Satellite NB10T - A is blocked during installation of Windows 10 every time!

Similar Questions

• WU is blocked during installation of updates - but does not freeze

  Hello

  I recently installed Windows 7 Professional on my new PC. It worked well; After that, I installed mainboard and video drivers and then some games.

  Then I noticed that I was not activated Windows Update during installation, so I started the update manually. Download worked, but the installer is stuck to the update 10/59. I then tried to cancel the update (the "Cancel" button was clickable, then the program do not freeze) but nothing happened. So I rebooted the computer...

  I tried to update again, but WU is now stuck at 8/59. I don't know what to do; There is no error message or anything. The only way to cancel the update is by restarting the PC.

  FYI: I waited like 2 or 3 hours, but WU did not progress.

  Thank you very much for the help!

  derKeeper

  Please go here, download and Save the Fixit on this page. Ignore the advanced system like the Fixit applies to Windows 7
  How to reset the Windows Update components

  Next, configure the boot system to eliminate interference of software 3rd party-
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  NOTE:  Start-up mode minimum state all the 3rd party firewalls will be disabled. Make sure that the native firewall of Windows 7 is now on by clicking on the start ORB in the field type search programs and files in the firewall .
  Under Control Panel , click on the link to check the status of the firewall .
  Alternatively, simply unplug the system from the internet at the moment.

  Run MicrosoftFixit50202.msi and wait until it has finished running, then Cancel the Clean boot steps and restart the system.
  If you are disconnected from the internet, reconnect the system now.

  When the updates that have not installed are available again, suggests that install you them in groups not exceeding 10. Yes, it will take longer than installing them at the same time, but if a problem is caused by the updates you can identify that one is causing it by uninstalling the one at a time.

  Expert MowGreen Windows IT Pro - consumer safety

• Re: Satellite T140-17F - some problems during installation

  I just to the @! @££ ! ... et f » @ » !!! @ What a pice of useless @! £@!
  Fees out of the stores and it is constant restarts? OMG
  I'll never ever ever ever ever ever ever a Toshiba agen.

  After all the 20 restars uhm, I got fed up and used Ctrl alt del which has halted the prosess for awhile...
  Then a new list of issues got smaced in my face...

  1: he can not connect wireless internett it dosent even try to look for him.

  2: the "any implementation for the first period of use" (including the constant loop samekh) starts EVERY time I turn on the pc.
  (Even after I KILLED all the associated toshiba estimé on the pc.)

  3. what should I do now?
  It of not like I can completely erase and then I have to buy a usb cd rom... and NOT! @!! @# @ I'd throw rather the @! "@ pc in the trash.

  Hi mate

  First of all it of not necessary to go bananas here in the forum.
  If you want to discuss issues, then you can do this, but the right way

  Back to your question;

  > After about 20 restars uh, I got fed up and used Ctrl alt del which has interrupted the process for a while...
  Yes, the Toshiba laptop are pre-installed with a picture of Toshiba and the installer may takes a little longer and needs a few reboots.

  > 1: he can not connect wireless internett it dosent even try to look for him.
  Perhaps, you should first check the BIOS if the WiFi is enabled.
  Then check Fn + F8, that should enable the WLan under Windows OS!
  The WiFi driver update could be useful too.

  > 2: the "any implementation for the first period of use" (including the constant loop samekh) starts EVERY time I turn on the pc. (Even after I KILLED all the associated toshiba estimé on the pc.)
  As I said above, the configuration may take a while, but after the installation process, everything should work as well if this is not the case, then you should try to reinstall this device try again HARD drive recovery that does not need the CD.
  Turn on the device, press F8 and choose fix my computer. Then select Toshiba HDD recovery!

  Good luck & you always be welcome in the forum...

