does not work

  I have a touch screen for Toshiba Satellite NB10T-A-101, the touch screen works very well but I use mostly the mouse pad I find using the slider easier.

  But recently my guarded cursor freezing for a second or two and then to spend once again, but now the mouse pad seems not working with the left and right click buttons work but not the touchpad.

  I made sure the touchpad is enabled in the mouse settings, so I don't really know what to do now.
  Any suggestions would be greatly appreciated
  Thank you

  Hello

  Have Hmm you also checked the FN + F5 key combination?
  This would enable and disable the touchpad as well.

  But from my point of view, it would be possible that the touchpad module is malfunctioning.
  I m thinking about the hardware malfunction because the touchpad buttons work and just touch the touch work area module doesn't correctly.

  Usually, if the touchpad would be handicapped by any software, both; as well as the touch buttons does not work.