• Patch for KB2545850 hangs during installation on Windows Server 2008 R2 Standard 64-bit

  Hello

  I have a server with the issue detailed in KB2545850.  I downloaded the fix Fix370193 (https://support.microsoft.com/en-us/hotfix/kbhotfix?kbnum=2545850&kbln=en-us) and tried to install it but it seems to just hang during installation.

  I tried several times and it fails every time.  No errors are displayed or saved, he's right there with the display of progress bar.  The Cancel button does not cancel.

  Restart the server results it starts successfully and I had to go back to a snapshot.

  I tried to let the software update apply for 16 hours with no luck.  Someone has seen something like this before?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Even if I get correct correct product ID, it says "product ID you entered is invalid" during installation of Windows XP

  Hello

  I'm having trouble installing Windows XP on my laptop. This is not the first time I install windows, but this time I'm stuck in the middle.
  My laptop was having Windows XP to start. After that, I installed windows 7 in that.
  Now I decided to install windows XP in this (please don't ask why). To do this, I booted the laptop computer from the windows XP installation CD, then I deleted all existing partitions on the hard drive and created fresh new partitions.  The implementation of process went well until what I enter the product key.
  Even if I enter the correct product ID, it shows "the product Id you entered is not valid.
  I used Windows XP is OEM software and came up with the new PC and already also two or three times that I had installed the same window in the same machine. This one time i'm stuck.
  Any kind of help is much appreciated...

  Yes... I'm pretty sure that I got the correct product key.

  By the way the problem is solved now... The problem was on the installation CD. After repeated attempts failed installations, I thought to give a try by changing the installation CD. During the installation of the different installation CD, it worked like a charm. The product ID that wasn't working...
  in any case thanks a lot 'J W Stuart"for your answer.

• Stop: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000 during installation of Windows XP.

  Original title: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000

  Stop: 0 x 00000050 (0xf05c371c, 0x00000000, 0x804e70dd, 0x00000000

  Can someone help with this error.

  I have a model Assembly, so that the installer of Windows XP (sp3), this error occurs.

  Hi Sameer,

  You can follow this link & check if the problem persists:

  "Stop 0x0000008e error code" or "Stop 0 x 00000050 (PAGE_FAULT_IN_NON_PAGED_AREA) error code" error during the installation of Windows XP

  Hope the helps of information.

• Blue screen: 0x7e during installation of windows xp

  original title: blue screen of death during the installation of windows xp

  I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

  It's basically my blue screen message

  problem detected windows stops to prevent damage of the model
  Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
  try changing video cards

  control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
  safe mode to remove or disable components

  STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
  PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

  "superbuddha" wrote in message News: * e-mail address is removed from the privacy * .com...

  I just bought a motherboard ASUS p5g41t-mlx with a Pentium E5400 2.7 GHz dual core and a hard drive when booting with the windows xp cd in, it goes through the initial configuration and is preparing to restart the computer when I get a blue screen (this is before we get to make a partition)

  It's basically my blue screen message

  problem detected windows stops to prevent damage of the model
  Check for sufficient disk space. If a driver is identified in the stop message, disable it or check updates,
  try changing video cards

  control the bios upgrade. Disable the bios memory options such as implementing caching or shading. Start in
  safe mode to remove or disable components

  STOP: OXOOOOOO7E (0xc0000005, 0xf748e0bf, oxf78da208, 0xf78d9f08)
  PCI.sys - address f748e0bf base at f7487000, DateStamp 3b7d855c

  Have you installed the drivers SATA asks to press F6 to install drivers from floppy drive?  Assuming you have this type of "new HDD" with your new motherboard.  (small cable from motherboard to the drive instead of wide ribbon cable.)
   
  You may need to go into the bios of the computer to IDE mode to install the operating system.  Once installed, you can install the SATA drivers and then move into the bios SATA mode for the HARD disk controller.

• Fatal error during installation of Windows Live Writer

  A few days ago MSN prompted me to update my MSN to the latest version. I did and after the update, I noticed that I could not install Live Writer. I tried many times and I'm still stuck.

  I received an error message stating:

  "Fatal error during installation. .

  Please close all other open programs, and then try again. It looks like a another program prevents the installer to work. HR:0 x 80070643 "

  Help, please. Thank you.

  Hello twmagee,

  Since you have problems with Windows Live Writer, it is best to post in the forums of Windows Live Writer.
  Click here for a link to their forum.

  They have experts and available solutions in their forums.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error during installation of Windows 8 "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. »

  Original title: I can't access my pc please help!

  I recently download windows 8 ASSESSMENT and not this message keeps popping up whenever I turn on my pc.

  The computer restarted unexpectedly or encountered an unexpected
  error. Windows Setup cannot continue. To install Windows, click
  'OK' to restart the computer, and then restart the installation.

  I click OK and then it restarted my PC and came with The Windows 8 boot-up the top screen and then the same message keeps popping up.
  I need help really bad.

  Kind regards

  Darius Oisin Reyes

  Hi, Mary

  I'm using the Enterprise version that it froze during installation, so I waited around 9-10 Minutes still nothing
  so I started keys at random because I was waiting for a long time then restarted my PC and now I can't start my pc.

  >:-( >:-( >:-( >:-(

  Boot from the Windows 8 DVD or USB media that you created
  Click Install now
  Accept the license agreement
  When the option is displayed to select a type of installation, click (Custom advanced)

  Select the disk partition where you want to install Windows 8 click Next.

  You will receive the following warning:

  The partition you have selected may contain files from a previous Installation of Windows. If so, these files and folders will be moved to a folder named Windows.old. You will be able to access the information in Windows.old, but you will be able to use your previous version of Windows.

  (At all costs, do NOT click on anything in Format, deletion or Partition name.) So even do a custom installation, your personal files are still kept. Click OK

  The installation program will now begin installation. During installation, your computer will be restarted several times.

  Once the installation is complete, you can complete the Out of Box experience as the choice of your laptop, create a username, password, your time zone. You can then proceed to download the latest updates for Windows and reinstall your applications and drivers.

  You can then retrieve your personal files from the Windows.old folder and reinstall all of your applications and drivers.

  http://notebooks.com/2010/11/09/how-to-recover-documents-music-and-email-after-upgrading-with-the-Windows-old-folder/

• Error during installation of Windows 8

  I get this during the installation of Windows 8 in ESXi.  My ISO is bad?  Please see attached.

  I've seen many cases like this recently and it has something to do with the Download Manager, truncating the links and corrupt the image... Try to download the image again, but make a direct download instead of using the MIcrosoft Download Manager.

• Qosmio G30 - No. HDD recognized during installation of Windows 7

  HY, I tried to install win 7 on my Toshiba Qosmio G but after running the installer of windows 7, it does not find the drives to install on. My Qosmio has 2 discs. In the BIOS, they are marked as SATA (I can't change this setting) and the first to RAID0 and the second JBOS.

  When you run the installation from my XP environment, I get the message that the AHCI driver is not installed. I downloaded the latest driver for storage of matrix from Intel and upload it in the setup of Windows 7, but it still does not recognize my discs. See a suggestion or an answer to my problem?

  Of course, I installed the latest version of the BIOS... it's from 2008-09. Intel matrix storage drivers where very recent 17/07/2009. But according to the website of Microsoft AHCI and SATA drivers must be included in the installation of Windows in any case.

  PS the version that I'm trying to install is RC build 7100

  Thanks for some comments,
  Bert

  Hello

  First of all, you should tell us what model Qosmio you exactly. There are many different Qosmio models on the market.

  To me it sounds like that, you simply use the wrong driver AHCI/RAID. If your Qosmio is equipped with a RAID controller you need other drivers and not the Intel Storage Manager. To install Windows in this case, you have RAID drivers they belongs to the RAID controller.

  As said Akuma search site Web from Toshiba RAID drivers:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

• hard drive is not recognized during installation of window

  Hi all

  I recently had some problems with my computer so I decided to erase and install a new OS on it. Initially I had window on my main hard drive, but that is old and broken so I who throw in the trash, and my secondary hard drive (Seagate Barracuda 7200.12) now will be my main for this installation of Windows vista x 64.
  Problem: when I get to the part in order to select the player for window to install on, window does not show that the disc is read, and the driver must be installed.
  I've never had this problem before. so I went into the bios when booting and bios, I see this window is grateful for my hard drive, but for some reason, it does not show when I do installation...
  Help, please...
  Thanks in advance

  Hi tuanhuynh,

  It seems that the Serial ATA driver could not be installed on your computer.

  See the following link and install the Serial ATA driver.

  Install or remove a hard drive

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=200991

  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=212667&NewLang=en

  If you have trouble with the Serial ATA driver installation then I suggest you to contact the manufacturer of the system for further assistance.

• Last download software HP C6280 hangs during installation on Windows 7

  Someone else has the same problem?

  I wanted to get the functions scanner works again after the upgrade to Windows 7 from XP and the original installation CD no longer works.

  I downloaded the latest version of the software driver from HP's Support web site.

  Whenever I try to install it it gets in what concerns the "application of updates" and the program is a hardware failure and disappears with no other message!

  I have tried all the option to disable antivirus, firewall, etc., but still, it crashes every time!

  He also chews upward on a gigabyte of disk whenever it crashes!

  Any help to what to do next would be appreciated.

  Success at last!

  I tried all recovery options have no effect.

  THEN I chose "Manuel Upates" on the prior installation options, and installation of all selected components succeeded.

  If you use the default "automatic updates" the printer setup tries to automatically apply the updates before installing, and this causes the immediate accident printer driver setup.

• Stuck on "starting windows" screen during installation of Windows 7

  Hello

  I used windows 10 in dell inspiron13 7000 series. Now, I want to use windows 7 as for my personal use. When I try to boot my laptop with USB stick bootable, because I don't have cd player in my laptop. The problem is when I run the startup it stuck at 'starting windows' screen I can't go any further, so I need force shutdown my laptop. I am unable to install windows 7 on my laptop. What can I do, please help me.

  Thank you.

  Hi Praveen,

  Thanks for posting your question on the Microsoft community.

  We need more information about the issue so that we can help you better.

  1. is Windows 10 still installed on your computer or you have wiped the hard drive?
  2. don't you upgrading from Windows 7 to Windows 10?

  Thank you for details on the issue.

  If Windows 10 is installed, you can downgrade to Windows 7 within 30 days of the upgrade. If it crosses the 30 day limit, the option in the settings that allows you to return to your previous version of Windows will not be available.

  Please see this link:
  Return to Windows 7 or Windows 8.1
  http://Windows.Microsoft.com/en-us/Windows-10/going-back-to-Windows-7-or-Windows-81

  However, if you want to install Windows 7 from an external installation media, you can re-create the rack installation of Windows 7 from this link:
  https://www.Microsoft.com/en-us/software-download/Windows7

  It is possible that the installation media does not develop properly. Please also make sure that you disconnect all the devices connected to the computer before installing Windows 7.

  Note: You may lose programs installed after upgrading Windows 10. I strongly recommend to back up your personal files and data on an external hard drive.

  I hope this information helps.

  Simply answer the required information and let us know if you need more help.

  Thank you

• My hotmail account has been blocked, I've contacted windows live 5 times now and they still don't believe her... I have bills to pay and can't. . any other way to communicate with windows...

  Help, please... My account has been blocked. Ive done what windows application five times now and they do not yet believe its me...

  How can I contact a real person on this issue... my bills are now late and im get bad mark against my name of THEM... becase help... AHHHHHHHH

  Submit all Live queries on the forum right here:

  Windows Live Solution Center
  http://windowslivehelp.com/